GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 8745-2001 |
TexTIles--Burning behaviour--Determination of surface burning time of fabrics 纺织品 燃烧性能 织物表面燃烧时间的测定 |
China National Standards TI |
English PDF |
GB/T 8632-2001 |
TexTIles--Woven fabrics--Determination of dimensional change on commercial laundering near the boiling point 纺织品 机织物 近沸点 商业洗烫后尺寸变化的测定 |
China National Standards TI |
English PDF |
GB/T 8631-2001 |
TexTIles--Determination of dimensional changes of fabrics induced by cold-water immersion 纺织品 织物因冷水浸渍而引起的尺寸变化的测定 |
China National Standards TI |
English PDF |
GB/T 8629-2001 |
TexTIles--Domestic washing and dryingprocedures for textile testing 纺织品 试验用家庭洗涤和干燥程序 |
China National Standards TI |
English PDF |
GB/T 8424.3-2001 |
TexTIles--Tests for colour fastness--Calculation of colour differences 纺织品 色牢度试验 色差的计算 |
China National Standards TI |
English PDF |
GB/T 8424.2-2001 |
TexTIles--Tests for colour fastness--Instrumental assessment of relative whiteness 纺织品 色牢度试验 相对白度的仪器评定方法 |
China National Standards TI |
English PDF |
GB/T 8424.1-2001 |
TexTIles--Tests for colour fastness--General principles for measurement of surface colour 纺织品 色牢度试验 表面颜色的测定通则 |
China National Standards TI |
English PDF |
GB/T 7940.3-2001 |
PneumaTIc fluid power--Five-port directional control valves--Part 3:Code system for communication of valve functions 气动 五气口方向控制阀 第3部分:功能识别编码体系 |
China National Standards TI |
English PDF |
GB/T 7307-2001 |
Pipe threads with 55 degree thread angle where pressure-TIght joints are not made on the threads 55°非密封管螺纹 |
China National Standards TI |
English PDF |
GB/T 6075.4-2001 |
Mechanical vibraTIon--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 |
China National Standards TI |
English PDF |
GB/T 5708-2001 |
TexTIles--Knitted fabrics--Vocabulary 纺织品 针织物 术语 |
China National Standards TI |
English PDF |
GB/T 2543.2-2001 |
TexTIles--Determination of twist in yarn--Part 2:Untwist-retwist method 纺织品 纱线捻度的测定 第2部分:退捻加捻法 |
China National Standards TI |
English PDF |
GB/T 18329.1-2001 |
Plain bearings--Non-destrucTIve ultrasonic testing of hond for metallic multilayer plain bearings 滑动轴承 多层金属滑动轴承结合强度的超声波无损检验 |
China National Standards TI |
English PDF |
GB/T 18328-2001 |
Guidance for selecTIon of vibration generator system 振动台选择指南 |
China National Standards TI |
English PDF |
GB/T 18327.2-2001 |
Plain bearings--ApplicaTIons 滑动轴承 应用符号 |
China National Standards TI |
English PDF |
GB/T 18326-2001 |
Plain bearings--MulTIlayer materials for thin-walled plain bearings 滑动轴承 薄壁滑动轴承用金属多层材料 |
China National Standards TI |
English PDF |
GB/T 18325.1-2001 |
Plainbearings--Bearing faTIgue--Plain bearings in test rigs and in application underconditions of hydrodynamic lubrication 滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度 |
China National Standards TI |
English PDF |
GB/T 18319-2001 |
TexTIles--Testing method for thermal retention with accumulated by infrared ray 纺织品 红外蓄热保暖性的试验方法 |
China National Standards TI |
English PDF |
GB/T 18311.6-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 3-6:Examinations and measurements--Return loss 纤维光学互连器件和无源器件 基本试验和测量程序 第3-6部分:检查和测量 回波损耗 |
China National Standards TI |
English PDF |
GB/T 18311.3-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 3-3:Examinations andmeasurements--Monitoring change in attenuation and in return loss (multiple paths) 纤维光学互连器件和无源器件 基本试验和测量程序 第3-3部分:检查和测量 监测衰减和回波损耗变化(多路) |
China National Standards TI |
English PDF |
GB/T 18311.2-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 3-2:Examinations and measurements--Polarization dependence of a single-mode fibre optic device 纤维光学互连器件和无源器件 基本试验和测量程序 第3-2部分:检查和测量 单模纤维光学器件偏振依赖性 |
China National Standards TI |
English PDF |
GB/T 18310.6-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 2-6:Tests--Tensile strength of coupling mechanism 纤维光学互连器件和无源器件 基本试验和测量程序 第2-6部分:试验 锁紧机构抗拉强度 |
China National Standards TI |
English PDF |
GB/T 18310.4-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 2-4:Tests--Fibre/cable retention 纤维光学互连器件和无源器件 基本试验和测量程序 第2-4部分:试验 光纤/光缆保持力 |
China National Standards TI |
English PDF |
GB/T 18310.39-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 2-39:Tests--Susceptibility to externalmagnetic fields 纤维光学互连器件和无源器件 基本试验和测量程序 第2-39部分:试验 对外界磁场敏感性 |
China National Standards TI |
English PDF |
GB/T 18310.3-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test andmeasurement procedures--Part 2-3:Tests--Static shear load 纤维光学互连器件和无源器件 基本试验和测量程序 第2-3部分:试验 静态剪切力 |
China National Standards TI |
English PDF |
GB/T 18310.2-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test andmeasurement procedures--Part 2-2:Tests--Mating durability 纤维光学互连器件和无源器件 基本试验和测量程序 第2-2部分:试验 配接耐久性 |
China National Standards TI |
English PDF |
GB/T 18310.18-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 2-18:Tests--Dry heat--High temperatureendurance 纤维光学互连器件和无源器件 基本试验和测量程序 第2-18部分:试验 干热 高温耐久性 |
China National Standards TI |
English PDF |
GB/T 18309.1-2001 |
Fibre opTIc interconnecting devices and passive components--Basic test and measurement procedures--Part 1:General and guidance 纤维光学互连器件和无源器件 基本试验和测量程序 第1部分:总则和导则 |
China National Standards TI |
English PDF |
GB/T 18308.1-2001 |
Fiber opTIc adaptors--Part 1:Generic specification 纤维光学转接器 第1部分:总规范 |
China National Standards TI |
English PDF |
GB 18306-2001 |
Seismic ground moTIon parameter zonation map of China 中国地震动参数区划图 |
China National Standards TI |
English PDF |
GB/T 18302-2001 |
Basic requirements for instruments to fly the NaTIonal Flag 国旗升挂装置基本要求 |
China National Standards TI |
English PDF |
GB/T 2998-2001 |
Shaped insulaTIng refractory products--Determination of bulk density and true porosity 定形隔热耐火制品 体积密度和真气孔率试验方法 |
China National Standards TI |
English PDF |
GB 9237-2001 |
Mechanical refrigeraTIng systems usedfor cooling and heating--Safety requirements 制冷和供热用机械制冷系统安全要求 |
China National Standards TI |
English PDF |
GB 18299-2001 |
AutomoTIve LPG steel cylinder multivalve 机动车用液化石油气钢瓶集成阀 |
China National Standards TI |
English PDF |
GB 10080-2001 |
Safety requirements of fan for air condiTIoning 空调用通风机安全要求 |
China National Standards TI |
English PDF |
GB/T 24024-2001 |
Environmental management--Environmental labels and declaraTIons--Type Ⅰ environmental labelling--Principles and procedures 环境管理 环境标志和声明 Ⅰ 型环境标志 原则和程序 |
China National Standards TI |
English PDF |
GB/T 24021-2001 |
Environmental management--Environmental labels and declaraTIons--Self-declared environmental claims (Type Ⅱ environmental labelling) 环境管理 环境标志和声明 自我环境声明(Ⅱ型环境标志) |
China National Standards TI |
English PDF |
GB/T 18293-2001 |
On-line measurement on operaTIng efficiency of power convertor equipments 电力整流设备运行效率的在线测量 |
China National Standards TI |
English PDF |
GB/T 15320-2001 |
EvaluaTIon guides of the energy conservation products 节能产品评价导则 |
China National Standards TI |
English PDF |
GB/T 18304-2001 |
InformaTIon technology--Chinese specification of internet character transfer format for email 信息技术 因特网中文规范 电子邮件传送格式 |
China National Standards TI |
English PDF |
GB/T 18290.5-2000 |
Solderless connecTIons--Part 5:Solderless press-in connections--General requirements,test methods and practical guidance 无焊连接 第5部分:无焊压入式连接 一般要求、试验方法和使用导则 |
China National Standards TI |
English PDF |
GB/T 18290.4-2000 |
Solderless connecTIons--Part 4:Solderless non-accessible insulation displacement connections--General requirements,test methods and practical guidance 无焊连接 第4部分:不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards TI |
English PDF |
GB/T 18290.3-2000 |
Solderless connecTIons--Part 3:Solderless accessible insulation displacement connections--General requirements,test methods and practical guidance 无焊连接 第3部分:可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards TI |
English PDF |
GB/T 18290.2-2000 |
Solderless connecTIons--Part 2:Solderless crimped connections--General requirements, test methods and practical guidance 无焊连接 第2部分:无焊压接连接 一般要求、试验方法和使用导则 |
China National Standards TI |
English PDF |
GB/T 18289-2000 |
General specificaTIon of nickel-cadmium battery for cellular phone 蜂窝电话用镉镍电池总规范 |
China National Standards TI |
English PDF |
GB/T 18288-2000 |
General specificaTIon of nickel-metal hydride battery for cellular phone 蜂窝电话用金属氢化物镍电池总规范 |
China National Standards TI |
English PDF |
GB/T 18286-2000 |
InformaTIon technology--Control functionsfor text communication 信息技术 文本通信用控制功能 |
China National Standards TI |
English PDF |
GB/T 15237.1-2000 |
Terminology work--Vocabulary--Part 1:Theory and applicaTIon 术语工作 词汇 第1部分:理论与应用 |
China National Standards TI |
English PDF |
GB/T 18246-2000 |
DeterminaTIon of amino acids in feeds 饲料中氨基酸的测定 |
China National Standards TI |
English PDF |
GB/T 18277-2000 |
Highway toll collecTIon mode 公路收费制式 |
China National Standards TI |
English PDF |
GB/T 18276-2000 |
Test-bed methods and evaluaTIng index of dynamic property for motor vehicles 汽车动力性台架试验方法和评价指标 |
China National Standards TI |
English PDF |
GB/T 18275.2-2000 |
SpecificaTIons for automobile braking transmission device being overhauled--Hydraulic braking 汽车制动传动装置修理技术条件 液压制动 |
China National Standards TI |
English PDF |
GB/T 18275.1-2000 |
SpecificaTIons for automobile braking transmission device being overhauled--Air braking 汽车制动传动装置修理技术条件 气压制动 |
China National Standards TI |
English PDF |
GB/T 18274-2000 |
Technical specificaTIons for motor vehicle drum brake being overhauled 汽车鼓式制动器修理技术条件 |
China National Standards TI |
English PDF |
GB/T 18273-2000 |
Petroleum and liquid petroleum products--Direct staTIc measurements--Contents ofvertical storage tanks--Mass measurement by hydrostatic tank gauging 石油和液体石油产品 立式罐内油量的直接静态测量法 (HTG质量测量法) |
China National Standards TI |
English PDF |
GB 9706.20-2000 |
Medical electrical equipment--Part 2:ParTIcular requirements for the safety of diagnostic andtherapeutic laser equipment 医用电气设备 第2部分:诊断和治疗激光设备安全专用要求 |
China National Standards TI |
English PDF |
GB 18282.1-2000 |
SterilizaTIon of health care products--Chemical indicators--Part 1:General requirements 医疗保健产品灭菌 化学指示物 第1部分:通则 |
China National Standards TI |
English PDF |
GB 18281.3-2000 |
SterilizaTIon of health care products--Biological indicators--Part 3:Biological indicators for moist heat sterilization 医疗保健产品灭菌 生物指示物 第3部分:湿热灭菌用生物指示物 |
China National Standards TI |
English PDF |
GB 18281.2-2000 |
SterilizaTIon of health care products--Biological indicators--Part 2:Biological indicators for ethylene oxide sterilization 医疗保健产品灭菌 生物指示物 第2部分:环氧乙烷灭菌用生物指示物 |
China National Standards TI |
English PDF |
GB 18281.1-2000 |
SterilizaTIon of health care products--Biological indicators--Part 1:General 医疗保健产品灭菌 生物指示物 第1部分:通则 |
China National Standards TI |
English PDF |
GB 18280-2000 |
SterilizaTIon of healthcare products--Requirement for validation and routine control--Radiation sterilization 医疗保健产品灭菌 确认和常规控制要求 辐射灭菌 |
China National Standards TI |
English PDF |
GB 18279-2000 |
Medical devices--ValidaTIon androutine control of ethylene oxide sterilization 医疗器械 环氧乙烷灭菌 确认和常规控制 |
China National Standards TI |
English PDF |
GB 18278-2000 |
SterilizaTIon of health care products--Requirements for validation and routine control--Industrial moist heat sterilization 医疗保健产品灭菌 确认和常规控制要求 工业湿热灭菌 |
China National Standards TI |
English PDF |
GB/T 16895.9-2000 |
Electrical installaTIons of buildings--Part 7:Requirements for special installations or locations--Section 707:Earthing requirements for the electrical installation of data processing equipment 建筑物电气装置 第7部分:特殊装置或场所的要求 第707节:数据处理设备用电气装置的接地要求 |
China National Standards TI |
English PDF |
GB/T 15153.2-2000 |
Telecontrol equipment and systems--Part 2:OperaTIng conditions--Section 2:Environmental conditions (cli-matic,mechanical and other non-electrical influences) 远动设备及系统 第2部分:工作条件 第2篇:环境条件(气候、机械和其他非电影响因素) |
China National Standards TI |
English PDF |
GB/T 12162.1-2000 |
X and gamma reference radiaTIon for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第1部分:辐射特性及产生方法 |
China National Standards TI |
English PDF |
GB/T 4588.12-2000 |
SpecificaTIon for mass laminationpanels (semi-manufactured multilayer printed boards) 预制内层层压板规范(半制成多层印制板) |
China National Standards TI |
English PDF |
GB/T 17737.2-2000 |
Radio-frequency cables--Part 2:SecTIonal specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation 射频电缆 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 |
China National Standards TI |
English PDF |
GB/T 18272.5-2000 |
Industrial-process measurement and control--EvaluaTIon of system properties for the purpose of system assessment--Part 5:Assessment of system dependability 工业过程测量和控制 系统评估中系统特性的评定 第5部分:系统可信性评估 |
China National Standards TI |
English PDF |
GB/T 18272.3-2000 |
Industrial-process measurement and control--EvaluaTIon of system properties for the purpose of system assessment--Part 3:Assessment of system function-ality 工业过程测量和控制 系统评估中系统特性的评定 第3部分:系统功能性评估 |
China National Standards TI |
English PDF |
GB/T 18272.2-2000 |
Industrial-process measurement and control--EvaluaTIon of system properties for the purpose of system assessment--Part 2:Assessment methodology 工业过程测量和控制 系统评估中系统特性的评定 第2部分:评估方法学 |
China National Standards TI |
English PDF |
GB/T 18272.1-2000 |
Industrial-process measurement and control--EvaluaTIon of system properties for the purpose of system assessment--Part 1:General consideration and methodology 工业过程测量和控制 系统评估中系统特性的评定 第1部分:总则和方法学 |
China National Standards TI |
English PDF |
GB/T 18271.4-2000 |
Process measurement and control devices--General methods and procedures for evaluaTIng performance--Part 4:Evaluation report content 过程测量和控制装置 通用性能评定方法和程序 第4部分:评定报告的内容 |
China National Standards TI |
English PDF |
GB/T 18271.3-2000 |
Process measurement and control devices--General methods and procedures for evaluaTIng performance--Part 3:Tests for the effects of influence quantities 过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验 |
China National Standards TI |
English PDF |
GB/T 18271.2-2000 |
Process measurement and control devices--General methods and procedures for evaluaTIng performance--Part 2:Tests under reference conditions 过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验 |
China National Standards TI |
English PDF |
GB/T 18271.1-2000 |
Process measurement and control devices--General methods and procedures for evaluaTIng performance--Part 1:General considerations 过程测量和控制装置 通用性能评定方法和程序 第1部分:总则 |
China National Standards TI |
English PDF |
GB/T 17214.3-2000 |
OperaTIng conditions for industrial-process measurement and control equipment--Part 3:Mechanical influences 工业过程测量和控制装置的工作条件 第3部分:机械影响 |
China National Standards TI |
English PDF |
GB/T 18266.1-2000 |
Ranking standard for gymnasium and playground--Part 1:Star-raTIng standard for bowling playground 体育场所等级的划分 第1部分:保龄球馆星级的划分及评定 |
China National Standards TI |
English PDF |
GB 18265-2000 |
OperaTIon conditions and technical requirements for enterprises handling dangerous chemicals business 危险化学品经营企业开业条件和技术要求 |
China National Standards TI |
English PDF |
GB/T 6202-2000 |
General specificaTIons for wide belt sanders 宽带式砂光机通用技术条件 |
China National Standards TI |
English PDF |
GB/T 5051-2000 |
General technical condiTIons for the particle forming machine 刨花铺装机通用技术条件 |
China National Standards TI |
English PDF |
GB/T 18264-2000 |
Acceptance generality of the parTIcle board production line 刨花板生产线验收通则 |
China National Standards TI |
English PDF |
GB/T 18262-2000 |
General specificaTIons for wood-based panel mach-inery 人造板机械通用技术条件 |
China National Standards TI |
English PDF |
GB/T 18258-2000 |
Damping materials--TesTIng method for damping properties 阻尼材料 阻尼性能测试方法 |
China National Standards TI |
English PDF |
GB/T 18251-2000 |
Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fitTIngs and compounds 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法 |
China National Standards TI |
English PDF |
GB/T 6398-2000 |
Standard test method for faTIgue crack growth rates of metallic materials 金属材料疲劳裂纹扩展速率试验方法 |
China National Standards TI |
English PDF |
GB/T 4513-2000 |
ClassificaTIon of unshaped refractory materials 不定形耐火材料分类 |
China National Standards TI |
English PDF |
GB/T 18257-2000 |
Refractory bricks for use in rotary kilns--Hot-face idenTIfication marking 回转窑用耐火砖热面标记 |
China National Standards TI |
English PDF |
GB/T 18256-2000 |
Welded steel tubes(except submerged arc-welded)--Ultrasonic tesTIng for verification of hydraulic leak-tightness 焊接钢管(埋弧焊除外) 用于确认水压密实性的超声波检测方法 |
China National Standards TI |
English PDF |
GB/T 18255-2000 |
Coking viscous oil products--DeterminaTIon ofdistillation range 焦化粘油类产品馏程的测定 |
China National Standards TI |
English PDF |
GB/T 18253-2000 |
Steel and steel products--Types of inspecTIon documents 钢及钢产品 检验文件的类型 |
China National Standards TI |
English PDF |
GB/T 18250-2000 |
Test method for performance in plane deformaTIon of curtain wall’s 建筑幕墙平面内变形性能检测方法 |
China National Standards TI |
English PDF |
GB/T 3682-2000 |
DeterminaTIon of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定 |
China National Standards TI |
English PDF |
GB/T 18241.3-2000 |
Rubber lining--Part 3:Lining for floataTIon machine 橡胶衬里 第3部分:浮选机衬里 |
China National Standards TI |
English PDF |
GB 18245-2000 |
Safety regulaTIon for dust explosion intobacco processing system 烟草加工系统 粉尘防爆安全规程 |
China National Standards TI |
English PDF |
GB/T 223.78-2000 |
Methods for chemical analysis of iron,steel and alloy--Curcumin spectrophotometric method for the determinaTIon of boron content 钢铁及合金化学分析方法 姜黄素直接光度法测定硼含量 |
China National Standards TI |
English PDF |
GB/T 223.34-2000 |
Methods for chemical analysis of iron,steel and alloy--The determinaTIon of hydrochloric acid-insoluble content of iron powders 钢铁及合金化学分析方法 铁粉中盐酸不溶物的测定 |
China National Standards TI |
English PDF |
GB/T 18249-2000 |
Ferroalloys--Experimental methods for checking the bias of sampling and sample preparaTIon 检查铁合金取样和制样偏差的试验方法 |
China National Standards TI |
English PDF |
GB/T 15970.4-2000 |
Corrosion of metals and alloys--Stress corrosion tesTIng--Part 4:Preparation and use of uniaxially loaded tension specimens 金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用 |
China National Standards TI |
English PDF |
GB/T 15970.2-2000 |
Corrosionof metals and alloys--Stress corrosion tesTIng--Part 2:Preparation and use of bent-beam specimens 金属和合金的腐蚀 应力腐蚀试验 第2部分:弯梁试样的制备和应用 |
China National Standards TI |
English PDF |
Find out:39883Items | To Page of: First -Previous-Next -Last | [356] [357] [358] [359] [360] [361] [362] |