GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 20234.1-2015 |
ConnecTIon set of conductive charging for electric vehicles—Part 1: General requirements 电动汽车传导充电用连接装置 第1部分:通用要求 |
China National Standards TI |
English PDF |
GB/T 18487.1-2015 |
Electric vehicle conducTIve charging system—Part 1: General requirements 电动汽车传导充电系统 第1部分:通用要求 |
China National Standards TI |
English PDF |
GB/T 20013.3-2015 |
Nuclear medicine instrumentaTIon—Routine tests—Part 3: Positron emission tomographs 核医学仪器 例行试验 第3部分:正电子发射断层成像装置 |
China National Standards TI |
English PDF |
GB/T 18279.2-2015 |
SterilizaTIon of health care products—Ethylene oxide—Part 2: Guidance on the application of GB 18279.1 医疗保健产品的灭菌 环氧乙烷 第2部分:GB 18279.1应用指南 |
China National Standards TI |
English PDF |
GB 9706.16-2015 |
Medical electrical equipment—Part 2: ParTIcular requirements for the safety of radiotherapy simulators 医用电气设备 第2部分:放射治疗模拟机安全专用要求 |
China National Standards TI |
English PDF |
GB 16174.2-2015 |
Implants for surgery—AcTIve implantable medical devices—Part 2: Cardiac pacemakers 手术植入物 有源植入式医疗器械 第2部分:心脏起搏器 |
China National Standards TI |
English PDF |
GB 16174.1-2015 |
Implants for surgery—AcTIve implantable medical devices—Part 1: General requirements for safety, marking and for information to be provided by the manufacturer 手术植入物 有源植入式医疗器械 第1部分:安全、标记和制造商所提供信息的通用要求 |
China National Standards TI |
English PDF |
GB/T 16886.6-2015 |
Biological evaluaTIon of medical devices—Part 6: Tests for local effects after implantation 医疗器械生物学评价 第6部分:植入后局部反应试验 |
China National Standards TI |
English PDF |
GB/T 5276-2015 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descripTIons of dimensions 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注 |
China National Standards TI |
English PDF |
GB/T 32287-2015 |
Methods of determinaTIon and calculation of heat balance for hot blast stove in blast furnace 高炉热风炉热平衡测定与计算方法 |
China National Standards TI |
English PDF |
GB/T 32279-2015 |
SpecificaTIon for order entry format of silicon wafers 硅片订货单格式输入规范 |
China National Standards TI |
English PDF |
GB/T 32277-2015 |
Test method for instrumental neutron acTIvation analysis (INAA) of silicon 硅的仪器中子活化分析测试方法 |
China National Standards TI |
English PDF |
GB/T 32269-2015 |
Nanotechnologies—Terminology and definiTIons for nano-objects—Nanoparticle, nanofibre and nanoplate 纳米科技 纳米物体的术语和定义 纳米颗粒、纳米纤维和纳米片 |
China National Standards TI |
English PDF |
GB/T 32267-2015 |
Terminology of performance tesTIng for analytical instrument 分析仪器性能测定术语 |
China National Standards TI |
English PDF |
GB/T 32266-2015 |
Method of performance tesTIng for atomic fluorescence spectrometer 原子荧光光谱仪性能测定方法 |
China National Standards TI |
English PDF |
GB/T 32264-2015 |
Method of performance tesTIng for gas chromatography-single quadrupole mass pectrometry 气相色谱-单四极质谱仪性能测定方法 |
China National Standards TI |
English PDF |
GB/T 32262-2015 |
PreparaTIon of deoxyribonucleic acid sample for atomic force microscope measurement 用于原子力显微镜检测的脱氧核糖核酸样品的制备方法 |
China National Standards TI |
English PDF |
GB/T 32221-2015 |
Vacuum technology—Vacuum thermal environmental simulaTIon test equipment of spacecraft—General specification 真空技术 航天器用真空热环境模拟试验设备 通用技术条件 |
China National Standards TI |
English PDF |
GB/T 32217-2015 |
Hydraulic fluid power—Sealing devices—Standard test methods to assess the performance of seals used in oil hydraulic reciprocaTIng applications 液压传动 密封装置 评定液压往复运动密封件性能的试验方法 |
China National Standards TI |
English PDF |
GB/T 32216-2015 |
Hydraulic fluid power—Test method for the proporTIonal/servo controlled hydraulic cylinder 液压传动 比例/伺服控制液压缸的试验方法 |
China National Standards TI |
English PDF |
GB/T 32179-2015 |
Chemical analysis of refractories—General requirements for wet chemical analysis, atomic absorpTIon spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods 耐火材料化学分析 湿法、原子吸收光谱法(AAS)和电感耦合等离子体原子发射光谱法(ICP-AES)的一般要求 |
China National Standards TI |
English PDF |
GB/T 32178-2015 |
Refractory products and materials—Spectrometric determinaTIon of chromium (Ⅵ)in chrome refractories 分光法测定 含铬耐火材料中六价铬分析方法 |
China National Standards TI |
English PDF |
GB/T 32177-2015 |
DeterminaTIon of boron oxide in refractory materials 耐火材料中B2O3的测定 |
China National Standards TI |
English PDF |
GB/T 3098.2-2015 |
Mechanical properTIes of fasteners—Nuts 紧固件机械性能 螺母 |
China National Standards TI |
English PDF |
GB/T 2998-2015 |
Test method for bulk density and true porosity of shaped insulaTIng refractory products 定形隔热耐火制品体积密度和真气孔率试验方法 |
China National Standards TI |
English PDF |
GB/T 25753.4-2015 |
Vacuum technology—Roots vacuum pump— Measurement of performance characterisTIcs—Part 4: Measurement of noise 真空技术 罗茨真空泵性能测量方法 第4部分:噪声的测量 |
China National Standards TI |
English PDF |
GB/T 24578-2015 |
Test method for measuring surface metal contaminaTIon on silicon wafers by total reflection X-Ray fluorescence spectroscopy 硅片表面金属沾污的全反射X光荧光光谱测试方法 |
China National Standards TI |
English PDF |
GB/T 1962.1-2015 |
Conical fitTIngs with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirement 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求 |
China National Standards TI |
English PDF |
GB/T 16886.7-2015 |
Biological evaluaTIon of medical devices—Part 7: Ethylene oxide sterilization residuals 医疗器械生物学评价 第7部分:环氧乙烷灭菌残留量 |
China National Standards TI |
English PDF |
GB/T 16886.20-2015 |
Biological evaluaTIon of medical devices—Part 20: Principles and methods for immunotoxicology testing of medical devices 医疗器械生物学评价 第20部分:医疗器械免疫毒理学试验原则和方法 |
China National Standards TI |
English PDF |
GB/T 13871.5-2015 |
Rotary shaft lip-type seals incorporaTIng elastomeric sealing elements—Part 5: Identification of visual imperfections 密封元件为弹性体材料的旋转轴唇形密封圈 第5部分: 外观缺陷的识别 |
China National Standards TI |
English PDF |
GB/T 13871.2-2015 |
Rotary shaft lip-type seals incorporaTIng elastomerice sealing elements—Part 2: Vocabulary 密封元件为弹性体材料的旋转轴唇形密封圈 第2部分:词汇 |
China National Standards TI |
English PDF |
GB 32276-2015 |
Safety regulaTIons for dust explosion protection in textile industry 纺织工业粉尘防爆安全规程 |
China National Standards TI |
English PDF |
GB 32275-2015 |
Technical specificaTIons of pipeline safety apparatus for fire dampers and explosion protection in textile industry 纺织工业防火防爆管道安全装置技术规范 |
China National Standards TI |
English PDF |
GB 26920.2-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigeraTIng appliances—Part 2: Commercial refrigerated cabinets with self-contained condensing unit 商用制冷器具能效限定值和能效等级 第2部分:自携冷凝机组商用冷柜 |
China National Standards TI |
English PDF |
GB 18282.5-2015 |
SterilizaTIon of health care products—Chemical indicators—Part 5:Class 2 indicators for Bowie and Dick-type air removal tests 医疗保健产品灭菌 化学指示物 第5部分:用于BD类空气排除测试的二类指示物 |
China National Standards TI |
English PDF |
GB 18282.1-2015 |
SterilizaTIon of health care products—Chemical indicator—Part 1: General requirements 医疗保健产品灭菌 化学指示物 第1部分:通则 |
China National Standards TI |
English PDF |
GB 18281.5-2015 |
SterilizaTIon of health care products—Biological indicator—Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes 医疗保健产品灭菌 生物指示物 第5部分:低温蒸汽甲醛灭菌用生物指示物 |
China National Standards TI |
English PDF |
GB 18281.4-2015 |
SterilizaTIon of health care products—Biological indicators—Part 4: Biological indicators for dry heat sterilization processes 医疗保健产品灭菌 生物指示物 第4部分:干热灭菌用生物指示物 |
China National Standards TI |
English PDF |
GB 18281.3-2015 |
SterilizaTIon of health care products—Biological indicators—Part 3: Biological indicators for moist heat sterilization processes 医疗保健产品灭菌 生物指示物 第3部分:湿热灭菌用生物指示物 |
China National Standards TI |
English PDF |
GB 18281.2-2015 |
SterilizaTIon of health care products—Biological indicators—Part 2: Biological indicators for ethylene oxide sterilization processes 医疗保健产品灭菌 生物指示物 第2部分:环氧乙烷灭菌用生物指示物 |
China National Standards TI |
English PDF |
GB 18281.1-2015 |
SterilizaTIon of health care products—Biological indicators—Part 1: General requirements 医疗保健产品灭菌 生物指示物 第1部分:通则 |
China National Standards TI |
English PDF |
GB 18279.1-2015 |
SterilizaTIon of health care products—Ethylene oxide—Part 1: Requirements for development,validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 环氧乙烷 第1部分:医疗器械灭菌过程的开发、确认和常规控制的要求 |
China National Standards TI |
English PDF |
GB 18278.1-2015 |
SterilizaTIon of health care products—Moist heat—Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 湿热 第1部分:医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards TI |
English PDF |
GB/T 8650-2015 |
EvaluaTIon of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards TI |
English PDF |
GB/T 7734-2015 |
Method for ultrasonic tesTIng of clad steel plates 复合钢板超声检测方法 |
China National Standards TI |
English PDF |
GB/T 32286.1-2015 |
Soft magneTIc alloys—Part 1:Nickel-iron alloys 软磁合金 第1部分:铁镍合金 |
China National Standards TI |
English PDF |
GB/T 32282-2015 |
Test method for disoclaTIon density of GaN single crystal—Cathodoluminescence spectroscopy 氮化镓单晶位错密度的测量 阴极荧光显微镜法 |
China National Standards TI |
English PDF |
GB/T 32185-2015 |
TItanium alloy large-sized bars 钛合金大规格棒材 |
China National Standards TI |
English PDF |
GB/T 32183-2015 |
Aluminium strips for computer-to-prinTIng plates 计算机直接排版印刷版基用铝带材 |
China National Standards TI |
English PDF |
GB/T 32182-2015 |
Aluminium and aluminium alloy plates and sheets for railway applicaTIon 轨道交通用铝及铝合金板材 |
China National Standards TI |
English PDF |
GB/T 32181-2015 |
Aluminium alloy welding wires for railway applicaTIon 轨道交通焊接用铝合金线材 |
China National Standards TI |
English PDF |
GB/T 32166.2-2015 |
Personal protecTIve equipment—Eye and face protection—Occupational eye and face protectors—Part 2: Test methods 个体防护装备 眼面部防护 职业眼面部防护具 第2部分:测量方法 |
China National Standards TI |
English PDF |
GB/T 20564.8-2015 |
ConTInuously cold rolled high strength steel sheet and strip for automobile—Part 8: Complex phase steel 汽车用高强度冷连轧钢板及钢带 第8部分:复相钢 |
China National Standards TI |
English PDF |
GB/T 32310-2015 |
SterilizaTIon of health care products—Chemical indicators—Guidance for selection,use and interpretion of results 医疗保健产品灭菌 化学指示物 选择、使用和结果判断指南 |
China National Standards TI |
English PDF |
GB/T 19973.1-2015 |
SterilizaTIon of medical devices—Microbiological methods—Part 1: Determination of a population of microorganisms on products 医疗器械的灭菌 微生物学方法 第1部分:产品上微生物总数的测定 |
China National Standards TI |
English PDF |
GB/T 19971-2015 |
SterilizaTIon of health care products—Vocabulary 医疗保健产品灭菌 术语 |
China National Standards TI |
English PDF |
GB/T 19633.2-2015 |
Packaging for terminally sterilized medical devices—Part 2: ValidaTIon requirements for forming, sealing and assembly processes 最终灭菌医疗器械包装 第2部分:成形、密封和装配过程的确认的要求 |
China National Standards TI |
English PDF |
GB/T 17006.11-2015 |
EvaluaTIon and routine testing in medical imaging departments—Part 2-6: Constancy tests—Imaging performance of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第2-6部分:X射线计算机体层摄影设备成像性能稳定性试验 |
China National Standards TI |
English PDF |
GB/T 14232.2-2015 |
PlasTIcs collapsible containers for human blood and blood components—Part 2: Blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第2部分:用于标签和使用说明书的图形符号 |
China National Standards TI |
English PDF |
GB/T 32214.2-2015 |
InformaTIon technology—Generic applications of ASN.1—Part 2: Fast web services 信息技术 ASN.1的一般应用 第2部分:快速Web服务 |
China National Standards TI |
English PDF |
GB/T 32213-2015 |
InformaTIon security technology—Public key infrastructure—Specifications for remote password authentication and key establishment 信息安全技术 公钥基础设施 远程口令鉴别与密钥建立规范 |
China National Standards TI |
English PDF |
GB/T 31567-2015 |
RegeneraTIve, enamelled and packed panels for air-gas and gas-gas heat exchangers 用于空气-烟气、烟气-烟气再生式热交换器的搪瓷换热元件 |
China National Standards TI |
English PDF |
GB/T 30269.401-2015 |
InformaTIon technology—Sensor networks—Part 401: Collaborative information processing: Services and interfaces supporting collaborative information processing 信息技术 传感器网络 第401部分:协同信息处理:支撑协同信息处理的服务及接口 |
China National Standards TI |
English PDF |
GB/T 30269.1-2015 |
InformaTIon technology—Sensor networks—Part 1:Reference architecture and general technical requirements 信息技术 传感器网络 第1部分:参考体系结构和通用技术要求 |
China National Standards TI |
English PDF |
GB/T 20090.12-2015 |
InformaTIon technology—Advanced coding of audio and video—Part 12: Synthetic scene 信息技术 先进音视频编码 第12部分:综合场景 |
China National Standards TI |
English PDF |
GB/T 20090.11-2015 |
InformaTIon technology—Advanced coding of audio and video—Part 11: Synchronous text 信息技术 先进音视频编码 第11部分:同步文本 |
China National Standards TI |
English PDF |
GB/T 17969.1-2015 |
InformaTIon technology—Open systems interconnection—Procedures for the operation of OSI registration authorities—Part 1: General procedures and top arcs of the International Object Identifier tree 信息技术 开放系统互连 OSI登记机构的操作规程 第1部分:一般规程和国际对象标识符树的顶级弧 |
China National Standards TI |
English PDF |
GB/T 16263.5-2015 |
InformaTIon technology—ASN.1 Encoding rules—Part 5: Mapping W3C XML schema definitions into ASN.1 信息技术 ASN.1编码规则 第5部分:W3C XML模式定义到ASN.1的映射 |
China National Standards TI |
English PDF |
GB/T 16263.4-2015 |
InformaTIon technology—ASN.1 encoding rules—Part 4: XML Encoding Rules(XER) 信息技术 ASN.1编码规则 第4部分:XML编码规则(XER) |
China National Standards TI |
English PDF |
GB/Z 32235-2015 |
Industrial-process measurement, control and automaTIon—Reference model for representation of production facilities (digital factory) 工业过程测量、控制和自动化 生产设施表示用参考模型(数字工厂) |
China National Standards TI |
English PDF |
GB/T 9445-2015 |
Non-destrucTIve testing—Qualification and certification of NDT personnel 无损检测 人员资格鉴定与认证 |
China National Standards TI |
English PDF |
GB/T 8243.13-2015 |
Methods of test for full-flow lubricaTIng oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验 |
China National Standards TI |
English PDF |
GB/T 8129-2015 |
Industrial automaTIon systems—Numerical control of machines—Vocabulary 工业自动化系统 机床数值控制 词汇 |
China National Standards TI |
English PDF |
GB/T 7926-2015 |
NC reciprocaTIng traveling type wire electrical-discharge machines—Testing of the accuracy 数控往复走丝电火花线切割机床 精度检验 |
China National Standards TI |
English PDF |
GB/T 4513.1-2015 |
Monolithic (unshaped) refractory products—Part 1: IntroducTIon and classification 不定形耐火材料 第1部分:介绍和分类 |
China National Standards TI |
English PDF |
GB/T 3850-2015 |
Impermeable sintered metal materials and hardmetals—DeterminaTIon of density 致密烧结金属材料与硬质合金 密度测定方法 |
China National Standards TI |
English PDF |
GB/T 3821-2015 |
Small and medium power internal combusTIon engines—Cleanliness limits and measurements 中小功率内燃机 清洁度限值和测定方法 |
China National Standards TI |
English PDF |
GB/T 3489-2015 |
Hardmetals—Metallographic determinaTIon of porosity and uncombined carbon 硬质合金 孔隙度和非化合碳的金相测定 |
China National Standards TI |
English PDF |
GB/T 32291-2015 |
Offline inspecTIon and evaluation of high and super-high pressure safety valves 高压超高压安全阀离线校验与评定 |
China National Standards TI |
English PDF |
GB/T 32274-2015 |
Building construcTIon machinery and equipment —Pedestrian-controlled vibratory (percussion) rammers—Terminology and commercial specifications 建筑施工机械与设备 手扶随行式振动冲击夯 术语和商业规格 |
China National Standards TI |
English PDF |
GB/T 32273-2015 |
Building construcTIon machinery and equipment—Pedestrian-controlled vibratory plates—Terminology and commercial specifications 建筑施工机械与设备 手扶随行式振动平板夯 术语和商业规格 |
China National Standards TI |
English PDF |
GB/T 32272.1-2015 |
Powered industrial trucks—Test methods for verificaTIon of visibility—Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10t capacity 机动工业车辆 验证视野的试验方法 第1部分:起重量不大于10t的坐驾式、站驾式车辆和伸缩臂式叉车 |
China National Standards TI |
English PDF |
GB/T 32268-2015 |
Method of performance tesTIng for octadecyl bonded(C18) high performance liquid chromatography(HPLC) column 十八烷基键合相(C18)高效液相色谱柱性能测定方法 |
China National Standards TI |
English PDF |
GB/T 32265.1-2015 |
Ease of operaTIon of everyday products—Part 1:Design requirements for context of use and user characteristics 日用产品的易操作性 第1部分:针对使用情境和用户特征的设计要求 |
China National Standards TI |
English PDF |
GB/T 32261.2-2015 |
Usability of consumer products and products for public use—Part 2: SummaTIve test method 消费类产品和公用类产品的可用性 第2部分:总结性测试方法 |
China National Standards TI |
English PDF |
GB/T 32260.3-2015 |
DestrucTIve tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 3: Externally load tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第3部分:外载荷试验 |
China National Standards TI |
English PDF |
GB/T 32260.2-2015 |
DestrucTIve tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 2: Self-restraint tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第2部分:自拘束试验 |
China National Standards TI |
English PDF |
GB/T 32260.1-2015 |
DestrucTIve tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 1: General 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第1部分:总则 |
China National Standards TI |
English PDF |
GB/T 32259-2015 |
Non-destrucTIve testing of welds—Visual testing of fusion-welded joints 焊缝无损检测 熔焊接头目视检测 |
China National Standards TI |
English PDF |
GB/T 32258-2015 |
Steel cross wedge rollings—General specificaTIon 钢质楔横轧件 通用技术条件 |
China National Standards TI |
English PDF |
GB/T 32257-2015 |
QualificaTIon testing of welders for fusion welding on nickel and nickel alloys 镍及镍合金熔化焊焊工技能评定 |
China National Standards TI |
English PDF |
GB/T 32256-2015 |
Steel forgings for rings for reducTIon gears—General specification 钢质减速齿环锻件 通用技术条件 |
China National Standards TI |
English PDF |
GB/T 32255-2015 |
General martensiTIc stainless steel and alloy steel castings suitable for high temperature and high pressure service 高温承压马氏体不锈钢和合金钢通用铸件 |
China National Standards TI |
English PDF |
GB/T 32254-2015 |
Precision hot forging of straight bevel gear—General specificaTIons 直齿锥齿轮精密热锻件 通用技术条件 |
China National Standards TI |
English PDF |
GB/T 32253-2015 |
Precision hot forging of straight bevel gear—Structural design specificaTIon 直齿锥齿轮精密热锻件 结构设计规范 |
China National Standards TI |
English PDF |
GB/T 32252-2015 |
Investment casTIng process—General technology guidelines 熔模铸造工艺 通用技术导则 |
China National Standards TI |
English PDF |
GB/T 32251-2015 |
Investment casTIng process—Pollutants control 熔模铸造工艺 污染物的控制 |
China National Standards TI |
English PDF |
GB/T 32250.3-2015 |
InspecTIon of sprayers in use—Part 3: Air-assisted sprayers for bush and tree crops 在用喷雾机的检测 第3部分:灌木与乔木作物用风送式喷雾机 |
China National Standards TI |
English PDF |
GB/T 32250.2-2015 |
InspecTIon of sprayers in use—Part 2: Field crop sprayers 在用喷雾机的检测 第2部分:大田作物喷雾机 |
China National Standards TI |
English PDF |
Find out:39883Items | To Page of: First -Previous-Next -Last | [154] [155] [156] [157] [158] [159] [160] |