GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19915.4-2005 |
Quick Tri-PCR detection techniques for pathogenic Streptococcus suis type 猪链球菌2型三重PCR检测方法 |
China National Standards Tri |
English PDF |
GB/T 5170.18-2005 |
Inspection methods for basic parameters of Environmental testing equipments for elecTric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 |
China National Standards Tri |
English PDF |
GB/T 2424.2-2005 |
Environmental Testing for elecTric and electronic products -- Guidance for damp heat tests 电工电子产品环境试验 湿热试验导则 |
China National Standards Tri |
English PDF |
GB/T 10762-2005 |
Method of mass measurement for indusTrial and mining electric locomotive 工矿电机车重量测定方法 |
China National Standards Tri |
English PDF |
GB/T 12225-2005 |
General purpose indusTrial valves-Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards Tri |
English PDF |
GB/T 12224-2005 |
General requirements for indusTrial steel valves 钢制阀门 一般要求 |
China National Standards Tri |
English PDF |
GB/T 10598.2-2005 |
IndusTrial test method of open-cut mine rotary blast hole drill 露天矿用牙轮钻机和旋转钻机 工业试验方法 |
China National Standards Tri |
English PDF |
GB/T 1695-2005 |
Rubber,vulcanized -- Determination of elecTrical breakdown strength and voltage resistant at commercial power frequency 硫化橡胶 工频击穿电压强度和耐电压的测定方法 |
China National Standards Tri |
English PDF |
GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductomeTric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards Tri |
English PDF |
GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractomeTric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法 |
China National Standards Tri |
English PDF |
GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the tiTrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards Tri |
English PDF |
GB 5226.4-2005 |
Safety of machinery-ElecTrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems 机械安全 机械电气设备 第31部分:缝纫机、缝制单元和缝制系统的特殊安全和EMC要求 |
China National Standards Tri |
English PDF |
GB 5226.3-2005 |
Sefety of machinery-EleTrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分:电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards Tri |
English PDF |
GB/T 6147-2005 |
Test method for thermoelecTric power of precision resistance alloys 精密电阻合金热电动势率 测试方法 |
China National Standards Tri |
English PDF |
GB/T 19903.1-2005 |
IndusTrial automation systems and integration-Physical device control-Data model for computerized numerical controllers-Part 1:Overview and fundamental principles 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第1部分:概述和基本原理 |
China National Standards Tri |
English PDF |
GB/T 19902.2-2005 |
IndusTrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 2:Profiling methodology 工业自动化系统与集成--制造软件互操作性能力建规 第2部分:建规方法论 |
China National Standards Tri |
English PDF |
GB/T 19902.1-2005 |
IndusTrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 1:Framework 工业自动化系统与集成--制造软件互操作性能力建规 第1部分:框架 |
China National Standards Tri |
English PDF |
GB/T 19898-2005 |
IndusTrial-Process measurement and control-Documentation of application software 工业过程测量和控制 应用软件文档集 |
China National Standards Tri |
English PDF |
GB/T 19870-2005 |
IndusTrial inspecting thermal imagers 工业检测型红外热像仪 |
China National Standards Tri |
English PDF |
GB/T 17214.4-2005 |
Operating conditions for indusTrial-process measurement and control equipment Part 4:Corrosive and erosive influences 工业过程测量和控制装置的工作条件 第4部分:腐蚀和侵蚀影响 |
China National Standards Tri |
English PDF |
GB/T 17214.2-2005 |
Operating conditions for indusTrial-process measurement and control equipment Part 2:Power 工业过程测量和控制装置的工作条件 第2部分:动力 |
China National Standards Tri |
English PDF |
GB/T 17213.9-2005 |
IndusTrial-process control valves Part 2-3:Flow capacity-Test procedures 工业过程控制阀 第2-3部分:流通能力 试验程序 |
China National Standards Tri |
English PDF |
GB/T 17213.6-2005 |
IndusTrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards Tri |
English PDF |
GB/T 17213.4-2005 |
IndusTrial-process control valves Part 4:Inspection and routine testing 工业过程控制阀 第4部分:检验和例行试验 |
China National Standards Tri |
English PDF |
GB/T 17213.3-2005 |
IndusTrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分:尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards Tri |
English PDF |
GB/T 17213.2-2005 |
IndusTrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards Tri |
English PDF |
GB/T 17213.16-2005 |
IndusTrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards Tri |
English PDF |
GB/T 17213.15-2005 |
IndusTrial-process control valves Part 8-3:Noise considerations-Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分:噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards Tri |
English PDF |
GB/T 17213.14-2005 |
IndusTrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards Tri |
English PDF |
GB/T 17213.13-2005 |
IndusTrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分:定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards Tri |
English PDF |
GB/T 17213.12-2005 |
IndusTrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves 工业过程控制阀 第3-3部分:尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards Tri |
English PDF |
GB/T 17213.11-2005 |
IndusTrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves 工业过程控制阀 第3-2部分:尺寸 角行程控制阀(蝶阀除外)的端面距 |
China National Standards Tri |
English PDF |
GB/T 17213.10-2005 |
IndusTrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards Tri |
English PDF |
GB/T 16656.502-2005 |
IndusTrial automation systems and integration Product data representation and exchange Part 502:Application interpreted construct:Shell-based wireframe 工业自动化系统与集成 产品数据表达与交换 第502部分:应用解释构:基于壳的线框 |
China National Standards Tri |
English PDF |
GB/T 16656.501-2005 |
IndusTrial automation systems and integration Product data representation and exchange Part 501:Application interpreted construct:Edge-based wireframe 工业自动化系统与集成 产品数据表达与交换 第501部分:应用解释构造:基于边的线框 |
China National Standards Tri |
English PDF |
GB 19865-2005 |
ElecTric toys-Safety 电玩具的安全 |
China National Standards Tri |
English PDF |
GB 8031-2005 |
IndusTrial electric detonator 工业电雷管 |
China National Standards Tri |
English PDF |
GB 6222-2005 |
Safety code for gas of indusTrial enterprises 工业企业煤气安全规程 |
China National Standards Tri |
English PDF |
GB/T 13085-2005 |
Determination of niTrite in feeds-Method using colorimetric analysis 饲料中亚硝酸盐的测定-比色法 |
China National Standards Tri |
English PDF |
GB 4706.1-2005 |
Household and similar elecTrical appliances-Safety Part 1:General requirements 家用和类似用途电器的安全 第1部分:通用要求 |
China National Standards Tri |
English PDF |
GB/T 5585.2-2005 |
Copper or aluminium and its alloy bus bars for elecTrical purposes Part 2:Aluminium and aluminium alloy bus bars 电工用铜、铝及其合金母线 第2部分:铝和铝合金母线 |
China National Standards Tri |
English PDF |
GB/T 5585.1-2005 |
Copper or aluminium and its alloy bus bars for elecTrical purposes Part 1:Copper and copper alloy bus bars 电工用铜、铝及其合金母线 第1部分:铜和铜合金母线 |
China National Standards Tri |
English PDF |
GB/T 5170.20-2005 |
Inspection methods for basic parameters of Environmental testing equipments for elecTric and electronic products Water testing equipments 电工电子产品环境试验设备 基本参数检定方法 水试验设备 |
China National Standards Tri |
English PDF |
GB/T 5170.19-2005 |
Inspection methods for basic parameters of Environmental testing equipments for elecTric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备 |
China National Standards Tri |
English PDF |
GB/T 5170.17-2005 |
Inspection methods for basic parameters of Environmental testing equipments for elecTric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 |
China National Standards Tri |
English PDF |
GB/T 4797.2-2005 |
Environmental conditions for elecTric and electronic products appearing in nature Part 2:Altitude and air pressure,deepness and water pressure 电工电子产品自然环境条件 第2部分:海拔与气压、水深与水压 |
China National Standards Tri |
English PDF |
GB/T 2900.22-2005 |
Electrotechnical terminology ElecTric welding machine 电工名词术语 电焊机 |
China National Standards Tri |
English PDF |
GB/T 2423.36-2005 |
Environmental testing for elecTric and electronic products Part 2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分:试验方法 试验Z/BFc:散热和非散热试验样品的高温/振动(正弦)综合试验 |
China National Standards Tri |
English PDF |
GB/T 2423.35-2005 |
Environmental testing for elecTric and electronic products Part 2:Tests Tests Z/Afc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分:试验方法 试验Z/AFc:散热和非散热试验样品的低温/振动(正弦)综合试验 |
China National Standards Tri |
English PDF |
GB/T 2423.28-2005 |
Basic environmental testing procedures for elecTric and electronic products-Part2:Test methods-Test T:Soldering 电工电子产品环境试验 第2部分:试验方法 试验T:锡焊 |
China National Standards Tri |
English PDF |
GB/T 2423.27-2005 |
Environmental testing for elecTric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test 电工电子产品环境试验 第2部分:试验方法 试验Z/AMD:低温/低气压/湿热连续综合试验 |
China National Standards Tri |
English PDF |
GB/T 14598.17-2005 |
ElecTrical relay-Part 22-6:Electrical disturbance tests for measuring relays and protection equipment-Immunity to conducted disturbances induced by radio frequency fields 电气继电器 第22-6部分:量度继电器和保护装置的电气骚扰试验-射频场感应的传导骚扰的抗扰度 |
China National Standards Tri |
English PDF |
GB/T 10761-2005 |
General requirements for tropical elecTrical micro-machine 热带微电机基本技术要求 |
China National Standards Tri |
English PDF |
GB/T 10593.1-2005 |
Measuring methods of environmental parameters for elecTric and electronic products Part 1:Vibration 电工电子产品环境参数测量方法 第1部分:振 动 |
China National Standards Tri |
English PDF |
GB 3883.17-2005 |
Safety of hand-held motor-operated elecTric tools Part 2:Particular requirements for routers and trimmers 手持式电动工具的安全 第2部分:木铣和修边机的专用要求 |
China National Standards Tri |
English PDF |
GB 14536.17-2005 |
Automatic elecTrical controls for household and similar use Part 2:particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications 家用和类似用途电自动控制器 第2部分:锅炉器具中使用的浮子型或电极敏感型水位敏感电自动控制器的特殊要求 |
China National Standards Tri |
English PDF |
GB 10963.1-2005 |
ElecTrical accessories-Circuit-breakers for overcurrent protection for household and similar installation Part 1:Circuit-breakers for a.c.operation 电气附件-家用及类似场所用过电流保护断路器 第1部分:用于交流的断路器 |
China National Standards Tri |
English PDF |
GB 19854-2005 |
General rules of explosion-proof techniques of indusTrial trucks for explosive atmospheres 爆炸性环境用工业车辆防爆技术通则 |
China National Standards Tri |
English PDF |
GB 16895.26-2005 |
ElecTrical installations of buildings-Part 7-740:Requirements for special installations or locations-structures,amusement devices and booths at fairgrounds,amusement parks and circuses 建筑物电气装置 第7-740部分:特殊装置或场所的要求-游乐场和马戏场中的构筑物、娱乐设施和棚屋 |
China National Standards Tri |
English PDF |
GB 16895.25-2005 |
ElecTrical installations of buildings-Part 7-711:Requirements for special installations or locations-Exhibitions,shows and stands 建筑物电气装置 第7-711部分:特殊装置或场所的要求-展览馆、陈列室和展位 |
China National Standards Tri |
English PDF |
GB 16895.24-2005 |
ElecTrical installations of buildings-Part 7-710:Requirements for special installations or locations-Medical locations 建筑物电气装置 第7-710部分:特殊装置或场所的要求-医疗场所 |
China National Standards Tri |
English PDF |
GB 16895.2-2005 |
ElecTrical installations of buildings-Part 4-42:Protection for safety-Protection against Thermal effects 建筑物电气装置 第4-42部分:安全防护-热效应保护 |
China National Standards Tri |
English PDF |
GB/T 16977-2005 |
IndusTrial robots Coordinate systems and motion nomenclatures 工业机器人 坐标系和运动命名原则 |
China National Standards Tri |
English PDF |
GB/T 3884.11-2005 |
Methods for chemical analysis of copper concentrates-Determination of mercury content-Cold atomic absorption spectromeTric method 铜精矿化学分析方法 汞量的测定 冷原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 2056-2005 |
Copper、zinc、cadmium、nickel、tin anode sheets for elecTric plating 电镀用铜、锌、镉、镍、锡阳极板 |
China National Standards Tri |
English PDF |
GB/T 19839-2005 |
General specification for indusTrial oil and gas burners 工业燃油燃气燃烧器通用技术条件 |
China National Standards Tri |
English PDF |
GB/T 13748.6-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of silver content Flame atomic absorption spectrophotomeTric method 镁及镁合金化学分析方法 银含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 13748.5-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of ytTrium content Inductively coupled plasma atomic emission spectrometric method 镁及镁合金化学分析方法 钇含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards Tri |
English PDF |
GB/T 13748.3-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of lithium content Flame atomic absorption spectromeTric method 镁及镁合金化学分析方法 锂含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 13748.2-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of tin content Pyrocatechol violet spectrophotomeTric method 镁及镁合金化学分析方法 锡含量的测定 邻苯二酚紫分光光度法 |
China National Standards Tri |
English PDF |
GB/T 13748.19-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of titanium content Diantipyrylmethane spectrophotomeTric method 镁及镁合金化学分析方法 钛含量的测定 二安替比啉甲烷分光光度法 |
China National Standards Tri |
English PDF |
GB/T 13748.18-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of chlorine content Silver chlorine turbidimeTric method 镁及镁合金化学分析方法 氯含量的测定 氯化银浊度法 |
China National Standards Tri |
English PDF |
GB/T 13748.17-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of kalium content and naTrium content Flame atomic absorption spectrophotometric method 镁及镁合金化学分析方法 钾含量和钠含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 13748.16-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of calcium content Flame atomic absorption spectromeTric method 镁及镁合金化学分析方法 钙含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 13748.13-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of lead content Flame atomic absorption spectrophotomeTric method 镁及镁合金化学分析方法 铅含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 13748.11-2005 |
Chemical analysis methods of magnesium and magnesium alloys Determination of beryllium content Solochrome cyanine R spectrophotomeTric method 镁及镁合金化学分析方法 铍含量的测定 依莱铬氰蓝R分光光度法 |
China National Standards Tri |
English PDF |
GB/T 6730.62-2005 |
Iron ores-Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content Wavelength dispersive X-ray fluorescence spectromeTric method 铁矿石 钙、硅、镁、钛、磷、锰、铝和钡含量的测定 波长色散X射线荧光光谱法 |
China National Standards Tri |
English PDF |
GB/T 6730.60-2005 |
Iron ores-Determination of nickel content-Flame atomic absorption spectromeTric method 铁矿石 镍含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 6730.59-2005 |
Iron ores-Determination of manganese content-Flame atomic absorption spectromeTric method 铁矿石 锰含量的测定 火焰原子吸收光谱法 |
China National Standards Tri |
English PDF |
GB/T 3524-2005 |
Hot-rolled carbon and low alloy structural steel sTrips 碳素结构钢和低合金结构钢热轧钢带 |
China National Standards Tri |
English PDF |
GB/T 3273-2005 |
Hot-rolled steel plates(sheets)and sTrips for automobile frames 汽车大梁用热轧钢板和钢带 |
China National Standards Tri |
English PDF |
GB/T 11354-2005 |
Determination of niTrided case depth and metallographic microstructure examination for steel iron parts 钢铁零件 渗氮层深度测定和金相组织检验 |
China National Standards Tri |
English PDF |
GB 50140-2005 |
Code for design of extinguisher disTribution in buildings 建筑灭火器配置设计规范 |
China National Standards Tri |
English PDF |
GB/T 4094.2-2005 |
ElecTric vehicles-Symbols for control,indicators,and telltales 电动汽车操纵件、批示器及信号装置的标志 |
China National Standards Tri |
English PDF |
GB/T 19836-2005 |
Instrumentation for elecTric vehicles 电动汽车用仪表 |
China National Standards Tri |
English PDF |
GB/T 18386-2005 |
ElecTric vehicles Energy consumption and range Test procedures 电动汽车 能量消耗率和续驶里程 试验方法 |
China National Standards Tri |
English PDF |
GB/T 18385-2005 |
ElecTric vehicles Power performance Test method 电动汽车 动力性能 试验方法 |
China National Standards Tri |
English PDF |
GB/T 7779-2005 |
The model designation of cenTrifuges 离心机 型号编制方法 |
China National Standards Tri |
English PDF |
GB/T 19843-2005 |
IndusTrial fan-performance testing of jet fans 工业通风机 射流风机的性能试验 |
China National Standards Tri |
English PDF |
GB/T 14043-2005 |
Hydraulic fluid power-Code for identification of valve mounting surfaces and carTridge valve cavities 液压传动 阀安装面和插装阀阀孔的标识代号 |
China National Standards Tri |
English PDF |
GB/T 12232-2005 |
General purpose indusTrial valves Flanged iron gate valves 通用阀门 法兰连接铁制闸阀 |
China National Standards Tri |
English PDF |
GB/T 12230-2005 |
General purpose indusTrial valves-Specification of stainless steel castings 通用阀门 不锈钢铸件技术条件 |
China National Standards Tri |
English PDF |
GB/T 12229-2005 |
General Purpose indusTrial valves-Specification of carbon steel castings 通用阀门 碳素钢铸件技术条件 |
China National Standards Tri |
English PDF |
GB/T 12227-2005 |
General purpose indusTrial valve-Specification of spheroidal graphite iron castings 通用阀门 球墨铸铁件技术条件 |
China National Standards Tri |
English PDF |
GB/T 12226-2005 |
General purpose indusTrial valve-Specification of flake graphite iron castings 通用阀门 灰铸铁件技术条件 |
China National Standards Tri |
English PDF |
GB/T 10901-2005 |
Methods of Performance testing for cenTrifuge 离心机 性能测试方法 |
China National Standards Tri |
English PDF |
GB/T 19832-2005 |
Petroleum and natural gas indusTries-Drilling and production equipment-Inspection,maintenance,repair and remanufacture of hoisting equipment 石油天然气工业 钻井和采油提升设备的检验、维护、修理和改造 |
China National Standards Tri |
English PDF |
GB/T 19831.1-2005 |
Petroleum and natural gas indusTries-Casing centralizers-Part 1:Bow-spring casing centralizers 石油天然气工业 套管扶正器 第1部分 弓形弹簧套管扶正器 |
China National Standards Tri |
English PDF |
GB/T 19829.2-2005 |
Petroleum and natural gas indusTries-Life cycle costing-Part 2:Guidance on application of methodology and calculation methods 石油天然气工业 寿命周期费用分析 第2部分:方法论和计算方法应用指南 |
China National Standards Tri |
English PDF |
GB/T 19829.1-2005 |
Petroleum and natural gas indusTries-Life cycle costing-Part 1:Methodology 石油天然气工业 寿命周期费用分析 第1部分:方法论 |
China National Standards Tri |
English PDF |
Find out:7906Items | To Page of: First -Previous-Next -Last | [59] [60] [61] [62] [63] [64] [65] |