GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 6730.64-2007 |
Iron ores - Determination of Water soluble chloride content - Ion-selective electrode method 铁矿石 水溶性氯化物含量的测定 离子选择电极法 |
China National Standards W |
English PDF |
GB/T 3274-2007 |
Hot-rolled plates and strips of carbon structural steels and high strength loW alloy structural steels 碳素结构钢和低合金结构钢热轧厚钢板和钢带 |
China National Standards W |
English PDF |
GB/T 21073-2007 |
Epoxy-coated seven-Wire prestressing steel strand 环氧涂层七丝预应力钢绞线 |
China National Standards W |
English PDF |
GB/T 21069-2007 |
Natural gas - Determination of Water content at high pressure 天然气 高压下水含量的测定 |
China National Standards W |
English PDF |
GB/T 21055-2007 |
Assistive devices of car manipulation for persons With physical disabilities 肢体残疾人驾驶汽车的操纵辅助装置 |
China National Standards W |
English PDF |
GB/T 6911-2007 |
Water for industrial circulating cooling system and boiler - Determination of sulfate 工业循环冷却水和锅炉用水中硫酸盐的测定 |
China National Standards W |
English PDF |
GB/T 5553-2007 |
Surface active agents - Determination of Water repellency of waterprooting agents 表面活性剂 防水剂 防水力测定法 |
China National Standards W |
English PDF |
GB/T 21059-2007 |
Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer With defined shear rate 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 |
China National Standards W |
English PDF |
GB/T 21056-2007 |
Specification for adjustable speed drive systems of electricity conservation With VF for fans and pumps 风机、泵类负载变频调速节电传动系统及其应用技术条件 |
China National Standards W |
English PDF |
GB/T 16497-2007 |
Surface active agents - Determination of storage stability of Water-in-oil emulsion 表面活性剂 油包水乳液贮藏稳定性的测定 |
China National Standards W |
English PDF |
GB/T 14637-2007 |
Industrial circulating cooling Water and scale-Determination of copper,zinc-Atomic absorption spectrometric method 工业循环冷却水及水垢中铜、锌的测定 原子吸收光谱法 |
China National Standards W |
English PDF |
GB/T 14636-2007 |
Industrial circulating cooling Water - Determination of calcium, magnesium - Atomic absorption spectrometric method 工业循环冷却水中钙、镁含量的测定 原子吸收光谱法 |
China National Standards W |
English PDF |
GB/T 14415-2007 |
Water for industrial circulating cooling system and boiler - Determination of solids matter 工业循环冷却水和锅炉用水中固体物质的测定 |
China National Standards W |
English PDF |
GB/T 13689-2007 |
Water for industrial circulating cooling system and boiler - Determination of copper 工业循环冷却水和锅炉用水中铜的测定 |
China National Standards W |
English PDF |
GB/T 12763.4-2007 |
Specifications for oceanographic survey - Part 4: Survey of chemical parameters in sea Water 海洋调查规范 第4部分: 海水化学要素调查 |
China National Standards W |
English PDF |
GB/T 12157-2007 |
Water for industrial circulating cooling system and boiler -Determination of dissolved oxygen 工业循环冷却水和锅炉用水中溶解氧的测定 |
China National Standards W |
English PDF |
GB/T 12152-2007 |
Water for boiler and cooling system-Determination of mineral oil 锅炉用水和冷却水中油含量的测定 |
China National Standards W |
English PDF |
GB/T 12149-2007 |
Water for industrial circulating cooling system and boiler - Determination of silica 工业循环冷却水和锅炉用水中硅的测定 |
China National Standards W |
English PDF |
GB/T 11275-2007 |
Surface active agents - Determination of Water content 表面活性剂 含水量的测定 |
China National Standards W |
English PDF |
GB/T 5169.14-2007 |
Fire hazard testing for electric and eletronic products - Part 14: Test flames-1kW nominal pre-mixed flame - Apparatus,confirmatory test arrangement 电工电子产品着火危险试验 第14部分:试验火焰 1kW标称预混合型火焰 设备、确认试验方法和导则 |
China National Standards W |
English PDF |
GB/T 20432.2-2007 |
Photography - Photographic-grade chemicals - Test methods - Part 2: Determination of matter insoluble in Water 摄影 照相级化学品 试验方法 第2部分:水不溶物的测定 |
China National Standards W |
English PDF |
GB/T 6476-2007 |
Surface grinding machines With vertical grinding wheel spindle and reciprocating table - Testing of the accuracy 立轴矩台平面磨床 精度检验 |
China National Standards W |
English PDF |
GB/T 6139-2007 |
Subland tWist drills - Technical specifications 阶梯麻花钻 技术条件 |
China National Standards W |
English PDF |
GB/T 5288-2007 |
SlideWays grinding machines with two columns - Testing of the accuracy 龙门导轨磨床 精度检验 |
China National Standards W |
English PDF |
GB/T 4682-2007 |
Internal cylindrical grinding machines With horizontal spindle - Testing of the accuracy 内圆磨床 精度检验 |
China National Standards W |
English PDF |
GB/T 4022.1-2007 |
Surface grinding machines With horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1:Machines with a table surface length of up to 1600 mm 卧轴矩台平面磨床 精度检验 第1部分:工作台面长度至1600mm的机床 |
China National Standards W |
English PDF |
GB/T 21020-2007 |
Metal cutting tools - Terms in circular screWing dies 金属切削刀具 圆板牙术语 |
China National Standards W |
English PDF |
GB/T 21016-2007 |
Technical specifications for Wheat drying 小麦干燥技术规范 |
China National Standards W |
English PDF |
GB/T 21013-2007 |
Machine tools - Mounting of plain grinding Wheels by means of hub flanges 机床 紧固平砂轮用砂轮卡盘 |
China National Standards W |
English PDF |
GB/T 2075-2007 |
Classification and application of hard cutting materials for metal removal With defined cutting edges ― Designation of the main groups and groups of application 切削加工用硬切削材料的分类和用途 大组和用途小组的分类代号 |
China National Standards W |
English PDF |
GB/T 16462.1-2007 |
Test conditions for numerically controlled turning machines and turning centers - Part 1: Geometric test for machines With a horizontal workholding spindle 数控车床和车削中心检验条件 第1部分:卧式机床几何精度检验 |
China National Standards W |
English PDF |
GB/T 14300-2007 |
Straight flute drill With indexable inserts 可转位直沟浅孔钻 |
China National Standards W |
English PDF |
GB/T 14299-2007 |
Spiral flute drill With indexable inserts 可转位螺旋沟浅孔钻 |
China National Standards W |
English PDF |
GB/T 1127-2007 |
Woodruff keyseat cutters 半圆键槽铣刀 |
China National Standards W |
English PDF |
GB/T 9086-2007 |
The White standard plate for colorimetry and photometry 用于色度和光度测量的标准白板 |
China National Standards W |
English PDF |
GB 21011-2007 |
Mine manriding cars With narrow gauge - Safety requirements 矿用人车 安全要求 |
China National Standards W |
English PDF |
GB 21008-2007 |
Aerial ropeWays for underground mine - Safety requirements 地下矿用架空索道 安全要求 |
China National Standards W |
English PDF |
GB/T 20999-2007 |
Data communication protocol betWeen traffic signal controller and control center 交通信号控制机与上位机间的数据通信协议 |
China National Standards W |
English PDF |
GB/T 20897.2-2007 |
Inflatable boats - Part 2: Boats With a maximum motor power rating of 4.5 kW to 15 kW inclusive 充气艇 第2部分: 发动机最大额定功率为4.5kW~15kW的艇 |
China National Standards W |
English PDF |
GB/T 11869-2007 |
ToWing winches for deep sea use 远洋船用拖曳绞车 |
China National Standards W |
English PDF |
GB/T 4798.4-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 4: Stationary use at non-Weather-protected locations 电工电子产品应用环境条件 第4部分:无气候防护场所固定使用 |
China National Standards W |
English PDF |
GB/T 4798.3-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 3: Stationary use at Weather-protected locations 电工电子产品应用环境条件 第3部分:有气候防护场所固定使用 |
China National Standards W |
English PDF |
GB 2585-2007 |
Hot-rolled steel rails for railWay 铁路用热轧钢轨 |
China National Standards W |
English PDF |
GB/T 20982.3-2007 |
Textile machinery and accessories - Weaving machines - Part 3: Parts of the machine - Vocabulary 纺织机械与附件 织机 第3部分:织机零部件 词汇 |
China National Standards W |
English PDF |
GB/T 20982.2-2007 |
Textile machinery and accessories - Weaving machines - Part 2: Accessories - Vocabulary 纺织机械与附件 织机 第2部分:附件 词汇 |
China National Standards W |
English PDF |
GB 9706.6-2007 |
Medical electrical equipment - Part 2:Particular requirements for the safety of microWave therapy equipment 医用电气设备 第二部分:微波治疗设备安全专用要求 |
China National Standards W |
English PDF |
GB/T 20966-2007 |
Determination of particle size distribution for colliery poWders 煤矿粉尘粒度分布测定方法 |
China National Standards W |
English PDF |
GB/T 878-2007 |
Slotted headless screWs with shank 开槽无头螺钉 |
China National Standards W |
English PDF |
GB/T 80-2007 |
hexagon socket set screWs with cup point 内六角凹端紧定螺钉 |
China National Standards W |
English PDF |
GB/T 79-2007 |
Hexagon socket set screWs with dog point 内六角圆柱端紧定螺钉 |
China National Standards W |
English PDF |
GB/T 78-2007 |
Hexagon socket set screWs with cone point 内六角锥端紧定螺钉 |
China National Standards W |
English PDF |
GB/T 77-2007 |
Hexagon socket set screWs with flat point 内六角平端紧定螺钉 |
China National Standards W |
English PDF |
GB/T 2673-2007 |
hexalobular socket countersunk head screWs 内六角花形沉头螺钉 |
China National Standards W |
English PDF |
GB/T 20968-2007 |
Non-destructive testing - Aids to visual inspection - Selection of loW-power magnifiers 无损检测 目视检测辅助工具 低倍放大镜的选用 |
China National Standards W |
English PDF |
GB/T 14041.2-2007 |
Hydraulic fluid poWer - Filter elements - Verification of material compatibility with fluids 液压滤芯 材料与液体相容性检验方法 |
China National Standards W |
English PDF |
GB/T 21039.1-2007 |
Semiconductor devices - Discrete devices - Part 4-1: MicroWave diodes and transistors - Microwave field effect transistors - Blank detail specification 半导体器件 分立器件 第4-1部分:微波二极管和晶体管 微波场效应晶体管空白详细规范 |
China National Standards W |
English PDF |
GB/T 21026-2007 |
Specification for Chinese office softWare application programming interface 中文办公软件应用编程接口规范 |
China National Standards W |
English PDF |
GB/T 18311.31-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled poWer ratio measurement for fibre optic sources 纤维光学互连器件和无源器件 基本试验和测量程序 第3-31部分:检查和测量 纤维光学光源耦合功率比测量 |
China National Standards W |
English PDF |
GB/T 18311.26-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of the angular misalignment betWeen fibre and ferrule axes 纤维光学互连器件和无源器件 基本试验和测量程序 第3-26部分:检查和测量 光纤和插针轴线间的角偏差的测量 |
China National Standards W |
English PDF |
GB/T 15160-2007 |
Land mobile communication system requirements using multi-channel access techniques Without a central controller 无中心多信道选址移动通信系统体制 |
China National Standards W |
English PDF |
GB/T 15157.14-2007 |
Connectors for frequencies beloW 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards W |
English PDF |
GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors With inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分:外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards W |
English PDF |
GB/T 20991-2007 |
Personal protective equipment - Test methods for footWear 个体防护装备 鞋的测试方法 |
China National Standards W |
English PDF |
GB 7059-2007 |
Safety requirements for portable Wood ladders 便携式木折梯安全要求 |
China National Standards W |
English PDF |
GB/T 8243.12-2007 |
Methods of test for full-floW lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 |
China National Standards W |
English PDF |
GB/T 8243.11-2007 |
Methods of test for full-floW lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器 |
China National Standards W |
English PDF |
GB/T 7927-2007 |
Method of vibration measurement for Walking tractors 手扶拖拉机 振动测量方法 |
China National Standards W |
English PDF |
GB/T 6229-2007 |
Test methods for Walking tractors 手扶拖拉机 试验方法 |
China National Standards W |
English PDF |
GB/T 6138.2-2007 |
Subland tWist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分:莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards W |
English PDF |
GB/T 6138.1-2007 |
Subland tWist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分:直柄阶梯麻花钻的型式和尺寸 |
China National Standards W |
English PDF |
GB/T 4127.9-2007 |
Bonded abrasive products - Dimensions - Part 9: Grinding Wheels for high-pressure grinding 固结磨具 尺寸 第9部分:重负荷磨削砂轮 |
China National Standards W |
English PDF |
GB/T 4127.8-2007 |
Bonded abrasive products - Dimensions - Part 8: Grinding Wheels for deburring and fettling/snagging 固结磨具 尺寸 第8部分:去毛刺、荒磨和粗磨用砂轮 |
China National Standards W |
English PDF |
GB/T 4127.3-2007 |
Bonded abrasive products - Dimensions - Part 3: Grinding Wheels for internal cylindrical grinding 固结磨具 尺寸 第3部分:内圆磨砂轮 |
China National Standards W |
English PDF |
GB/T 4127.2-2007 |
Bonded abrasive products - Dimensions - Part 2: Grinding Wheels for centreless external cylindrical grinding 固结磨具 尺寸 第2部分:无心外圆磨砂轮 |
China National Standards W |
English PDF |
GB/T 4127.16-2007 |
Bonded abrasive products - Dimensions - Part 16: Grinding Wheels for cutting-off on hand held power tools 固结磨具 尺寸 第16部分:手持式电动工具用切割砂轮 |
China National Standards W |
English PDF |
GB/T 4127.15-2007 |
Bonded abrasive products - Dimensions - Part 15: Grinding Wheels for cutting-off on stationary or mobile cutting-off machines 固结磨具 尺寸 第15部分:固定式或移动式切割机用切割砂轮 |
China National Standards W |
English PDF |
GB/T 4127.1-2007 |
Bonded abrasive products - Dimensions - Part 1: Grinding Wheels for external cylindrical grinding between centres 固结磨具 尺寸 第1部分:外圆磨砂轮(工件装夹在顶尖间) |
China National Standards W |
English PDF |
GB/T 3044-2007 |
Chemical analysis methods for White fused alumina and pink fused alumina 白刚玉、铬刚玉 化学分析方法 |
China National Standards W |
English PDF |
GB/T 2778-2007 |
PoWer take-off pulley for agricultural tractors - Peripheral speed and width 农业拖拉机动力输出皮带轮 圆周速度和宽度 |
China National Standards W |
English PDF |
GB/T 20971-2007 |
Petroleum and natural gas industries - Equipment for Well cementing - Performance testing of cementing float equipment 石油天然气工业 固井设备 注水泥浮动装置性能测试 |
China National Standards W |
English PDF |
GB/T 20958.2-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines With vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 |
China National Standards W |
English PDF |
GB/T 20958.1-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines With horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 |
China National Standards W |
English PDF |
GB/T 20957.5-2007 |
Test conditions of precision machining centres - Part 5: Tests for accuracy and repeatability of positioning of Work-holding pallets 精密加工中心检验条件 第5部分:工件夹持托板的定位精度和重复定位精度检验 |
China National Standards W |
English PDF |
GB/T 20957.2-2007 |
Test conditions for machining centres - Part 2: Geometric tests for machines With vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 精密加工中心检验条件 第2部分:立式或带垂直主回转轴的万能主轴头机床 几何精度检验(垂直Z轴) |
China National Standards W |
English PDF |
GB/T 20957.1-2007 |
Test conditions for precision machining centres - Part 1: Geometric tests for machines With horizontal spindle and with accessory heads (horizontal Z axis) 精密加工中心检验条件 第1部分:卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards W |
English PDF |
GB/T 20954-2007 |
Metal cutting tools - Terms in tWist drills 金属切削刀具 麻花钻术语 |
China National Standards W |
English PDF |
GB/T 20949-2007 |
Prescription for installation of the lighting and light-signalling devices for Wheeled agricultural and forestry tractors 农林轮式拖拉机 照明和灯光信号装置的安装规定 |
China National Standards W |
English PDF |
GB/T 20948-2007 |
Rear-vieW mirrors requirements for agricultural and forestry tractors 农林拖拉机 后视镜技术要求 |
China National Standards W |
English PDF |
GB/T 15833-2007 |
Test methods for forestry Wheeled tractors and crawler tractors 林业轮式和履带拖拉机 试验方法 |
China National Standards W |
English PDF |
GB/T 15832-2007 |
General requirement of forestry Wheeled tractors and crawler tractors 林业轮式和履带拖拉机 通用技术条件 |
China National Standards W |
English PDF |
GB/T 15112-2007 |
Shaft sinking Winch 凿井绞车 |
China National Standards W |
English PDF |
GB/T 1147.2-2007 |
Small and medium poWer internal combustion engines - Part 2: Test methods 中小功率内燃机 第2部分:试验方法 |
China National Standards W |
English PDF |
GB/T 1147.1-2007 |
Small and medium poWer internal combustion engines - Part 1:General requirements 中小功率内燃机 第1部分:通用技术条件 |
China National Standards W |
English PDF |
GB/T 11835-2007 |
Rock Wool , slag wool and it’s products for thermal insulation 绝热用岩棉、矿渣棉及其制品 |
China National Standards W |
English PDF |
GB 50226-2007 |
Code for design of railWay passenger station buildings 铁路旅客车站建筑设计规范(2011年版) |
China National Standards W |
English PDF |
GB 50421-2007 |
Code for Waste dump design of nonferrous metal mines 有色金属矿山排土场设计规范 |
China National Standards W |
English PDF |
GB/Z 20996.2-2007 |
Performance of high-voltage direct current(HVDC)systems - Part 2: Faults and sWitching 高压直流系统的性能 第2部分:故障和操作 |
China National Standards W |
English PDF |
GB/T 20995-2007 |
PoWer electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators 输配电系统的电力电子技术 静止无功补偿装置用晶闸管阀的试验 |
China National Standards W |
English PDF |
GB/T 20990.1-2007 |
Thyristor valves for high voltage direct current (HVDC) poWer transmission - Part 1: Electrical testing 高压直流输电晶闸管阀 第1部分:电气试验 |
China National Standards W |
English PDF |
GB/T 20989-2007 |
Determination of poWer losses in high-voltage direct current (HVDC) converter stations 高压直流换流站损耗的确定 |
China National Standards W |
English PDF |
Find out:15323Items | To Page of: First -Previous-Next -Last | [113] [114] [115] [116] [117] [118] [119] |