GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 6103-2006 |
Test method for cotton defects in raw cotton - HaNd 原棉疵点试验方法 手工法 |
China National Standards Nd |
English PDF |
GB/T 20198-2006 |
Surface active agents - Detergents - Anionic-active matter hydrolyzable uNder alkaline conditions - Determination of hydrolyzable and non-hydrolyzable anionic-active matter 表面活性剂和洗涤剂-在碱性条件下可水解的阴离子活性物-可水解和不可水解阴离子活性物的测定 |
China National Standards Nd |
English PDF |
GB/T 20197-2006 |
Define, classify, marking aNd degradability requirement of degradable plastic 降解塑料的定义、分类、标识和降解性能要求 |
China National Standards Nd |
English PDF |
GB/T 5836.2-2006 |
Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil aNd waste inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管件 |
China National Standards Nd |
English PDF |
GB/T 5836.1-2006 |
Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil aNd waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管材 |
China National Standards Nd |
English PDF |
GB/T 15819-2006 |
Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking iNduced by insert-type fittings - Test method and specification 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 |
China National Standards Nd |
English PDF |
GB/T 6910-2006 |
Methods for analysis of water for boiler aNd for cooling determination of calcium-complexometric titration 锅炉用水和冷却水分析方法 钙的测定 络合滴定法 |
China National Standards Nd |
English PDF |
GB/T 6113.402-2006 |
Specification for radio disturbance aNd immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分:不确定度、统计学和限值建模 测量设备和设施的不确定度 |
China National Standards Nd |
English PDF |
GB/T 20155-2006 |
Determination of mercury, cadmium aNd lead in battery 电池中汞、镉、铅含量的测定 |
China National Standards Nd |
English PDF |
GB/T 20153-2006 |
Classification aNd interpretation of new lighting products 新型照明产品的分类与解释 |
China National Standards Nd |
English PDF |
GB/T 20152-2006 |
StaNdard method of measuring the pinch temperature of quartz-tungsten-halogen lamps 石英卤钨灯压封部位温度的标准测量方法 |
China National Standards Nd |
English PDF |
GB/T 20150-2006 |
Erythema reference action spectrum aNd standard erythema dose 红斑基准反应光谱及标准红斑剂量 |
China National Standards Nd |
English PDF |
GB/T 20149-2006 |
Road traffic lights - Photometric properties of 200mm rouNdel signals 道路交通信号灯 200mm圆形信号灯的光度特性 |
China National Standards Nd |
English PDF |
GB/T 20148-2006 |
Spatial distribution of daylight-CIE staNdard general sky 日光的空间分布 CIE一般标准天空 |
China National Standards Nd |
English PDF |
GB/T 20147-2006 |
CIE staNdard colorimetric observers CIE标准色度观测者 |
China National Standards Nd |
English PDF |
GB/T 20146-2006 |
CIE staNdard illuminants for colorimetry 色度学用CIE标准照明体 |
China National Standards Nd |
English PDF |
GB/T 20145-2006 |
Photobiological safety of lamps aNd lamp systems 灯和灯系统的光生物安全性 |
China National Standards Nd |
English PDF |
GB/T 20144-2006 |
Barrel thread for E14 aNd E27 lampholders with shade holder ring 带灯罩环的E14和E27灯座用筒形螺纹 |
China National Standards Nd |
English PDF |
GB/T 14285-2006 |
Technical code for relaying protection aNd security automatic equipment 继电保护和安全自动装置技术规程 |
China National Standards Nd |
English PDF |
GB/T 6994-2006 |
Electrical installation in ships - Definitions aNd general requirements 船舶电气设备 定义和一般规定 |
China National Standards Nd |
English PDF |
GB/T 20142-2006 |
Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods aNd acceptance criteria 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则 |
China National Standards Nd |
English PDF |
GB/T 20141-2006 |
Overhead electrical coNductors - Formed wire, concentric lay, stranded conductors 型线同心绞架空导线 |
China National Standards Nd |
English PDF |
GB/T 20140-2006 |
Dynamic characteristic aNd vibration measurement method of turbo-generators on stator windings and evaluation criteria 透平型发电机定子绕组端部动态特性和振动试验方法及评定 |
China National Standards Nd |
English PDF |
GB/T 20139-2006 |
Electrical insulation systems - Thermal evaluation of modifications to an established wire-wouNd EIS 电气绝缘结构-对已确定等级的散绕绕组绝缘结构进行组分调整的热评定方法 |
China National Standards Nd |
English PDF |
GB/T 20137-2006 |
Method for determining losses aNd efficiency of three-phase cage induction motors 三相笼型异步电动机损耗和效率的确定方法 |
China National Standards Nd |
English PDF |
GB/T 15468-2006 |
FuNdamental technical requirements for hydraulic turbines 水轮机基本技术条件 |
China National Standards Nd |
English PDF |
GB/T 8650-2006 |
Evaluation of pipeline aNd pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards Nd |
English PDF |
GB/T 20127.9-2006 |
Steel aNd alloy - Determination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第9部分:电感耦合等离子体发射光谱法测定钪含量 |
China National Standards Nd |
English PDF |
GB/T 20127.8-2006 |
Steel aNd alloy - Determination of trace element contents Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第8部分:氢化物发生-原子荧光光谱法测定锑含量 |
China National Standards Nd |
English PDF |
GB/T 20127.7-2006 |
Steel aNd alloy - Determination of trace element contents Part 7: Determination of lead content by oscillopolarographic method 钢铁及合金 痕量元素的测定 第7部分:示波极谱法测定铅含量 |
China National Standards Nd |
English PDF |
GB/T 20127.6-2006 |
Steel aNd alloy - Determination of trace element contents Part 6: Determination of germanium content by gallic acid oscillopolarographic method 钢铁及合金 痕量元素的测定 第6部分:没食子酸-示波极谱法测定锗含量 |
China National Standards Nd |
English PDF |
GB/T 20127.5-2006 |
Steel aNd alloy - Determination of trace element contents Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method 钢铁及合金 痕量元素的测定 第5部分:萃取分离-罗丹明B光度法 测定镓含量 |
China National Standards Nd |
English PDF |
GB/T 20127.4-2006 |
Steel aNd alloy - Determination of trace element contents Part 4: Determination of copper content by graphite furnace atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第4部分:石墨炉原子吸收光谱法测定铜含量 |
China National Standards Nd |
English PDF |
GB/T 20127.3-2006 |
Steel aNd alloy - Determination of trace element contents Part3:Determination of calcium,magnesium,barium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第3部分:电感耦合等离子体发射光谱法测定钙、镁和钡含量 |
China National Standards Nd |
English PDF |
GB/T 20127.2-2006 |
Steel aNd alloy - Determination of trace element contents Part2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第2部分:氢化物发生-原子荧光光谱法 测定砷含量 |
China National Standards Nd |
English PDF |
GB/T 20127.13-2006 |
Steel aNd alloy - Determination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method 钢铁及合金 痕量元素的测定 第13部分:碘化物萃取-苯基荧光酮光度法测定锡含量 |
China National Standards Nd |
English PDF |
GB/T 20127.12-2006 |
Steel aNd alloy - Determination of trace element contents Part 12: Determination of zinc content by flame atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第12部分:火焰原子吸收光谱法测定锌含量 |
China National Standards Nd |
English PDF |
GB/T 20127.1-2006 |
Steel aNd alloy - Determination of trace element contents Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第1部分:石墨炉原子吸收光谱法测定银含量 |
China National Standards Nd |
English PDF |
GB/T 20127.11-2006 |
Steel aNd alloy - Determination of trace element contents Part 11: Determination of indium and thallium content by inductively coupled plasma-mass spectrometric method 钢铁及合金 痕量元素的测定 第11部分:电感耦合等离子体质谱法测定铟和铊含量 |
China National Standards Nd |
English PDF |
GB/T 20127.10-2006 |
Steel aNd alloy - Determination of trace element contents Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第10部分:氢化物发生-原子荧光光谱法测定硒含量 |
China National Standards Nd |
English PDF |
GB/T 20126-2006 |
Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an iNduction furnace (with preheating) 非合金钢 低碳含量的测定 第2部分:感应炉(经预加热)内燃烧后红外吸收法 |
China National Standards Nd |
English PDF |
GB/T 20125-2006 |
Low-alloy steel - Determination of multi-element contents - INductively coupled plasma atomic emission spectrometric method 低合金钢 多元素的测定 电感耦合等离子体发射光谱法 |
China National Standards Nd |
English PDF |
GB/T 20124-2006 |
Steel aNd iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 钢铁 氮含量的测定 惰性气体熔融热导法(常规方法) |
China National Standards Nd |
English PDF |
GB/T 20123-2006 |
Steel aNd iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 钢铁 总碳硫含量的测定 高频感应炉燃烧后红外吸收法(常规方法) |
China National Standards Nd |
English PDF |
GB/T 20122-2006 |
Corrosion of metals aNd alloys -- Evaluation of stress corrosion cracking by the drop evaporation test 金属和合金的腐蚀 滴落蒸发试验的应力腐蚀开裂评价 |
China National Standards Nd |
English PDF |
GB/T 20121-2006 |
Corrosion of metals aNd alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) 金属和合金的腐蚀 人造气氛的腐蚀试验 间歇盐雾下的室外加速试验(疮痂试验) |
China National Standards Nd |
English PDF |
GB/T 20120.2-2006 |
Corrosion of metals aNd alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens 金属和合金的腐蚀 腐蚀疲劳试验 第2部分:预裂纹试验裂纹扩展试验 |
China National Standards Nd |
English PDF |
GB/T 20120.1-2006 |
Corrosion of metals aNd alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing 金属和合金的腐蚀 腐蚀疲劳试验 第1部分:循环失效试验 |
China National Standards Nd |
English PDF |
GB/T 11261-2006 |
Steel aNd iron Determination of oxygen content The pulse heating inert gas fusion-infra-red absorption method 钢铁 氧含量的测定 脉冲加热惰气熔融-红外线吸收法 |
China National Standards Nd |
English PDF |
GB/T 20131-2006 |
Calibration aNd usage of α/β gas proportional counters α/β流气式正比计数器的标定和使用 |
China National Standards Nd |
English PDF |
GB/T 10263-2006 |
Environmental coNditions and test procedures for nuclear radiation detectors 核辐射探测器环境条件与试验方法 |
China National Standards Nd |
English PDF |
GB 20266-2006 |
Rubber iNdustrial boots with chemical resistance 耐化学品的工业用橡胶靴 |
China National Standards Nd |
English PDF |
GB 20265-2006 |
Moulded plastics iNdustrial boots with chemical resistance 耐化学品的工业用模压塑料靴 |
China National Standards Nd |
English PDF |
GB/T 20193-2006 |
Bone meal, meat aNd bone meal for feedstuffs 饲料用骨粉及肉骨粉 |
China National Standards Nd |
English PDF |
GB/T 20204-2006 |
General testing specification of automatic system equipment for water resources aNd hydrology 水利水文自动化系统设备检验测试通用技术规范 |
China National Standards Nd |
English PDF |
GB 14681.2-2006 |
Electrically heated glazing materials for railway rolling stock aNd ship Part 2: Electrically heated glazing materials for railway rolling stock 机车船舶用电加温玻璃 第2部分:机车电加温玻璃 |
China National Standards Nd |
English PDF |
GB 14681.1-2006 |
Electrically heated glazing materials for locomotives aNd ships Part 1: Heated glass panes for ships’ rectangular windows 机车船舶用电加温玻璃 第1部分:船用矩形窗电加温玻璃 |
China National Standards Nd |
English PDF |
GB/T 10700-2006 |
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - BeNding method 精细陶瓷弹性模量试验方法 弯曲法 |
China National Standards Nd |
English PDF |
GB/T 20110-2006 |
Hydraulic fluid power - Cleanliness of parts aNd components - Inspection document and principles related to contaminant collection,analysis and data reporting 液压传动 零件和元件的清洁度 与污染物的收集、分析和数据报告相关的检验文件和准则 |
China National Standards Nd |
English PDF |
GB/T 20108-2006 |
Low temperature unitary air coNditioners 低温单元式空调机 |
China National Standards Nd |
English PDF |
GB/T 20107-2006 |
Absorption water chiller(heater) for villa aNd similar application 户用及类似用途的吸收式冷(热)水机 |
China National Standards Nd |
English PDF |
GB/T 10044-2006 |
Welding electrodes aNd rods for cast iron 铸铁焊条及焊丝 |
China National Standards Nd |
English PDF |
GB/T 20106-2006 |
General principles of stipulating the assessment iNdicator frame of cleaner production for industries 工业清洁生产评价指标体系编制通则 |
China National Standards Nd |
English PDF |
GB/T 20104-2006 |
Method for identifying teNdency of coal to spontaneous combustion by oxygen absorption with chromatograph 煤自燃倾向性色谱吸氧鉴定法 |
China National Standards Nd |
English PDF |
GB/T 15335-2006 |
Determination of leakage rate aNd specific resistance for air duct 风筒漏风率和风阻的测定方法 |
China National Standards Nd |
English PDF |
GB/T 3787-2006 |
Technical safety code for management, operation, inspection aNd maintenance of hand-held motor-operated electric tools 手持式电动工具的管理、使用、检查和维修安全技术规程 |
China National Standards Nd |
English PDF |
GB/T 2423.55-2006 |
Environmental testing for electric aNd electronic products - Part 2: Test methods - Test Eh: Hammer tests 电工电子产品环境试验 第2部分: 环境测试 试验Eh:锤击试验 |
China National Standards Nd |
English PDF |
GB/T 20114-2006 |
Specific test methods for d.c. machines on conventional aNd rectifier-fed supplies 普通电源或整流电源供电直流电机的特殊试验方法 |
China National Standards Nd |
English PDF |
GB/T 17948.3-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wouNd windings - Thermal evaluation and classification of insulation sysyems used in machines up to and including 50MVA and 15kV 旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构热评定和分级 |
China National Standards Nd |
English PDF |
GB/T 17948.2-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wouNd windings - Classification of changes and insulation component substitutions 旋转电机绝缘结构功能性评定 散绕绕组试验规程 变更和绝缘组分替代的分级 |
China National Standards Nd |
English PDF |
GB/T 1410-2006 |
Methods of test for volume resistivity aNd surface resistivity of solid electrical insulating materials 固体绝缘材料体积电阻率和表面电阻率试验方法 |
China National Standards Nd |
English PDF |
GB/T 1409-2006 |
RecommeNded methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths 测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法 |
China National Standards Nd |
English PDF |
GB/T 10581-2006 |
Method of test for electrical resistance aNd resistivity of insulating materials at elevated temperatures 绝缘材料在高温下电阻和电阻率的试验方法 |
China National Standards Nd |
English PDF |
GB 13078.2-2006 |
Hygienical staNdard for in feeds Toleration of ochratoxin A and zearalenone in feeds 饲料卫生标准 饲料中赭曲霉毒素A和玉米赤霉烯酮的允许量 |
China National Standards Nd |
English PDF |
GB 13078.1-2006 |
Hygienical staNdard for feed - Limited content of nitrite in feeds 饲料卫生标准 饲料中亚硝酸盐允许量 |
China National Standards Nd |
English PDF |
GB/T 3871.5-2006 |
Agricultural tractors - Test procedures - Part 5: Turning aNd clearance diameters 农业拖拉机 试验规程 第5部分:转向圆和通过圆直径 |
China National Standards Nd |
English PDF |
GB/T 3810.4-2006 |
Test methods of ceramic tiles Part 4: Determination of modulus of rupture aNd breaking strength 陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定 |
China National Standards Nd |
English PDF |
GB/T 3810.3-2006 |
Test method of ceramic tiles Part 3: Determination of water absorption, apparent porosity, apparent relative density aNd bulk density 陶瓷砖试验方法 第3部分:吸水率、显气孔率、表观相对密度和容重的测定 |
China National Standards Nd |
English PDF |
GB/T 3810.2-2006 |
Test methods of ceramic tiles Part 2: Determination of dimensions aNd surface quality 陶瓷砖试验方法 第2部分:尺寸和表面质量的检验 |
China National Standards Nd |
English PDF |
GB/T 3810.15-2006 |
Test methods of ceramic tiles Part 15: Determination of lead aNd cadmium given off by glazed tiles 陶瓷砖试验方法 第15部分:有釉砖铅和镉溶出量的测定 |
China National Standards Nd |
English PDF |
GB/T 3810.1-2006 |
Test methods of ceramic tiles Part 1: Sampling aNd basis for acceptance 陶瓷砖试验方法 第1部分:抽样和接收条件 |
China National Standards Nd |
English PDF |
GB 14892-2006 |
Noise limit aNd measurement for train of urban rail transit 城市轨道交通列车噪声限值和测量方法 |
China National Standards Nd |
English PDF |
GB 14227-2006 |
Acoustical requirement aNd measurement on station platform of urban rail transit 城市轨道交通车站站台声学要求和测量方法 |
China National Standards Nd |
English PDF |
GB/T 8243.5-2006 |
Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation aNd hydraulic pulse durability test 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验 |
China National Standards Nd |
English PDF |
GB/T 20064.2-2006 |
Reciprocating internal combustion engines - HaNdle starting equipment - Part 2: Method of testing the angle of disengagement 往复式内燃机 手柄起动装置 第2部分:脱开角试验方法 |
China National Standards Nd |
English PDF |
GB/T 20064.1-2006 |
Reciprocating internal combustion engines - HaNdle starting equipment - Part 1: Safety requirements and tests 往复式内燃机 手柄起动装置 第1部分:安全要求和试验 |
China National Standards Nd |
English PDF |
GB/T 14099.9-2006 |
Gas turbines - procurement - Part 9: Reliability, availability, maintainability aNd safety 燃气轮机 采购 第9部分:可靠性、可用性、可维护性和安全性 |
China National Standards Nd |
English PDF |
GB/T 20094-2006 |
Code of hygienic practice for abattoir aNd meat processing establishment 屠宰和肉类加工企业卫生管理规范 |
China National Standards Nd |
English PDF |
GB/T 20063.9-2006 |
Graphical symbols for diagrams -Part 9: Pumps, compressors aNd fans 简图用图形符号 第9部分:泵、压缩机与鼓风机 |
China National Standards Nd |
English PDF |
GB/T 20063.8-2006 |
Graphical symbols for diagrams -Part 8: Valves aNd dampers 简图用图形符号 第8部分:阀与阻尼器 |
China National Standards Nd |
English PDF |
GB/T 20063.6-2006 |
Graphical symbols for diagrams -Part 6: Measurement aNd control functions 简图用图形符号 第6部分:测量与控制功能 |
China National Standards Nd |
English PDF |
GB/T 20063.5-2006 |
Graphical symbols for diagrams -Part 5: Measurement aNd control devices 简图用图形符号 第5部分:测量与控制装置 |
China National Standards Nd |
English PDF |
GB/T 20063.4-2006 |
Graphical symbols for diagrams -Part 4: Actuators aNd related devices 简图用图形符号 第4部分:调节器及其相关设备 |
China National Standards Nd |
English PDF |
GB/T 20063.3-2006 |
Graphical symbols for diagrams -Part 3: Connections aNd related devices 简图用图形符号 第3部分:连接件与有关装置 |
China National Standards Nd |
English PDF |
GB/T 20063.12-2006 |
Graphical symbols for diagrams -Part 12: Devices for separating purification aNd mixing 简图用图形符号 第12部分:分离、净化和混合的装置 |
China National Standards Nd |
English PDF |
GB/T 20063.1-2006 |
Graphical symbols for diagrams -Part 1: General information aNd indexes 简图用图形符号 第1部分:通用信息与索引 |
China National Standards Nd |
English PDF |
GB/T 20063.11-2006 |
Graphical symbols for diagrams -Part 11: Devices for heat transfer aNd heat engines 简图用图形符号 第11部分:热交换器和热发动机器件 |
China National Standards Nd |
English PDF |
GB/T 8706-2006 |
Steel wire ropes - Vocabulary, designation aNd classification 钢丝绳-术语、标记和分类 |
China National Standards Nd |
English PDF |
GB/T 6060.2-2006 |
Roughness comparison specimens - GrouNd, turned, bored, milled, shaped and planed 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 |
China National Standards Nd |
English PDF |
GB/T 20066-2006 |
Steel aNd iron -- Sampling and preparation of samples for the determination of chemical composition 钢和铁 化学成分测定用试样的取样和制样方法 |
China National Standards Nd |
English PDF |
Find out:27370Items | To Page of: First -Previous-Next -Last | [224] [225] [226] [227] [228] [229] [230] |