GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 34650-2017 |
Full face tunnel boring machine—Safety REquirements of shield machine 全断面隧道掘进机 盾构机安全要求 |
China National Standards RE |
English PDF |
GB/T 34651-2017 |
Full face tunnel boring machine—Earth pREssure balance shield machine 全断面隧道掘进机 土压平衡盾构机 |
China National Standards RE |
English PDF |
GB/T 32151.2-2015 |
REquirements of the greenhouse gas emissions accounting and reporting—Part 2: Power grid enterprise 温室气体排放核算与报告要求 第2部分:电网企业 |
China National Standards RE |
English PDF |
GB/T 12690.5-2017 |
Chemical analysis methods for non-raRE earth impurities of rare earth metals and their oxides—Part 5: Determination of cobalt,manganese,lead,nickel,copper,zinc,aluminum,chromium,magnesium,cadmium,vanadium and iron contents 稀土金属及其氧化物中非稀土杂质化学分析方法 第5部分:钴、锰、铅、镍、铜、锌、铝、铬、镁、镉、钒、铁量的测定 |
China National Standards RE |
English PDF |
GB/T 34336-2017 |
REinforced nanoporous aerogel products for thermal insulation 纳米孔气凝胶复合绝热制品 |
China National Standards RE |
English PDF |
GB/T 4513.4-2017 |
Monolithic (unshaped) REfractory products—Part 4: Determination of consistency of castables 不定形耐火材料 第4部分:浇注料流动性的测定 |
China National Standards RE |
English PDF |
GB/T 4513.2-2017 |
Monolithic (unshaped) REfractory products—Part 2:Sampling for testing 不定形耐火材料 第2部分:取样 |
China National Standards RE |
English PDF |
GB/T 4513.7-2017 |
Monolithic (unshaped) REfractory products—Part 7:Tests on pre-formed shapes 不定形耐火材料 第7部分:预制件的测定 |
China National Standards RE |
English PDF |
GB/T 4513.5-2017 |
Monolithic (unshaped) REfractory products—Part5: Preparation and treatment of test pieces 不定形耐火材料 第5部分:试样制备和预处理 |
China National Standards RE |
English PDF |
GB/T 16752-2017 |
Test methods of concREte and reinforced concrete sewer pipes 混凝土和钢筋混凝土排水管试验方法 |
China National Standards RE |
English PDF |
GB/T 34328-2017 |
Light weight thermally stREngthened glass 轻质物理强化玻璃 |
China National Standards RE |
English PDF |
GB/T 34331-2017 |
Test method of Cucumber gREen mottle mosaic virus by transmission electron microscopy 黄瓜绿斑驳花叶病毒透射电子显微镜检测方法 |
China National Standards RE |
English PDF |
GB/T 26278-2017 |
TyRE size substitution guide 轮胎规格替换指南 |
China National Standards RE |
English PDF |
GB/T 34332-2017 |
Chemical analysis of magnesite and dolomite REfractory products 菱镁矿和白云石耐火制品化学分析方法 |
China National Standards RE |
English PDF |
GB/T 4513.6-2017 |
Monolithic (unshaped) REfractory products—Part 6:Measurement of physical properties 不定形耐火材料 第6部分:物理性能的测定 |
China National Standards RE |
English PDF |
GB/T 4513.8-2017 |
Monolithic (unshaped) REfractory products—Part 8: Determination of complementary properties 不定形耐火材料 第8部分:特殊性能的测定 |
China National Standards RE |
English PDF |
GB/T 4513.3-2017 |
Monolithic (unshaped) REfractory products—Part 3:Characterization as received 不定形耐火材料 第3部分:基本特性 |
China National Standards RE |
English PDF |
GB/T 34554-2017 |
Test method of structural adhesion REliability for building glass curtain wall 建筑玻璃幕墙粘接结构可靠性试验方法 |
China National Standards RE |
English PDF |
GB/T 34559-2017 |
Test method for compREssive property of C/C composites 碳/碳复合材料压缩性能试验方法 |
China National Standards RE |
English PDF |
GB/T 34551-2017 |
Test method for alkali REsistance of glass fiber reinforced polymer bars in high temperature condition 玻璃纤维增强复合材料筋高温耐碱性试验方法 |
China National Standards RE |
English PDF |
GB/T 34555-2017 |
Test method of air permeability, watertightness,wind load REsistance performance for building skylight system 建筑采光顶气密、水密、抗风压性能检测方法 |
China National Standards RE |
English PDF |
GB/T 34557-2017 |
Latex and REdispersible polymer powder for mortar and concrete 砂浆、混凝土用乳胶和可再分散乳胶粉 |
China National Standards RE |
English PDF |
GB/T 34561-2017 |
Photovoltaic(PV)glass—Test method and performance evaluation of exposuRE to damp heat outdoor environment 光伏玻璃 湿热大气环境自然曝露试验方法及性能评价 |
China National Standards RE |
English PDF |
GB/T 34549-2017 |
Sanitary waRE—Smart toilet 卫生洁具 智能坐便器 |
China National Standards RE |
English PDF |
GB/T 34563-2017 |
Terms of the sanitary waRE machinery 卫生陶瓷机械术语 |
China National Standards RE |
English PDF |
GB/T 34329-2017 |
General REquirements of fiber reinforced plastics pressure vessel 纤维增强塑料压力容器通用要求 |
China National Standards RE |
English PDF |
GB/T 18772-2017 |
Technical REquirement for environmental monitory on municipal solid waste sanitary landfill 生活垃圾卫生填埋场环境监测技术要求 |
China National Standards RE |
English PDF |
GB/T 6730.14-2017 |
Iron oREs—Determination of calcium content—Flame atomic absorption spectrometric method 铁矿石 钙含量的测定 火焰原子吸收光谱法 |
China National Standards RE |
English PDF |
GB/T 34611-2017 |
Rigid polyuREthane spray polyethylene winding prefabricated directly buried insulating pipes 硬质聚氨酯喷涂聚乙烯缠绕预制直埋保温管 |
China National Standards RE |
English PDF |
GB/T 34614-2017 |
Photovoltaic(PV)glass—Test method and performance evaluation of exposuRE to urban environment in temperate climate 光伏玻璃 温和气候下城市环境自然曝露试验方法及性能评价 |
China National Standards RE |
English PDF |
GB/T 34613-2017 |
Photovoltaic(PV)glass—Test method and performance evaluation of exposuRE to hot-dry and sand-dust environment 光伏玻璃 干热砂尘大气环境自然曝露试验方法及性能评价 |
China National Standards RE |
English PDF |
GB/T 34616-2017 |
General technical REquirements of pedestrian automatic doors 人行自动门通用技术要求 |
China National Standards RE |
English PDF |
GB/T 13242-2017 |
Iron oREs—Low-temperature disintegration test—Method using cold tumbling after static reduction 铁矿石 低温粉化试验 静态还原后使用冷转鼓的方法 |
China National Standards RE |
English PDF |
GB/T 5237.5-2017 |
Wrought aluminium alloy extruded profiles for architectuRE—Part 5: Paint coating profiles 铝合金建筑型材 第5部分:喷漆型材 |
China National Standards RE |
English PDF |
GB/T 5237.6-2017 |
Wrought aluminium alloy extruded profiles for architectuRE—Part 6: Thermal barrier profiles 铝合金建筑型材 第6部分:隔热型材 |
China National Standards RE |
English PDF |
GB/T 6730.49-2017 |
Iron oREs—Determination of potassium content—Flame atomic absorption spectrometric method 铁矿石 钾含量的测定 火焰原子吸收光谱法 |
China National Standards RE |
English PDF |
GB/T 5237.1-2017 |
Aluminium alloy extruded profiles for architectuRE—Part 1:Mill finish profiles 铝合金建筑型材 第1部分:基材 |
China National Standards RE |
English PDF |
GB/T 34482-2017 |
Determination of thermal transmittance for architectuRE aluminium alloy thermal barrier profiles 建筑用铝合金隔热型材传热系数测定方法 |
China National Standards RE |
English PDF |
GB/T 5237.2-2017 |
Wrought aluminium alloy extruded profiles for architectuRE—Part 2:Anodized profiles 铝合金建筑型材 第2部分:阳极氧化型材 |
China National Standards RE |
English PDF |
GB/T 5237.3-2017 |
Wrought aluminium alloy extruded profiles for architectuRE—Part 3:Electrodeposition coating profiles 铝合金建筑型材 第3部分:电泳涂漆型材 |
China National Standards RE |
English PDF |
GB/T 6730.76-2017 |
Iron oREs—Determination of potassium, sodium, vanadium, copper, zinc, lead, chromium, nickel, cobalt elements—Inductively coupled plasma optical emission spectrometry 铁矿石 钾、钠、钒、铜、锌、铅、铬、镍、钴含量的测定 电感耦合等离子体发射光谱法 |
China National Standards RE |
English PDF |
GB/T 34472-2017 |
General technical REquirements of stainless steel for building curtain wall 建筑幕墙用不锈钢通用技术条件 |
China National Standards RE |
English PDF |
GB/T 34484.1-2017 |
Heat-tREatable steels—Part 1: Non-alloy steels 热处理钢 第1部分:非合金钢 |
China National Standards RE |
English PDF |
GB/T 34560.5-2017 |
Structural steels—Part 5: Technical delivery condition for atmospheric corrosion REsisting steels 结构钢 第5部分:耐大气腐蚀结构钢交货技术条件 |
China National Standards RE |
English PDF |
GB/T 34564.1-2017 |
Cold-word mould steel—Part 1: High toughness and wear-REsistance steels 冷作模具钢 第1部分:高韧性高耐磨性钢 |
China National Standards RE |
English PDF |
GB/T 15970.7-2017 |
Corrosion of metals and alloys—StREss corrosion testing—Part 7: Slow strain rate testing 金属和合金的腐蚀 应力腐蚀试验 第7部分: 慢应变速率试验 |
China National Standards RE |
English PDF |
GB/T 6730.75-2017 |
Iron oREs—Determination of sodium content—Flame atomic absorption spectrometric method 铁矿石 钠含量的测定 火焰原子吸收光谱法 |
China National Standards RE |
English PDF |
GB/T 34477-2017 |
Metallic materials—Sheet and strip—Dent REsistance test method 金属材料 薄板和薄带 抗凹性能试验方法 |
China National Standards RE |
English PDF |
GB/T 34475-2017 |
UREa grade austenitic stainless steel bars 尿素级奥氏体不锈钢棒 |
China National Standards RE |
English PDF |
GB/T 6730.3-2017 |
Iron oREs—Determination of hygroscopic moisture in analytical samples—Gravimetric, Karl Fischer and mass-loss methods 铁矿石 分析样中吸湿水分的测定 重量法、卡尔费休法和质量损失法 |
China National Standards RE |
English PDF |
GB/T 34474.1-2017 |
Determination of banded structuRE of steel—Part1:Micrographic method using standards diagrams 钢中带状组织的评定 第1部分:标准评级图法 |
China National Standards RE |
English PDF |
GB/T 34568-2017 |
Iron oREs for blast furnace and direct reduction feedstocks-Determination of bulk density 高炉和直接还原用铁矿石 体积密度的测定 |
China National Standards RE |
English PDF |
GB/T 34560.4-2017 |
Structural steels—Part 4:Technical delivery conditions for high yield stREngth quenched and tempered structural steel plates 结构钢 第4部分:淬火加回火高屈服强度结构钢板交货技术条件 |
China National Standards RE |
English PDF |
GB/T 34586-2017 |
Road vehicles—Spark-plugs for gas engines—Test methods and REquirements 道路车辆 燃气火花塞 试验方法和要求 |
China National Standards RE |
English PDF |
GB/T 34605-2017 |
Technical REquirements of operation performance assessment for coal-fired flue gas desulfurization installation 燃煤烟气脱硫装备运行效果评价技术要求 |
China National Standards RE |
English PDF |
GB/T 34608-2017 |
Water saving enterprises—Iron oRE mining and mineral processing industry 节水型企业 铁矿采选行业 |
China National Standards RE |
English PDF |
GB/T 16665-2017 |
Monitoring and testing for energy saving of air compREssor unit and air distribution system 空气压缩机组及供气系统节能监测 |
China National Standards RE |
English PDF |
GB/T 34632-2017 |
The blank diameters for rolling unified scREw threads 统一螺纹搓制和滚制前的毛坯直径 |
China National Standards RE |
English PDF |
GB/T 34452-2017 |
Performance REquirements of portable LED luminaires for general lighting 可移式通用LED灯具性能要求 |
China National Standards RE |
English PDF |
GB/T 12105-2017 |
General technical REquirements of electronic keyboards 电子琴通用技术条件 |
China National Standards RE |
English PDF |
GB/T 12106-2017 |
REquirements and methods of environmental test for electronic keyboards 电子琴的环境试验要求和试验方法 |
China National Standards RE |
English PDF |
GB/T 34453-2017 |
General technical REquirements for swing child car 扭扭车通用技术要求 |
China National Standards RE |
English PDF |
GB/T 34595-2017 |
The technical specifications for REmanufacturing of automotive components—Water pump 汽车零部件再制造产品技术规范 水泵 |
China National Standards RE |
English PDF |
GB/T 34590.6-2017 |
Road vehicles—Functional safety—Part 6: Product development at the softwaRE level 道路车辆 功能安全 第6部分:产品开发:软件层面 |
China National Standards RE |
English PDF |
GB/T 18364-2017 |
Filling REceptacle of LPG vehicle 汽车用液化石油气加气口 |
China National Standards RE |
English PDF |
GB/T 34596-2017 |
The technical specifications for REmanufacturing of automotive components—Oil pump 汽车零部件再制造产品技术规范 机油泵 |
China National Standards RE |
English PDF |
GB/T 5237.4-2017 |
Wrought aluminium alloys extruded profiles for architectuRE—Part 4: Powder coating profiles 铝合金建筑型材 第4部分:喷粉型材 |
China National Standards RE |
English PDF |
GB/T 23615.2-2017 |
Thermal barrier materials for architectural aluminum alloy profiles—Part 2: Thermal barrier polyuREthane 铝合金建筑型材用隔热材料 第2部分:聚氨酯隔热胶 |
China National Standards RE |
English PDF |
GB/T 34494-2017 |
Hydrogen decREpitating neodymium iron boron permanent magnetic powder 氢碎钕铁硼永磁粉 |
China National Standards RE |
English PDF |
GB/T 34495-2017 |
Hot pREssed neodymium iron boron permanent magnetic materials 热压钕铁硼永磁材料 |
China National Standards RE |
English PDF |
GB/T 34590.5-2017 |
Road vehicles—Functional safety—Part 5: Product development at the hardwaRE level 道路车辆 功能安全 第5部分:产品开发:硬件层面 |
China National Standards RE |
English PDF |
GB/T 34599-2017 |
Ramp control system application REquirements 匝道控制系统设置要求 |
China National Standards RE |
English PDF |
GB/T 34483-2017 |
β transus temperatuRE determination methods of zirconium and zirconium alloys 锆及锆合金β相转变温度测定方法 |
China National Standards RE |
English PDF |
GB/T 23615.1-2017 |
Thermal barrier materials for architectuRE aluminium alloy extruded profiles—Part 1:Polyamide profiles 铝合金建筑型材用隔热材料 第1部分:聚酰胺型材 |
China National Standards RE |
English PDF |
GB/T 5048-2017 |
MoistuRE-proof packaging 防潮包装 |
China National Standards RE |
English PDF |
GB/T 34339-2017 |
Ammonia injection and mixing system in coal-fiREd flue gas denitration system 燃煤烟气脱硝喷氨混合系统 |
China National Standards RE |
English PDF |
GB/T 34340-2017 |
Technical REquirements of operation performance assessment for coal-fired flue gas denitration installation 燃煤烟气脱硝装备运行效果评价技术要求 |
China National Standards RE |
English PDF |
GB/T 34500.3-2017 |
Chemical analysis methods for raRE earth waste residue and waste water—Part 3: Determination of weak radioactivity(total activity of αandβ) 稀土废渣、废水化学分析方法 第3部分:弱放射性(α和β总活度)的测定 |
China National Standards RE |
English PDF |
GB/T 14194-2017 |
Rules for filling of compREssed gas cylinders 压缩气体气瓶充装规定 |
China National Standards RE |
English PDF |
GB/T 34526-2017 |
Rules for filling of gas mixtuRE cylinder 混合气体气瓶充装规定 |
China National Standards RE |
English PDF |
GB/T 34527-2017 |
Specification of gas cylinder valve for air REbreather 空气呼吸器用气瓶阀技术条件 |
China National Standards RE |
English PDF |
GB/T 34528-2017 |
REgulation for filling of cylinder bundle 气瓶集束装置充装规定 |
China National Standards RE |
English PDF |
GB/T 9252-2017 |
Method for pREssure cycling test of gas cylinders 气瓶压力循环试验方法 |
China National Standards RE |
English PDF |
GB/T 21451.3-2017 |
Petroleum and liquid petroleum products—MeasuREment of level and temperture in storage tanks by automatic methods—Part 3:Measurement of level in pressurized tanks(non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第3部分:带压罐(非冷冻)中的液位测量 |
China National Standards RE |
English PDF |
GB/T 34533-2017 |
MeasuREment of helium porosity and pulse decay permeability of shale 页岩氦气法孔隙度和脉冲衰减法渗透率的测定 |
China National Standards RE |
English PDF |
GB/T 34534-2017 |
Coke—Determination of ash composition—X-ray fluoREscence spectrometric method 焦炭 灰成分含量的测定 X射线荧光光谱法 |
China National Standards RE |
English PDF |
GB/T 7631.18-2017 |
Lubricants,industrial oils and RElated products(class L)—Classification—Part 18:Family Y(Miscellaneous) 润滑剂、工业用油和有关产品(L类)的分类 第18部分:Y组(其他应用) |
China National Standards RE |
English PDF |
GB/T 21412.15-2017 |
Petroleum and natural gas industries—Design and operation of subsea production systems—Part15:Subsea structuREs and manifolds 石油天然气工业 水下生产系统的设计和操作 第15部分:水下结构物及管汇 |
China National Standards RE |
English PDF |
GB/T 11070-2017 |
REduced germanium ingot 还原锗锭 |
China National Standards RE |
English PDF |
GB/T 34375-2017 |
REliability assessment method of NC ship plate bending machine 数控船用卷板机可靠性评定方法 |
China National Standards RE |
English PDF |
GB/T 34376-2017 |
NC pREss brake—Specifications 数控板料折弯机 技术条件 |
China National Standards RE |
English PDF |
GB/T 34529-2017 |
Cranes and hoists—Selection of wiRE ropes,drums and sheaves 起重机和葫芦 钢丝绳、卷筒和滑轮的选择 |
China National Standards RE |
English PDF |
GB/T 34537-2017 |
Hydrogen and compREssed natural gas (HCNG) blended as vehicle fuel 车用压缩氢气天然气混合燃气 |
China National Standards RE |
English PDF |
GB/T 34535-2017 |
Lubricants, industrial oils and RElated products(Class L)—Family X(Grease)—Specification 润滑剂、工业用油和有关产品(L类) X组(润滑脂) 规范 |
China National Standards RE |
English PDF |
GB/T 21451.6-2017 |
Petroleum and liquid petroleum products—MeasuREment of level and temperature in storage tanks by automatic methods—Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第6部分:带压罐(非冷冻)中的温度测量 |
China National Standards RE |
English PDF |
GB/T 34538-2017 |
The high temperatuRE coal carbonization and product quantitative determination 高温炼焦试验及焦化产品产率评价方法 |
China National Standards RE |
English PDF |
GB/T 34500.1-2017 |
Chemical analysis methods for raRE earth residue and waste water—Part 1:Determination of fluorine content—Ion selective electrode analysis 稀土废渣、废水化学分析方法 第1部分:氟离子量的测定 离子选择电极法 |
China National Standards RE |
English PDF |
GB/T 34500.4-2017 |
Chemical analysis methods for raRE earth waste residue and waste water—Part 4: Determination of copper, zinc, lead, chromium, cadmium, barium, cobalt, manganese, nickel and titanium contents—Inductively coupled plasma emission spectrometry 稀土废渣、废水化学分析方法 第4部分:铜、锌、铅、铬、镉、 钡、钴、锰、镍、钛量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards RE |
English PDF |
GB/T 16484.13-2017 |
Chemical analysis methods for raRE earth chloride and light rare erath carbonate--Part 13: Determination of ammonium chloride content 氯化稀土、碳酸轻稀土化学分析方法 第13部分:氯化铵量的测定 |
China National Standards RE |
English PDF |
GB/T 34500.2-2017 |
Chemical analysis methods for raRE earth residue and waste water—Part 2:Determination of chemical oxygen demand(COD) 稀土废渣、废水化学分析方法 第2部分:化学需氧量(COD)的测定 |
China National Standards RE |
English PDF |
Find out:25312Items | To Page of: First -Previous-Next -Last | [70] [71] [72] [73] [74] [75] [76] |