GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2423.48-2018 |
Environmental tesTIng—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method 环境试验-第2部分:-试验方法-试验Ff:振动-时间历程和正弦拍频法 |
China National Standards TI |
English PDF |
GB/T 2423.39-2018 |
Environmental tesTIng—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce 环境试验-第2部分:试验方法-试验Ee和导则:散装货物试验包含弹跳 |
China National Standards TI |
English PDF |
GB/T 2423.56-2018 |
Environmental tesTIng—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance 环境试验-第2部分:试验方法-试验Fh:宽带随机振动和导则 |
China National Standards TI |
English PDF |
GB/T 14906-2018 |
ClassificaTIon of internal combustion engine oils viscosity 内燃机油黏度分类 |
China National Standards TI |
English PDF |
GB/T 7784-2018 |
Test methods for power reciprocaTIng pump 机动往复泵试验方法 |
China National Standards TI |
English PDF |
GB/T 11023-2018 |
Test method of SF6 gas TIghtness for high—voltage switchgear 高压开关设备六氟化硫气体密封试验方法 |
China National Standards TI |
English PDF |
GB/T 4473-2018 |
SyntheTIc testing of high—voltage alternating current circuit—breakers 高压交流断路器的合成试验 |
China National Standards TI |
English PDF |
GB/T 5174-2018 |
Surface acTIve agents—Detergents—Determination of cationic-active matter content—Direct two-phase titration procedure 表面活性剂-洗涤剂-阳离子活性物含量的测定-直接两相滴定法 |
China National Standards TI |
English PDF |
GB/T 6374-2018 |
Rock drilling machines and pneumaTIc tools—Shanks and fitting dimensions of chuck bushings 凿岩机械与气动工具-尾柄和衬套配合尺寸 |
China National Standards TI |
English PDF |
GB/T 11498-2018 |
Semiconductor devices—Integrated circuits—Part 21:SecTIonal specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures 半导体器件-集成电路-第21部分:膜集成电路和混合膜集成电路分规范(采用鉴定批准程序)半导体器件-集成电路-第21部分:膜集成电路和混合膜集成电路分规范(采用鉴定批准程序) |
China National Standards TI |
English PDF |
GB/T 8196-2018 |
Safety of machinery—Guards—General requirements for the design and construcTIon of fixed and movable guards 机械安全-防护装置-固定式和活动式防护装置的设计与制造一般要求 |
China National Standards TI |
English PDF |
GB/T 6809.10-2018 |
ReciprocaTIng internal combustion engines—Vocabulary of components and systems—Part 10: Ignition systems 往复式内燃机-零部件和系统术语-第10部分:点火系统 |
China National Standards TI |
English PDF |
GB/T 1546-2018 |
Pulp—DeterminaTIon of Kappa number 纸浆-卡伯值的测定 |
China National Standards TI |
English PDF |
GB/T 5401-2018 |
Pulp—DeterminaTIon of alkali solubility 纸浆-碱溶解度的测定 |
China National Standards TI |
English PDF |
GB/T 19812.4-2018 |
PlasTIc equipment for water saving irrigation—Part 4:Polyethylene (PE) flexible pipe 塑料节水灌溉器材-第4部分:-聚乙烯(PE)软管 |
China National Standards TI |
English PDF |
GB/T 31057.3-2018 |
Granular materials—Physical properTIes—Part 3: Fluidity index 颗粒材料-物理性能测试-第3部分:流动性指数的测量 |
China National Standards TI |
English PDF |
GB/T 31057.2-2018 |
Granular materials—Physical properTIes—Part 2: Determination of tap density 颗粒材料-物理性能测试-第2部分:振实密度的测量 |
China National Standards TI |
English PDF |
GB/T 742-2018 |
Fibrous raw material, pulp, paper and board—DeterminaTIon of residue(ash) on ignition at 575℃ and 900℃ 造纸原料、纸浆、纸和纸板-灼烧残余物(灰分)的测定(575℃和900℃) |
China National Standards TI |
English PDF |
GB/T 2423.7-2018 |
Environmental tesTIng—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品) |
China National Standards TI |
English PDF |
GB/T 30839.48-2018 |
Energy consumpTIon grading for electroheat installations—Part 48:Aluminum annealing furnace 工业电热装置能耗分等-第48部分:铝材退火炉 |
China National Standards TI |
English PDF |
GB/T 16430-2018 |
DeterminaTIon of the minimum ignition temperature of dust layer 粉尘层最低着火温度测定方法 |
China National Standards TI |
English PDF |
GB/T 16425-2018 |
DeterminaTIon for minimum explosive concentration of dust clouds 粉尘云爆炸下限浓度测定方法 |
China National Standards TI |
English PDF |
GB/T 16427-2018 |
DeterminaTIon for electrical resistivity of dust layers 粉尘层电阻率测定方法 |
China National Standards TI |
English PDF |
GB/T 13062-2018 |
Semiconductor devices—Integrated circuits—Part 21-1:Blank detail specificaTIon for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures 半导体器件-集成电路-第21-1部分:膜集成电路和混合膜集成电路空白详细规范(采用鉴定批准程序) |
China National Standards TI |
English PDF |
GB/T 3229-2018 |
Assembly tools for screws and nuts—Dimensions and torque tesTIng of drive ends for hand and machine-operated screwdriver bits and connecting parts 螺栓螺母用装配工具-手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards TI |
English PDF |
GB/T 12654-2018 |
WriTIng paper 书写用纸 |
China National Standards TI |
English PDF |
GB/T 5836.2-2018 |
UnplasTIcized poly(vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管件 |
China National Standards TI |
English PDF |
GB/T 5836.1-2018 |
UnplasTIcized poly(vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管材 |
China National Standards TI |
English PDF |
GB/T 26136-2018 |
Ultra-high pressure waterjet cutTIng machine 超高压水切割机 |
China National Standards TI |
English PDF |
GB/T 25384-2018 |
Wind turbines—Full scale structural tesTIng of rotor blade 风力发电机组-风轮叶片全尺寸结构试验 |
China National Standards TI |
English PDF |
GB/T 20390.1-2018 |
TexTIles―Assessment of the ignitability of bedding items―Part 1: Ignition source: smouldering cigarette 纺织品-床上用品可点燃性的评定-第1部分:香烟为点火源 |
China National Standards TI |
English PDF |
GB/T 23322-2018 |
TexTIles—Determination of surfactant—Alkylphenols and Alkylphenol ethoxylates 纺织品-表面活性剂的测定-烷基酚和烷基酚聚氧乙烯醚 |
China National Standards TI |
English PDF |
GB/T 10339-2018 |
Paper, board and pulp—DeterminaTIon of light scattering and absorption coefficients(Kubelka-Munk method) 纸、纸板和纸浆-光散射和光吸收系数的测定(Kubelka-Munk法) |
China National Standards TI |
English PDF |
GB/T 10066.6-2018 |
Test methods for electroheaTIng and electromagnetic processing installations—Part 6:Test methods for the determination of power output of industrial microwave heating installations 电热和电磁处理装置的试验方法-第6部分:工业微波加热装置输出功率的测定方法 |
China National Standards TI |
English PDF |
GB/T 19921-2018 |
Test method for parTIcles on polished silicon wafer surfaces 硅抛光片表面颗粒测试方法 |
China National Standards TI |
English PDF |
GB/T 17253-2018 |
SyntheTIc filament fabrics 合成纤维丝织物 |
China National Standards TI |
English PDF |
GB/T 22072-2018 |
SpecificaTIons and technical requirements for dry-type amorphous alloy core distribution transformers 干式非晶合金铁心配电变压器技术参数和要求 |
China National Standards TI |
English PDF |
GB/T 20626.2-2018 |
Specific environmental condiTIon—Electrical and electronic products for plateau—Part 2: Selective types and testing specification 特殊环境条件-高原电工电子产品-第2部分:选型和检验规范 |
China National Standards TI |
English PDF |
GB/T 10079-2018 |
Single-stage reciprocaTIng refrigerant compressor (unit) 活塞式单级制冷剂压缩机(组) |
China National Standards TI |
English PDF |
GB/T 10801.2-2018 |
Rigid extruded polystyrene foam board for thermal insulaTIon(XPS) 绝热用挤塑聚苯乙烯泡沫塑料(XPS) |
China National Standards TI |
English PDF |
GB/T 8190.8-2018 |
ReciprocaTIng internal combustion engines—Exhaust emission measurement—Part 8:Engine group determination 往复式内燃机-排放测量-第8部分:发动机系组的确定 |
China National Standards TI |
English PDF |
GB/T 21561.1-2018 |
Railway applicaTIons—Rolling stock pantographs characteristics and tests—Part 1:Pantographs for mainline vehicles 轨道交通-机车车辆受电弓特性和试验-第1部分:干线机车车辆受电弓 |
China National Standards TI |
English PDF |
GB/T 25122.1-2018 |
Railway applicaTIons—Power converters installed on board rolling stock—Part 1: Characteristics and test methods 轨道交通-机车车辆用电力变流器-第1部分:特性和试验方法 |
China National Standards TI |
English PDF |
GB/T 28026.2-2018 |
Railway applicaTIons—Fixed installations—Electrical safety,earthing and the return circuit—Part 2:Provisions against the effects of stray currents caused by d.c. traction systems 轨道交通-地面装置-电气安全、接地和回流-第2部分:直流牵引供电系统杂散电流的防护措施 |
China National Standards TI |
English PDF |
GB/T 28026.1-2018 |
Railway applicaTIons—Fixed installations—Electrical safety,earthing and the return circuit—Part 1:Protective provisions against electric shock 轨道交通-地面装置-电气安全、接地和回流-第1部分:电击防护措施 |
China National Standards TI |
English PDF |
GB/T 12914-2018 |
Paper and board—DeterminaTIon of tensile properties—Constant rate of elongation method(20mm/min) 纸和纸板-抗张强度的测定-恒速拉伸法(20mm/min) |
China National Standards TI |
English PDF |
GB/T 22364-2018 |
Paper and board—DeterminaTIon of bending resistance 纸和纸板-弯曲挺度的测定 |
China National Standards TI |
English PDF |
GB/T 27741-2018 |
Paper and board—DeterminaTIon of migratable fluorescent whitening agents 纸和纸板-可迁移性荧光增白剂的测定 |
China National Standards TI |
English PDF |
GB/T 19477-2018 |
OperaTIng procedure of livestock and poultry slaughtering — Cattle 畜禽屠宰操作规程-牛 |
China National Standards TI |
English PDF |
GB/T 19478-2018 |
OperaTIng procedure of livestock and poultry slaughtering—Chicken 畜禽屠宰操作规程-鸡 |
China National Standards TI |
English PDF |
GB/T 19115.1-2018 |
Wind-solar photovoltaic hybrid generate electricity system—Part 1: Technology condiTIon 风光互补发电系统-第1部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 22056-2018 |
Microscopes—Marking of objecTIves and eyepieces 显微镜-物镜和目镜的标志 |
China National Standards TI |
English PDF |
GB/T 22059-2018 |
Microscopes—Values, tolerances and symbols for magnificaTIon 显微镜-放大率数值、允差和符号 |
China National Standards TI |
English PDF |
GB/T 22063-2018 |
Microscopes—Interfacing connecTIon type C 显微镜-C型接口 |
China National Standards TI |
English PDF |
GB/T 17759-2018 |
InspecTIon method for grey fabric surface defects 本色布布面疵点检验方法 |
China National Standards TI |
English PDF |
GB/T 7403.2-2018 |
Lead-acid tracTIon batteries—Part 2:Product types and specifications 牵引用铅酸蓄电池-第2部分:产品品种和规格 |
China National Standards TI |
English PDF |
GB/T 7403.1-2018 |
Lead-acid tracTIon batteries—Part 1:Technical conditions 牵引用铅酸蓄电池-第1部分:技术条件 |
China National Standards TI |
English PDF |
GB/T 21203-2018 |
InformaTIon technology-Office equipment-Method for measuring digital copying productivity 信息技术-办公设备-数字式复印机复印生产力的测量方法 |
China National Standards TI |
English PDF |
GB/T 28449-2018 |
InformaTIon security technology—Testing and evaluation process guide for classified protection of cybersecurity 信息安全技术-网络安全等级保护测评过程指南 |
China National Standards TI |
English PDF |
GB/T 19278-2018 |
General terms and their definiTIons of thermoplastic pipes, fittings and valves 热塑性塑料管材、管件与阀门-通用术语及其定义 |
China National Standards TI |
English PDF |
GB/T 24813-2018 |
Forged steel lifTIng hooks with latch, grade 8 带安全闭锁装置的8级钢制锻造起重吊钩 |
China National Standards TI |
English PDF |
GB/T 18874.3-2018 |
Cranes—InformaTIon to be provided—Part 3:Tower cranes 起重机-供需双方应提供的资料-第3部分:塔式起重机 |
China National Standards TI |
English PDF |
GB/T 16986-2018 |
Bar code for commodity—ApplicaTIon identifier 商品条码-应用标识符 |
China National Standards TI |
English PDF |
GB/T 18264-2018 |
Acceptance generality of the parTIcleboard production line 刨花板生产线验收通则 |
China National Standards TI |
English PDF |
GB/T 36923-2018 |
IdenTIfication of pearl powder―X-ray diffraction analysis 珍珠粉鉴别方法-X射线衍射分析法 |
China National Standards TI |
English PDF |
GB/T 8756-2018 |
CollecTIon of metallographs on defects of germanium crystal 锗晶体缺陷图谱 |
China National Standards TI |
English PDF |
GB/T 37073-2018 |
Assessment guidelines for the ability of exhibiTIon construction enterprise 展览展示工程企业能力评价导则 |
China National Standards TI |
English PDF |
GB/T 37088-2018 |
Technial guide of once ferTIlization of maize 玉米一次性施肥技术指南 |
China National Standards TI |
English PDF |
GB/T 37087-2018 |
AnTI-counterfeiting technique for stamp identification 邮票鉴别技术条件 |
China National Standards TI |
English PDF |
GB/T 36997-2018 |
Hydraulic fluid power—IdenTIfication of manifold assemblies and their components 液压传动-油路块总成及其元件的标识 |
China National Standards TI |
English PDF |
GB/T 37162.1-2018 |
Hydraulic fluid power—Monitoring the level of parTIculate contamination of the fluid—Part 1: General principles 液压传动-液体颗粒污染度的监测-第1部分:总则 |
China National Standards TI |
English PDF |
GB/T 37163-2018 |
Hydraulic fluid power—DeterminaTIon of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle 液压传动-采用遮光原理的自动颗粒计数法测定液样颗粒污染度 |
China National Standards TI |
English PDF |
GB/T 37276-2018 |
ClassificaTIon and accreditation for senior care organization 养老机构等级划分与评定 |
China National Standards TI |
English PDF |
GB/T 36921-2018 |
DeterminaTIon of vitamin B2, vitamin B3 and vitamin B6 in toothpaste—High performance liquid chromatography 牙膏中维生素B2、维生素B3和维生素B6的测定-高效液相色谱法 |
China National Standards TI |
English PDF |
GB/T 37036.1-2018 |
InformaTIon technology—Biometrics used with mobile devices—Part1: General requirement 信息技术-移动设备生物特征识别-第1部分:通用要求 |
China National Standards TI |
English PDF |
GB/T 15851.3-2018 |
InformaTIon technology—Security techniques—Digital signature schemes giving message recovery—Part 3:Discrete logarithm based mechanisms 信息技术-安全技术-带消息恢复的数字签名方案-第3部分:基于离散对数的机制 |
China National Standards TI |
English PDF |
GB/T 36950-2018 |
InformaTIon security technology—Security technical requirements of smart card (EAL4+) 信息安全技术-智能卡安全技术要求(EAL4+) |
China National Standards TI |
English PDF |
GB/T 37076-2018 |
InformaTIon security technology—Technical requirements for fingerprint recognition system 信息安全技术-指纹识别系统技术要求 |
China National Standards TI |
English PDF |
GB/T 36957-2018 |
InformaTIon security technology —Requirements for disaster recovery service 信息安全技术-灾难恢复服务要求 |
China National Standards TI |
English PDF |
GB 8537-2018 |
NaTIonal Food Safety Standard - Drinking Natural Mineral Water 食品安全国家标准-饮用天然矿泉水 |
China National Standards TI |
English PDF |
GB 31646-2018 |
NaTIonal Food Safety Standard - Hygienic Standard for Production and Management of Frozen Foods 食品安全国家标准-速冻食品生产和经营卫生规范 |
China National Standards TI |
English PDF |
GB 31647-2018 |
NaTIonal Food Safety Standard - General Hygienic Practice for Food Additive Production 食品安全国家标准-食品添加剂生产通用卫生规范 |
China National Standards TI |
English PDF |
GB 19304-2018 |
NaTIonal Food Safety Standard - Hygienic Standard for Packaging Drinking Water Production 食品安全国家标准-包装饮用水生产卫生规范 |
China National Standards TI |
English PDF |
GB/T 51301-2018 |
Building InformaTIon Model Design Delivery Standard 建筑信息模型设计交付标准 |
China National Standards TI |
English PDF |
GB 15577-2018 |
Safety regulaTIons for dust explosion prevention and protection 粉尘防爆安全规程 |
China National Standards TI |
English PDF |
GB 14907-2018 |
Fire resisTIve coating for steel structure 钢结构防火涂料 |
China National Standards TI |
English PDF |
GB 51302-2018 |
Overhead insulated distribuTIon line design standard 架空绝缘配电线路设计标准 |
China National Standards TI |
English PDF |
GB 3847-2018 |
Limits and measurement methods for emissions form diesel vehicles under free acceleraTIon and lugdown cycle 柴油车污染物排放限值及测量方法(自由加速法及加载减速法) |
China National Standards TI |
English PDF |
GB/T 14235.1-2018 |
Low temperature pattern wax material for investment casTIng—Part 1: Testing methods for physical properties 熔模铸造低温模料-第1部分:物理性能试验方法 |
China National Standards TI |
English PDF |
GB/T 14235.2-2018 |
Low temperature pattern wax materials for investment casTIng—Part 2: Testing methods for usability properties 熔模铸造低温模料-第2部分:使用性能试验方法 |
China National Standards TI |
English PDF |
GB 18285-2018 |
Limits and measurement methods for emissions from gasoline vehicles under two-speed idle condiTIons and simple driving mode conditions 汽油车污染物排放限值及测量方法(双怠速法及简易工况法) |
China National Standards TI |
English PDF |
GB 50170-2018 |
Electrical installaTIon engineering - Rotating electrical machine construction and acceptance criteria 电气装置安装工程-旋转电机施工及验收标准 |
China National Standards TI |
English PDF |
GB 50168-2018 |
Electrical installaTIon engineering - cable line construction and acceptance criteria 电气装置安装工程-电缆线路施工及验收标准 |
China National Standards TI |
English PDF |
GB/T 37231-2018 |
SpecificaTIon for forensic identification of stamp impression 印章印文鉴定技术规范 |
China National Standards TI |
English PDF |
GB/T 37232-2018 |
SpecificaTIon for forensic examination of printed document 印刷文件鉴定技术规范 |
China National Standards TI |
English PDF |
GB/T 51238-2018 |
Basic technical standards for building foundaTIons in karst areas 岩溶地区建筑地基基础技术标准 |
China National Standards TI |
English PDF |
GB/T 37045-2018 |
InformaTIon technology — Biometrics—Fingerprint processing chip technical requirements 信息技术-生物特征识别-指纹处理芯片技术要求 |
China National Standards TI |
English PDF |
GB 51304-2018 |
Small hydropower staTIon construction safety standard 小型水电站施工安全标准 |
China National Standards TI |
English PDF |
GB/T 37233-2018 |
SpecificaTIon for forensic examination of document formation time 文件制作时间鉴定技术规范 |
China National Standards TI |
English PDF |
GB/T 37234-2018 |
General specificaTIon for forensic document examination 文件鉴定通用规范 |
China National Standards TI |
English PDF |
Find out:39883Items | To Page of: First -Previous-Next -Last | [89] [90] [91] [92] [93] [94] [95] |