GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 25132-2010 |
Hydraulic fluid power - Filters - Test method for diffeREntial pressure devices 液压过滤器 压差装置试验方法 |
China National Standards RE |
English PDF |
GB/T 25129-2010 |
Unit coolers for REfrigeration 制冷用空气冷却器 |
China National Standards RE |
English PDF |
GB/T 25128-2010 |
DiREct evaporation all fresh air handling units 直接蒸发式全新风空气处理机组 |
China National Standards RE |
English PDF |
GB/T 25127.2-2010 |
Low ambient temperatuRE air source heat pump ( water chilling ) packages - Part2: Heat pump ( water chilling ) packages for household and similar application 低环境温度空气源热泵(冷水)机组 第2部分:户用及类似用途的热泵(冷水)机组 |
China National Standards RE |
English PDF |
GB/T 25127.1-2010 |
Low ambient temperatuRE air source heat pump(water chilling)packages - Part 1:Heat pump (water chilling) packages for industrial & commercial and similar application 低环境温度空气源热泵(冷水)机组 第1部分:工业或商业用及类似用途的热泵(冷水)机组 |
China National Standards RE |
English PDF |
GB/T 25126-2010 |
Large capacity cross-electromagnetic four-way REversing valve 大容量交叉式电磁四通换向阀 |
China National Standards RE |
English PDF |
GB/T 25054-2010 |
Technical diREctives for the designation of special marine protected area 海洋特别保护区选划论证技术导则 |
China National Standards RE |
English PDF |
GB/T 23561.15-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 15: Method for determining the swelling stREss of rock 煤和岩石物理力学性质测定方法 第15部分:岩石膨胀应力测定方法 |
China National Standards RE |
English PDF |
GB/T 23561.13-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 13: Methods for determining point load stREngth index of coal and rock 煤和岩石物理力学性质测定方法 第13部分:煤和岩石点载荷强度指数测定方法 |
China National Standards RE |
English PDF |
GB/T 23561.11-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 11: Methods for determining shear stREngth of coal and rock 煤和岩石物理力学性质测定方法 第11部分:煤和岩石抗剪强度测定方法 |
China National Standards RE |
English PDF |
GB/T 23561.10-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 10: Methods for determining tensile stREngth of coal and rock 煤和岩石物理力学性质测定方法 第10部分:煤和岩石抗拉强度测定方法 |
China National Standards RE |
English PDF |
GB/T 18443.8-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 8: Volume measuREment 真空绝热深冷设备性能试验方法 第8部分:容积测量 |
China National Standards RE |
English PDF |
GB/T 18443.7-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 7: Holding time measuREment 真空绝热深冷设备性能试验方法 第7部分:维持时间测量 |
China National Standards RE |
English PDF |
GB/T 18443.6-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 6: Heat-leak rate measuREment 真空绝热深冷设备性能试验方法 第6部分:漏热量测量 |
China National Standards RE |
English PDF |
GB/T 18443.5-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 5: Static evaporation rate measuREment 真空绝热深冷设备性能试验方法 第5部分:静态蒸发率测量 |
China National Standards RE |
English PDF |
GB/T 18443.4-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 4: Leak-outgassing rate measuREment 真空绝热深冷设备性能试验方法 第4部分:漏放气速率测量 |
China National Standards RE |
English PDF |
GB/T 18443.3-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 3: Leak rate measuREment 真空绝热深冷设备性能试验方法 第3部分:漏率测量 |
China National Standards RE |
English PDF |
GB/T 18443.2-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 2:Vacuum degREe measurement 真空绝热深冷设备性能试验方法 第2部分:真空度测量 |
China National Standards RE |
English PDF |
GB/T 18443.1-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 1: Basic REquirements 真空绝热深冷设备性能试验方法 第1部分:基本要求 |
China National Standards RE |
English PDF |
GB/T 18024.7-2010 |
Graphical symbols for the technical documentation of coal mine machinery - Part 7:Graphical symbols for compREssor, fan and pump 煤矿机械技术文件用图形符号 第7部分:压气机、通风机和泵图形符号 |
China National Standards RE |
English PDF |
GB/T 16552-2010 |
Gems - NomenclatuRE 珠宝玉石 名称 |
China National Standards RE |
English PDF |
GB/T 13930-2010 |
Methods for the measuREment of volume flow of gas of water-ring vacuum pumps and compressors 水环真空泵和水环压缩机 气量测定方法 |
China National Standards RE |
English PDF |
GB/T 13929-2010 |
Methods of testing for water-ring vacuum pumps and compREssors 水环真空泵和水环压缩机 试验方法 |
China National Standards RE |
English PDF |
GB/T 25241.3-2010 |
Rules for tobacco intensive seedling production - Part 3: Seedling with sand cultuRE 烟草集约化育苗技术规程 第3部分:砂培育苗 |
China National Standards RE |
English PDF |
GB/T 25172-2010 |
Technical specification for production and pREservation of fresh boar semen 猪常温精液生产与保存技术规范 |
China National Standards RE |
English PDF |
GB 19083-2010E |
Technical REquirements for protective face mask for medical use 医用防护口罩技术要求(英文版) |
China National Standards RE |
English PDF |
GB 25081-2010 |
High-voltage pREsence indicating systems 高压带电显示装置(VPIS) |
China National Standards RE |
English PDF |
GB 20840.1-2010 |
Instrument transformers - Part 1: General REquirements 互感器 第1部分:通用技术要求 |
China National Standards RE |
English PDF |
GB 19083-2010 |
Technical REquirements for protective face mask for medical use 医用防护口罩技术要求 |
China National Standards RE |
English PDF |
GB 17467-2010 |
High-voltage/Low-voltage pREfabricated substations 高压/低压预装式变电站 |
China National Standards RE |
English PDF |
GB 11032-2010 |
Metal-oxide surge arREsters without gaps for a.c. systems 交流无间隙金属氧化物避雷器 |
China National Standards RE |
English PDF |
GB 25116-2010 |
Safety REquirements for industrial laundry machinery - Dry-cleaning machines using perchloroethylene 工业洗涤机械的安全要求 四氯乙烯干洗机 |
China National Standards RE |
English PDF |
GB 25115.6-2010 |
Safety REquirements for industrial laundry machinery - Part 6: Ironing and fusing presses 工业洗涤机械的安全要求 第6部分:整烫机和粘合机 |
China National Standards RE |
English PDF |
GB 25115.5-2010 |
Safety REquirements for industrial laundry machinery - Part 5: Flatwork ironers,feeders and folders 工业洗涤机械的安全要求 第5部分:熨平机、送料机和折叠机 |
China National Standards RE |
English PDF |
GB 25115.4-2010 |
Safety REquirements for industrial laundry machinery - Part 4: Air dryers 工业洗涤机械的安全要求 第4部分:烘干机 |
China National Standards RE |
English PDF |
GB 25115.3-2010 |
Safety REquirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines 工业洗涤机械的安全要求 第3部分:隧道式洗涤机组和相关机械 |
China National Standards RE |
English PDF |
GB 25115.2-2010 |
Safety REquirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors 工业洗涤机械的安全要求 第2部分:洗衣机和洗脱机 |
China National Standards RE |
English PDF |
GB 25115.1-2010 |
Safety REquirements for industrial laundry machinery - Part 1: Commom requirements 工业洗涤机械的安全要求 第1部分:通用要求 |
China National Standards RE |
English PDF |
GB 25036-2010 |
ChildREn’s canvas rubber footwear(shoes) 布面童胶鞋 |
China National Standards RE |
English PDF |
GB 25034-2010 |
Gas-fiREd heating and hot water combi-boilers 燃气采暖热水炉 |
China National Standards RE |
English PDF |
GB/T 20887.5-2010 |
Continuously hot rolled high stREngth steel sheet and strip for automobile - Part 5: Martensitic steel 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards RE |
English PDF |
GB/T 20887.4-2010 |
Continuously hot rolled high stREngth steel sheet and strip for automobile - Part 4: Transformation induced plasticity steel 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards RE |
English PDF |
GB/T 20887.3-2010 |
Continuously hot rolled high stREngth steel sheet and strip for automobile - Part 3: Dual phase steel 汽车用高强度热连轧钢板及钢带 第3部分:双相钢 |
China National Standards RE |
English PDF |
GB/T 20887.2-2010 |
Continuously hot rolled high stREngth steel sheet and strip for automobile - Part 2: High hole expansion steel 汽车用高强度热连轧钢板及钢带 第2部分:高扩孔钢 |
China National Standards RE |
English PDF |
GB/T 20564.7-2010 |
Continuously cold rolled high stREngth steel sheet and strip for automobile - Part 7: Martensitic steels 汽车用高强度冷连轧钢板及钢带 第7部分:马氏体钢 |
China National Standards RE |
English PDF |
GB/T 20564.6-2010 |
Continuously cold rolled high stREngth steel sheet and strip for automobile - Part 6: Transformation induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第6部分:相变诱导塑性钢 |
China National Standards RE |
English PDF |
GB/T 20564.5-2010 |
Continuously cold rolled high stREngth steel sheet and strip for automobile - Part 5: Isotropic steel 汽车用高强度冷连轧钢板及钢带 第5部分:各向同性钢 |
China National Standards RE |
English PDF |
GB/T 20564.4-2010 |
Continuously cold rolled high stREngth steel sheet and strip for automobile - Part 4: High strength low alloy steel 汽车用高强度冷连轧钢板及钢带 第4部分:低合金高强度钢 |
China National Standards RE |
English PDF |
GB/T 14984.2-2010 |
Ferroalloys - Vocabulary - Part 2: Sampling and sample pREparation 铁合金 术语 第2部分:取样和制样 |
China National Standards RE |
English PDF |
GB/T 3402.2-2010 |
Plastics - Homopolymer and copolymer REsins of vinyl chloride - Part 2: Preparation of test samples and determination of properties 塑料 氯乙烯均聚和共聚树脂 第2部分:试样制备及性能测定 |
China National Standards RE |
English PDF |
GB/T 25044-2010 |
General REquest of the preparation equipment used in compressive strength test of wall bricks 砌墙砖抗压强度试样制备设备通用要求 |
China National Standards RE |
English PDF |
GB/T 25043-2010 |
Multiaxial warp-knitted REinforcement for resin-matrix prepreg 连续树脂基预浸料用多轴向经编增强材料 |
China National Standards RE |
English PDF |
GB/T 25041-2010 |
Glass fibRE filter 玻璃纤维过滤材料 |
China National Standards RE |
English PDF |
GB/T 25040-2010 |
Glass fibRE stitched fabrics 玻璃纤维缝编织物 |
China National Standards RE |
English PDF |
GB/T 25039-2010 |
Determination and calculation of heat balance for fibREglass unit melter 玻璃纤维单元窑热平衡测定与计算方法 |
China National Standards RE |
English PDF |
GB/T 25033-2010 |
REcycling asphalt concrete 再生沥青混凝土 |
China National Standards RE |
English PDF |
GB/T 25032-2010 |
Municipal solid waste incineration bottom ash aggREgate 生活垃圾焚烧炉渣集料 |
China National Standards RE |
English PDF |
GB/T 25031-2010 |
Disposal of sludge from municipal wastewater tREatment plant - Quality of sludge used in making brick 城镇污水处理厂污泥处置 制砖用泥质 |
China National Standards RE |
English PDF |
GB/T 25030-2010 |
REquest for cleaning and maintenance of buildings external wall 建筑物清洗维护质量要求 |
China National Standards RE |
English PDF |
GB/T 17431.1-2010 |
Lightweight aggREgates and its test methods - Part 1:Lightweight aggregates 轻集料及其试验方法 第1部分:轻集料 |
China National Standards RE |
English PDF |
GB/T 12010.8-2010 |
Plastic - polyvinyl alcohol(PVAL)materials - Part 8: Determination for transpaREncy 塑料 聚乙烯醇材料(PVAL) 第8部分:透明度测定 |
China National Standards RE |
English PDF |
GB/T 12010.5-2010 |
Plastic - polyvinyl alcohol (PVAL) materials - Part 5: Determination for average polymerization degREe 塑料 聚乙烯醇材料(PVAL) 第5部分:平均聚合度测定 |
China National Standards RE |
English PDF |
GB 25113-2010 |
General technical REquirement for mobile fire command center 移动消防指挥中心通用技术要求 |
China National Standards RE |
English PDF |
GB 17945-2010 |
FiRE emergency lighting and evacuate indicating system 消防应急照明和疏散指示系统 |
China National Standards RE |
English PDF |
GB 16281-2010 |
FiRE alarm receiving and dispatching system 火警受理系统 |
China National Standards RE |
English PDF |
GB/T 2828.10-2010 |
Sampling proceduREs for inspection by attributes - Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes 计数抽样检验程序 第10部分:GB/T 2828计数抽样检验系列标准导则 |
China National Standards RE |
English PDF |
GB/T 25102.4-2010 |
Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - Magnetic field stREngth 电声学 助听器 第4部分:助听器用感应回路系统磁场强度 |
China National Standards RE |
English PDF |
GB/T 25102.100-2010 |
Electroacoustics - Hearing aids - Part 0:MeasuREment of electroacoustical characteristics 电声学 助听器 第0部分:电声特性的测量 |
China National Standards RE |
English PDF |
GB/T 25079-2010 |
Acoustics - Application of new measuREment methods in building and room acoustics - MLS and SS methods 声学 建筑声学和室内声学中新测量方法的应用 MLS和SS方法 |
China National Standards RE |
English PDF |
GB/T 25078.2-2010 |
Acoustics - REcommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low noise design 声学 低噪声机器和设备设计实施建议 第2部分:低噪声设计的物理基础 |
China National Standards RE |
English PDF |
GB/T 25078.1-2010 |
Acoustics - REcommended practice for the design of low-noise machinery and equipment - Part 1: Planning 声学 低噪声机器和设备设计实施建议 第1部分:规划 |
China National Standards RE |
English PDF |
GB/T 25077-2010 |
Acoustics - Materials for acoustical applications - Determination of airflow REsistance 声学 多孔吸声材料流阻测量 |
China National Standards RE |
English PDF |
GB/T 22555-2010 |
Acceptance sampling plans and proceduREs for the inspection of bulk materials 散料验收抽样检验程序和抽样方案 |
China National Standards RE |
English PDF |
GB/T 22554-2010 |
Linear calibration using REference materials 基于标准样品的线性校准 |
China National Standards RE |
English PDF |
GB/T 19889.14-2010 |
Acoustics - MeasuREment of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field 声学 建筑和建筑构件隔声测量 第14部分:特殊现场测量导则 |
China National Standards RE |
English PDF |
GB/T 4787-2010 |
Grading capacitors for high-voltage alternating curREnt circuit-breakers 高压交流断路器用均压电容器 |
China National Standards RE |
English PDF |
GB/T 25123.2-2010 |
Electric tracion - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating curREnt motors 电力牵引 轨道机车车辆和公路车辆用旋转电机 第2部分:电子变流器供电的交流电动机 |
China National Standards RE |
English PDF |
GB/T 25123.1-2010 |
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating curREnt motors 电力牵引 轨道机车车辆和公路车辆用旋转电机 第1部分:除电子变流器供电的交流电动机之外的电机 |
China National Standards RE |
English PDF |
GB/T 25118-2010 |
Railway application - Electric equipment for rolling stock - Rules for power REsistors of open construction 轨道交通 机车车辆电气设备 开启式功率电阻器规则 |
China National Standards RE |
English PDF |
GB/T 25117.3-2010 |
Railway applications - Rolling stock - Combined testing - Part 3: Combined testing of alternating curREnt motors,fed by an indirect converter,and their control system 轨道交通 机车车辆 组合试验 第3部分:间接变流器供电的交流电动机及其控制系统的组合试验 |
China National Standards RE |
English PDF |
GB/T 25117.2-2010 |
Railway applications - Rolling stock - Combined testing - Part 2: Combined testing of chopper-fed diREct current traction motors and their control system 轨道交通 机车车辆 组合试验 第2部分:斩波器供电的直流牵引电动机及其控制系统的组合试验 |
China National Standards RE |
English PDF |
GB/T 25117.1-2010 |
Railway applications - Rolling stock - Combined testing - Part 1: Combined testing of inverter-fed alternating curREnt motors and their control system 轨道交通 机车车辆 组合试验 第1部分:逆变器供电的交流电动机及其控制系统的组合试验 |
China National Standards RE |
English PDF |
GB/T 25098-2010 |
Live washing REgulation of insulating live-working washing agent 绝缘体带电清洗剂使用导则 |
China National Standards RE |
English PDF |
GB/T 25096-2010 |
Composite station post insulators for substations with AC voltages gREater than 1000V - Definitions,test methods and acceptance riteria 交流电压高于1000V变电站用电站支柱复合绝缘子 定义、试验方法及接收准则 |
China National Standards RE |
English PDF |
GB/T 25094-2010 |
General technical specification of corREctive maintenance tower for overhead transmission line 架空输电线路抢修杆塔通用技术条件 |
China National Standards RE |
English PDF |
GB/T 25092-2010 |
Dry-type air-coRE smoothing reactors for HVDC applications 高压直流输电用干式空心平波电抗器 |
China National Standards RE |
English PDF |
GB/T 25091-2010 |
High-voltage diREct-current disconnectors and earthing switches 高压直流隔离开关和接地开关 |
China National Standards RE |
English PDF |
GB/T 25087-2010 |
Road vehicles - Round, scREened and unscreened 60V and 600V multi-core sheathed cables 道路车辆 圆形、屏蔽和非屏蔽的60V和600V多芯护套电缆 |
China National Standards RE |
English PDF |
GB/T 25085-2010 |
Road vehicles - 60 V and 600 V single-coRE cables 道路车辆 60V和600V单芯电线 |
China National Standards RE |
English PDF |
GB/T 25084-2010 |
Insulator strings and sets for overhead lines with a nominal voltage gREater than 1000V - AC power arc tests 标称电压高于1000V的架空线路用绝缘子串和绝缘子串组 交流工频电弧试验 |
China National Standards RE |
English PDF |
GB/T 25083-2010 |
Metal-oxide surge arREsters without gaps for ±800kV UHVDC systems ±800kV直流系统用金属氧化物避雷器 |
China National Standards RE |
English PDF |
GB/T 25082-2010 |
Specification and technical REquirements of oil-immersed convertor transformers for 800kV DC applications 800kV直流输电用油浸式换流变压器技术参数和要求 |
China National Standards RE |
English PDF |
GB/T 25070-2010 |
Information security technology - Technical REquirements of security design for information system classified protection 信息安全技术 信息系统等级保护安全设计技术要求 |
China National Standards RE |
English PDF |
GB/T 25068.4-2010 |
Information technology - Security techniques - IT network security - Part 4: Securing REmote access 信息技术 安全技术 IT网络安全 第4部分:远程接入的安全保护 |
China National Standards RE |
English PDF |
GB/T 25067-2010 |
Information technology - Security techniques - REquirements for bodies providing audit and certification of information security management systems 信息技术 安全技术 信息安全管理体系审核认证机构的要求 |
China National Standards RE |
English PDF |
GB/T 25065-2010 |
Information security technology - Public key infrastructuRE - Security requirements for signature creation applications 信息安全技术 公钥基础设施 签名生成应用程序的安全要求 |
China National Standards RE |
English PDF |
GB/T 25064-2010 |
Information security technology - Public key infrastructuRE - Electronic signature formats specification 信息安全技术 公钥基础设施 电子签名格式规范 |
China National Standards RE |
English PDF |
GB/T 25063-2010 |
Information security technology - Testing and evaluation REquirement for server security 信息安全技术 服务器安全测评要求 |
China National Standards RE |
English PDF |
GB/T 25061-2010 |
Information security technology - Public key infrastructuRE - XML digital signature syntax and processing specification 信息安全技术 公钥基础设施 XML数字签名语法与处理规范 |
China National Standards RE |
English PDF |
GB/T 25060-2010 |
Information security techniques - Public key infrastructuRE - Interface specification of X.509 digital certificates application 信息安全技术 公钥基础设施 X.509数字证书应用接口规范 |
China National Standards RE |
English PDF |
Find out:25312Items | To Page of: First -Previous-Next -Last | [151] [152] [153] [154] [155] [156] [157] |