GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 18852-2002 |
Ultrasonic non-destructive testing--Reference blocks aNd test procedures for thc characterization of contact search unit beam profiles 无损检测 超声检验 测量接触探头声束特性的参考试块和方法 |
China National Standards Nd |
English PDF |
GB/T 18850-2002 |
INdustrial wire screens--Technical requirements and testing 工业用金属丝筛网 技术要求和检验 |
China National Standards Nd |
English PDF |
GB/T 10412-2002 |
Grooved pulleys for classical aNd narrow V-belts (system based on datum width) 普通和窄V带轮(基准宽度制) |
China National Standards Nd |
English PDF |
GB/Z 18859-2002 |
Enclosed low-voltage switchgaer aNd controlgaer Assemblies--Guide for testing under conditions of arcing due to internal fault 封闭式低压成套开关设备和控制设备在内部故障引起电弧情况下的试验导则 |
China National Standards Nd |
English PDF |
GB/T 4988-2002 |
Ratings of frequency,voltage aNd current of electric products for ships and offshore units 船舶和近海装置用电工产品的额定频率 额定电压 额定电流 |
China National Standards Nd |
English PDF |
GB 18871-2002 |
Basic staNdards for protection against ionizing radiation and for the safety of radiation sources 电离辐射防护与辐射源安全基本标准 |
China National Standards Nd |
English PDF |
GB/T 7139-2002 |
Plastics--Vinyl chloride homopolymers aNd copolymers--Determination of chlorine content 塑料 氯乙烯均聚物和共聚物 氯含量的测定 |
China National Standards Nd |
English PDF |
GB/T 3400-2002 |
Plastics--Homopolymer aNd copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature 塑料 通用型氯乙烯均聚和共聚树脂 室温下增塑剂吸收量的测定 |
China National Standards Nd |
English PDF |
GB/T 2947-2002 |
Determination of free water in urea aNd ammonium nitrate by karl fischer method 尿素、硝酸铵中游离水含量的测定 卡尔·费休法 |
China National Standards Nd |
English PDF |
GB/T 18848-2002 |
Basic data structure aNdclassifying codes for women of reproductive age information system 育龄妇女信息系统(WIS)基础数据结构与分类代码 |
China National Standards Nd |
English PDF |
GB/T 18868-2002 |
Method for determination of moisture,crude protein,crude fat,crude fibre,lysine aNd methinione in feeds--Near infrared reflectance spectroscopy 饲料中水分、粗蛋白质、粗纤维、粗脂肪、赖氨酸、蛋氨酸快速测定 近红外光谱法 |
China National Standards Nd |
English PDF |
GB/T 18522.5-2002 |
General specification forhydrometric instruments--Part 5:The operating coNdition’s influences and test method 水文仪器通则 第5部分:工作条件影响及试验方法 |
China National Standards Nd |
English PDF |
GB/T 18522.2-2002 |
General specification for hydrometric instruments--Part 2:Referential operating coNdition 水文仪器通则 第2部分:参比工作条件 |
China National Standards Nd |
English PDF |
GB/T 50331-2002 |
The staNdard of water quantity for city’s residential use 城市居民生活用水量标准 |
China National Standards Nd |
English PDF |
GB/T 3933.3-2002 |
Test coNditions for milling machines with table of variable height--Testing of accuracy--Part 3:Machines with vertical spindle 升降台铣床检验条件 精度检验 第3部分:立式铣床 |
China National Standards Nd |
English PDF |
GB/T 3933.2-2002 |
Test coNditions for milling machines with table of variable height--Testing of accuracy--Part 2:Machines with horizontal spindle 升降台铣床检验条件 精度检验 第2部分:卧式铣床 |
China National Standards Nd |
English PDF |
GB/T 18844-2002 |
Plain bearings--Terms,characteristics aNd causes of damage and changes in appearance 滑动轴承 损坏和外观变化的术语、特征及原因 |
China National Standards Nd |
English PDF |
GB/T 11270.2-2002 |
Abrasive products--DiamoNd circular saw blade--Part 2:Sintered saw blades 超硬磨料制品 金刚石圆锯片 第2部分:烧结锯片 |
China National Standards Nd |
English PDF |
GB/T 11270.1-2002 |
Abrasive products--DiamoNd circular saw blade--Part 1:Welded saw blades 超硬磨料制品 金刚石圆锯片 第1部分:焊接锯片 |
China National Standards Nd |
English PDF |
GB/T 18839.3-2002 |
Preparation of steel substrates before application of paints aNd related products--Surface preparation methods--Hand-and power-tool cleaning 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理 |
China National Standards Nd |
English PDF |
GB/T 18839.2-2002 |
Preparation of steel substrates before application of paints aNd related products--Surface preparation methods--Abrasive blast-cleaning 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理 |
China National Standards Nd |
English PDF |
GB/T 18839.1-2002 |
Preparation of steel substrates before application of paints aNd related products--Surface preparation methods--General principles 涂覆涂料前钢材表面处理 表面处理方法 总则 |
China National Standards Nd |
English PDF |
GB/T 18838.1-2002 |
Preparation of steel substrates before application of paints aNd related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类 |
China National Standards Nd |
English PDF |
GB/T 17850.1-2002 |
Preparation of steel substrates before application of paints aNd related products--Specifications for non-metallic blast-cleaning abrasives--General introductionand classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类 |
China National Standards Nd |
English PDF |
GB/T 6461-2002 |
Methodsfor corrosion testing of metallic aNd other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards Nd |
English PDF |
GB/T 18837-2002 |
Multi-connected air-coNdition(heat-pump) unit 多联式空调(热泵)机组 |
China National Standards Nd |
English PDF |
GB/T 18836-2002 |
Ducted air-coNditioning(heat pump) units 风管送风式空调(热泵)机组 |
China National Standards Nd |
English PDF |
GB/T 1508-2002 |
Manganese ores--Determination of total iron content--Potassium dichromate titrimetric method aNd 1,10-phenanthroline spectrophotometric method 锰矿石 全铁含量的测定 重铬酸钾滴定法和邻菲啰啉分光光度法 |
China National Standards Nd |
English PDF |
GB/T 1506-2002 |
Manganese ores--Determination of manganese content--Potentiometric method aNd ammonium iron (II) sulphate titrimetric method 锰矿石 锰含量的测定 电位滴定法和硫酸亚铁铵滴定法 |
China National Standards Nd |
English PDF |
GB/T 12599-2002 |
Metallic coatings--Electroplated coatings of tin--Specification aNd test methods 金属覆盖层 锡电镀层 技术规范和试验方法 |
China National Standards Nd |
English PDF |
GB/T 18832-2002 |
Box pallet aNd post pallet 箱式、立柱式托盘 |
China National Standards Nd |
English PDF |
GB/T 4336-2002 |
StaNdard testmethod for spark discharge atomic emission--Spectrometric analysis of carbon and low-alloy steel(routine method) 碳素钢和中低合金钢 火花源原子发射光谱分析方法(常规法) |
China National Standards Nd |
English PDF |
GB/T 18827-2002 |
1,1-Dichloro-1-fluoroethane for iNdustrial use 工业用1,1-二氯-1-氟乙烷(HCFC-141b) |
China National Standards Nd |
English PDF |
GB/T 18826-2002 |
1,1,1,2-Tetrafluoroethane for iNdustrial use 工业用1,1,1,2-四氟乙烷(HFC-134a) |
China National Standards Nd |
English PDF |
GB/T 18825-2002 |
Cyclopentane for iNdustrial use 工业用环戊烷 |
China National Standards Nd |
English PDF |
GB/T 18266.2-2002 |
Ranking staNdard for sports facilities--Part 2:Star-rating standard for gymnasium 体育场所等级的划分 第2部分:健身房星级的划分及评定 |
China National Standards Nd |
English PDF |
GB/T 461.1-2002 |
Paper aNd board--Determination ofcapillary rise--Klemm methods 纸和纸板毛细吸液高度的测定(克列姆法) |
China National Standards Nd |
English PDF |
GB/T 10739-2002 |
Paper,board aNd pulps--Standard atmosphere for conditioning and testing 纸、纸板和纸浆试样处理和试验的标准大气条件 |
China National Standards Nd |
English PDF |
GB/T 459-2002 |
Paper aNd board--Determination of demensional instability 纸和纸板伸缩性的测定 |
China National Standards Nd |
English PDF |
GB/T 5620-2002 |
Road vehicles--Braking of automotive vehicles aNd their trailers--Vocabulary 道路车辆 汽车和挂车 制动名词术语及其定义 |
China National Standards Nd |
English PDF |
GB/T 18818-2002 |
Inspecting specification for railway wagon dumper aNd bulk cargo unfreezing warehouse 铁路货车翻车机和散装货物解冻库检测技术条件 |
China National Standards Nd |
English PDF |
GB/T 7635.2-2002 |
National central product classification aNd code--Part 2:Non-transportable product 全国主要产品分类与代码 第2部分:不可运输产品 |
China National Standards Nd |
English PDF |
GB/T 7635.1-2002 |
National central product classification aNd code--Part 1:Transportable product 全国主要产品分类与代码 第1部分:可运输产品 |
China National Standards Nd |
English PDF |
GB/T 17703.1-2002 |
International movement of goods governmental regulatory message--Part 1:United Nations staNdard--International movement of goods governmental regulatory message 国际物流政府管理报文 第1部分:联合国标准国际物流政府管理报文 |
China National Standards Nd |
English PDF |
GB/T 2820.9-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part9:Measurement aNd evaluation of mechanical vibrations 往复式内燃机驱动的交流发电机组 第9部分:机械振动的测量和评价 |
China National Standards Nd |
English PDF |
GB/T 2820.8-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part 8:Requirements aNd tests for low-power generating sets 往复式内燃机驱动的交流发电机组 第8部分:对小功率发电机组的要求和试验 |
China National Standards Nd |
English PDF |
GB/T 16895.17-2002 |
Eletrical installations of buildings--Part 5:Selection aNd erection of electrical equipment--Section 548:Earthing arrangements and equipotential bonding for information technology installations 建筑物电气装置 第5部分:电气设备的选择和安装 第548节:信息技术装置的接地配置和等电位联结 |
China National Standards Nd |
English PDF |
GB 16895.19-2002 |
Electrical installations of buildings--Part 7:Requirements for special installations or locations--Section 702:Swimming pools aNd other basins 建筑物电气装置 第7部分:特殊装置或场所的要求 第702节:游泳池和其他水池 |
China National Standards Nd |
English PDF |
GB/T 5094.1-2002 |
INdustrial systems,installations and equipment and industrial products--Structuring principles and reference designations--Part 1:Basic rules 工业系统、装置与设备以及工业产品结构原则与参照代号 第1部分:基本规则 |
China National Standards Nd |
English PDF |
GB/T 456-2002 |
Paper aNd board--Determination of smoothness (Bekk method) 纸和纸板平滑度的测定(别克法) |
China National Standards Nd |
English PDF |
GB/T 455-2002 |
Paper aNd board--Determination of tearing resistance 纸和纸板撕裂度的测定 |
China National Standards Nd |
English PDF |
GB/T 18782-2002 |
Determination of 3-chloro-1,2-propaNdiol in condiments 调味品中3-氯-1,2-丙二醇的测定 |
China National Standards Nd |
English PDF |
GB/T 9632.1-2002 |
Measuring methods of cores for iNductors and transformers for telecommunications 通信用电感器和变压器磁心测量方法 |
China National Standards Nd |
English PDF |
GB/T 8052-2002 |
Single aNd multi-level continuous sampling procedures and tables for inspection by attributes 单水平和多水平计数连续抽样检验程序及表 |
China National Standards Nd |
English PDF |
GB/T 7027-2002 |
Basic principles aNd methods for information classifying and coding 信息分类和编码的基本原则与方法 |
China National Standards Nd |
English PDF |
GB/T 18792-2002 |
Information technology--Document description aNd processing languages--HyperText Markup Language(HTML) 信息技术 文件描述和处理语言 超文本置标语言(HTML) |
China National Standards Nd |
English PDF |
GB/T 18791-2002 |
Test methods for ceramic properties for electronic aNd electrical application 电子和电气陶瓷性能试验方法 |
China National Standards Nd |
English PDF |
GB/T 16656.34-2002 |
INdustrial automation systems and integration--Product data representation and exchange--Part 34:Conformance testing methodology and framework:Abstract test methods for application protocol implementations 工业自动化系统与集成 产品数据的表达与交换 第34部分:一致性测试方法论与框架:应用协议实现的抽象测试方法 |
China National Standards Nd |
English PDF |
GB/T 12908-2002 |
Information technology--Automatic identification aNd data capture technique--Bar code symbology specifications--Code 39 信息技术 自动识别和数据采集技术 条码符号规范 三九条码 |
China National Standards Nd |
English PDF |
GB/T 18780.1-2002 |
Geometrical product specifications(GPS)--Geometrical features--Part 1:General terms aNd definitions 产品几何量技术规范(GPS) 几何要素 第1部分:基本术语和定义 |
China National Standards Nd |
English PDF |
GB/T 18779.1-2002 |
Geometrical product specifications (GPS)--Inspection by measurement of workpieces aNd measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第1部分:按规范检验合格或不合格的判定规则 |
China National Standards Nd |
English PDF |
GB/T 18778.1-2002 |
Geometrical product specifications(GPS)--Surface texture:Profile method;Surfaces having stratified functional properties--Part 1:Filtering aNd general measurement conditions 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第1部分:滤波和一般测量条件 |
China National Standards Nd |
English PDF |
GB/T 18776-2002 |
Tolerance dimensions--Conversion form inches into millimetres aNd vice versa 公差尺寸 英寸和毫米的互换算 |
China National Standards Nd |
English PDF |
GB/T 16857.1-2002 |
Geometrical product specification(GPS)--Acceptance aNd reverification tests for coordinate measuring machines--Part 1:Vocabulary 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第1部分:词汇 |
China National Standards Nd |
English PDF |
GB/T 15757-2002 |
Geometrical product specifications(GPS)--Surface imperfections--Terms,definitions aNd parameters 产品几何量技术规范(GPS) 表面缺陷 术语、定义及参数 |
China National Standards Nd |
English PDF |
GB/T 6728-2002 |
Cold formed steel hollow sections for general structure--Dimensions,shapes,weight aNd permissible deviations 结构用冷弯空心型钢 尺寸、外形、重量及允许偏差 |
China National Standards Nd |
English PDF |
GB/T 4751-2002 |
Specification for check aNd acceptance of the quality for household anerobie digesters 户用沼气池质量检查验收规范 |
China National Standards Nd |
English PDF |
GB/T 4750-2002 |
The collection of staNdard design drawings for household anerobie digesters 户用沼气池标准图集 |
China National Standards Nd |
English PDF |
GB/T 18760-2002 |
Methods aNd requirements of after-sale services of consumer goods 消费品售后服务方法与要求 |
China National Standards Nd |
English PDF |
GB/T 2829-2002 |
Sampling proceduresaNd tables for periodic inspection by attributes (Apply to inspection of process stability) 周期检验计数抽样程序及表(适用于对过程稳定性的检验) |
China National Standards Nd |
English PDF |
GB/T 18755.1-2002 |
INdustrial automation systems--Manufacturing automation programming environment (MAPLE)--Functional architecture 工业自动化系统 制造自动化编程环境(MAPLE) 功能体系结构 |
China National Standards Nd |
English PDF |
GB/T 16656.520-2002 |
INdustrial automation systems and integration--Product data representation and exchange--Part 520:Application interpreted construct:Associative draughting elements 工业自动化系统与集成 产品数据的表达与交换 第520部分:应用解释构造:相关绘图元素 |
China National Standards Nd |
English PDF |
GB/T 7111.7-2002 |
Textile machinery--Noise test code--Part 7:Dyeing aNd finishing machinery 纺织机械噪声测试规范 第7部分:染整机械 |
China National Standards Nd |
English PDF |
GB/T 7111.5-2002 |
Textile machinery--Noise test code--Part 5:Weaving aNd knitting preparatory machinery 纺织机械噪声测试规范 第5部分:机织和针织准备机械 |
China National Standards Nd |
English PDF |
GB/T 7111.4-2002 |
Textile machinery--Noise test code--Part 4:Yarn processing,cordage aNd rope manufacturing machinery 纺织机械噪声测试规范 第4部分:纱线加工、绳索加工机械 |
China National Standards Nd |
English PDF |
GB/T 7111.2-2002 |
Textile machinery--Noise test code--Part 2:Spinning preparatory aNd spinning machinery 纺织机械噪声测试规范 第2部分:纺前准备和纺部机械 |
China National Standards Nd |
English PDF |
GB/T 6297-2002 |
StaNdard test method for differential thermal analysis of row materials of ceramic 陶瓷原料差热分析方法 |
China National Standards Nd |
English PDF |
GB/T 451.3-2002 |
Paper aNd board--Determination of thickness 纸和纸板厚度的测定 |
China National Standards Nd |
English PDF |
GB/T 451.2-2002 |
Paper aNd board--Determination of grammage 纸和纸板定量的测定 |
China National Standards Nd |
English PDF |
GB/T 451.1-2002 |
Paper aNd board--Determination of size and deviation 纸和纸板尺寸及偏斜度的测定 |
China National Standards Nd |
English PDF |
GB/T 3534-2002 |
StaNdard testing methods for lead andcadmium release from domestic ceramic 日用陶瓷器铅、镉溶出量的测定方法 |
China National Standards Nd |
English PDF |
GB/T 10811-2002 |
UNder(in)-glaze decoration porcelain 釉下(中)彩日用瓷器 |
China National Standards Nd |
English PDF |
GB/T 18762-2002 |
Filler precious metal aNd their alloy brazing materials 贵金属及其合金钎料 |
China National Standards Nd |
English PDF |
GB/T 6122.2-2002 |
Corner-rouNding cutters--Part 2:The technical specifications 圆角铣刀 第2部分:技术条件 |
China National Standards Nd |
English PDF |
GB/T 6122.1-2002 |
Corner-rouNding cutters--Part 1:The types and dimensions 圆角铣刀 第1部分:型式和尺寸 |
China National Standards Nd |
English PDF |
GB/T 18736-2002 |
Mineral admixtures for high strength aNd high performance concrete 高强高性能混凝土用矿物外加剂 |
China National Standards Nd |
English PDF |
GB/T 1119.1-2002 |
Flat relieved tooth slotting cutters--Part 1:The types aNd dimensions 尖齿槽铣刀 第1部分:型式和尺寸 |
China National Standards Nd |
English PDF |
GB/T 1115.2-2002 |
CyliNdrical cutters--Part 2:The technicalspecifications 圆柱形铣刀 第2部分:技术条件 |
China National Standards Nd |
English PDF |
GB/T 1115.1-2002 |
CyliNdrical cutters--Part 1:The types and dimensions 圆柱形铣刀 第1部分:型式和尺寸 |
China National Standards Nd |
English PDF |
GB/T 18742.3-2002 |
Polypropylene piping systems for hot aNd cold water installations--Part 3:Fittings 冷热水用聚丙烯管道系统 第3部分:管件 |
China National Standards Nd |
English PDF |
GB/T 18742.2-2002 |
Polypropylene piping systems for hot aNd cold water installations--Part 2:Pipes 冷热水用聚丙烯管道系统 第2部分:管材 |
China National Standards Nd |
English PDF |
GB/T 18742.1-2002 |
Polypropylene piping systems for hot aNd cold water installations--Part 1:General 冷热水用聚丙烯管道系统 第1部分:总则 |
China National Standards Nd |
English PDF |
GB/T 18741-2002 |
Health staNdard of architectural design in school for the blind 盲学校建筑设计卫生标准 |
China National Standards Nd |
English PDF |
GB/T 18737.1-2002 |
Textile machinery aNd accessories--Beams for winding--Part 1:General vocabulary 纺织机械与附件 经轴 第1部分:词汇 |
China National Standards Nd |
English PDF |
GB/T 9349-2002 |
Determination of thermal stabitity of poly(vinyl chloride) related chlorine-containing homopolymers aNd copolymers and their compounds--Discoloration method 聚氯乙烯、相关含氯均聚物和共聚物及其共混物热稳定性的测定 变色法 |
China National Standards Nd |
English PDF |
GB/T 4850-2002 |
Test method for unwiNding force of pressure sensitive adhesive tapes at low speed 压敏胶粘带低速解卷强度的测定 |
China National Standards Nd |
English PDF |
GB/T 4553-2002 |
Sodium nitrate for iNdustrial use 工业硝酸钠 |
China National Standards Nd |
English PDF |
GB/T 2917.1-2002 |
Determination of compouNds and products based on vingl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevoted temperatures--Congo red method 以氯乙烯均聚和共聚物为主的共混物及制品在高温时放出氯化氢和任何其他酸性产物的测定 刚果红法 |
China National Standards Nd |
English PDF |
GB/T 18747.2-2002 |
The determination of shear strength of anaerobic adhesives using pin-aNd-collar specimens 厌氧胶粘剂剪切强度的测定(轴和套环试验法) |
China National Standards Nd |
English PDF |
GB/Z 18732-2002 |
Determination of limits for iNdustrial,scientific and medical equipment 工业、科学和医疗设备限值的确定方法 |
China National Standards Nd |
English PDF |
Find out:27370Items | To Page of: First -Previous-Next -Last | [240] [241] [242] [243] [244] [245] [246] |