GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 43432.2-2023 |
Metallic materials - Barcol hardness test - PArt 2: Inspection and calibration of hardness testers 金属材料 巴氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards PA |
English PDF |
GB/T 43407.3-2023 |
Road vehicles - Ergonomic requirements for driving areas of low-floor PAssenger buses running on dedicated lines - Part 3: Information devices and controls 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第3部分:信息装置和控制器 |
China National Standards PA |
English PDF |
GB/T 43407.1-2023 |
Road vehicles Ergonomic requirements for driving areas of low-floor PAssenger buses running on dedicated lines Part 1: General description and basic requirements 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第1部分:总体描述和基本要求 |
China National Standards PA |
English PDF |
GB/T 43402-2023 |
PAssenger car driver's hand control area 乘用车 驾驶员手控制区域 |
China National Standards PA |
English PDF |
GB/T 43401.1-2023 |
Road vehicles - Stabilizers for trailers and light trailers - PArt 1: Integrated 道路车辆 旅居挂车和轻型挂车稳定装置 第1部分:集成式 |
China National Standards PA |
English PDF |
GB/T 43399-2023 |
Road Vehicles Liquefied Natural Gas (LNG) Filling Connector 3.1MPA Connector 道路车辆 液化天然气(LNG)加注连接器 3.1MPa连接器 |
China National Standards PA |
English PDF |
GB/T 43398-2023 |
Safety requirements for injuries to PAssengers caused by baggage movement in passenger cars 乘用车行李移动对乘员伤害的安全要求 |
China National Standards PA |
English PDF |
GB/T 43258.4-2023 |
Road vehicles Diagnostic communications over Internet Protocol (DoIP) PArt 4: Ethernet-based high-speed data link connectors 道路车辆 基于因特网协议的诊断通信 (DoIP) 第4部分: 基于以太网的高速数据链路连接器 |
China National Standards PA |
English PDF |
GB/T 43258.3-2023 |
Road vehicles Diagnostic communications over Internet Protocol (DoIP) PArt 3: Wired vehicle interface based on IEEE 802.3 道路车辆 基于因特网协议的诊断通信(DoIP) 第3部分:基于IEEE 802.3有线车辆接口 |
China National Standards PA |
English PDF |
GB/T 43258.2-2023 |
Road vehicles Diagnostic communications over Internet Protocol (DoIP) PArt 2: Transport protocols and network layer services 道路车辆 基于因特网协议的诊断通信(DoIP) 第2部分:传输协议与网络层服务 |
China National Standards PA |
English PDF |
GB/T 43253.4-2023 |
Road vehicles Functional safety audit and assessment methods PArt 4: Hardware level 道路车辆 功能安全审核及评估方法 第4部分:硬件层面 |
China National Standards PA |
English PDF |
GB/T 43253.3-2023 |
Road vehicles - Functional safety audit and assessment methods PArt 3: Software level 道路车辆 功能安全审核及评估方法 第3部分:软件层面 |
China National Standards PA |
English PDF |
GB/T 43253.2-2023 |
Road vehicles - Functional safety audit and assessment methods PArt 2: Concept phase and system level 道路车辆 功能安全审核及评估方法 第2部分:概念阶段和系统层面 |
China National Standards PA |
English PDF |
GB/T 43253.1-2023 |
Road vehicles - Functional safety audit and assessment methods - PArt 1: General requirements 道路车辆 功能安全审核及评估方法 第1部分:通用要求 |
China National Standards PA |
English PDF |
GB/T 43249-2023 |
PAssive infrared detection system for automobiles 汽车用被动红外探测系统 |
China National Standards PA |
English PDF |
GB/T 31467-2023 |
Test method for electrical performance of lithium-ion power battery PAcks and systems for electric vehicles 电动汽车用锂离子动力电池包和系统电性能试验方法 |
China National Standards PA |
English PDF |
GB/T 28957.1-2023 |
Road vehicles - Test dusts for filter evaluation - PArt 1: Silica test dusts 道路车辆 用于滤清器评定的试验粉尘 第1部分:氧化硅试验粉尘 |
China National Standards PA |
English PDF |
GB/T 12428-2023 |
Calculation method of PAssenger car loading mass 客车装载质量计算方法 |
China National Standards PA |
English PDF |
GB/T 23101.4-2023 |
Surgical implants HydroxyaPAtite Part 4: Determination of coating bond strength 外科植入物 羟基磷灰石 第4部分:涂层粘结强度的测定 |
China National Standards PA |
English PDF |
GB/T 23101.3-2023 |
Surgical implants HydroxyaPAtite Part 3: Chemical analysis and characterization of crystallinity and phase purity 外科植入物 羟基磷灰石 第3部分:结晶度和相纯度的化学分析和表征 |
China National Standards PA |
English PDF |
GB/T 43277.2-2023 |
Stop clamps and flow regulators for medical infusion (blood transfusion) equipment PArt 2: Liquid contact scale flow regulators 医用输液(输血)器具用止流夹和流量调节器 第2部分:液体接触式刻度流量调节器 |
China National Standards PA |
English PDF |
GB/T 43277.1-2023 |
Stop clamps and flow regulators for medical infusion (blood transfusion) equipment PArt 1: Non-liquid contact stop clamps and flow regulators 医用输液(输血)器具用止流夹和流量调节器 第1部分:非液体接触式止流夹和流量调节器 |
China National Standards PA |
English PDF |
GB/T 29549.1-2023 |
Offshore oil fixed platform module drilling rig PArt 1: Design 海上石油固定平台模块钻机 第1部分:设计 |
China National Standards PA |
English PDF |
GB/T 10894-2023 |
SePAration mechanical noise test method 分离机械噪声测试方法 |
China National Standards PA |
English PDF |
GB/T 40853.2-2023 |
High frequency inductive components Electrical characteristics and measurement methods PArt 2: Rated current of inductors for DC-DC converters 高频感性元件 电特性及其测量方法 第2部分:DC-DC变换器用电感器额定电流 |
China National Standards PA |
English PDF |
GB/T 28869.3-2023 |
Magnetic cores made of soft magnetic materials - Measurement methods - PArt 3: Magnetic properties at high excitation levels 软磁材料制成的磁心 测量方法 第3部分:高励磁水平下的磁特性 |
China National Standards PA |
English PDF |
GB/T 28869.2-2023 |
Magnetic cores made of soft magnetic materials - Methods of measurement - PArt 2: Magnetic properties at low excitation levels 软磁材料制成的磁心 测量方法 第2部分:低励磁水平下的磁特性 |
China National Standards PA |
English PDF |
GB/T 43259.302-2023 |
Energy Management System Application Programming Interface (EMS-API) PArt 302: Dynamic Part of the Common Information Model (CIM) 能量管理系统应用程序接口(EMS-API)第302部分:公共信息模型(CIM)的动态部分 |
China National Standards PA |
English PDF |
GB/T 5008.3-2023 |
Lead-acid batteries for starters PArt 3: Product varieties, specifications and terminal dimensions for heavy-duty vehicles 起动用铅酸蓄电池 第3部分:重载车辆产品品种规格和端子尺寸 |
China National Standards PA |
English PDF |
GB/T 5008.2-2023 |
Lead-acid batteries for starting use PArt 2: Product variety specifications and terminal dimensions and markings 起动用铅酸蓄电池 第2部分:产品品种规格和端子尺寸、标记 |
China National Standards PA |
English PDF |
GB/T 5008.1-2023 |
Lead-acid batteries for starting use PArt 1: Technical conditions and test methods 起动用铅酸蓄电池 第1部分:技术条件和试验方法 |
China National Standards PA |
English PDF |
GB/T 43098.2-2023 |
Analysis methods for water treatment agents PArt 2: Determination of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS) 水处理剂分析方法 第2部分:砷、汞、镉、铬、铅、镍、铜含量的测定 电感耦合等离子体质谱法(ICP-MS) |
China National Standards PA |
English PDF |
GB/T 23947.3-2023 |
General method for determination of arsenic in inorganic chemical products PArt 3: Atomic fluorescence spectrometry 无机化工产品中砷测定的通用方法 第3部分:原子荧光光谱法 |
China National Standards PA |
English PDF |
GB/T 17530.2-2023 |
Test methods for industrial acrylic acid and esters PArt 2: Determination of organic impurities and purity of industrial acrylic acid esters Gas chromatography 工业丙烯酸及酯的试验方法 第2部分:工业用丙烯酸酯有机杂质及纯度的测定 气相色谱法 |
China National Standards PA |
English PDF |
GB/T 17529.5-2023 |
Acrylic acids and esters for industrial use PArt 5: 2-Ethylhexyl acrylate for industrial use 工业用丙烯酸及酯 第5部分:工业用丙烯酸2-乙基己酯 |
China National Standards PA |
English PDF |
GB/T 17529.4-2023 |
Acrylic acids and esters for industrial use PArt 4: n-Butyl acrylate for industrial use 工业用丙烯酸及酯 第4部分:工业用丙烯酸正丁酯 |
China National Standards PA |
English PDF |
GB/T 17529.3-2023 |
Acrylic acids and esters for industrial use PArt 3: Ethyl acrylate for industrial use 工业用丙烯酸及酯 第3部分:工业用丙烯酸乙酯 |
China National Standards PA |
English PDF |
GB/T 17529.2-2023 |
Acrylic acids and esters for industrial use PArt 2: Methyl acrylate for industrial use 工业用丙烯酸及酯 第2部分:工业用丙烯酸甲酯 |
China National Standards PA |
English PDF |
GB/T 17529.1-2023 |
Acrylic acids and esters for industrial use PArt 1: Acrylic acid for industrial use 工业用丙烯酸及酯 第1部分:工业用丙烯酸 |
China National Standards PA |
English PDF |
GB/T 43326.4-2023 |
Snow blowers - Safety requirements and test methods - PArt 4: Additional national and regional requirements 抛雪机 安全要求和试验方法 第4部分:国家和地区的附加要求 |
China National Standards PA |
English PDF |
GB/T 43326.3-2023 |
Snow throwers - Safety requirements and test methods - PArt 3: Mounted snow throwers 抛雪机 安全要求和试验方法 第3部分:坐骑式抛雪机 |
China National Standards PA |
English PDF |
GB/T 43326.2-2023 |
Snow blowers - Safety requirements and test methods - PArt 2: Step-by-step snow blowers 抛雪机 安全要求和试验方法 第2部分:步进式抛雪机 |
China National Standards PA |
English PDF |
GB/T 43326.1-2023 |
Snow blowers - Safety requirements and test methods - PArt 1: Terminology and general tests 抛雪机 安全要求和试验方法 第1部分:术语和通用试验 |
China National Standards PA |
English PDF |
GB/T 43257.6-2023 |
Safety test methods for radioactive material transport containers PArt 6: Heat resistance test 放射性物品运输容器安全试验方法 第6部分:耐热试验 |
China National Standards PA |
English PDF |
GB/T 43257.1-2023 |
Safety test methods for radioactive material transport containers PArt 1: General principles 放射性物品运输容器安全试验方法 第1部分:总则 |
China National Standards PA |
English PDF |
GB/T 4960.2-2023 |
Terminology of Nuclear Science and Technology PArt 2: Fission Reactor 核科学技术术语 第2部分:裂变反应堆 |
China National Standards PA |
English PDF |
GB/T 25774.3-2023 |
Inspection of welding materials PArt 3: Preparation and inspection of T-joint fillet weld specimens 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验 |
China National Standards PA |
English PDF |
GB/T 25774.2-2023 |
Inspection of welding materials PArt 2: Preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel 焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备 |
China National Standards PA |
English PDF |
GB/T 25774.1-2023 |
Examination of welding materials PArt 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals 焊接材料的检验 第1部分: 钢、镍及镍合金熔敷金属力学性能试样的制备 |
China National Standards PA |
English PDF |
GB/T 15558.5-2023 |
Buried polyethylene (PE) piping systems for gas use PArt 5: System suitability 燃气用埋地聚乙烯(PE)管道系统 第5部分:系统适用性 |
China National Standards PA |
English PDF |
GB/T 15558.4-2023 |
Buried polyethylene (PE) piping systems for gas use PArt 4: Valves 燃气用埋地聚乙烯(PE)管道系统 第4部分:阀门 |
China National Standards PA |
English PDF |
GB/T 15558.3-2023 |
Buried polyethylene (PE) piping systems for gas use PArt 3: Pipe fittings 燃气用埋地聚乙烯(PE)管道系统 第3部分:管件 |
China National Standards PA |
English PDF |
GB/T 15558.2-2023 |
Buried polyethylene (PE) piping systems for gas use PArt 2: Pipes 燃气用埋地聚乙烯(PE)管道系统 第2部分:管材 |
China National Standards PA |
English PDF |
GB/T 15558.1-2023 |
Buried polyethylene (PE) piping systems for gas use PArt 1: General principles 燃气用埋地聚乙烯(PE)管道系统 第1部分:总则 |
China National Standards PA |
English PDF |
GB/T 26215-2023 |
CaPAcitors for converter valve damping and absorption circuits in high-voltage direct current transmission systems 高压直流输电系统换流阀阻尼吸收回路用电容器 |
China National Standards PA |
English PDF |
GB/T 19494.3-2023 |
Mechanized sampling of coal PArt 3: Determination of precision and bias testing 煤炭机械化采样 第3部分:精密度测定和偏倚试验 |
China National Standards PA |
English PDF |
GB/T 19494.2-2023 |
Mechanized sampling of coal PArt 2: Preparation of coal samples 煤炭机械化采样 第2部分:煤样的制备 |
China National Standards PA |
English PDF |
GB/T 19494.1-2023 |
Mechanized sampling of coal PArt 1: Sampling methods 煤炭机械化采样 第1部分:采样方法 |
China National Standards PA |
English PDF |
GB/T 7186-2023 |
Coal prePAration terminology 选煤术语 |
China National Standards PA |
English PDF |
GB/T 13871.4-2023 |
Rotating shaft lip seals with elastomer sealing elements - PArt 4: Performance test procedures 密封元件为弹性体材料的旋转轴唇形密封圈 第4部分:性能试验程序 |
China National Standards PA |
English PDF |
GB/T 13871.3-2023 |
Lip seals for rotating shafts with elastomeric sealing elements - PArt 3: Storage, handling and installation 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分:贮存、搬运和安装 |
China National Standards PA |
English PDF |
GB/T 19520.22-2023 |
Mechanical structures of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions PArt 3-110: Residential racks and cabinets for smart homes 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分:智慧房屋用住宅机架和机柜 |
China National Standards PA |
English PDF |
GB/T 19520.21-2023 |
Mechanical Structure of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions PArt 3-109: Chassis Dimensions of Embedded Computing Devices 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-109部分:嵌入式计算设备的机箱尺寸 |
China National Standards PA |
English PDF |
GB/T 19520.20-2023 |
Mechanical structure of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions PArt 3-108: Dimensions of R-type sub-boxes and plug-ins 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-108部分:R型插箱和插件的尺寸 |
China National Standards PA |
English PDF |
GB/T 20914.5-2023 |
Dies Nitrogen gas springs PArt 5: Safety regulations for nitrogen springs 冲模 氮气弹簧 第5部分:氮气弹簧安全规范 |
China National Standards PA |
English PDF |
GB/T 43347-2023 |
Monitoring of environmental PArameters of electrical, instrumentation and control equipment important for nuclear power plant safety 核电厂安全重要电气、仪表与控制设备环境参数的监测 |
China National Standards PA |
English PDF |
GB/T 43441.1-2023 |
Information technology digital twin PArt 1: general requirements 信息技术 数字孪生 第1部分:通用要求 |
China National Standards PA |
English PDF |
GB/T 43437-2023 |
Information Technology Information Product R&D CaPAbility Assessment Model 信息技术 信息产品研发能力评估模型 |
China National Standards PA |
English PDF |
GB/T 40681.2-2023 |
Statistical methods for monitoring production process caPAbility and performance Part 2: Process capability and performance for time-dependent process models 生产过程能力和性能监测统计方法 第2部分:时间相依过程模型的过程能力与性能 |
China National Standards PA |
English PDF |
GB/T 43316.6-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - PArt 6: Slow strain rate method 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 |
China National Standards PA |
English PDF |
GB/T 43316.5-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - PArt 5: Constant tensile deformation method 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 |
China National Standards PA |
English PDF |
GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - PArt 4: Ball or pin pressure method 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards PA |
English PDF |
GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - PArt 3: Bending method 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards PA |
English PDF |
GB/T 43316.2-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - PArt 2: Constant tensile load method 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 |
China National Standards PA |
English PDF |
GB/T 43316.1-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - PArt 1: General principles 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 |
China National Standards PA |
English PDF |
GB/T 42918.2-2023 |
Plastics - Thermoplastic polyurethanes for molding and extrusion - PArt 2: Specimen preparation and property determination 塑料 模塑和挤出用热塑性聚氨酯 第2部分:试样制备和性能测定 |
China National Standards PA |
English PDF |
GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials PArt 2: Specimen preparation and property determination 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards PA |
English PDF |
GB/T 21461.1-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials PArt 1: Nomenclature system and basis for classification 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards PA |
English PDF |
GB/T 19042.6-2023 |
Evaluation and routine testing of medical imaging dePArtments Part 3-6: Imaging performance acceptance and stability testing of mammography X-ray equipment in breast tomosynthesis imaging mode 医用成像部门的评价及例行试验 第3-6部分:乳腺断层合成成像模式下乳腺摄影X射线设备成像性能验收与稳定性试验 |
China National Standards PA |
English PDF |
GB/T 15241.1-2023 |
Ergonomic principles related to mental load PArt 1: Mental load terminology and assessment methods 与心理负荷相关的工效学原则 第1部分:心理负荷术语与测评方法 |
China National Standards PA |
English PDF |
GB/T 5338.5-2023 |
Series 1 containers - Technical requirements and test methods - PArt 5: Platform and rack-mounted containers 系列1集装箱 技术要求和试验方法 第5部分:平台和台架式集装箱 |
China National Standards PA |
English PDF |
GB/T 5338.4-2023 |
Series 1 containers Technical requirements and test methods PArt 4: Unpressurized dry bulk containers 系列1集装箱 技术要求和试验方法 第4部分:无压干散货集装箱 |
China National Standards PA |
English PDF |
GB/T 23986.2-2023 |
PAints and varnishes - Determination of volatile organic compounds (VOC) and/or semi-volatile organic compounds (SVOC) content - Part 2: Gas chromatography 色漆和清漆 挥发性有机化合物(VOC)和/或半挥发性有机化合物(SVOC)含量的测定 第2部分:气相色谱法 |
China National Standards PA |
English PDF |
GB 31604.47-2023 |
National food safety standards Food contact materials and products Determination of fluorescent substances in PAper, cardboard and paper products 食品安全国家标准 食品接触材料及制品 纸、纸板及纸制品中荧光性物质的测定 |
China National Standards PA |
English PDF |
GB 31610.5-2023 |
National food safety standards Inspection of PAragonimus in animal aquatic products and their products 食品安全国家标准 动物性水产品及其制品中并殖吸虫的检验 |
China National Standards PA |
English PDF |
GB 31612-2023 |
National Food Safety Standards Hygienic Specifications for the Production of Strain PrePArations for Food Processing 食品安全国家标准 食品加工用菌种制剂生产卫生规范 |
China National Standards PA |
English PDF |
GB 31610.6-2023 |
National food safety standards - Inspection of SPArganoma mansoni tapeworm in animal aquatic products and their products 食品安全国家标准 动物性水产品及其制品中曼氏迭宫绦虫裂头蚴的检验 |
China National Standards PA |
English PDF |
GB 5009.210-2023 |
National food safety standards Determination of PAntothenic acid in food 食品安全国家标准 食品中泛酸的测定 |
China National Standards PA |
English PDF |
GB 31639-2023 |
National food safety standards: bacterial culture prePArations for food processing 食品安全国家标准 食品加工用菌种制剂 |
China National Standards PA |
English PDF |
GB 1886.360-2022 |
National Food Safety Standard Food Additive Tea Polyphenol PAlmitate 食品安全国家标准 食品添加剂 茶多酚棕榈酸酯 |
China National Standards PA |
English PDF |
GB 4806.8-2022 |
National Food Safety Standards Food Contact PAper and Paperboard Materials and Products 食品安全国家标准 食品接触用纸和纸板材料及制品 |
China National Standards PA |
English PDF |
GB 31607-2021 |
National food safety standards Limits of PAthogenic bacteria in bulk ready-to-eat foods 食品安全国家标准 散装即食食品中致病菌限量 |
China National Standards PA |
English PDF |
GB 29921-2021 |
National Food Safety Standards Limits of PAthogenic Bacteria in Prepackaged Foods 食品安全国家标准 预包装食品中致病菌限量 |
China National Standards PA |
English PDF |
GB 19295-2021 |
National Food Safety Standards Quick Frozen Noodles and PrePAred Foods 食品安全国家标准 速冻面米与调制食品 |
China National Standards PA |
English PDF |
GB 1903.53-2021 |
National Food Safety Standard Food Nutritional Enhancer D-Calcium PAntothenate 食品安全国家标准 食品营养强化剂 D-泛酸钙 |
China National Standards PA |
English PDF |
GB 43284-2023 |
Requirements for restricting excessive PAckaging of commodities Fresh edible agricultural products 限制商品过度包装要求 生鲜食用农产品 |
China National Standards PA |
English PDF |
GB 43203-2023 |
Coal PrePAration Plant Safety Regulations 选煤厂安全规程 |
China National Standards PA |
English PDF |
GB 43066-2023 |
Safety technical requirements for PAssive explosion-proof facilities in coal mines 煤矿用被动式隔爆设施安全技术要求 |
China National Standards PA |
English PDF |
GB 22757.2-2023 |
Light vehicle energy consumption labeling PArt 2: Externally rechargeable hybrid electric vehicles and pure electric vehicles 轻型汽车能源消耗量标识 第2部分:可外接充电式混合动力电动汽车和纯电动汽车 |
China National Standards PA |
English PDF |
GB 22757.1-2023 |
Light vehicle energy consumption labeling PArt 1: Gasoline and diesel vehicles 轻型汽车能源消耗量标识 第1部分:汽油和柴油汽车 |
China National Standards PA |
English PDF |
Find out:18320Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 |