China National Standards

China Size GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "Size" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 14799-2005 Geotextiles and geotextile-related products-Determination of the effective opening Size-Dry sieving method
    土工布及其有关产品 有效孔径的测定 干筛法
    China National Standards
    Size

    English PDF
    GB/T 3452.1-2005 Fluid power systems-O-rings-Part 1:Inside diameters,cross-sections,tolerances and Size identification code
    液压气动用O形橡胶密封圈 第1部分:尺寸系列及公差
    China National Standards
    Size

    English PDF
    GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle Size distribution
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
    China National Standards
    Size

    English PDF
    GB 11780-2005 The minimum mesh Size of the traw1 cod-end in South China Sea
    南海区拖网网囊最小网目尺寸
    China National Standards
    Size

    English PDF
    GB 11779-2005 The minimum mesh Size of the trawl cod-end in the East China Sea and Yellow Sea
    东海、黄海区拖网网囊 最小网目尺寸
    China National Standards
    Size

    English PDF
    GB/T 19628.2-2005 Industrial wire screens woven wire cloth-Guide to the choice of aperture Size and wire diameter combinations-Part 2:Preferred combination for woven wire cloth
    工业用金属丝 网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 金属丝编织网的优先组合选择
    China National Standards
    Size

    English PDF
    GB/T 19627-2005 Particle Size analysis-Photon correlation spectroscopy
    粒度分析--光子相关光谱法
    China National Standards
    Size

    English PDF
    GB/T 1047-2005 Pipework components-Definition and selection of DN (norminal Size)
    管道元件 DN(公称尺寸)的定义和选用
    China National Standards
    Size

    English PDF
    GB/T 19599.2-2004 Testing method for fishing nets of synthetic fibre--Size of netting
    合成纤维渔网片试验方法 网片尺寸
    China National Standards
    Size

    English PDF
    GB/T 13221-2004 Nanometer powder--Determination of particle Size distribution--Small angle X-ray scattering method
    纳米粉末粒度分布的测定 X射线小角散射法
    China National Standards
    Size

    English PDF
    GB/T 10322.7-2004 Iron ore--Determination of Size distribution by sieving
    铁矿石 粒度分布的筛分测定
    China National Standards
    Size

    English PDF
    GB/T 4267-2004 Rotating tools with parallel shanks--Diameters of shanks and Sizes of driving squares
    直柄回转工具 柄部直径和传动方头的尺寸
    China National Standards
    Size

    English PDF
    GB/T 6609.28-2004 Chemical analysis methods and determination of physical performance of alumina--Determination of the fine particle Size distribution(less than 60μm)--Method using electroformed sieves
    氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法
    China National Standards
    Size

    English PDF
    GB/T 10611-2003 Industrial screens--Designation and nominal Sizes of apertures
    工业用网 标记方法与网孔尺寸系列
    China National Standards
    Size

    English PDF
    GB/T 9185-2003 Photography--135-Size film and magazine--Specifications
    摄影师 135规格胶片和暗盒 规范
    China National Standards
    Size

    English PDF
    GB/T 6524-2003 Metallic powders--Determination of particle Size distribution by gravitational sedimentation in a liquid and attenuation measurement
    金属粉末 粒度分布的测量 重力沉降光透法
    China National Standards
    Size

    English PDF
    GB/T 9146-2003 General purpose metric screw threads--Limits of Sizes for the screw threads of coarse quality and preferable plan
    普通螺纹 粗糙精度、优选系列的极限尺寸
    China National Standards
    Size

    English PDF
    GB/T 9145-2003 General purpose metric screw threads--Limits of Sizes for the screw threads of medium quality and preferable plan
    普通螺纹 中等精度、优选系列的极限尺寸
    China National Standards
    Size

    English PDF
    GB/T 4458.5-2003 Mechanical drawings--Indication of tolerances for Size and of fits
    机械制图 尺寸公差与配合注法
    China National Standards
    Size

    English PDF
    GB/T 18780.2-2003 Geometrical Product Specifications(GPS)--Geometrical features--Part 2: Extracted median line of a cylinder and a cone,extracted median surface,local Size of an extracted feature
    产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸
    China National Standards
    Size

    English PDF
    GB/T 1803-2003 Limits and fits--Tolerance zones for holes and shafts Size up to 18mm
    极限与配合 尺寸至18 mm孔、轴公差带
    China National Standards
    Size

    English PDF
    GB/T 6394-2002 Metal-methids for estimating the average grain Size
    金属平均晶粒度测定法
    China National Standards
    Size

    English PDF
    GB/T 14634.4-2002 Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of particle Size distribution by electric sensing zone technique
    灯用稀土三基色荧光粉试验方法 电传感法粒度分布测定
    China National Standards
    Size

    English PDF
    GB/T 451.1-2002 Paper and board--Determination of Size and deviation
    纸和纸板尺寸及偏斜度的测定
    China National Standards
    Size

    English PDF
    GB/T 18491.1-2001 Information technology--Software measurement--Functional Size measurement--Part 1:Definition of concepts
    信息技术 软件测量 功能规模测量 第1部分:概念定义
    China National Standards
    Size

    English PDF
    GB/T 5758-2001 Determination for particle Size range,effective size and uniformity coefficient of ion exchange resins
    离子交换树脂粒度、有效粒径和均一系数的测定
    China National Standards
    Size

    English PDF
    GB/T 18230.7-2000 Hexagon nuts forstructural bolting,style 2,hot-dip galvanized(overSize tapped)--Product grade A--Property class 9
    栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸)A级 9级
    China National Standards
    Size

    English PDF
    GB/T 18230.6-2000 Hexagon nuts for structural bolting,style 1,hot-dip galvanized (overSize tapped)--Product grades A and B--Property classes 5,6 and 8
    栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级
    China National Standards
    Size

    English PDF
    GB/T 9258.3-2000 Coatedabrasives--Grain Size analysis--Part 3:Determination of grain size distributionof microgrits P240 to P2500
    涂附磨具用磨料 粒度分析 第3部分:微粉P240~P2500粒度组成的测定
    China National Standards
    Size

    English PDF
    GB/T 9258.1-2000 Coated abrasives--Grain Size analysis--Part 1:Grain size distribution test
    涂附磨具用磨料 粒度分析 第1部分:粒度组成
    China National Standards
    Size

    English PDF
    GB/T 788-1999 Formats and their Sizes of books and magazines
    图书和杂志开本及其幅面尺寸
    China National Standards
    Size

    English PDF
    GB/T 12496.2-1999 Test methods of wooden activated carbon--Determination of particle Size distribution
    木质活性炭试验方法 粒度的测定
    China National Standards
    Size

    English PDF
    GB/T 3301-1999 Standard method for measurement of volume,rim diameter allowance, hight allowance, weight allowance and Size of defects of domestic ceramic ware
    日用陶瓷的容积、口径误差、高度误差、重量误差、缺陷尺寸的测定方法
    China National Standards
    Size

    English PDF
    GB/T 17634-1998 Geotextiles and geotextile-related products--Determination of the characteristic opening Size--Wet sievingmethod
    土工布及其有关产品 有效孔径的测定 湿筛法
    China National Standards
    Size

    English PDF
    GB/T 2481.1-1998 Bonded abrasives--Determination and designation of grain Size distribution--Part 1:Macrogrits F4 to F220
    固结磨具用磨料 粒度组成的检测和标记 第1部分:粗磨粒 F4~F220
    China National Standards
    Size

    English PDF
    GB/T 2837-1998 Measuring method for Size and deviation of vitrified clay pipe
    陶管尺寸及偏差测量方法
    China National Standards
    Size

    English PDF
    GB/T 3294-1998 Method of inspection for last Sizes
    鞋楦尺寸检测方法
    China National Standards
    Size

    English PDF
    GB/T 3293.1-1998 Shoe Sizes
    鞋号
    China National Standards
    Size

    English PDF
    GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle Size
    煤质颗粒活性炭试验方法 粒度的测定
    China National Standards
    Size

    English PDF
    GB/T 5900.3-1997 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3:Bayonet type
    机床 主轴端部与花盘 互换性尺寸 第3部分:卡口型
    China National Standards
    Size

    English PDF
    GB/T 5900.2-1997 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2:Camlock type
    机床 主轴端部与花盘 互换性尺寸 第2部分:凸轮锁紧型
    China National Standards
    Size

    English PDF
    GB/T 148-1997 Writing paper and certain classes of printed matter--Trimmed Sizes--A and B series
    印刷、书写和绘图纸幅面尺寸
    China National Standards
    Size

    English PDF
    GB/T 147-1997 Writing paper and certain classes printed matter--Untrimmed Sizes
    印刷、书写和绘图用原纸尺寸
    China National Standards
    Size

    English PDF
    GB/T 16880-1997 Guidelines for photomask defect classification and Size definition
    光掩模缺陷分类和尺寸定义的准则
    China National Standards
    Size

    English PDF
    GB/T 3328-1997 Furniture--Main Sizes of beds
    家具 床类主要尺寸
    China National Standards
    Size

    English PDF
    GB/T 3327-1997 Furniture--Main Sizes of cabinets
    家具 柜类主要尺寸
    China National Standards
    Size

    English PDF
    GB/T 3326-1997 Furniture--Main Sizes of tables and seats
    家具 桌、椅、凳类主要尺寸
    China National Standards
    Size

    English PDF
    GB/T 6406-1996 Super abrasive--Grain Sizes of diamond or cubic boron nitride
    超硬磨料 金刚石或立方氮化硼颗粒尺寸
    China National Standards
    Size

    English PDF
    GB/T 16144-1995 Annual limits on intakes for radioactive aerosol with different particle Size
    不同粒度放射性气溶胶年摄入量限值
    China National Standards
    Size

    English PDF
    GB/T 15467-1995 Graphic technology--Sheet-fed printing machines--Range of Sizes
    印刷技术 单张纸印刷机 尺寸系列
    China National Standards
    Size

    English PDF
    GB/T 2005-1994 Coke for metallurgy--Determination of coke breeze content and Size consist
    冶金焦炭的焦末含量及筛分组成的测定方法
    China National Standards
    Size

    English PDF
    GB/T 15057.11-1994 Limestone for chemical industry--Determination of Size
    化工用石灰石粒度的测定
    China National Standards
    Size

    English PDF
    GB/T 15054.5-1994 Miniature screw threads--Limits of Sizes
    小螺纹 极限尺寸
    China National Standards
    Size

    English PDF
    GB/T 13918-1992 Sizes of format paper used by office machine in non-continuous forms
    办公机器用非连续格式纸尺寸系列
    China National Standards
    Size

    English PDF
    GB/T 13723-1992 Generic specification for medium Size computer
    中型数字电子计算机通用技术条件
    China National Standards
    Size

    English PDF
    GB/T 13247-1991 Ferroalloys--Sampling and testing methods for determination of grain Size
    铁合金产品粒度的取样和检测方法
    China National Standards
    Size

    English PDF
    GB/T 13220-1991 Determination of particle Size distribution of fine powder--Method of sieve classfication with sonic wave
    细粉末粒度分布的测定 声波筛分法
    China National Standards
    Size

    English PDF
    GB/T 12811-1991 Test method for average cell Size of rigid cellular plastics
    硬质泡沫塑料平均泡孔尺寸试验方法
    China National Standards
    Size

    English PDF
    GB/T 12005.7-1989 Determination of particle Size of powder polyacry-lamide
    粉状聚丙烯酰胺粒度测定方法
    China National Standards
    Size

    English PDF
    GB/T 11107-1989 Metallic and its compound powder--Determination of specific surface and particle Size by air permeating method
    金属及其化合物粉末 比表面积和粒度测定 空气透过法
    China National Standards
    Size

    English PDF
    GB/T 2007.7-1987 General rules for the sampling and sample preparation of minerals in bulk--The method for determination of Size by manual sieving
    散装矿产品取样、制样通则 粒度测定方法 手工筛分法
    China National Standards
    Size

    English PDF
    GB/T 7393-1987 Basic Size of outlet of cable distribution systems intended for sound and television signals
    声音和电视信号的电缆分配系统输出口基本尺寸
    China National Standards
    Size

    English PDF
    GB/T 6288-1986 Determination of particle Size for granular molecular sieve
    粒状分子筛粒度测定方法
    China National Standards
    Size

    English PDF
    GB/T 4873-1985 Continuous forms used for information processing--Sizes and feed holes
    信息处理用连续格式纸 尺寸和输送孔
    China National Standards
    Size

    English PDF
    GB/T 4197-1984 Method for measuring the average grain Size of sintered bar and rod of tungsten molybdenum and alloys
    钨钼及其合金的烧结坯条、棒材晶粒度测试方法
    China National Standards
    Size

    English PDF
    GB/T 4195-1984 Method for measuring the distribution of the powder Size of tungsten and molybdenum method by the balance for the fall of the particles
    钨、钼粉末粒度分布测试方法(沉降天平法)
    China National Standards
    Size

    English PDF

    Find out:366Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards