GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 24635.3-2009 |
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - TechniQue for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第3部分:应用已校准工件或标准件 |
China National Standards Q |
English PDF |
GB/T 24634-2009 |
Geometrical product specifications (GPS) - General concepts and reQuirements for GPS measuring equipment 产品几何技术规范(GPS) GPS 测量设备通用概念和要求 |
China National Standards Q |
English PDF |
GB 14391-2009 |
Technical reQuirements for satellite emergency position-indicating radio beacons 卫星紧急无线电示位标性能要求 |
China National Standards Q |
English PDF |
GB/T 24603-2009 |
Boosting pressure water supply eQuipment for rectangular tank 箱式叠压给水设备 |
China National Standards Q |
English PDF |
GB/T 24602-2009 |
Disposal of sludge from municipal wastewater treatment plant - Quality of sludge used in separate incineration 城镇污水处理厂污泥处置 单独焚烧用泥质 |
China National Standards Q |
English PDF |
GB/T 24600-2009 |
Disposal of sludge from municipal wastewater treatment plant - Quality of sludge used in land improvement 城镇污水处理厂污泥处置 土地改良用泥质 |
China National Standards Q |
English PDF |
GB/T 7120-2009 |
Three-point Quick-attaching coupler of implement to agricultural wheeled tractors - Category 3N、4N 农业轮式拖拉机和机具三点悬挂挂接器 3N类、4N类 |
China National Standards Q |
English PDF |
GB/T 2779-2009 |
Tractor’s connective eQuipment for trailers - Types dimensions and mounting requirement 拖拉机拖挂装置 型式尺寸和安装要求 |
China National Standards Q |
English PDF |
GB/T 24659.4-2009 |
Agricultural crawler tractors - Metal track - ReQuirement 农业履带拖拉机 金属履带板 技术条件 |
China National Standards Q |
English PDF |
GB/T 24659.3-2009 |
Agricultural crawler tractors - Support roller - ReQuirement 农业履带拖拉机 支重轮 技术条件 |
China National Standards Q |
English PDF |
GB/T 24659.2-2009 |
Agricultural crawler tractors - Track idler - ReQuirement 农业履带拖拉机 驱动轮 技术条件 |
China National Standards Q |
English PDF |
GB/T 24659.1-2009 |
Agricultural crawler tractors - Track idler - ReQuirement 农业履带拖拉机 导向轮 技术条件 |
China National Standards Q |
English PDF |
GB/T 24644-2009 |
Testing method and performance reQuirement of falling object protective - Structures on agricultural and forestry tractors 农林拖拉机落物防护装置 试验方法和性能要求 |
China National Standards Q |
English PDF |
GB/T 24641-2009 |
Tractors eQuipped with implements - General requirement 带作业机具的拖拉机机组 通用技术条件 |
China National Standards Q |
English PDF |
GB/T 24628-2009 |
Sterilization of health care products - Biological and chemical indicators - Test eQuipment 医疗保健产品灭菌 生物与化学指示物 测试设备 |
China National Standards Q |
English PDF |
GB/T 24612.2-2009 |
ReQuirements for electrical safety in the workplace - Part 2: Safety measure of operation on power off 电气设备应用场所的安全要求 第2部分:在断电状态下操作的安全措施 |
China National Standards Q |
English PDF |
GB/T 24612.1-2009 |
ReQuirements for electrical safety in the workplace - Part 1: General rules 电气设备应用场所的安全要求 第1部分:总则 |
China National Standards Q |
English PDF |
GB/T 15370.2-2009 |
General reQuirement of agricultural tractors - Part 2: 50 kW~130 kW wheeled tractors 农业拖拉机 通用技术条件 第2部分:50kW~130kW轮式拖拉机 |
China National Standards Q |
English PDF |
GB/T 14710-2009 |
The environmental reQuirement and test methods for medical electrical equipment 医用电器环境要求及试验方法 |
China National Standards Q |
English PDF |
GB/T 24626-2009 |
Explosion resistant eQuipment 耐爆炸设备 |
China National Standards Q |
English PDF |
GB/T 13540-2009 |
Seismic Qualification for high-voltage switchgear and controlgear 高压开关设备和控制设备的抗震要求 |
China National Standards Q |
English PDF |
GB/T 24664-2009 |
Evaluation and measurement method for beam Quality of high power laser system for industry manufacturing 工业用大功率激光器光束质量测试评定方法 |
China National Standards Q |
English PDF |
GB/T 22264.6-2009 |
Mounted digital display electric measuring instruments - Part 6: Special reQuirements for insulation resistance meters 安装式数字显示电测量仪表 第6部分:绝缘电阻表的特殊要求 |
China National Standards Q |
English PDF |
GB/T 17215.352-2009 |
Electricity metering eQuipment (AC) - Particular requirements - Part 52: Symbols 交流电测量设备 特殊要求 第52部分:符号 |
China National Standards Q |
English PDF |
GB/T 24615-2009 |
The techniQue specification for producing and manufacturing of brick tea 紧压茶生产加工技术规范 |
China National Standards Q |
English PDF |
GB/T 24614-2009 |
ReQuirements for material of brick tea 紧压茶原料要求 |
China National Standards Q |
English PDF |
GB/T 24538-2009 |
Personal fall protection eQuipment - Energy absorbers 坠落防护 缓冲器 |
China National Standards Q |
English PDF |
GB/T 24537-2009 |
Personal fall protection eQuipment - Guided type fall arrester including a flexible anchor line 坠落防护 带柔性导轨的自锁器 |
China National Standards Q |
English PDF |
GB 24544-2009 |
Personal fall protection eQuipment - Retractable type fall arrester 坠落防护 速差自控器 |
China National Standards Q |
English PDF |
GB 24543-2009 |
Personal fall protection eQuipment - Lanyards 坠落防护 安全绳 |
China National Standards Q |
English PDF |
GB 24542-2009 |
Personal fall protection eQuipment - Guided type fall arrester including a rigid anchor line 坠落防护 带刚性导轨的自锁器 |
China National Standards Q |
English PDF |
GB 24540-2009 |
Protective clothing - Protective clothing against liQuid acids and alkalis 防护服装 酸碱类化学品防护服 |
China National Standards Q |
English PDF |
GB 24539-2009 |
Protective clothing - Performance reQuirements of chemical protective clothing 防护服装 化学防护服通用技术要求 |
China National Standards Q |
English PDF |
GB/T 5909-2009 |
Performance reQuirements and test methods of commercial vehicles wheels 商用车辆车轮性能要求和试验方法 |
China National Standards Q |
English PDF |
GB/T 24553-2009 |
Motorcycles and mopeds-limitative device to steering and maximum wheel steer angle-reQuirements and measurement methods 摩托车和轻便摩托车转向轮限位装置及最大转向角的技术要求和测定方法 |
China National Standards Q |
English PDF |
GB/T 24552-2009 |
Electric vehicles - Windshield demisters and defrosters system - Performance reQuirements and test methods 电动汽车风窗玻璃除霜除雾系统的性能要求及试验方法 |
China National Standards Q |
English PDF |
GB/T 24549-2009 |
Fuel cell electric vehicles - Safety reQuirements 燃料电池电动汽车 安全要求 |
China National Standards Q |
English PDF |
GB/T 24545-2009 |
ReQuirement of speed limitation system for motor vehicles 车辆车速限制系统技术要求 |
China National Standards Q |
English PDF |
GB/T 6624-2009 |
Standard method for measuring the surface Quality of polished silicon slices by visual inspection 硅抛光片表面质量目测检验方法 |
China National Standards Q |
English PDF |
GB/T 1554-2009 |
Testing method for crystallographic perfection of silicon by preferential etch techniQues 硅晶体完整性化学择优腐蚀检验方法 |
China National Standards Q |
English PDF |
GB/T 13388-2009 |
Method for measuring crystallographic orientation of flats on single-crystal silicon slices and wafers by X-ray techniQues 硅片参考面结晶学取向X射线测试方法 |
China National Standards Q |
English PDF |
GB 24511-2009 |
Stainless steel plate, sheet and strip for pressure eQuipments 承压设备用不锈钢钢板及钢带 |
China National Standards Q |
English PDF |
GB/T 24595-2009 |
Steel bar for Quenched and tempered automotive crankshaft 调质汽车曲轴用钢棒 |
China National Standards Q |
English PDF |
GB/T 24594-2009 |
Quality alloy mould steels 优质合金模具钢 |
China National Standards Q |
English PDF |
GB/T 24566-2009 |
Monitoring and testing for energy saving of power convertor eQuipments 整流设备节能监测 |
China National Standards Q |
English PDF |
GB/T 24560-2009 |
Monitoring and testing for energy saving of electrolyzation and electroplating eQuipments 电解、电镀设备节能监测 |
China National Standards Q |
English PDF |
GB/T 24489-2009 |
General principles of stipulation for energy efficiency reQuirements of energy consuming products 用能产品能效指标编制通则 |
China National Standards Q |
English PDF |
GB/T 24584-2009 |
Metallic materials - Tensile testing - Method of test in liQuid helium 金属材料 拉伸试验 液氦试验方法 |
China National Standards Q |
English PDF |
GB/T 20935.3-2009 |
Method of electromagnetic acoustic inspection for metal materials - Part 3: Standard test method for ultrasonic surface examinations using electromagnetic acoustic transducer(EMAT)techniQues 金属材料电磁超声检验方法 第3部分:利用电磁超声换能器技术进行超声表面检测的方法 |
China National Standards Q |
English PDF |
GB/T 20935.2-2009 |
Method of electromagnetic acoustic inspection for metal materials - Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer(EMAT)techniQues 金属材料电磁超声检验方法 第2部分:利用电磁超声换能器技术进行超声检测的方法 |
China National Standards Q |
English PDF |
GB/T 16762-2009 |
Wire rope slings for general purposes-characteristics and technical reQuirements 一般用途钢丝绳吊索特性和技术条件 |
China National Standards Q |
English PDF |
GB/T 24598-2009 |
Qualification test of welders - Fusion welding for aluminium and aluminium alloys 铝及铝合金熔化焊焊工技能评定 |
China National Standards Q |
English PDF |
GB/T 24572.4-2009 |
Standard practice for separation and concentration of ignitable liQuid residues from fire debris samples - Part 4: Solid phase microextraction(SPME) 火灾现场易燃液体残留物实验室提取方法 第4部分:固相微萃取法 |
China National Standards Q |
English PDF |
GB/T 24572.3-2009 |
Standard practice for separation and concentration of ignitable liQuid residues from fire debris samples - Part 3: Activated charcoal absorption 火灾现场易燃液体残留物实验室提取方法 第3部分:活性炭吸附法 |
China National Standards Q |
English PDF |
GB/T 24572.2-2009 |
Standard practice for separation and concentration of ignitable liQuid residues from fire debris samples - Part 2: Direct headspace vapors sampling 火灾现场易燃液体残留物实验室提取方法 第2部分:直接顶空进样法 |
China National Standards Q |
English PDF |
GB/T 24572.1-2009 |
Standard practice for separation and concentration of ignitable liQuid residues from fire debris samples - Part 1: Solvent extraction 火灾现场易燃液体残留物实验室提取方法 第1部分:溶剂提取法 |
China National Standards Q |
English PDF |
GB/T 24507-2009 |
Decorative sheets based on thermosetting resins laminated parQuet 浸渍纸层压板饰面多层实木复合地板 |
China National Standards Q |
English PDF |
GB/T 24505-2009 |
Technical specification of drilling for high pressure aQuifer water detection in underground mine 矿井井下高压含水层探水钻探技术规范 |
China National Standards Q |
English PDF |
GB/T 12467.5-2009 |
Quality requirements for fusion welding of metallic materials - Part 5: Standard documents need to conform to claim conformity to the quality requirements 金属材料熔焊质量要求 第5部分:满足质量要求应依据的标准文件 |
China National Standards Q |
English PDF |
GB/T 12467.4-2009 |
Quality reqirements for fusion welding of metallic materials - Part 4: Elementary quality requirements 金属材料熔焊质量要求 第4部分:基本质量要求 |
China National Standards Q |
English PDF |
GB/T 12467.3-2009 |
Quality reqirements for fusion welding of metallic materials - Part 3: Standard quality requirements 金属材料熔焊质量要求 第3部分:一般质量要求 |
China National Standards Q |
English PDF |
GB/T 12467.2-2009 |
Quality reqirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements 金属材料熔焊质量要求 第2部分:完整质量要求 |
China National Standards Q |
English PDF |
GB/T 12467.1-2009 |
Quality reqirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements 金属材料熔焊质量要求 第1部分:质量要求相应等级的选择准则 |
China National Standards Q |
English PDF |
GB/T 24555-2009 |
ReQuierments for heliox saturation diving operation to 200m 200m氦氧饱和潜水作业要求 |
China National Standards Q |
English PDF |
GB/T 11412.1-2009 |
Technical reQuirement for safety departure of sea going ship - Part 1: General requirement 海船安全开航技术要求 第1部分:一般要求 |
China National Standards Q |
English PDF |
GB/T 15036.1-2009 |
Solid wood flooring - Part 1: Technical reQuirements 实木地板 第1部分:技术要求 |
China National Standards Q |
English PDF |
GB 24462-2009 |
General safety reQuirements for civilian used primary battery 民用原电池安全通用要求 |
China National Standards Q |
English PDF |
GB 24461-2009 |
Technical reQuirements for luminaries used in cleanroom 洁净室用灯具技术要求 |
China National Standards Q |
English PDF |
GB 19510.9-2009 |
Lamp controlgear - Part 9: Particular reQuirements for ballasts for fluorescent lamps 灯的控制装置 第9部分:荧光灯用镇流器的特殊要求 |
China National Standards Q |
English PDF |
GB 19510.8-2009 |
Lamp controlgear - Part 8: Particular reQuirements for d.c. supplied electronic ballasts for emergency lighting 灯的控制装置 第8部分:应急照明用直流电子镇流器的特殊要求 |
China National Standards Q |
English PDF |
GB 19510.4-2009 |
Lamp controlgear - Part 4: Particular reQuirements for a.c.supplied electronic ballasts for fluorescent lamps 灯的控制装置 第4部分:荧光灯用交流电子镇流器的特殊要求 |
China National Standards Q |
English PDF |
GB 19510.3-2009 |
Lamp controlgear - Part 3: Particular reQuirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps 灯的控制装置 第3部分:钨丝灯用直流/交流电子降压转换器的特殊要求 |
China National Standards Q |
English PDF |
GB 19510.2-2009 |
Lamp controlgear - Part 2: Particular reQuirements for starting devices (other than glow starters) 灯的控制装置 第2部分:启动装置 (辉光启动器除外)的特殊要求 |
China National Standards Q |
English PDF |
GB 19510.14-2009 |
Lamp controlgear - Part 14: Particular reQuirements for d.c. or a.c. supplied electronic controlgear for LED modules 灯的控制装置 第14部分:LED模块用直流或交流电子控制装置的特殊要求 |
China National Standards Q |
English PDF |
GB 19510.1-2009 |
Lamp controlgear - Part 1: General and safety reQuirements 灯的控制装置 第1部分:一般要求和安全要求 |
China National Standards Q |
English PDF |
GB 19510.10-2009 |
Lamp controlgear - Part 10: Particular reQuirements for ballasts for discharge lamps(excluding fluorescent lamps) 灯的控制装置 第10部分:放电灯(荧光灯除外)用镇流器的特殊要求 |
China National Standards Q |
English PDF |
GB/T 802.5-2009 |
Prevailing torQue type hexagon acorn nuts with non-metallic insert - Welding type 非金属嵌件六角锁紧盖形螺母 焊接型 |
China National Standards Q |
English PDF |
GB/T 24474-2009 |
Lifts(elevators)-measurement of lift ride Quality 电梯乘运质量测量 |
China National Standards Q |
English PDF |
GB/T 24473-2009 |
General technical reQuirements of digital-controlled pocket spring machine 数控卷簧装袋机 技术条件 |
China National Standards Q |
English PDF |
GB/T 24472-2009 |
General technical reQuirements of digital-controlled pocket spring assembling machine 数控袋装弹簧胶粘机 技术条件 |
China National Standards Q |
English PDF |
GB/T 24471-2009 |
General technical reQuirements of spring assembling machine 串簧机 技术条件 |
China National Standards Q |
English PDF |
GB/T 24470-2009 |
General technical reQuirements of digital-controlled mid-concave spring coiling machine 中凹形弹簧数控卷簧机 技术条件 |
China National Standards Q |
English PDF |
GB/T 24457-2009 |
Metal halide lamps (Rare-earth series) - Performance reQuirements 金属卤化物灯(稀土系列) 性能要求 |
China National Standards Q |
English PDF |
GB/T 24425.3-2009 |
Prevailing torQue type wire thread inserts 锁紧型钢丝螺套 |
China National Standards Q |
English PDF |
GB/T 15144-2009 |
A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance reQuirements 管形荧光灯用交流电子镇流器 性能要求 |
China National Standards Q |
English PDF |
GB/T 14410.9-2009 |
Flight dynamics - Concepts, Quantities and symbols - Part 9: Models of atmospheric motions 飞行力学 概念、量和符号 第9部分:大气扰动模型 |
China National Standards Q |
English PDF |
GB/T 14410.8-2009 |
Flight dynamics - Concepts, Quantities and symbols - Part 8: the dynamic behavior of the aircraft 飞行力学 概念、量和符号 第8部分:飞机动态特性 |
China National Standards Q |
English PDF |
GB/T 10094-2009 |
The confidence limits of Quantile and coefficient of variation for normal distribution 正态分布分位数与变异系数的置信限 |
China National Standards Q |
English PDF |
GB/T 24468-2009 |
Specification for definition and measurement of semiconductor eQuipment reliability, availability, and maintainability(RAM) 半导体设备可靠性、可用性和维修性(RAM)的定义和测量规范 |
China National Standards Q |
English PDF |
GB/T 24466-2009 |
Health informatics - ReQuirements for an electronic health record architecture 健康信息学 电子健康记录体系架构需求 |
China National Standards Q |
English PDF |
GB/T 24463.3-2009 |
Interactive electronic technical manuals - Part 3: Common source database reQuirement 交互式电子技术手册 第3部分:公共源数据库要求 |
China National Standards Q |
English PDF |
GB/T 24463.2-2009 |
Interactive electronic technical manuals - Part 2: User interface and function reQuirement 交互式电子技术手册 第2部分:用户界面与功能要求 |
China National Standards Q |
English PDF |
GB 11555-2009 |
Motor vehicles-windshield demisting and defrosting systems - Performance reQuirements and test methods 汽车风窗玻璃除霜和除雾系统的性能和试验方法 |
China National Standards Q |
English PDF |
GB 11550-2009 |
Strength reQuirement and test of automobile seats head restraints 汽车座椅头枕强度要求和试验方法 |
China National Standards Q |
English PDF |
GB 12350-2009 |
Safety reQuirements of small-power motors 小功率电动机的安全要求 |
China National Standards Q |
English PDF |
GB 24429-2009 |
Sports helmets - Safety reQuirements and testing methods for sports helmets for cyclists and users of skateboards and roller skates 运动头盔 自行车、滑板、轮滑运动头盔的安全要求和试验方法 |
China National Standards Q |
English PDF |
GB 24391-2009 |
Low pressure die casting machine - Safety reQuirements 低压铸造机 安全要求 |
China National Standards Q |
English PDF |
GB 24390-2009 |
Shot(air)blast eQuipment - Safety requirements 抛(喷)丸设备 安全要求 |
China National Standards Q |
English PDF |
GB 24387-2009 |
Safety reQuirement for agriculture and forestry tractor fuel tank 农业和林业拖拉机燃油箱 安全要求 |
China National Standards Q |
English PDF |
GB 19261-2009 |
General and safety reQuirements of neon lamps 霓虹灯管的一般要求和安全要求 |
China National Standards Q |
English PDF |
Find out:10770Items | To Page of: First -Previous-Next -Last | [67] [68] [69] [70] [71] [72] [73] |