GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 9239.31-2023 |
Mechanical vibration - Rotor balancing - Part 31: Machine unbalance variability and unbalance sensitivity 机械振动 转子平衡 第31部分: 机器不平衡易变性和不平衡灵敏度 |
China National Standards Part |
English PDF |
GB/T 7025.1-2023 |
Elevator main parameters and types and dimensions of car, hoistway and machine room Part 1: Elevators of categories I, II, III and VI 电梯主参数及轿厢、井道、机房的型式与尺寸 第1部分:Ⅰ、Ⅱ、Ⅲ、Ⅵ类电梯 |
China National Standards Part |
English PDF |
GB/T 7233.2-2023 |
Steel castings - Ultrasonic testing - Part 2: High pressure steel castings 铸钢件 超声检测 第2部分:高承压铸钢件 |
China National Standards Part |
English PDF |
GB/T 35210.1-2023 |
Determination of isothermal adsorption/desorption capacity of shale methane - Part 1: Static volumetric method 页岩甲烷等温吸附/解吸量的测定 第1部分:静态容积法 |
China National Standards Part |
English PDF |
GB/T 42784.1-2023 |
Rough terrain forklifts - Test methods for verification of visibility - Part 1: Telehandlers 越野叉车 验证视野的试验方法 第1部分:伸缩臂式叉车 |
China National Standards Part |
English PDF |
GB/T 4798.4-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity levels Part 4: Stationary use in places without weather protection 环境条件分类 环境参数组分类及其严酷程度分级 第4部分:无气候防护场所固定使用 |
China National Standards Part |
English PDF |
GB/T 4798.3-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity classification Part 3: Stationary use in places with weather protection 环境条件分类 环境参数组分类及其严酷程度分级 第3部分:有气候防护场所固定使用 |
China National Standards Part |
English PDF |
GB/T 19749.4-2023 |
Coupling capacitors and capacitive voltage dividers - Part 4: DC or AC single-phase capacitive voltage dividers 耦合电容器及电容分压器 第4部分:直流或交流单相电容分压器 |
China National Standards Part |
English PDF |
GB/T 42596.3-2023 |
Safety of machine tools - Presses - Part 3: Safety requirements for hydraulic presses 机床安全 压力机 第3部分:液压机安全要求 |
China National Standards Part |
English PDF |
GB/T 42596.1-2023 |
Safety of machine tools - Presses - Part 1: General safety requirements 机床安全 压力机 第1部分:通用安全要求 |
China National Standards Part |
English PDF |
GB/T 9089.2-2023 |
Electrical installations under severe outdoor conditions - Part 2: General protection requirements 户外严酷条件下的电气设施 第2部分:一般防护要求 |
China National Standards Part |
English PDF |
GB/T 26237.14-2023 |
Information technology - Biometric data exchange format - Part 14: DNA data 信息技术 生物特征识别数据交换格式 第14部分:DNA数据 |
China National Standards Part |
English PDF |
GB/T 4678.14-2023 |
Die-casting mold Parts - Part 14: Stop pins 压铸模 零件 第14部分:限位钉 |
China National Standards Part |
English PDF |
GB/T 4678.16-2023 |
Die-casting mold Parts - Part 16: Flat push rods 压铸模 零件 第16部分:扁推杆 |
China National Standards Part |
English PDF |
GB/T 15000.3-2023 |
Working guidelines for standard samples - Part 3: Standard samples - Determination and evaluation of homogeneity and stability 标准样品工作导则 第3部分:标准样品 定值和均匀性与稳定性评估 |
China National Standards Part |
English PDF |
GB/T 38662.2-2023 |
Internet of Things Marking System Ecode Marking Application Guide Part 2: Wire, Cable and Optical Fiber Cable 物联网标识体系 Ecode标识应用指南 第2部分:电线电缆和光纤光缆 |
China National Standards Part |
English PDF |
GB/T 18916.7-2023 |
Quotas for water withdrawals - Part 7: Alcohol 取水定额 第7部分:酒精 |
China National Standards Part |
English PDF |
GB/T 18916.6-2023 |
Quotas for water withdrawals - Part 6: Beer 取水定额 第6部分:啤酒 |
China National Standards Part |
English PDF |
GB/T 42691.8-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 8: Electrical physical layer (EPL) specification: Local area interconnect network (DC-LIN) on DC power lines 道路车辆 局域互联网络(LIN) 第8部分:电气物理层(EPL)规范:直流电源线上的局域互联网络(DC-LIN) |
China National Standards Part |
English PDF |
GB/T 42691.7-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 7: Electrical physical layer (EPL) conformance test specification 道路车辆 局域互联网络(LIN) 第7部分:电气物理层(EPL)一致性测试规范 |
China National Standards Part |
English PDF |
GB/T 42691.6-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 6: Protocol conformance test specification 道路车辆 局域互联网络(LIN) 第6部分:协议一致性测试规范 |
China National Standards Part |
English PDF |
GB/T 42691.5-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 5: Application programming interface 道路车辆 局域互联网络(LIN) 第5部分:应用程序接口 |
China National Standards Part |
English PDF |
GB/T 42691.4-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 4: 12V/24V electrical physical layer specification 道路车辆 局域互联网络(LIN) 第4部分:12V/24V电气物理层规范 |
China National Standards Part |
English PDF |
GB/T 42691.3-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 3: Protocol specification 道路车辆 局域互联网络(LIN) 第3部分:协议规范 |
China National Standards Part |
English PDF |
GB/T 42691.2-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 2: Transport layer protocols and network layer services 道路车辆 局域互联网络(LIN) 第2部分:传输层协议和网络层服务 |
China National Standards Part |
English PDF |
GB/T 42691.1-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 1: General information and use case definitions 道路车辆 局域互联网络(LIN) 第1部分:一般信息和使用案例定义 |
China National Standards Part |
English PDF |
GB/T 42534.1-2023 |
Fluid power transmission systems and components - Reference dictionary specification - Part 1: Organizational overview 流体传动系统及元件 参考词典规范 第1部分:组织结构概述 |
China National Standards Part |
English PDF |
GB/T 42558.1-2023 |
Anti-seismic technology for electrical equipment of converter stations used on plateaus Part 1: Guidelines for anti-seismic tests and evaluations 高原用换流站电气设备抗震技术 第1部分:抗震试验及评价导则 |
China National Standards Part |
English PDF |
GB/T 19314.10-2023 |
Small boats - Hull structure and member dimensions - Part 10: Sail loads and sail accessories for sailing yachts 小艇 艇体结构和构件尺寸 第10部分:帆艇帆装载荷及帆装附件 |
China National Standards Part |
English PDF |
GB/T 14034.4-2023 |
Hydraulic power connections - Metallic pipe fittings - Part 4: 60° cone 液压传动连接 金属管接头 第4部分:60°锥形 |
China National Standards Part |
English PDF |
GB/T 14034.2-2023 |
Hydraulic power connections - Metallic pipe fittings - Part 2: 37° flared 液压传动连接 金属管接头 第2部分:37°扩口式 |
China National Standards Part |
English PDF |
GB/T 10827.6-2023 |
Industrial vehicles - Safety requirements and verification - Part 6: Goods and personnel carriers 工业车辆 安全要求和验证 第6部分:货物及人员载运车 |
China National Standards Part |
English PDF |
GB/T 10827.4-2023 |
Industrial vehicles - Safety requirements and verification - Part 4: Unmanned industrial vehicles and their systems 工业车辆 安全要求和验证 第4部分:无人驾驶工业车辆及其系统 |
China National Standards Part |
English PDF |
GB/T 15092.3-2023 |
Appliance switches - Part 2-5: Particular requirements for change-over selectors 器具开关 第2-5部分:转换选择器的特殊要求 |
China National Standards Part |
English PDF |
GB/T 35205.6-2023 |
Rough terrain forklifts - Safety requirements and verification - Part 6: Inclined cab 越野叉车 安全要求及验证 第6部分:倾斜式司机室 |
China National Standards Part |
English PDF |
GB/T 304.3-2023 |
Spherical bearings - Part 3: Fits 关节轴承 第3部分:配合 |
China National Standards Part |
English PDF |
GB/T 21559.2-2023 |
Rolling bearings - Rolling bearings for linear motion - Part 2: Static load ratings 滚动轴承 直线运动滚动支承 第2部分:额定静载荷 |
China National Standards Part |
English PDF |
GB/T 21559.1-2023 |
Rolling bearings - Rolling bearings for linear motion - Part 1: Dynamic load ratings and rating life 滚动轴承 直线运动滚动支承 第1部分:额定动载荷和额定寿命 |
China National Standards Part |
English PDF |
GB/T 273.1-2023 |
Rolling bearings - Overall scheme of dimensions - Part 1: Tapered roller bearings 滚动轴承 外形尺寸总方案 第1部分:圆锥滚子轴承 |
China National Standards Part |
English PDF |
GB/T 35205.2-2023 |
Rough terrain forklifts - Safety requirements and verification - Part 2: Swivel forklifts 越野叉车 安全要求及验证 第2部分:回转式叉车 |
China National Standards Part |
English PDF |
GB/T 42513.1-2023 |
Methods for chemical analysis of nickel alloys - Part 1: Determination of chromium content - Ferrous ammonium sulfate potentiometric titration method 镍合金化学分析方法 第1部分:铬含量的测定 硫酸亚铁铵电位滴定法 |
China National Standards Part |
English PDF |
GB/T 8152.11-2023 |
Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content - Atomic fluorescence spectrometry and solid injection direct method 铅精矿化学分析方法 第11部分:汞含量的测定 原子荧光光谱法和固体进样直接法 |
China National Standards Part |
English PDF |
GB/T 11064.2-2023 |
Lithium carbonate, lithium hydroxide monohydrate, lithium chloride chemical analysis methods - Part 2: Determination of lithium hydroxide content - acid-base titration 碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第2部分:氢氧化锂含量的测定 酸碱滴定法 |
China National Standards Part |
English PDF |
GB/T 31887.5-2023 |
Bicycles - Lighting and retro-reflective devices - Part 5: Non-generator powered lighting systems for bicycles 自行车 照明和回复反射装置 第5部分:自行车非发电机供电的照明系统 |
China National Standards Part |
English PDF |
GB/T 31887.4-2023 |
Bicycles - Lighting and retro-reflective devices - Part 4: Lighting systems powered by bicycle generators 自行车 照明和回复反射装置 第4部分:自行车发电机供电的照明系统 |
China National Standards Part |
English PDF |
GB/T 13277.1-2023 |
Compressed air - Part 1: Pollutant purification levels 压缩空气 第1部分:污染物净化等级 |
China National Standards Part |
English PDF |
GB/T 1972.2-2023 |
Disc springs - Part 2: Specifications 碟形弹簧 第2部分:技术条件 |
China National Standards Part |
English PDF |
GB/T 1972.1-2023 |
Disc Springs Part 1: Calculations 碟形弹簧 第1部分:计算 |
China National Standards Part |
English PDF |
GB/T 10067.417-2023 |
Basic specifications for electrothermal and electromagnetic treatment devices Part 417: Devices for growing silicon carbide single crystals 电热和电磁处理装置基本技术条件 第417部分:碳化硅单晶生长装置 |
China National Standards Part |
English PDF |
GB/T 42552.1-2023 |
Acoustics - Laboratory method for measuring impact sound improvement of cladding with small slab modules - Part 1: Heavy dense slabs 声学 小楼板模块测量覆面层撞击声改善量的实验室方法 第1部分:重质密实楼板 |
China National Standards Part |
English PDF |
GB/T 18916.16-2023 |
Quotas for water withdrawal - Part 16: Electrolytic aluminum 取水定额 第16部分:电解铝 |
China National Standards Part |
English PDF |
GB/T 18916.12-2023 |
Water withdrawal quotas - Part 12: Alumina 取水定额 第12部分:氧化铝 |
China National Standards Part |
English PDF |
GB/T 27698.4-2023 |
Performance test methods for heat exchangers and heat transfer elements - Part 4: Noise determination of air coolers 热交换器及传热元件性能测试方法 第4部分:空冷器噪声测定 |
China National Standards Part |
English PDF |
GB/T 27698.1-2023 |
Performance Test Methods for Heat Exchangers and Heat Transfer Elements Part 1: General Requirements 热交换器及传热元件性能测试方法 第1部分:通用要求 |
China National Standards Part |
English PDF |
GB/T 41815.3-2023 |
Information technology - Biometric presence attack detection - Part 3: Testing and reporting 信息技术 生物特征识别呈现攻击检测 第3部分:测试与报告 |
China National Standards Part |
English PDF |
GB/T 37036.9-2023 |
Information technology - Biometric identification of mobile devices - Part 9: Test methods 信息技术 移动设备生物特征识别 第9部分:测试方法 |
China National Standards Part |
English PDF |
GB/T 12223-2023 |
Connections for Part-turn valve actuators 部分回转阀门驱动装置的连接 |
China National Standards Part |
English PDF |
GB/T 18453.4-2023 |
Cranes - Maintenance manual - Part 4: Jib cranes 起重机 维护手册 第4部分:臂架起重机 |
China National Standards Part |
English PDF |
GB/Z 42625-2023 |
Vacuum technology Vacuum gauges Quadrupole mass spectrometer characteristics for Partial pressure measurement 真空技术 真空计 用于分压力测量的四极质谱仪特性 |
China National Standards Part |
English PDF |
GB/T 17909.4-2023 |
Cranes - Operating manual - Part 4: Jib cranes 起重机 操作手册 第4部分:臂架起重机 |
China National Standards Part |
English PDF |
GB/T 15663.2-2023 |
Coal mine technical terminology Part 2: Shaft and roadway engineering 煤矿科技术语 第2部分:井巷工程 |
China National Standards Part |
English PDF |
GB/T 42756.4-2023 |
Card and identification security devices - Contactless proximity objects - Part 4: Transmission protocols 卡及身份识别安全设备 无触点接近式对象 第4部分:传输协议 |
China National Standards Part |
English PDF |
GB/T 42756.3-2023 |
Card and identification security devices - Contactless proximity objects - Part 3: Initialization and anti-collision 卡及身份识别安全设备 无触点接近式对象 第3部分:初始化和防冲突 |
China National Standards Part |
English PDF |
GB/T 42756.2-2023 |
Card and identification security devices - Contactless proximity objects - Part 2: Radio frequency power and signal interfaces 卡及身份识别安全设备 无触点接近式对象 第2部分:射频功率和信号接口 |
China National Standards Part |
English PDF |
GB/T 42756.1-2023 |
Card and identification security devices - Contactless proximity objects - Part 1: Physical characteristics 卡及身份识别安全设备 无触点接近式对象 第1部分:物理特性 |
China National Standards Part |
English PDF |
GB/T 26237.5-2023 |
Information technology - Biometric data exchange format - Part 5: Facial image data 信息技术 生物特征识别数据交换格式 第5部分:人脸图像数据 |
China National Standards Part |
English PDF |
GB/T 7702.7-2023 |
Test methods for coal-based granular activated carbon-Part 7: Determination of iodine adsorption value 煤质颗粒活性炭试验方法 第7部分:碘吸附值的测定 |
China National Standards Part |
English PDF |
GB/T 26416.9-2023 |
Methods for chemical analysis of rare earth iron alloys - Part 9: Determination of phosphorus content - Bismuth phosphomolybdenum blue spectrophotometric method 稀土铁合金化学分析方法 第9部分:磷量的测定 铋磷钼蓝分光光度法 |
China National Standards Part |
English PDF |
GB/T 26416.8-2023 |
Methods for chemical analysis of rare earth iron alloys - Part 8: Determination of silicon content - Photometric method 稀土铁合金化学分析方法 第8部分:硅量的测定 光度法 |
China National Standards Part |
English PDF |
GB/T 26416.7-2023 |
Chemical analysis methods of rare earth iron alloys - Part 7: Determination of carbon and sulfur content - High frequency-infrared absorption method 稀土铁合金化学分析方法 第7部分:碳、硫量的测定 高频-红外吸收法 |
China National Standards Part |
English PDF |
GB/T 42567.3-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for temperature transmitters 工业过程测量变送器试验的参比条件和程序 第3部分:温度变送器的特定程序 |
China National Standards Part |
English PDF |
GB/T 42567.2-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for pressure transmitters 工业过程测量变送器试验的参比条件和程序 第2部分:压力变送器的特定程序 |
China National Standards Part |
English PDF |
GB/T 42567.1-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 1: General procedures for all types of transmitters 工业过程测量变送器试验的参比条件和程序 第1部分:所有类型变送器的通用程序 |
China National Standards Part |
English PDF |
GB/T 26237.11-2023 |
Information technology - Biometric data exchange format - Part 11: Processed signature/signature dynamic data 信息技术 生物特征识别数据交换格式 第11部分:处理过的签名/签字动态数据 |
China National Standards Part |
English PDF |
GB/T 26237.13-2023 |
Information technology - Biometric data exchange format - Part 13: Voice data 信息技术 生物特征识别数据交换格式 第13部分:声音数据 |
China National Standards Part |
English PDF |
GB/T 28826.3-2023 |
Information technology—Common biometric interchange format framework—Part 3: Maintainer format specification 信息技术 公用生物特征识别交换格式框架 第3部分:维护者格式规范 |
China National Standards Part |
English PDF |
GB/T 6150.18-2023 |
Methods for chemical analysis of tungsten concentrates - Part 18: Determination of barium content - Inductively coupled plasma atomic emission spectrometry 钨精矿化学分析方法 第18部分:钡含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards Part |
English PDF |
GB/T 8151.25-2023 |
Methods for chemical analysis of zinc concentrates - Part 25: Determination of indium content - Flame atomic absorption spectrometry 锌精矿化学分析方法 第25部分:铟含量的测定 火焰原子吸收光谱法 |
China National Standards Part |
English PDF |
GB/T 21228.2-2023 |
Acoustics - Surface sound scattering properties - Part 2: Free-field directional diffusion coefficient measurement 声学 表面声散射特性 第2部分:自由场方向性扩散系数测量 |
China National Standards Part |
English PDF |
GB/T 17001.7-2023 |
Security inks - Part 7: Optically variable security inks 防伪油墨 第7部分:光学可变防伪油墨 |
China National Standards Part |
English PDF |
GB/T 19721.6-2023 |
Marine Forecast and Warning Issues Part 6: Current Forecast Issues 海洋预报和警报发布 第6部分:海流预报发布 |
China National Standards Part |
English PDF |
GB/T 9816.1-2023 |
Thermal links - Part 1: Requirements and application guidelines 热熔断体 第1部分:要求和应用导则 |
China National Standards Part |
English PDF |
GB/T 8152.17-2023 |
Methods for chemical analysis of lead concentrates - Part 17: Determination of aluminum, magnesium, iron, copper, zinc, cadmium, arsenic, antimony, bismuth, calcium content - Inductively coupled plasma atomic emission spectrometry 铅精矿化学分析方法 第17部分:铝、镁、铁、铜、锌、镉、砷、锑、铋、钙含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards Part |
English PDF |
GB/T 42517.2-2023 |
Intelligent transportation system - Electronic road map data model and representation for intelligent driving - Part 2: Open road 智能运输系统 智能驾驶电子道路图数据模型与表达 第2部分:开放道路 |
China National Standards Part |
English PDF |
GB/T 42603.2-2023 |
Moderate temperature molding materials for investment casting - Part 2: Test methods for serviceability 熔模铸造中温模料 第2部分:使用性能试验方法 |
China National Standards Part |
English PDF |
GB/T 42538.2-2023 |
Agricultural and forestry tractors - Safety - Part 2: Narrow track and small tractors 农林拖拉机 安全 第2部分:窄轮距和小型拖拉机 |
China National Standards Part |
English PDF |
GB/T 42538.1-2023 |
Agricultural and forestry tractors - Safety - Part 1: Basic tractors 农林拖拉机 安全 第1部分:基本型拖拉机 |
China National Standards Part |
English PDF |
GB/T 42603.1-2023 |
Moderate temperature molding materials for investment casting - Part 1: Test methods for physical properties 熔模铸造中温模料 第1部分:物理性能试验方法 |
China National Standards Part |
English PDF |
GB/T 15116-2023 |
Die-casting copper alloy and copper alloy die-casting Parts 压铸铜合金及铜合金压铸件 |
China National Standards Part |
English PDF |
GB/T 8190.4-2023 |
Reciprocating internal combustion engines - Emissions measurement - Part 4: Steady-state and transient test cycles for engines of different uses 往复式内燃机 排放测量 第4部分:不同用途发动机的稳态和瞬态试验循环 |
China National Standards Part |
English PDF |
GB/T 8190.1-2023 |
Reciprocating internal combustion engines - Emission measurements - Part 1: Test bench measurement systems for gaseous and particulate emissions 往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量系统 |
China National Standards Part |
English PDF |
GB/T 42474.6-2023 |
Safety Monitoring System for Vehicle Transportation of Explosive Hazardous Chemicals Part 6: Data Interface between Communication Center and Monitoring Client 爆炸危险化学品汽车运输安全监控系统 第6部分:通信中心与监控客户端间数据接口 |
China National Standards Part |
English PDF |
GB/T 42474.5-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals - Part 5: Data interface between on-board device and communication center 爆炸危险化学品汽车运输安全监控系统 第5部分:车载装置与通信中心间数据接口 |
China National Standards Part |
English PDF |
GB/T 42474.4-2023 |
Safety Monitoring System for Vehicle Transportation of Explosive Hazardous Chemicals Part 4: Monitoring Client 爆炸危险化学品汽车运输安全监控系统 第4部分:监控客户端 |
China National Standards Part |
English PDF |
GB/T 42474.3-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals Part 3: Installation of vehicle-mounted devices 爆炸危险化学品汽车运输安全监控系统 第3部分:车载装置安装 |
China National Standards Part |
English PDF |
GB/T 42474.2-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals Part 2: Vehicle-mounted devices 爆炸危险化学品汽车运输安全监控系统 第2部分:车载装置 |
China National Standards Part |
English PDF |
GB/T 42474.1-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals Part 1: General technical requirements 爆炸危险化学品汽车运输安全监控系统 第1部分:通用技术要求 |
China National Standards Part |
English PDF |
GB/T 4937.23-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life 半导体器件 机械和气候试验方法 第23部分:高温工作寿命 |
China National Standards Part |
English PDF |
GB/T 4937.27-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) susceptibility test - Machine model (MM) 半导体器件 机械和气候试验方法 第27部分:静电放电(ESD)敏感度测试 机器模型(MM) |
China National Standards Part |
English PDF |
GB/T 4937.32-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 32: Flammability of plastic encapsulated devices (externally induced) 半导体器件 机械和气候试验方法 第32部分:塑封器件的易燃性(外部引起的) |
China National Standards Part |
English PDF |
Find out:14234Items | To Page of: First -Previous-Next -Last | [1] [2] [3] [4] [5] [6] [7] |