GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19608.1-2004 |
ClassificaTIon of specific environmental condition--Part 1:Dry heat 特殊环境条件分级 第1部分:干热 |
China National Standards TI |
English PDF |
GB/T 19607-2004 |
ProtecTIon types of specific environmental condition and their symbols 特殊环境条件防护类型及代号 |
China National Standards TI |
English PDF |
GB 16895.22-2004 |
Electrical instal laTIons of buildings--Part 5-53:Selection and erection of electrical equipment isolation,switching and control--Section 534:Devices for protection against overvoltages 建筑物电气装置 第5-53部分:电气设备的选择和安装-隔离、开关和控制设备 第534节:过电压保护电器 |
China National Standards TI |
English PDF |
GB/T 7725-2004 |
Room air condiTIoners 房间空气调节器 |
China National Standards TI |
English PDF |
GB/T 19603-2004 |
Test method for drop-proof properTIes ofdrop-proof plastic films 塑料无滴薄膜无滴性能试验方法 |
China National Standards TI |
English PDF |
GB/T 7235-2004 |
Geometrical Product SpecificaTIons(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius 产品几何量技术规范(GPS) 评定圆度误差的方法 半径变化量测量 |
China National Standards TI |
English PDF |
GB/T 7234-2004 |
Geometrical Product SpecificaTIons(GPS)--Measurement of roundness--Terms,definitions and parameters of roundness 产品几何量技术规范(GPS) 圆度测量 术语、定义及参数 |
China National Standards TI |
English PDF |
GB/T 7220-2004 |
Geometrical Product SpecificaTIons(GPS)--Surface texture:Profile method--Surfaceroughness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构 轮廓法 表面粗糙度 术语 参数测量 |
China National Standards TI |
English PDF |
GB/T 5847-2004 |
Dimensional chain--Methods of calculaTIon 尺寸链 计算方法 |
China National Standards TI |
English PDF |
GB/T 5371-2004 |
Limits and fits--The calculaTIon and selection of interference fits 极限与配合 过盈配合的计算和选用 |
China National Standards TI |
English PDF |
GB/T 19600-2004 |
Geometrical Product SpecificaTIons(GPS)--Surface texture:Profile method--Calibrationof contact(stylus)instruments 产品几何量技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的校准 |
China National Standards TI |
English PDF |
GB/T 1958-2004 |
Geometrical Product SpecificaTIons(GPS)--Geometrical tolerance--Verification prescription 产品几何量技术规范(GPS) 形状和位置公差 检测规定 |
China National Standards TI |
English PDF |
GB/T 19067.2-2004 |
Geometrical Product SpecificaTIons(GPS)--Surface texture:Profile method--Measurement standards--Part 2:Software measurement standards 产品几何量技术规范(GPS) 表面结构 轮廓法测量标准 第2部分:软件测量标准 |
China National Standards TI |
English PDF |
GB/T 18779.2-2004 |
Geometrical Product SpecificaTIons(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南 |
China National Standards TI |
English PDF |
GB/T 16857.5-2004 |
Geometrical Product SpecificaTIons(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机 |
China National Standards TI |
English PDF |
GB/T 6965-2004 |
TesTIng basic terms of materials for fishing gear--Pretension 渔具材料试验基本条件 预加张力 |
China National Standards TI |
English PDF |
GB/T 3939.2-2004 |
Nomenclature and signs of main fishing gear material--NetTIng 主要渔具材料命名与标记 网片 |
China National Standards TI |
English PDF |
GB/T 3939.1-2004 |
Nomenclature and signs of main fishing gear material--NetTIng twine 主要渔具材料命名与标记 网线 |
China National Standards TI |
English PDF |
GB/T 19599.2-2004 |
TesTIng method for fishing nets of synthetic fibre--Size of netting 合成纤维渔网片试验方法 网片尺寸 |
China National Standards TI |
English PDF |
GB/T 19599.1-2004 |
TesTIng method for fishing nets of synthetic fibre--Weight of netting 合成纤维渔网片试验方法 网片重量 |
China National Standards TI |
English PDF |
GB/T 19597-2004 |
Safety requirements for decommissioning of nuclear faciliTIes 核设施退役安全要求 |
China National Standards TI |
English PDF |
GB 11806-2004 |
RegulaTIons for the safe transport of radioactive material 放射性物质安全运输规程 |
China National Standards TI |
English PDF |
GB 19593-2004 |
Fireworks and firecracker--CombinaTIon fireworks 烟花爆竹 组合烟花 |
China National Standards TI |
English PDF |
GB 19592-2004 |
Detergent addiTIve for vehicular gasoline 车用汽油清净剂 |
China National Standards TI |
English PDF |
GB 50348-2004 |
technical code for engineering of security and protecTIon system 安全防范工程技术规范 |
China National Standards TI |
English PDF |
GB/T 19591-2004 |
Nano-TItanium dioxide 纳米二氧化钛 |
China National Standards TI |
English PDF |
GB/T 19587-2004 |
DeterminaTIon of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards TI |
English PDF |
GB/T 13221-2004 |
Nanometer powder--DeterminaTIon of particle size distribution--Small angle X-ray scattering method 纳米粉末粒度分布的测定 X射线小角散射法 |
China National Standards TI |
English PDF |
GB 15760-2004 |
Metal-cutTIng machine tools--General safeguarding specification 金属切削机床 安全防护通用技术条件 |
China National Standards TI |
English PDF |
GB/T 18240.4-2004 |
Fiscal cash register--Part 4:SpecificaTIon of device with EFT function 税控收款机 第4部分:银行卡受理设备规范 |
China National Standards TI |
English PDF |
GB/T 19581-2004 |
InformaTIon technology--Data interface of accounting software 信息技术 会计核算软件数据接口 |
China National Standards TI |
English PDF |
GB/T 19583-2004 |
ClassificaTIon and code for transactions of foreign-related payments 涉外收支交易分类与代码 |
China National Standards TI |
English PDF |
GB 50347-2004 |
Code of design for powder exTInguishing systems 干粉灭火系统设计规范 |
China National Standards TI |
English PDF |
GB 19576-2004 |
The minimum allowable values of the energy effic-iency and energy efficiency grades for unitary air condiTIoners 单元式空气调节机能效限定值及能源效率等级 |
China National Standards TI |
English PDF |
GB 4066.2-2004 |
Fire exTInguishing media--Part 2:ABC powder 干粉灭火剂 第2部分:ABC干粉灭火剂 |
China National Standards TI |
English PDF |
GB 4066.1-2004 |
Fire exTInguishing media--Part 1:BC powder 干粉灭火剂 第1部分:BC干粉灭火剂 |
China National Standards TI |
English PDF |
GB 19574-2004 |
Limited values of energy efficiency and evaluaTIng values of energy conservation of ballast for high-pressure sodium lamps 高压钠灯用镇流器能效限定值及节能评价值 |
China National Standards TI |
English PDF |
GB 19573-2004 |
Limited values of energy efficiency and raTIng criteria for high-pressure sodium vapour lamps 高压钠灯能效限定值及能效等级 |
China National Standards TI |
English PDF |
GB 14232.1-2004 |
PlasTIcs collapsible containers for human blood and blood components--Part1:Conventional containers 人体血液及血液成分袋式塑料容器 第1部分:传统型血袋 |
China National Standards TI |
English PDF |
GB/T 19571-2004 |
Technical specificaTIon for the management of marine protected areas 海洋自然保护区管理技术规范 |
China National Standards TI |
English PDF |
GB/T 19570-2004 |
Engineering technical specificaTIon for sewage pipeline discharging into the sea 污水排海管道工程技术规范 |
China National Standards TI |
English PDF |
GB/T 19566-2004 |
Technical regulaTIons for sugarcane high yield cultivation in dry-farmland 旱地糖料甘蔗高产栽培技术规程 |
China National Standards TI |
English PDF |
GB/T 19563-2004 |
Experimental idenTIfication method for variety of soybean seed--ISSR 大豆种子品种鉴定实验方法 简单重复序列间区法 |
China National Standards TI |
English PDF |
GB/T 19562-2004 |
Rules for invesTIgation and forecast of soybeanmoth [Leguminivora glycinivorella (Masts.)] 大豆食心虫测报调查规范 |
China National Standards TI |
English PDF |
GB/T 19537-2004 |
Guide for audiTIon on HACCP system for vegetable processing 蔬菜加工企业 HACCP体系审核指南 |
China National Standards TI |
English PDF |
GB/T 19534-2004 |
HorTIcultural machinery--Classification--Vocabulary 园林机械 分类词汇 |
China National Standards TI |
English PDF |
GB 16735-2004 |
Road vehicle--Vehicle idenTIfication number(VIN) 道路车辆 车辆识别代号(VIN) |
China National Standards TI |
English PDF |
GB/T 19531.4-2004 |
Technical requirement for the observaTIonal environment of seismic stations--Part 4:Underground fluid observation 地震台站观测环境技术要求 第4部分:地下流体观测 |
China National Standards TI |
English PDF |
GB/T 19531.3-2004 |
Technical requirement for the observaTIonal environment of seismic stations--Part 3:Crustal deformation observation 地震台站观测环境技术要求 第3部分:地壳形变观测 |
China National Standards TI |
English PDF |
GB/T 19531.2-2004 |
Technical requirement for the observaTIonal environment of seismic stations--Part 2:Electromagnetic observation 地震台站观测环境技术要求 第2部分:电磁观测 |
China National Standards TI |
English PDF |
GB/T 19531.1-2004 |
Technical requirement for the observaTIonal environment of seismic stations--Part 1:Seismometry 地震台站观测环境技术要求 第1部分:测震 |
China National Standards TI |
English PDF |
GB/T 18375.7-2004 |
ProstheTIcs--Structural testing of lower-limb prostheses--Part 7:Test submission document 假肢 下肢假肢的结构检验 第7部分:试验呈交文件 |
China National Standards TI |
English PDF |
GB/T 6002.5-2004 |
TexTIle machinery terminology--Part 5:Cone and cheese winding machines 纺织机械术语 第5部分:络筒机 |
China National Standards TI |
English PDF |
GB/T 6002.1-2004 |
TexTIle machinery terminology--Part 1:Drafting arrangements for spinning machines 纺织机械术语 第1部分:纺部机械牵伸装置 |
China National Standards TI |
English PDF |
GB/T 6002.10-2004 |
TexTIle machinery terminology--Part 10:Preparing machinery of warp for weaving 纺织机械术语 第10部分:织造前经纱准备机械 |
China National Standards TI |
English PDF |
GB/T 19556-2004 |
TexTIle machinery and accessories--Pirn winders and cross winders--Definition of left and right sides 纺织机械与附件 卷纬机和交叉卷绕络筒机 左右侧定义 |
China National Standards TI |
English PDF |
GB/T 19555-2004 |
TexTIle machinery and accessories--Lingoes for jacquard weaving 纺织机械与附件 提花织造用铅锤 |
China National Standards TI |
English PDF |
GB/T 19554.3-2004 |
TexTIle machinery and accessories--Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods--Part 3:Carrying rod for healds with C-and J-shaped end loops 纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第3部分:C型和J型综耳钢片综用穿综杆 |
China National Standards TI |
English PDF |
GB/T 19554.2-2004 |
TexTIle machinery and accessories--Main dimension of open end loop flat steelhealds and their corresponding heald-carrying rods--Part 2:J-shapes end loops 纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第2部分:J型综耳 |
China National Standards TI |
English PDF |
GB/T 19554.1-2004 |
TexTIle machinery and accessories--Main dimension of open end loop flat steelhealds and their corresponding heald-carrying rods--Part 1:C-shapes end loops 纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第1部分:C型综耳 |
China National Standards TI |
English PDF |
GB/T 19553-2004 |
TexTIle machinery and accessories--Heald carrying rods for healds with closed “O”-shaped end loops 纺织机械与附件 闭口“O”型综耳综丝用的穿综杆 |
China National Standards TI |
English PDF |
GB/T 19552-2004 |
TexTIle machinery and accessories--Flat healds with closed end loops--Dimensions 纺织机械与附件 闭口综耳钢片综 尺寸 |
China National Standards TI |
English PDF |
GB/T 19551-2004 |
TexTIle machinery--Warp sizing machines--Maximum usable width 纺织机械 浆纱机 最大有效宽度 |
China National Standards TI |
English PDF |
GB/T 19550-2004 |
TexTIle machinery and accessories--Preparing machinery of warp for weaving--Definition of left and right sides 纺织机械与附件 织造前经纱准备机械 左右侧定义 |
China National Standards TI |
English PDF |
GB/T 19549-2004 |
TexTIle machinery and accessories--Spinning machinery--Definition of left and right sides 纺织机械与附件 纺部机械 左右侧定义 |
China National Standards TI |
English PDF |
GB/T 19548-2004 |
TexTIle machinery and accessories--Weaving looms--Definition of left and right sides 纺织机械与附件 织机 左右侧定义 |
China National Standards TI |
English PDF |
GB/T 19546-2004 |
Medical and funcTIonal classificational of standing volleyball for disabled athletes 残疾人站式排球运动员医学和功能分级 |
China National Standards TI |
English PDF |
GB/T 19544-2004 |
ClassificaTIon and general technology of spinal orthoses 脊柱矫形器的分类及通用技术条件 |
China National Standards TI |
English PDF |
GB/T 19543-2004 |
Prostheses--Structural tesTIng of hip units 假肢 髋关节结构检验 |
China National Standards TI |
English PDF |
GB/T 19386.2-2004 |
TexTIle machinery and accessories--Packages of yarns and intermediate products--Part 2:Forms ofwinding 纺织机械与附件 纱线和中间产品的卷装 第2部分:卷绕类型 |
China National Standards TI |
English PDF |
GB/T 18737.6-2004 |
TexTIle machinery and accessories--Beams for winding--Part 6:Beams for ribbon weaving and ribbon knitting 纺织机械与附件 经轴 第6部分:织带机和钩编机用经轴 |
China National Standards TI |
English PDF |
GB/T 18375.8-2004 |
ProstheTIcs--Structural testing of lower-limb prostheses--Part 8:Test report 假肢 下肢假肢的结构检验 第8部分:检验报告 |
China National Standards TI |
English PDF |
GB/T 18375.6-2004 |
ProstheTIcs--Structural testing of lower-limb prostheses--Part 6:Loading parameters of supplementary structural tests 假肢 下肢假肢的结构检验 第6部分:辅助结构检验中的加载参数 |
China National Standards TI |
English PDF |
GB/T 18375.5-2004 |
ProstheTIcs--Structural testing of lower-limb prostheses--Part 5:Supplementary structural tests 假肢 下肢假肢的结构检验 第5部分:辅助结构检验 |
China National Standards TI |
English PDF |
GB/T 5822.2-2004 |
Test method of petroleum ether insolubles in lubricaTIng oil for railway locomotive diesel engine 铁路内燃机车柴油机油 石油醚不溶物测定方法 |
China National Standards TI |
English PDF |
GB/T 4549.7-2004 |
Railway vehicle vocabulary--Part 7:HeaTIng,ventilation and air conditioning equipment 铁道车辆词汇 第7部分:采暖、通风及空气调节装置 |
China National Standards TI |
English PDF |
GB/T 4549.6-2004 |
Railway vehicle vocabulary--Part 6:Doors、windows and their operaTIng devices 铁道车辆词汇 第6部分:门、窗及其开闭装置 |
China National Standards TI |
English PDF |
GB/T 4549.4-2004 |
Railway vehicle vocabulary--Part 4:Coupler,draft gear and vesTIbule diaphragm 铁道车辆词汇 第4部分:车钩缓冲及风挡装置 |
China National Standards TI |
English PDF |
GB/T 19557.8-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Plum (Prunus spp.) 植物新品种特异性、一致性和稳定性测试指南 李 |
China National Standards TI |
English PDF |
GB/T 19557.7-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Rice (Oryza sativa L.) 植物新品种特异性、一致性和稳定性测试指南 水稻 |
China National Standards TI |
English PDF |
GB/T 19557.6-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Ramie(Boehmeria nivea L.) 植物新品种特异性、一致性和稳定性测试指南 苎麻 |
China National Standards TI |
English PDF |
GB/T 19557.5-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Chinese cabbage [Brassica campestris L.ssp. pekinensis(Lour) Olsson] 植物新品种特异性、一致性和稳定性测试指南 大白菜 |
China National Standards TI |
English PDF |
GB/T 19557.4-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Soybean [Glycinemax (L.) Merr.] 植物新品种特异性、一致性和稳定性测试指南 大豆 |
China National Standards TI |
English PDF |
GB/T 19557.3-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Durum wheat (Triticum durum Desf.) 植物新品种特异性、一致性和稳定性测试指南 硬粒小麦 |
China National Standards TI |
English PDF |
GB/T 19557.2-2004 |
Guidelines for the conduct of tests for disTInctness,uniformity and stability--Wheat (Triticum aestivum L.) 植物新品种特异性、一致性和稳定性测试指南 普通小麦 |
China National Standards TI |
English PDF |
GB/T 19557.1-2004 |
General direcTIves for the conduct of tests of distinctness,uniformity and stability for new varietiesof plants 植物新品种特异性、一致性和稳定性测试指南 总则 |
China National Standards TI |
English PDF |
GB/T 19547-2004 |
Sensory analysis--Methodology--Magnitude esTImation method 感官分析 方法学 量值估计法 |
China National Standards TI |
English PDF |
GB/T 12818-2004 |
Rules for inspecTIng and testing of railway passenger car after completion of construction 铁道客车组装后的检查与试验规则 |
China National Standards TI |
English PDF |
GB/T 12817-2004 |
General technical specificaTIon for railway passenger car 铁道客车通用技术条件 |
China National Standards TI |
English PDF |
GB/T 19538-2004 |
Hazard analysis and criTIcal control point(HACCP)system and guidelines for its application 危害分析与关键控制点(HACCP)体系及其应用指南 |
China National Standards TI |
English PDF |
GB/T 19540-2004 |
DeterminaTIon of zearalenone in feeds 饲料中玉米赤霉烯酮的测定 |
China National Standards TI |
English PDF |
GB/T 19539-2004 |
DeterminaTIon of ochratoxin A in feeds 饲料中赭曲霉毒素A的测定 |
China National Standards TI |
English PDF |
GB/T 9843-2004 |
SpecificaTIons for urea high pressure scrubber 尿素高压洗涤器技术条件 |
China National Standards TI |
English PDF |
GB/T 9842-2004 |
SpecificaTIon for urea reactor 尿素合成塔技术条件 |
China National Standards TI |
English PDF |
GB/T 8910.3-2004 |
Hand-held portable power tools--Measurement of vibraTIons at the handle--Part 3:Rock drills and rotary hammers 手持便携式动力工具 手柄振动测量方法 第3部分:凿岩机和回转锤 |
China National Standards TI |
English PDF |
GB/T 8910.2-2004 |
Hand-held portable power tools--Measurement of vibraTIons at the handle Part 2:Chippinghammers and riveting hammers 手持便携式动力工具 手柄振动测量方法 第2部分:铲和铆钉机 |
China National Standards TI |
English PDF |
GB/T 8910.1-2004 |
Hand-held portablepower tools--Measurement of vibraTIons at the handle--Part 1:General 手持便携式动力工具 手柄振动测量方法 第1部分:总则 |
China National Standards TI |
English PDF |
GB/T 7734-2004 |
Method for ultrasonic tesTIng of clad steel plates 复合钢板超声波检验方法 |
China National Standards TI |
English PDF |
GB/T 6374-2004 |
Shanks for rock drilling machines and pneumaTIc tools and fitting dimensions of chuck bushings 凿岩机械与气动工具 尾柄和衬套配合尺寸 |
China National Standards TI |
English PDF |
GB/T 5773-2004 |
The method of performance test for posiTIve displacement refrigerant compressors 容积式制冷剂压缩机性能试验方法 |
China National Standards TI |
English PDF |
Find out:39883Items | To Page of: First -Previous-Next -Last | [336] [337] [338] [339] [340] [341] [342] |