GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19915.1-2005 |
ProceduRE of plate and tube agglutination for antibody against Streptococcus suis Type2 猪链球菌2型平板和试管凝集试验操作规程 |
China National Standards RE |
English PDF |
GB/T 7975-2005 |
Paper and board-Determination of color(diffuse REflectance method) 纸和纸板 颜色的测定(漫反射法) |
China National Standards RE |
English PDF |
GB/T 3903.9-2005 |
Footwear-Test methods for insoles-Heel pin holding stREngh 鞋类-内底试验方法-跟部持钉力 |
China National Standards RE |
English PDF |
GB/T 3903.8-2005 |
Footwear-Test methods for insoles-Delamination REsistance 鞋类-内底试验方法-层间剥离强度 |
China National Standards RE |
English PDF |
GB/T 2679.7-2005 |
Board-Determination of punctuRE resistance 纸板 戳穿强度的测定 |
China National Standards RE |
English PDF |
GB/T 1543-2005 |
Paper and board-Determination of Opacity(paper backing)-Diffuse REflectance method 纸和纸板 不透明度(纸背衬)的测定(漫反射法) |
China National Standards RE |
English PDF |
GB/T 12032-2005 |
Paper and board-pREparation of a offset print for test gloss 纸和纸板 印刷光泽度印样的制备 |
China National Standards RE |
English PDF |
GB/T 19909-2005 |
Product of geographical indication-Castanea henryi(skan)REhd.et wils Jianou 地理标志产品 建瓯锥栗 |
China National Standards RE |
English PDF |
GB/T 3903.6-2005 |
Footwear-Determination of slip REsistance 鞋类通用试验方法-防滑性能 |
China National Standards RE |
English PDF |
GB/T 19879-2005 |
Steel Plates For Building StructuRE 建筑结构用钢板 |
China National Standards RE |
English PDF |
GB/T 5170.18-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperatuRE/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 |
China National Standards RE |
English PDF |
GB/T 10762-2005 |
Method of mass measuREment for industrial and mining electric locomotive 工矿电机车重量测定方法 |
China National Standards RE |
English PDF |
GB/T 4307-2005 |
Lifting hook-NomenclatuRE 起重吊钩 术语 |
China National Standards RE |
English PDF |
GB/T 3871.12-2005 |
Agricultural Tractors-Test proceduREs-Part 12:Working Tests 农业拖拉机 试验规程 第12部分 使用试验 |
China National Standards RE |
English PDF |
GB/T 3871.11-2005 |
Agricultural tractors-Test proceduREs-Part 11:Suitability tests for hot atmosphere 农业拖拉机 试验规程 第11部分:高温性能试验 |
China National Standards RE |
English PDF |
GB/T 19956.2-2005 |
Positive-displacement cacuum pumps-MeasuREment of performance characteristics Part2:Measurement of ultimate pressure 容积真空泵性能测量方法 第2部分:极限压力的测量 |
China National Standards RE |
English PDF |
GB/T 19956.1-2005 |
Positive-displacement cacuum pumps-MeasuREment of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards RE |
English PDF |
GB/T 19955.2-2005 |
Vapour vacuum pumps-MeasuREment of performance characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分:临界前级压力的测量 |
China National Standards RE |
English PDF |
GB/T 19955.1-2005 |
Vapour vacuum pumps-MeasuREment of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards RE |
English PDF |
GB/T 19939-2005 |
Technical REquirements for Crid Connection of PV System 光伏系统并网技术要求 |
China National Standards RE |
English PDF |
GB/T 19936.1-2005 |
Gears-FZG test proceduREs-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards RE |
English PDF |
GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,centRE distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards RE |
English PDF |
GB/T 19934.1-2005 |
Hydraulic fluid power-Fatigue pREssure testing of metal pressure-containing envelopes-Part 1:Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分:试验方法 |
China National Standards RE |
English PDF |
GB/T 19932-2005 |
Earth-moving machinery-Hydraulic excavators-Laboratory tests and performance REquirements for operator protective guards 土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求 |
China National Standards RE |
English PDF |
GB/T 19931-2005 |
Earth-moving machinery-TREnchers-Definitions and commercial specifications 土方机械 挖沟机 术语和商业规范 |
China National Standards RE |
English PDF |
GB/T 19930-2005 |
Earth-moving machinery-Tip-Over Protection StructuRE(TOPS)for compact excavators-Laboratory tests and performance requirements 土方机械 小型挖掘机 倾翻保护结构的试验室试验和性能要求 |
China National Standards RE |
English PDF |
GB/T 19925-2005 |
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of pREferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards RE |
English PDF |
GB/T 1883.2-2005 |
REciprocating internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance 往复式内燃机 词汇 第2部分:发动机维修术语 |
China National Standards RE |
English PDF |
GB/T 1883.1-2005 |
REciprocating internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation 往复式内燃机 词汇 第1部分:发动机设计和运行术语 |
China National Standards RE |
English PDF |
GB/T 12224-2005 |
General REquirements for industrial steel valves 钢制阀门 一般要求 |
China National Standards RE |
English PDF |
GB/T 9769-2005 |
Rim contour measuRE 轮辋轮廓检测 |
China National Standards RE |
English PDF |
GB/T 7985-2005 |
Conveyor belts -- Method for the determination of the tear propagation REsistance of textile conveyor belts 输送带 织物芯输送带抗撕裂扩大性试验方法 |
China National Standards RE |
English PDF |
GB/T 5754.2-2005 |
Steel cord conveyor belt -- Longitudinal test -- Part 2: MeasuREment of tensile strength 钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定 |
China National Standards RE |
English PDF |
GB/T 3402.1-2005 |
Plastics Homopolymer and copolymer REsins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分:命名体系和规范基础 |
China National Standards RE |
English PDF |
GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperatuRE of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards RE |
English PDF |
GB/T 20027-2005 |
Rubber-or plastics-coated fabrics -- Determiation of bursting stREngth 橡胶或塑料涂覆织物 破裂强度的测定 |
China National Standards RE |
English PDF |
GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- REfrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards RE |
English PDF |
GB/T 20022-2005 |
Plastics -- Homopolymer and Copolymer REsins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards RE |
English PDF |
GB/T 20021-2005 |
Heat REsistant conveyor belts of duck construction 帆布芯耐热输送带 |
China National Standards RE |
English PDF |
GB/T 1695-2005 |
Rubber,vulcanized -- Determination of electrical bREakdown strength and voltage resistant at commercial power frequency 硫化橡胶 工频击穿电压强度和耐电压的测定方法 |
China National Standards RE |
English PDF |
GB/T 3903.14-2005 |
Footwear-Test methods for outsoles-Needle tear stREngth 鞋类-外底试验方法-针撕破强度 |
China National Standards RE |
English PDF |
GB/T 3903.12-2005 |
Footwear-Test methods for outsoles-Tear stREngh 鞋类-外底试验方法-撕裂强度 |
China National Standards RE |
English PDF |
GB/T 3903.11-2005 |
Footwear-Test methods for insoles,lining and insocks-perspiration REsistance 鞋类-内底、衬里和内垫试验方法-耐汗性 |
China National Standards RE |
English PDF |
GB 19891-2005 |
Safety of machinery-Hygiene REquirements for the design of machinery 机械安全 机械设计的卫生要求 |
China National Standards RE |
English PDF |
GB/T 19920-2005 |
Container buttREss fitting for ships 船用集装箱支撑件 |
China National Standards RE |
English PDF |
GB/T 19919-2005 |
Small craft-Windows,portlights,hatches,deadlights and doors StREngth and watertightness requirements 小艇 窗、舷窗、舱口盖、风暴盖和门 强度和密封性要求 |
China National Standards RE |
English PDF |
GB/T 19912-2005 |
Safety code for the rubber-tyREd transtainer 轮胎式集装箱门式起重机安全规程 |
China National Standards RE |
English PDF |
GB/T 19911-2005 |
Shipbuilding-Inland navigation-bucket DREdgers-Scale of bucket capacities 造船 内河 链斗挖泥船挖斗容量标定 |
China National Standards RE |
English PDF |
GB/T 19910-2005 |
Technical REquirements for electronic control system of motor-vehicles engine being overhauled 汽车发动机电子控制系统修理技术要求 |
China National Standards RE |
English PDF |
GB/T 19816.7-2005 |
PREparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards RE |
English PDF |
GB/T 19816.6-2005 |
PREparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards RE |
English PDF |
GB/T 19816.5-2005 |
PREparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards RE |
English PDF |
GB/T 18570.9-2005 |
PREparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards RE |
English PDF |
GB/T 18570.8-2005 |
PREparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法 |
China National Standards RE |
English PDF |
GB/T 18570.5-2005 |
PREparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards RE |
English PDF |
GB/T 18570.3-2005 |
PREparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards RE |
English PDF |
GB/T 18570.10-2005 |
PREparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards RE |
English PDF |
GB/T 12130-2005 |
Mediccal hyperbaric chamber pREssurized with air 医用空气加压氧舱 |
China National Standards RE |
English PDF |
GB 5908-2005 |
flame arREsters for petroleum tanks 石油储罐阻火器 |
China National Standards RE |
English PDF |
GB 3445-2005 |
Indoor fiRE hydrant 室内消火栓 |
China National Standards RE |
English PDF |
GB 3033.2-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 2:Additional colours for diffeREnt media and/or functions 船舶与海上技术 管路系统内含物的识别颜色 第2部分:不同介质和(或)功能的附加颜色 |
China National Standards RE |
English PDF |
GB 5226.4-2005 |
Safety of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC REquirements for sewing machines,units and systems 机械安全 机械电气设备 第31部分:缝纫机、缝制单元和缝制系统的特殊安全和EMC要求 |
China National Standards RE |
English PDF |
GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:REquirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分:电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards RE |
English PDF |
GB/T 6148-2005 |
Test method for temperatuRE-resistance coefficient of precision resistance alloys 精密电阻合金电阻温度系数测试方法 |
China National Standards RE |
English PDF |
GB/T 6147-2005 |
Test method for thermoelectric power of pREcision resistance alloys 精密电阻合金热电动势率 测试方法 |
China National Standards RE |
English PDF |
GB/T 19902.2-2005 |
Industrial automation systems and integration-Manufacturing softwaRE capability profiling for interoperability-Part 2:Profiling methodology 工业自动化系统与集成--制造软件互操作性能力建规 第2部分:建规方法论 |
China National Standards RE |
English PDF |
GB/T 19902.1-2005 |
Industrial automation systems and integration-Manufacturing softwaRE capability profiling for interoperability-Part 1:Framework 工业自动化系统与集成--制造软件互操作性能力建规 第1部分:框架 |
China National Standards RE |
English PDF |
GB/T 19899-2005 |
Binary diREct voltage signals for process Measurement and control systems 过程测量和控制系统用二进制 直流电压信号 |
China National Standards RE |
English PDF |
GB/T 19898-2005 |
Industrial-Process measuREment and control-Documentation of application software 工业过程测量和控制 应用软件文档集 |
China National Standards RE |
English PDF |
GB/T 19897.4-2005 |
Automatic Meter REading System Lower Layer Communication Protocol Part 4:Data link layer using HDLC protocol 自动抄表系统低层通信协议 第4部分:基于HDLC协议的链路层 |
China National Standards RE |
English PDF |
GB/T 19897.3-2005 |
Automatic Meter REading System Lower Layer Communication Protocol Part 3:Physical layer services and procedures for connection oriented asynchronous data exchange 自动抄表系统低层通信协议 第3部分:面向连接的异步数据交换的物理层服务进程 |
China National Standards RE |
English PDF |
GB/T 19897.2-2005 |
Automatic Meter REading System Lower Layer Communication Protocol Part 2:Use of area networks on twisted pair with carrier signalling 自动抄表系统低层通信协议 第2部分:基于双绞线载波信号的局域网使用 |
China National Standards RE |
English PDF |
GB/T 19897.1-2005 |
Automatic Meter REading System Lower Layer Communication Protocol Part 1:Direct local data exchange 自动抄表系统低层通信协议 第1部分:直接本地数据交换 |
China National Standards RE |
English PDF |
GB/T 19896-2005 |
DegREes of projected image sharpness for 70,35and 16mm motion-picture projection systems 70、35和16mm电影放映系统 画面清晰度等级 |
China National Standards RE |
English PDF |
GB/T 19895.1-2005 |
Projection in indoor rooms-ScREen illumination test for still projectors 室内放映 幻灯、投影放映设备 银幕照度的测定方法 |
China National Standards RE |
English PDF |
GB/T 19894-2005 |
Digital still-pictuRE cameras-Methods for measuring opto-electronic conversion functions(OECFs) 数码照相机 光电转换函数(OECFs)的测量方法 |
China National Standards RE |
English PDF |
GB/T 19890-2005 |
Acoustics-High intensity focused ultrasound(HIFU)measuREments of acoustic power and field characteristics 声学 高强度聚焦超声(HIFU)声功率和声场特性的测量 |
China National Standards RE |
English PDF |
GB/T 19889.7-2005 |
Acoustics-MeasuREment of sound insulation in buildings and of building elements-Part 7:Field measurements of impact sound insulation of floors 声学 建筑和建筑构件隔声测量 第7部分:楼板撞击声隔声的现场测量 |
China National Standards RE |
English PDF |
GB/T 19889.6-2005 |
Acoustics-MeasuREment of sound insulation in buildings and of building elements-Part 6:Laboratory measurements of impact sound insulation of floors 声学 建筑和建筑构件隔声测量 第6部分:楼板撞击声隔声的实验室测量 |
China National Standards RE |
English PDF |
GB/T 19889.4-2005 |
Acoustics-MeasuREment of sound insulation in buildings and of building elements-Part4:Field measurements of airborne sound insulation between rooms 声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量 |
China National Standards RE |
English PDF |
GB/T 19889.3-2005 |
Acoustics-MeasuREment of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements 声学 建筑和建筑构件隔声测量 第3部分:建筑构件空气声隔声的实验室测量 |
China National Standards RE |
English PDF |
GB/T 19889.2-2005 |
Acoustics-MeasuREment of sound insulation in buildings and of building elements-Part2:Determination,verification and application of precision data 声学 建筑和建筑构件隔声测量 第2部分:数据精密度的确定、验证和应用 |
China National Standards RE |
English PDF |
GB/T 19889.1-2005 |
Acoustics-MeasuREment of sound insulation in buildings and of building elements-Part 1:Requirements for laboratory test facilities with suppressed flanking transmission 声学 建筑和建筑构件隔声测量 第1部分:侧向传声受抑制的实验室测试 设施要求 |
China National Standards RE |
English PDF |
GB/T 19888.1-2005 |
Acoustics-Stationary audible warning devices used outdoors-Part 1:Field measuREments for determination of sound emission quantities 声学 户外用固定式听觉报警器 第1部分:声发射量的现场测定 |
China National Standards RE |
English PDF |
GB/T 19887-2005 |
Acoustics-MeasuREment of the in situ sound attenuation of a removable screen 声学 可移动屏障声衰减的现场测量 |
China National Standards RE |
English PDF |
GB/T 19886-2005 |
Acoustics-Guidelines for noise control by enclosuREs and cabins 声学 隔声罩和隔声间噪声控制指南 |
China National Standards RE |
English PDF |
GB/T 19885-2005 |
Acoustics-Determination of sound insulation performance of cabins-laborartory and in situ measuREments 声学 隔声间的隔声性能测定 实验室和现场测量 |
China National Standards RE |
English PDF |
GB/T 19882.1-2005 |
Automatic Meter REading System Part 1:General Principles 自动抄表系统 第1部分:总则 |
China National Standards RE |
English PDF |
GB/T 17249.2-2005 |
Acoustics-Guidelines for the design of low-noise workplaces-Part 2:Noise control measuREs 声学 低噪声工作场所设计指南 第2部分:噪声控制措施 |
China National Standards RE |
English PDF |
GB/T 17214.4-2005 |
Operating conditions for industrial-process measuREment and control equipment Part 4:Corrosive and erosive influences 工业过程测量和控制装置的工作条件 第4部分:腐蚀和侵蚀影响 |
China National Standards RE |
English PDF |
GB/T 17214.2-2005 |
Operating conditions for industrial-process measuREment and control equipment Part 2:Power 工业过程测量和控制装置的工作条件 第2部分:动力 |
China National Standards RE |
English PDF |
GB/T 17213.9-2005 |
Industrial-process control valves Part 2-3:Flow capacity-Test proceduREs 工业过程控制阀 第2-3部分:流通能力 试验程序 |
China National Standards RE |
English PDF |
GB/T 17213.16-2005 |
Industrial-process control valves Part 8-4:Noise considerations-PREdiction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards RE |
English PDF |
GB/T 17213.15-2005 |
Industrial-process control valves Part 8-3:Noise considerations-Control valve aerodynamic noise pREdiction method 工业过程控制阀 第8-3部分:噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards RE |
English PDF |
GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capacity Section Four:InheREnt flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards RE |
English PDF |
GB/T 16656.502-2005 |
Industrial automation systems and integration Product data REpresentation and exchange Part 502:Application interpreted construct:Shell-based wireframe 工业自动化系统与集成 产品数据表达与交换 第502部分:应用解释构:基于壳的线框 |
China National Standards RE |
English PDF |
GB/T 16656.501-2005 |
Industrial automation systems and integration Product data REpresentation and exchange Part 501:Application interpreted construct:Edge-based wireframe 工业自动化系统与集成 产品数据表达与交换 第501部分:应用解释构造:基于边的线框 |
China National Standards RE |
English PDF |
GB/T 10047.1-2005 |
Camera Part 1:civil miniatuRE camera 照相机 第1部分:民用小型照相机 |
China National Standards RE |
English PDF |
GB 19881-2005 |
Safety REgulation for dust explosion prevention in flax fiber processing system 亚麻纤维加工系统粉尘防爆安全规程 |
China National Standards RE |
English PDF |
GB/T 19878-2005 |
General specifications for capacitance type & REsistance type grain moisture tester 电容法和电阻法粮食水分测定仪 通用技术条件 |
China National Standards RE |
English PDF |
Find out:25312Items | To Page of: First -Previous-Next -Last | [209] [210] [211] [212] [213] [214] [215] |