China National Standards

China RE GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "RE" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 43258.3-2023 Road vehicles Diagnostic communications over Internet Protocol (DoIP) Part 3: WiREd vehicle interface based on IEEE 802.3
    道路车辆 基于因特网协议的诊断通信(DoIP) 第3部分:基于IEEE 802.3有线车辆接口
    China National Standards
    RE

    English PDF
    GB/T 43255-2023 Test method for low temperatuRE cold starting performance of fuel cell electric vehicles
    燃料电池电动汽车低温冷起动性能试验方法
    China National Standards
    RE

    English PDF
    GB/T 43254-2023 Functional safety REquirements and test methods for drive motor systems for electric vehicles
    电动汽车用驱动电机系统功能安全要求及试验方法
    China National Standards
    RE

    English PDF
    GB/T 43253.4-2023 Road vehicles Functional safety audit and assessment methods Part 4: HardwaRE level
    道路车辆 功能安全审核及评估方法 第4部分:硬件层面
    China National Standards
    RE

    English PDF
    GB/T 43253.3-2023 Road vehicles - Functional safety audit and assessment methods Part 3: SoftwaRE level
    道路车辆 功能安全审核及评估方法 第3部分:软件层面
    China National Standards
    RE

    English PDF
    GB/T 43253.1-2023 Road vehicles - Functional safety audit and assessment methods - Part 1: General REquirements
    道路车辆 功能安全审核及评估方法 第1部分:通用要求
    China National Standards
    RE

    English PDF
    GB/T 43250-2023 Active infraREd detection system for automobiles
    汽车用主动红外探测系统
    China National Standards
    RE

    English PDF
    GB/T 43249-2023 Passive infraREd detection system for automobiles
    汽车用被动红外探测系统
    China National Standards
    RE

    English PDF
    GB/T 19515-2023 Road vehicles REusability and recycling rates requirements and calculation methods
    道路车辆 可再利用率和可回收利用率 要求及计算方法
    China National Standards
    RE

    English PDF
    GB/T 23101.4-2023 Surgical implants Hydroxyapatite Part 4: Determination of coating bond stREngth
    外科植入物 羟基磷灰石 第4部分:涂层粘结强度的测定
    China National Standards
    RE

    English PDF
    GB/T 2516-2023 Ordinary thREad limit deviation
    普通螺纹 极限偏差
    China National Standards
    RE

    English PDF
    GB/T 43277.2-2023 Stop clamps and flow REgulators for medical infusion (blood transfusion) equipment Part 2: Liquid contact scale flow regulators
    医用输液(输血)器具用止流夹和流量调节器 第2部分:液体接触式刻度流量调节器
    China National Standards
    RE

    English PDF
    GB/T 43277.1-2023 Stop clamps and flow REgulators for medical infusion (blood transfusion) equipment Part 1: Non-liquid contact stop clamps and flow regulators
    医用输液(输血)器具用止流夹和流量调节器 第1部分:非液体接触式止流夹和流量调节器
    China National Standards
    RE

    English PDF
    GB/T 43349-2023 CalcaREous materials Determination of neutralization value Titration method
    石灰质材料 中和值的测定 滴定法
    China National Standards
    RE

    English PDF
    GB/T 29549.1-2023 OffshoRE oil fixed platform module drilling rig Part 1: Design
    海上石油固定平台模块钻机 第1部分:设计
    China National Standards
    RE

    English PDF
    GB/T 40853.2-2023 High fREquency inductive components Electrical characteristics and measurement methods Part 2: Rated current of inductors for DC-DC converters
    高频感性元件 电特性及其测量方法 第2部分:DC-DC变换器用电感器额定电流
    China National Standards
    RE

    English PDF
    GB/T 28869.3-2023 Magnetic coREs made of soft magnetic materials - Measurement methods - Part 3: Magnetic properties at high excitation levels
    软磁材料制成的磁心 测量方法 第3部分:高励磁水平下的磁特性
    China National Standards
    RE

    English PDF
    GB/T 28869.2-2023 Magnetic coREs made of soft magnetic materials - Methods of measurement - Part 2: Magnetic properties at low excitation levels
    软磁材料制成的磁心 测量方法 第2部分:低励磁水平下的磁特性
    China National Standards
    RE

    English PDF
    GB/T 43232-2023 Fasteners - Ultrasonic measuREment method of axial stress
    紧固件 轴向应力超声测量方法
    China National Standards
    RE

    English PDF
    GB/T 43262-2023 Electromagnetic InterfeREnce Diagnostic Guidelines
    电磁干扰诊断导则
    China National Standards
    RE

    English PDF
    GB/T 43248-2023 Electric and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measuREment for the protection of off-board receivers below 30 MHz
    电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法
    China National Standards
    RE

    English PDF
    GB/T 43098.2-2023 Analysis methods for water tREatment agents Part 2: Determination of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS)
    水处理剂分析方法 第2部分:砷、汞、镉、铬、铅、镍、铜含量的测定 电感耦合等离子体质谱法(ICP-MS)
    China National Standards
    RE

    English PDF
    GB/T 23947.3-2023 General method for determination of arsenic in inorganic chemical products Part 3: Atomic fluoREscence spectrometry
    无机化工产品中砷测定的通用方法 第3部分:原子荧光光谱法
    China National Standards
    RE

    English PDF
    GB/T 43326.4-2023 Snow blowers - Safety REquirements and test methods - Part 4: Additional national and regional requirements
    抛雪机 安全要求和试验方法 第4部分:国家和地区的附加要求
    China National Standards
    RE

    English PDF
    GB/T 43326.3-2023 Snow throwers - Safety REquirements and test methods - Part 3: Mounted snow throwers
    抛雪机 安全要求和试验方法 第3部分:坐骑式抛雪机
    China National Standards
    RE

    English PDF
    GB/T 43326.2-2023 Snow blowers - Safety REquirements and test methods - Part 2: Step-by-step snow blowers
    抛雪机 安全要求和试验方法 第2部分:步进式抛雪机
    China National Standards
    RE

    English PDF
    GB/T 43326.1-2023 Snow blowers - Safety REquirements and test methods - Part 1: Terminology and general tests
    抛雪机 安全要求和试验方法 第1部分:术语和通用试验
    China National Standards
    RE

    English PDF
    GB/T 30553-2023 High voltage diREct current transmission based on voltage source converter
    基于电压源换流器的高压直流输电
    China National Standards
    RE

    English PDF
    GB/T 43257.6-2023 Safety test methods for radioactive material transport containers Part 6: Heat REsistance test
    放射性物品运输容器安全试验方法 第6部分:耐热试验
    China National Standards
    RE

    English PDF
    GB/T 4960.2-2023 Terminology of Nuclear Science and Technology Part 2: Fission REactor
    核科学技术术语 第2部分:裂变反应堆
    China National Standards
    RE

    English PDF
    GB/T 43413-2023 Non-destructive testing InfraREd thermal imaging testing General rules for thermoelastic stress measurement methods
    无损检测 红外热成像检测 热弹性应力测量方法通则
    China National Standards
    RE

    English PDF
    GB/T 43412-2023 REcommended process specifications for resistance spot welding of metal sheets
    金属薄板电阻点焊推荐工艺规范
    China National Standards
    RE

    English PDF
    GB/T 43321-2023 REcommended process specifications for brazing copper and copper alloys
    铜及铜合金钎焊推荐工艺规范
    China National Standards
    RE

    English PDF
    GB/T 25774.3-2023 Inspection of welding materials Part 3: PREparation and inspection of T-joint fillet weld specimens
    焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验
    China National Standards
    RE

    English PDF
    GB/T 25774.2-2023 Inspection of welding materials Part 2: PREparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel
    焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备
    China National Standards
    RE

    English PDF
    GB/T 25774.1-2023 Examination of welding materials Part 1: PREparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals
    焊接材料的检验 第1部分: 钢、镍及镍合金熔敷金属力学性能试样的制备
    China National Standards
    RE

    English PDF
    GB/T 9460-2023 Copper and copper alloy welding wiRE
    铜及铜合金焊丝
    China National Standards
    RE

    English PDF
    GB/T 26215-2023 Capacitors for converter valve damping and absorption circuits in high-voltage diREct current transmission systems
    高压直流输电系统换流阀阻尼吸收回路用电容器
    China National Standards
    RE

    English PDF
    GB/T 19494.3-2023 Mechanized sampling of coal Part 3: Determination of pREcision and bias testing
    煤炭机械化采样 第3部分:精密度测定和偏倚试验
    China National Standards
    RE

    English PDF
    GB/T 19494.2-2023 Mechanized sampling of coal Part 2: PREparation of coal samples
    煤炭机械化采样 第2部分:煤样的制备
    China National Standards
    RE

    English PDF
    GB/T 7186-2023 Coal pREparation terminology
    选煤术语
    China National Standards
    RE

    English PDF
    GB/T 27654-2023 wood pREservatives
    木材防腐剂
    China National Standards
    RE

    English PDF
    GB/T 27651-2023 Classification and REquirements for the use of anticorrosive wood
    防腐木材的使用分类和要求
    China National Standards
    RE

    English PDF
    GB/T 23229-2023 Analytical methods for waterborne wood pREservatives
    水载型木材防腐剂的分析方法
    China National Standards
    RE

    English PDF
    GB/T 43314-2023 Silicone rubber, determination of phenyl and vinyl content, proton nuclear magnetic REsonance spectroscopy
    硅橡胶 苯基和乙烯基含量的测定 核磁共振氢谱法
    China National Standards
    RE

    English PDF
    GB/T 13871.4-2023 Rotating shaft lip seals with elastomer sealing elements - Part 4: Performance test proceduREs
    密封元件为弹性体材料的旋转轴唇形密封圈 第4部分:性能试验程序
    China National Standards
    RE

    English PDF
    GB/T 19520.22-2023 Mechanical structuREs of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-110: Residential racks and cabinets for smart homes
    电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分:智慧房屋用住宅机架和机柜
    China National Standards
    RE

    English PDF
    GB/T 19520.21-2023 Mechanical StructuRE of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions Part 3-109: Chassis Dimensions of Embedded Computing Devices
    电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-109部分:嵌入式计算设备的机箱尺寸
    China National Standards
    RE

    English PDF
    GB/T 19520.20-2023 Mechanical structuRE of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-108: Dimensions of R-type sub-boxes and plug-ins
    电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-108部分:R型插箱和插件的尺寸
    China National Standards
    RE

    English PDF
    GB/T 20914.5-2023 Dies Nitrogen gas springs Part 5: Safety REgulations for nitrogen springs
    冲模 氮气弹簧 第5部分:氮气弹簧安全规范
    China National Standards
    RE

    English PDF
    GB/T 43189-2023 Nuclear instrumentation - NomenclatuRE (identification) of scintillator and scintillation detectors and standard dimensions of scintillator
    核仪器仪表 闪烁体和闪烁探测器的命名(标识)以及闪烁体的标准尺寸
    China National Standards
    RE

    English PDF
    GB/T 43443-2023 Internet of Things Smart Agricultural Information System Interface REquirements
    物联网 智慧农业信息系统接口要求
    China National Standards
    RE

    English PDF
    GB/T 43441.1-2023 Information technology digital twin part 1: general REquirements
    信息技术 数字孪生 第1部分:通用要求
    China National Standards
    RE

    English PDF
    GB/T 43440-2023 Internet of Things Smart AgricultuRE Data Transmission Technology Application Guide
    物联网 智慧农业数据传输技术应用指南
    China National Standards
    RE

    English PDF
    GB/T 43433-2023 Information technology cloud computing virtual machine REsource management system testing method
    信息技术 云计算 虚拟机资源管理系统测试方法
    China National Standards
    RE

    English PDF
    GB/T 15548-2023 General technical conditions for thREe-phase synchronous generators driven by reciprocating internal combustion engines
    往复式内燃机驱动的三相同步发电机通用技术条件
    China National Standards
    RE

    English PDF
    GB/T 43261-2023 Product acceptance plan combining zero acceptance sampling system with process control proceduREs
    零接收数抽样系统与过程控制程序相结合的产品验收方案
    China National Standards
    RE

    English PDF
    GB/T 22553-2023 Guidelines for assessing measuREment uncertainty using estimates of repeatability, reproducibility and correctness
    利用重复性、再现性和正确度的估计值评定测量不确定度的指南
    China National Standards
    RE

    English PDF
    GB/T 13651-2023 Aviation REtreaded tires
    航空翻新轮胎
    China National Standards
    RE

    English PDF
    GB/T 43316.6-2023 Plastics - Determination of environmental stREss cracking (ESC) resistance - Part 6: Slow strain rate method
    塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法
    China National Standards
    RE

    English PDF
    GB/T 43316.5-2023 Plastics - Determination of environmental stREss cracking (ESC) resistance - Part 5: Constant tensile deformation method
    塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法
    China National Standards
    RE

    English PDF
    GB/T 43316.4-2023 Plastics - Determination of environmental stREss cracking (ESC) resistance - Part 4: Ball or pin pressure method
    塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法
    China National Standards
    RE

    English PDF
    GB/T 43316.3-2023 Plastics - Determination of environmental stREss cracking (ESC) resistance - Part 3: Bending method
    塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法
    China National Standards
    RE

    English PDF
    GB/T 43316.2-2023 Plastics - Determination of environmental stREss cracking (ESC) resistance - Part 2: Constant tensile load method
    塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法
    China National Standards
    RE

    English PDF
    GB/T 43316.1-2023 Plastics - Determination of environmental stREss cracking (ESC) resistance - Part 1: General principles
    塑料 耐环境应力开裂(ESC)的测定 第1部分:通则
    China National Standards
    RE

    English PDF
    GB/T 43297-2023 Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infraREd spectroscopy and UV/visible spectroscopy
    塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法
    China National Standards
    RE

    English PDF
    GB/T 42918.2-2023 Plastics - Thermoplastic polyuREthanes for molding and extrusion - Part 2: Specimen preparation and property determination
    塑料 模塑和挤出用热塑性聚氨酯 第2部分:试样制备和性能测定
    China National Standards
    RE

    English PDF
    GB/T 21461.2-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen pREparation and property determination
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    RE

    English PDF
    GB/T 21461.1-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: NomenclatuRE system and basis for classification
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    RE

    English PDF
    GB/T 19042.6-2023 Evaluation and routine testing of medical imaging departments Part 3-6: Imaging performance acceptance and stability testing of mammography X-ray equipment in bREast tomosynthesis imaging mode
    医用成像部门的评价及例行试验 第3-6部分:乳腺断层合成成像模式下乳腺摄影X射线设备成像性能验收与稳定性试验
    China National Standards
    RE

    English PDF
    GB/T 15241.1-2023 Ergonomic principles RElated to mental load Part 1: Mental load terminology and assessment methods
    与心理负荷相关的工效学原则 第1部分:心理负荷术语与测评方法
    China National Standards
    RE

    English PDF
    GB/T 5338.5-2023 Series 1 containers - Technical REquirements and test methods - Part 5: Platform and rack-mounted containers
    系列1集装箱 技术要求和试验方法 第5部分:平台和台架式集装箱
    China National Standards
    RE

    English PDF
    GB/T 5338.4-2023 Series 1 containers Technical REquirements and test methods Part 4: Unpressurized dry bulk containers
    系列1集装箱 技术要求和试验方法 第4部分:无压干散货集装箱
    China National Standards
    RE

    English PDF
    GB/T 1835-2023 Series 1 container corner fittings technical REquirements
    系列1集装箱 角件技术要求
    China National Standards
    RE

    English PDF
    GB 31604.47-2023 National food safety standards Food contact materials and products Determination of fluoREscent substances in paper, cardboard and paper products
    食品安全国家标准 食品接触材料及制品 纸、纸板及纸制品中荧光性物质的测定
    China National Standards
    RE

    English PDF
    GB 31612-2023 National Food Safety Standards Hygienic Specifications for the Production of Strain PREparations for Food Processing
    食品安全国家标准 食品加工用菌种制剂生产卫生规范
    China National Standards
    RE

    English PDF
    GB 31604.46-2023 National Food Safety Standards Determination of FREe Phenols and Determination of Migration Amount in Food Contact Materials and Products
    食品安全国家标准 食品接触材料及制品游离酚的测定和迁移量的测定
    China National Standards
    RE

    English PDF
    GB 1903.62-2023 National Food Safety Standards Food Nutritional Enhancers REduced Iron
    食品安全国家标准 食品营养强化剂 还原铁
    China National Standards
    RE

    English PDF
    GB 1886.369-2023 National Food Safety Standard Food Additive Blue Ingot Fruit REd
    食品安全国家标准 食品添加剂 蓝锭果红
    China National Standards
    RE

    English PDF
    GB 31639-2023 National food safety standards: bacterial cultuRE preparations for food processing
    食品安全国家标准 食品加工用菌种制剂
    China National Standards
    RE

    English PDF
    GB 1886.359-2022 National Food Safety Standards Food Additives Gum Base and Its IngREdients
    食品安全国家标准 食品添加剂 胶基及其配料
    China National Standards
    RE

    English PDF
    GB 5413.20-2022 National Food Safety Standard Determination of Choline in Infant and Young ChildREn’s Foods and Dairy Products
    食品安全国家标准 婴幼儿食品和乳品中胆碱的测定
    China National Standards
    RE

    English PDF
    GB 1886.364-2022 National Food Safety Standard Food Additive Bilberry REd
    食品安全国家标准 食品添加剂 越橘红
    China National Standards
    RE

    English PDF
    GB 31652-2021 National Food Safety Standards Hygienic Specifications for the Production of REady-to-Eat Fresh-Cut Fruits and Vegetables
    食品安全国家标准 即食鲜切果蔬生产卫生规范
    China National Standards
    RE

    English PDF
    GB 31607-2021 National food safety standards Limits of pathogenic bacteria in bulk REady-to-eat foods
    食品安全国家标准 散装即食食品中致病菌限量
    China National Standards
    RE

    English PDF
    GB 29921-2021 National Food Safety Standards Limits of Pathogenic Bacteria in PREpackaged Foods
    食品安全国家标准 预包装食品中致病菌限量
    China National Standards
    RE

    English PDF
    GB 19295-2021 National Food Safety Standards Quick Frozen Noodles and PREpared Foods
    食品安全国家标准 速冻面米与调制食品
    China National Standards
    RE

    English PDF
    GB 1886.345-2021 National Food Safety Standard Food Additive Mulberry REd
    食品安全国家标准 食品添加剂 桑椹红
    China National Standards
    RE

    English PDF
    GB 1886.343-2021 National Food Safety Standard Food Additive L-ThREonine
    食品安全国家标准 食品添加剂 L-苏氨酸
    China National Standards
    RE

    English PDF
    GB 1886.323-2021 National Food Safety Standard Food Additive Peanut REd
    食品安全国家标准 食品添加剂 花生衣红
    China National Standards
    RE

    English PDF
    GB 15193.29-2020 National Food Safety Standards Extended Generation REproductive Toxicity Test
    食品安全国家标准 扩展一代生殖毒性试验
    China National Standards
    RE

    English PDF
    GB 31660.9-2019 National food safety standards - Determination of ethoxycarbamate REsidues in edible poultry tissues - High performance liquid chromatography
    食品安全国家标准 家禽可食性组织中乙氧酰胺苯甲酯残留量的测定 高效液相色谱法
    China National Standards
    RE

    English PDF
    GB 31660.8-2019 National food safety standards Determination of azaamphenanthREne residues in cattle edible tissues and milk Liquid chromatography-tandem mass spectrometry
    食品安全国家标准 牛可食性组织及牛奶中氮氨菲啶残留量的测定 液相色谱-串联质谱法
    China National Standards
    RE

    English PDF
    GB 31660.7-2019 National food safety standards Determination of cyproheptadine and clonidine REsidues in pig tissues and urine Liquid chromatography-tandem mass spectrometry
    食品安全国家标准 猪组织和尿液中赛庚啶及可乐定残留量的测定 液相色谱-串联质谱法
    China National Standards
    RE

    English PDF
    GB 31660.6-2019 National Food Safety Standard Determination of REsidues of Five α2-Receptor Agonists in Animal Foods Liquid Chromatography-Tandem Mass Spectrometry
    食品安全国家标准 动物性食品中5种α2-受体激动剂残留量的测定 液相色谱-串联质谱法
    China National Standards
    RE

    English PDF
    GB 31660.5-2019 National food safety standards Determination of amantadine REsidues in animal foods Liquid chromatography-tandem mass spectrometry
    食品安全国家标准 动物性食品中金刚烷胺残留量的测定 液相色谱-串联质谱法
    China National Standards
    RE

    English PDF
    GB 31660.4-2019 National food safety standards Determination of megestrol acetate and medroxyprogesterone acetate REsidues in animal foods Liquid chromatography-tandem mass spectrometry
    食品安全国家标准 动物性食品中醋酸甲地孕酮和醋酸甲羟孕酮残留量的测定 液相色谱-串联质谱法
    China National Standards
    RE

    English PDF
    GB 31660.3-2019 National Food Safety Standard Determination of Trifluralin REsidues in Aquatic Products Gas Chromatography
    食品安全国家标准 水产品中氟乐灵残留量的测定 气相色谱法
    China National Standards
    RE

    English PDF
    GB 31660.2-2019 National Food Safety Standard Determination of octylphenol, nonylphenol, bisphenol A, diethylstilbestrol, estrone, 17α-ethinyl estradiol, 17β-estradiol and estriol REsidues in aquatic products by gas chromatography - mass spectrometry
    食品安全国家标准 水产品中辛基酚、壬基酚、双酚A、已烯雌酚、雌酮、17α-乙炔雌二醇、17β-雌二醇、雌三醇残留量的测定 气相色谱-质谱法
    China National Standards
    RE

    English PDF
    GB 31660.1-2019 National food safety standards Determination of macrolide drug REsidues in aquatic products Liquid chromatography-tandem mass spectrometry
    食品安全国家标准 水产品中大环内酯类药物残留量的测定 液相色谱-串联质谱法
    China National Standards
    RE

    English PDF

    Find out:25312Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards