GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 41205.1-2021 |
Code and attribute description of emergency supplies -- Part 1: Personal protective equipment 应急物资编码与属性描述 第1部分:个体防护装备 |
China National Standards Part |
English PDF |
GB/T 41205.2-2021 |
Code and attribute description of emergency supplies -- Part 2: Decontamination material and equipment 应急物资编码与属性描述 第2部分:洗消器材及设备 |
China National Standards Part |
English PDF |
GB/T 41205.3-2021 |
Code and attribute description of emergency supplies -- Part 3: Search and rescue equipment 应急物资编码与属性描述 第3部分:搜救设备 |
China National Standards Part |
English PDF |
GB/T 15166.4-2021 |
High-voltage alternating-current fuses -- Part 4:Fuse for exteanal protection of shunt capacitors 高压交流熔断器 第4部分:并联电容器外保护用熔断器 |
China National Standards Part |
English PDF |
GB/T 18916.60-2021 |
Norm of water intake -- Part 60: Silicone 取水定额 第60部分:有机硅 |
China National Standards Part |
English PDF |
GB/T 15579.14-2021 |
Arc welding equipment -- Part 14: Calibration, validation and consistency testing 弧焊设备 第14部分:校准、确认和一致性试验 |
China National Standards Part |
English PDF |
GB/T 41107.2-2021 |
Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第2部分:自拘束试验 |
China National Standards Part |
English PDF |
GB/T 41107.1-2021 |
Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第1部分:总则 |
China National Standards Part |
English PDF |
GB/T 20303.5-2021 |
Cranes—Cabins and control stations—Part 5: Overhead travelling and portal bridge cranes 起重机 司机室和控制站 第5 部分:桥式和门式起重机 |
China National Standards Part |
English PDF |
GB/T 4657-2021 |
Codes for the central Party and state organs people’s communities and the other state organizations 中央党政机关、人民团体及其他机构代码 |
China National Standards Part |
English PDF |
GB/T 8563.1-2021 |
Classification and codes for information of reward and disciplinary action -- Part 1: Codes of medal, honorary title and reward 奖励、纪律处分信息分类与代码 第1部分:勋章、荣誉称号和表彰奖励代码 |
China National Standards Part |
English PDF |
GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分:拉弯法 |
China National Standards Part |
English PDF |
GB/T 5121.28-2021 |
Methods for chemical analysis of copper and copper alloys—Part 28:Determination of chromium,iron,manganese,cobalt,nickel,zinc,arsenic,selenium,silver,cadmium,tin,antimony,tellurium,lead and bismuth content—Inductively coupled plasma-mass spectrometry 铜及铜合金化学分析方法 第28部分:铬、铁、锰、钴、镍、锌、砷、硒、银、镉、锡、锑、碲、铅和铋含量的测定 电感耦合等离子体质谱法 |
China National Standards Part |
English PDF |
GB/T 7991.1-2021 |
Test method of viterous and porcelain enamels—Part 1:Determination of resistance to alkaline liquids 搪玻璃层试验方法 第1部分:耐碱性溶液腐蚀性能的测定 |
China National Standards Part |
English PDF |
GB/T 6113.104-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards Part |
English PDF |
GB/T 6113.101-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus 无线电骚扰和抗扰度测量设备和测量方法规范 第1-1部分:无线电骚扰和抗扰度测量设备 测量设备 |
China National Standards Part |
English PDF |
GB/T 14598.118-2021 |
Measuring relays and protection equipment -- Part 118: Synchrophasor for power systems -- Measurements 量度继电器和保护装置 第118部分:电力系统同步相量 测量 |
China National Standards Part |
English PDF |
GB/T 41108.3-2021 |
Safety of machinery -- Safety requirements for interlocking devices -- Part 3: Trapped key interlocking devices and systems 机械安全 联锁装置的安全要求 第3部分:截留钥匙联锁装置及系统 |
China National Standards Part |
English PDF |
GB/T 41108.2-2021 |
Safety of machinery -- Safety requirements for interlocking devices -- Part 2: Interlocking devices with guard-locking 机械安全 联锁装置的安全要求 第2部分:带防护锁定的联锁装置 |
China National Standards Part |
English PDF |
GB/T 41108.1-2021 |
Safety of machinery -- Safety requirements for interlocking devices -- Part 1: Direct opening position switches 机械安全 联锁装置的安全要求 第1部分:直接断开位置开关 |
China National Standards Part |
English PDF |
GB/T 14598.181-2021 |
Measuring relays and protection equipment -- Part 181:Functional requirements for frequency protection 量度继电器和保护装置 第181 部分:频率保护功能要求 |
China National Standards Part |
English PDF |
GB/T 41123.3-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification 无损检测 工业射线计算机层析成像检测 第3部分:验证 |
China National Standards Part |
English PDF |
GB/T 41123.2-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation 无损检测 工业射线计算机层析成像检测 第2部分:操作和解释 |
China National Standards Part |
English PDF |
GB/T 41123.1-2021 |
Non-destructive testing -- Radiation methods for industrial computed tomography -- Part 1: Principles, equipment and samples 无损检测 工业射线计算机层析成像检测 第1部分:原理、设备和样品 |
China National Standards Part |
English PDF |
GB/T 12604.12-2021 |
Non-destructive testing -- Terminology -- Part 12: Radiation methods for industrial computed tomography 无损检测? 术语? 第12部分:工业射线计算机层析成像检测 |
China National Standards Part |
English PDF |
GB/T 41105.3-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method 无损检测? X射线管电压的测量和评价 第3部分:能谱法 |
China National Standards Part |
English PDF |
GB/T 41105.2-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method 无损检测? X射线管电压的测量和评价 第2部分:厚板滤波法稳定性核查 |
China National Standards Part |
English PDF |
GB/T 41104.3-2021 |
Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy 实心和药芯软钎料丝? 规范和试验方法? 第3部分:药芯软钎料丝功效的润湿平衡试验方法 |
China National Standards Part |
English PDF |
GB/T 41104.2-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分:钎剂含量的测定 |
China National Standards Part |
English PDF |
GB/T 41104.1-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 1: Classification and performance requirements 实心和药芯软钎料丝? 规范和试验方法? 第1部分:分类和性能要求 |
China National Standards Part |
English PDF |
GB/T 38265.15-2021 |
Test methods for soft soldering fluxes—Part 15: Copper corrosion test 软钎剂试验方法 第15部分:铜腐蚀试验 |
China National Standards Part |
English PDF |
GB/T 38265.14-2021 |
Test methods for soft soldering fluxes—Part 14: Assessment of tackiness of flux residues 软钎剂试验方法 第14部分:钎剂残留物胶粘性的评价 |
China National Standards Part |
English PDF |
GB/T 38265.13-2021 |
Test methods for soft soldering fluxes—Part 13: Determination of flux spattering 软钎剂试验方法 第13部分:钎剂溅散性的测定 |
China National Standards Part |
English PDF |
GB/T 38265.11-2021 |
Test methods for soft soldering fluxes—Part 11: Solubility of flux residues 软钎剂试验方法 第11部分:钎剂残留物的可溶性 |
China National Standards Part |
English PDF |
GB/T 38265.5-2021 |
Test methods for soft soldering fluxes -- Part 5: Copper mirror test 软钎剂试验方法 第5部分:铜镜试验 |
China National Standards Part |
English PDF |
GB/T 41158-2021 |
Management requirements for circulation information of automobile aftermarket Parts 汽车后市场配件流通信息管理要求 |
China National Standards Part |
English PDF |
GB/T 22437.5-2021 |
Cranes—Design principles for loads and load combinations—Part 5:Overhead travelling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分:桥式和门式起重机 |
China National Standards Part |
English PDF |
GB/T 41105.1-2021 |
Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method 无损检测 X射线管电压的测量和评价 第1部分:分压法 |
China National Standards Part |
English PDF |
GB/T 20346.1-2021 |
Equipment for distributing fertilizer—Part 1: Full width fertilizer distributors 施肥机械 第1部分:全幅宽撒肥机 |
China National Standards Part |
English PDF |
GB/T 8593.2-2021 |
Earth-moving machinery—Symbols for operator controls and other displays—Part 2:Symbols for specific machines,equipment and accessories 土方机械 司机操纵装置和其他显示装置用符号 第2部分:机器、工作装置和附件的特殊符号 |
China National Standards Part |
English PDF |
GB/T 8593.1-2021 |
Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols 土方机械? 司机操纵装置和其他显示装置用符号? 第1部分:通用符号 |
China National Standards Part |
English PDF |
GB/T 2449.1-2021 |
Sulphur for industrial use—Part 1: Solid product 工业硫磺 第1部分:固体产品 |
China National Standards Part |
English PDF |
GB/T 17889.2-2021 |
Ladders—Part 2: Requirements, test, marking 梯子 第2部分:要求、试验和标志 |
China National Standards Part |
English PDF |
GB/T 17889.1-2021 |
Ladders -- Part 1: Terms, types, functional sizes 梯子 第1部分:术语、型式和功能尺寸 |
China National Standards Part |
English PDF |
GB/T 10395.5-2021 |
Agricultural machinery -- Safety -- Part 5: Power-driven soil-working machines 农业机械 安全 第5部分:驱动式耕作机械 |
China National Standards Part |
English PDF |
GB/T 24818.2-2021 |
Cranes—Access, guards and restraints—Part 2: Mobile cranes 起重机 通道及安全防护设施 第2部分:流动式起重机 |
China National Standards Part |
English PDF |
GB/T 20303.2-2021 |
Cranes—Cabins and control stations—Part 2:Mobile cranes 起重机 司机室和控制站 第2部分:流动式起重机 |
China National Standards Part |
English PDF |
GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分:减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards Part |
English PDF |
GB/T 8100.2-2021 |
Mounting surfaces of hydraulic valves—Part 2:Compensated flow-control valves 液压阀安装面 第2部分:调速阀 |
China National Standards Part |
English PDF |
GB/T 304.9-2021 |
Spherical plain bearings—Part 9:General technical regulations 关节轴承 第9部分:通用技术规则 |
China National Standards Part |
English PDF |
GB/T 38055.5-2021 |
Rough-terrain trucks—User requirements—Part 5: Interface between variable-reach truck and intergrated personnel work platform 越野叉车 对用户的要求 第5部分:伸缩臂式叉车和集成式人员工作平台的连接装置 |
China National Standards Part |
English PDF |
GB/T 38055.4-2021 |
Rough-terrain trucks—User requirements—Part 4: Additional requirements for variable-reach trucks handling freely suspended loads 越野叉车 对用户的要求 第4部分:悬吊可自由摆动载荷伸缩臂式叉车的附加要求 |
China National Standards Part |
English PDF |
GB/T 26949.12-2021 |
Industrial trucks—Verification of stability—Part 12:Industrial variable-reach trucks handling freight containers of 6 m length and longer 工业车辆 稳定性验证 第12部分:搬运6 m及其以上长度货运集装箱的伸缩臂式叉车 |
China National Standards Part |
English PDF |
GB/T 21723-2021 |
Wheat(rice)-straw Particleboard 麦( 稻 )秸秆刨花板 |
China National Standards Part |
English PDF |
GB/T 41135.2-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 2: System aspects 故障路径指示用电流和电压传感器或探测器?? 第2部分:系统应用 |
China National Standards Part |
English PDF |
GB/T 41135.1-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 1: General principles and requirements 故障路径指示用电流和电压传感器或探测器?? 第1部分:通用原理和要求 |
China National Standards Part |
English PDF |
GB/T 41106.6-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 6: Sort of virtual experience rides 大型游乐设施 检查、维护保养与修理 第6部分:虚拟体验类 |
China National Standards Part |
English PDF |
GB/T 41106.5-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 5: Sort of aquatic rides 大型游乐设施 检查、维护保养与修理 第5部分:水上类 |
China National Standards Part |
English PDF |
GB/T 41106.4-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 4: Sort of lifting rides 大型游乐设施 检查、维护保养与修理 第4部分:升降类 |
China National Standards Part |
English PDF |
GB/T 41106.3-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 3: Sort of rotary rides 大型游乐设施 检查、维护保养与修理 第3部分:旋转类 |
China National Standards Part |
English PDF |
GB/T 41106.2-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 2: Sort of track rides 大型游乐设施 检查、维护保养与修理 第2部分:轨道类 |
China National Standards Part |
English PDF |
GB/T 41106.1-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 1: General 大型游乐设施 检查、维护保养与修理 第1部分:总则 |
China National Standards Part |
English PDF |
GB/T 18916.11-2021 |
Norm of water intake—Part 11: Coal preparation 取水定额 第11部分:选煤 |
China National Standards Part |
English PDF |
GB/T 22473.1-2021 |
Batteries used for energy storage -- Part 1: Photovoltaic off-grid application technical conditions 储能用蓄电池? 第1部分:光伏离网应用技术条件 |
China National Standards Part |
English PDF |
GB/T 41101.3-2021 |
Earth-moving machinery -- Sustainability -- Part 3: Used machines 土方机械? 可持续性? 第3部分:二手机器 |
China National Standards Part |
English PDF |
GB/T 41101.2-2021 |
Earth-moving machinery -- Sustainability -- Part 2: Remanufacturing 土方机械? 可持续性? 第2部分:再制造 |
China National Standards Part |
English PDF |
GB/T 25684.13-2021 |
Earth-moving machinery—Safety—Part 13: Requirements for rollers 土方机械 安全 第13部分:压路机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.12-2021 |
Earth-moving machinery—Safety—Part 12: Requirements for cable excavators 土方机械 安全 第12部分:机械挖掘机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.11-2021 |
Earth-moving machinery—Safety—Part 11: Requirements for landfill compactors 土方机械 安全 第11部分:回填压实机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.10-2021 |
Earth-moving machinery—Safety—Part 10: Requirements for trenchers 土方机械 安全 第10部分:挖沟机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.9-2021 |
Earth-moving machinery—Safety—Part 9: Requirements for pipelayers 土方机械 安全 第9部分:吊管机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.8-2021 |
Earth-moving machinery—Safety—Part 8: Requirements for graders 土方机械 安全 第8部分:平地机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.7-2021 |
Earth-moving machinery—Safety—Part 7: Requirements for scrapers 土方机械 安全 第7部分:铲运机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.6-2021 |
Earth-moving machinery—Safety—Part 6: Requirements for dumpers 土方机械 安全 第6部分:自卸车的要求 |
China National Standards Part |
English PDF |
GB/T 25684.5-2021 |
Earth-moving machinery—Safety—Part 5: Requirements for hydraulic excavators 土方机械 安全 第5部分:液压挖掘机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.4-2021 |
Earth-moving machinery—Safety—Part 4: Requirements for backhoe loaders 土方机械 安全 第4部分:挖掘装载机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.3-2021 |
Earth-moving machinery—Safety—Part 3: Requirements for loaders 土方机械 安全 第3部分:装载机的要求 |
China National Standards Part |
English PDF |
GB/T 25684.2-2021 |
Earth-moving machinery—Safety—Part 2: Requirements for dozers 土方机械 安全 第2部分:推土机的要求 |
China National Standards Part |
English PDF |
GB/T 7991.3-2021 |
Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分:耐温差急变性能的测定 |
China National Standards Part |
English PDF |
GB/T 10827.2-2021 |
Industrial trucks -- Safety requirements and verification -- Part 2: Self-propelled variable-reach trucks 工业车辆? 安全要求和验证? 第2部分:自行式伸缩臂式叉车 |
China National Standards Part |
English PDF |
GB/T 24675.6-2021 |
Conservation tillage equipment -- Part 6: Smashed straw machine 保护性耕作机械? 第6部分: 秸秆粉碎还田机 |
China National Standards Part |
English PDF |
GB/T 24675.5-2021 |
Conservation tillage equipment -- Part 5: Smashed root stubble machine 保护性耕作机械? 第5部分: 根茬粉碎还田机 |
China National Standards Part |
English PDF |
GB/T 24675.4-2021 |
Conservation tillage equipment—Part 4:Disc harrow 保护性耕作机械 第4部分: 圆盘耙 |
China National Standards Part |
English PDF |
GB/T 41040-2021 |
COTS semiconductor Parts for space application -- Quality assurance requirements 宇航用商业现货(COTS)半导体器件 质量保证要求 |
China National Standards Part |
English PDF |
GB/T 1927.20-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength 无疵小试样木材物理力学性质试验方法 第20部分:抗劈力测定 |
China National Standards Part |
English PDF |
GB/T 1927.19-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分:硬度测定 |
China National Standards Part |
English PDF |
GB/T 1927.18-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation 无疵小试样木材物理力学性质试验方法 第18部分:抗冲击压痕测定 |
China National Standards Part |
English PDF |
GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength 无疵小试样木材物理力学性质试验方法 第17部分:冲击韧性测定 |
China National Standards Part |
English PDF |
GB/T 18916.10-2021 |
Norm of water intake—Part 10:Chemical pharmaceutical products 取水定额 第10部分:化学制药产品 |
China National Standards Part |
English PDF |
GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定 |
China National Standards Part |
English PDF |
GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分:抗弯弹性模量测定 |
China National Standards Part |
English PDF |
GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength 无疵小试样木材物理力学性质试验方法 第9部分:抗弯强度测定 |
China National Standards Part |
English PDF |
GB/T 1927.8-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling 无疵小试样木材物理力学性质试验方法 第8部分:湿胀性测定 |
China National Standards Part |
English PDF |
GB/T 41079.1-2021 |
Test methods for physical properties of liquid metals—Part 1:Determination of density 液态金属物理性能测定方法 第1部分:密度的测定 |
China National Standards Part |
English PDF |
GB/T 1927.7-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption 无疵小试样木材物理力学性质试验方法 第7部分:吸水性测定 |
China National Standards Part |
English PDF |
GB/T 1927.6-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分:干缩性测定 |
China National Standards Part |
English PDF |
GB/T 1927.5-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density 无疵小试样木材物理力学性质试验方法 第5部分:密度测定 |
China National Standards Part |
English PDF |
GB/T 1927.4-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分:含水率测定 |
China National Standards Part |
English PDF |
GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定 |
China National Standards Part |
English PDF |
GB/T 1927.2-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements 无疵小试样木材物理力学性质试验方法 第2部分:取样方法和一般要求 |
China National Standards Part |
English PDF |
Find out:14234Items | To Page of: First -Previous-Next -Last | [15] [16] [17] [18] [19] [20] [21] |