GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 11457-2006 |
Information technology SoftWare engineering terminology 信息技术 软件工程术语 |
China National Standards W |
English PDF |
GB 12995-2006 |
Combustion-motor-driven Wheelchairs 机动轮椅车 |
China National Standards W |
English PDF |
GB/T 20405.5-2006 |
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free sWell capacity in saline solution 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率 |
China National Standards W |
English PDF |
GB/T 20132-2006 |
Ships and marine technology -- LoW-location lighting on passenger ships -- Arrangement 船舶与海上技术 客船低位照明 布置 |
China National Standards W |
English PDF |
GB/T 9998-2006 |
Xining Wool 西宁毛 |
China National Standards W |
English PDF |
GB/T 6501-2006 |
Test method for measure length of the Wool fibre - Comb sorter method 羊毛纤维长度试验方法 梳片法 |
China National Standards W |
English PDF |
GB/T 6103-2006 |
Test method for cotton defects in raW cotton - Hand 原棉疵点试验方法 手工法 |
China National Standards W |
English PDF |
GB/T 6102.1-2006 |
Test method for moisture regain in raW cotton by oven drying 原棉回潮率试验方法 烘箱法 |
China National Standards W |
English PDF |
GB/T 20199-2006 |
Surface active agents - Technical alkane sulfonates - Determination of alkane monosulfonates content by direct tWo-phase titration 表面活性剂-工业烷烃磺酸盐-烷烃单磺酸盐含量的测定(直接两相滴定法) |
China National Standards W |
English PDF |
GB 14749-2006 |
Safety requirements for baby Walking frames 婴儿学步车安全要求 |
China National Standards W |
English PDF |
GB 14748-2006 |
Safety requirements for Wheeled child conveyances 儿童推车安全要求 |
China National Standards W |
English PDF |
GB/T 5836.2-2006 |
Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and Waste inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管件 |
China National Standards W |
English PDF |
GB/T 5836.1-2006 |
Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and Waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管材 |
China National Standards W |
English PDF |
GB/T 20202-2006 |
Ethylene-vinyl acetate copolymer bloWn covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物(EVA)吹塑棚膜 |
China National Standards W |
English PDF |
GB/T 20201-2006 |
Mechanical joint fittings for use With polyethylene pressure pipes for irrigation purposes 灌溉用聚乙烯(PE)压力管机械连接管件 |
China National Standards W |
English PDF |
GB/T 10002.1-2006 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes for Water supply 给水用硬聚氯乙烯(PVC-U)管材 |
China National Standards W |
English PDF |
GB 4455-2006 |
Polyethylene bloWn covering film for agriculture 农业用聚乙烯吹塑棚膜 |
China National Standards W |
English PDF |
GB/T 6910-2006 |
Methods for analysis of Water for boiler and for cooling determination of calcium-complexometric titration 锅炉用水和冷却水分析方法 钙的测定 络合滴定法 |
China National Standards W |
English PDF |
GB/T 20153-2006 |
Classification and interpretation of neW lighting products 新型照明产品的分类与解释 |
China National Standards W |
English PDF |
GB/T 20144-2006 |
Barrel thread for E14 and E27 lampholders With shade holder ring 带灯罩环的E14和E27灯座用筒形螺纹 |
China National Standards W |
English PDF |
GB/T 12168-2006 |
Protective covers of insulating material for live Working 带电作业用遮蔽罩 |
China National Standards W |
English PDF |
GB/T 12167-2006 |
Aluminium alloy grip clamps of tension Wire for live working 带电作业用铝合金紧线卡线器 |
China National Standards W |
English PDF |
GB/T 20142-2006 |
Composite line post insulators for a.c. overhead lines With a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则 |
China National Standards W |
English PDF |
GB/T 20141-2006 |
Overhead electrical conductors - Formed Wire, concentric lay, stranded conductors 型线同心绞架空导线 |
China National Standards W |
English PDF |
GB/T 20140-2006 |
Dynamic characteristic and vibration measurement method of turbo-generators on stator Windings and evaluation criteria 透平型发电机定子绕组端部动态特性和振动试验方法及评定 |
China National Standards W |
English PDF |
GB/T 20139-2006 |
Electrical insulation systems - Thermal evaluation of modifications to an established Wire-wound EIS 电气绝缘结构-对已确定等级的散绕绕组绝缘结构进行组分调整的热评定方法 |
China National Standards W |
English PDF |
GB/T 20136-2006 |
Electric poWer plant with inernal combustion engines, general method of test for 内燃机电站通用试验方法 |
China National Standards W |
English PDF |
GB/T 12786-2006 |
Automatic electric poWer plant with internal combustion engines for general specification 自动化内燃机电站通用技术条件 |
China National Standards W |
English PDF |
GB/T 4241-2006 |
Stainless steel Wire rods for welding 焊接用不锈钢盘条 |
China National Standards W |
English PDF |
GB/T 20126-2006 |
Unalloyed steel -- Determination of loW carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) 非合金钢 低碳含量的测定 第2部分:感应炉(经预加热)内燃烧后红外吸收法 |
China National Standards W |
English PDF |
GB/T 20125-2006 |
LoW-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method 低合金钢 多元素的测定 电感耦合等离子体发射光谱法 |
China National Standards W |
English PDF |
GB/T 13632.2-2006 |
Measurements for monitoring adequate cooling Within the core of pressurized light water reactors Part 2: Instrumentation requirements during cold shutdown 监督压水堆堆芯充分冷却的测量要求 第2部分:冷停堆期间监测仪表的要求 |
China National Standards W |
English PDF |
GB/T 20119-2006 |
Flat steel Wire ropes for balance 平衡用扁钢丝绳 |
China National Standards W |
English PDF |
GB/T 20118-2006 |
Steel Wire ropes for general purpose 一般用途钢丝绳 |
China National Standards W |
English PDF |
GB 8918-2006 |
Steel Wire ropes for important purposes 重要用途钢丝绳 |
China National Standards W |
English PDF |
GB 20266-2006 |
Rubber industrial boots With chemical resistance 耐化学品的工业用橡胶靴 |
China National Standards W |
English PDF |
GB 20265-2006 |
Moulded plastics industrial boots With chemical resistance 耐化学品的工业用模压塑料靴 |
China National Standards W |
English PDF |
GB/T 9841-2006 |
Feed additive Vitamin B12 poWder (cyanocobalamin cobione) 饲料添加剂 维生素B12(氰钴胺)粉剂 |
China National Standards W |
English PDF |
GB/T 20204-2006 |
General testing specification of automatic system equipment for Water resources and hydrology 水利水文自动化系统设备检验测试通用技术规范 |
China National Standards W |
English PDF |
GB/T 20203-2006 |
Technical specification for irrigation projects With low pressure pipe conveyance 农田低压管道输水灌溉工程技术规范 |
China National Standards W |
English PDF |
GB 14681.2-2006 |
Electrically heated glazing materials for railWay rolling stock and ship Part 2: Electrically heated glazing materials for railway rolling stock 机车船舶用电加温玻璃 第2部分:机车电加温玻璃 |
China National Standards W |
English PDF |
GB 14681.1-2006 |
Electrically heated glazing materials for locomotives and ships Part 1: Heated glass panes for ships’ rectangular Windows 机车船舶用电加温玻璃 第1部分:船用矩形窗电加温玻璃 |
China National Standards W |
English PDF |
GB/T 20117-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic poWders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards W |
English PDF |
GB/T 20095-2006 |
Assessment code for performance of solar Water heating systems 太阳热水系统性能评定规范 |
China National Standards W |
English PDF |
GB/T 20110-2006 |
Hydraulic fluid poWer - Cleanliness of parts and components - Inspection document and principles related to contaminant collection,analysis and data reporting 液压传动 零件和元件的清洁度 与污染物的收集、分析和数据报告相关的检验文件和准则 |
China National Standards W |
English PDF |
GB/T 20108-2006 |
LoW temperature unitary air conditioners 低温单元式空调机 |
China National Standards W |
English PDF |
GB/T 20107-2006 |
Absorption Water chiller(heater) for villa and similar application 户用及类似用途的吸收式冷(热)水机 |
China National Standards W |
English PDF |
GB/T 10044-2006 |
Welding electrodes and rods for cast iron 铸铁焊条及焊丝 |
China National Standards W |
English PDF |
GB/T 20104-2006 |
Method for identifying tendency of coal to spontaneous combustion by oxygen absorption With chromatograph 煤自燃倾向性色谱吸氧鉴定法 |
China National Standards W |
English PDF |
GB/T 17948.3-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-Wound windings - Thermal evaluation and classification of insulation sysyems used in machines up to and including 50MVA and 15kV 旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构热评定和分级 |
China National Standards W |
English PDF |
GB/T 17948.2-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for Wire-wound windings - Classification of changes and insulation component substitutions 旋转电机绝缘结构功能性评定 散绕绕组试验规程 变更和绝缘组分替代的分级 |
China National Standards W |
English PDF |
GB/T 1409-2006 |
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at poWer, audio and radio frequencies including meter wavelengths 测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法 |
China National Standards W |
English PDF |
GB/T 3871.9-2006 |
Agricultural tractors - Test procedures - Part 9: PoWer tests for drawbar 农业拖拉机 试验规程 第9部分:牵引功率试验 |
China National Standards W |
English PDF |
GB/T 3871.3-2006 |
Agricultural tractors - Test procedures Part 3: PoWer tests for power take-off 农业拖拉机 试验规程 第3部分:动力输出轴功率试验 |
China National Standards W |
English PDF |
GB/T 3871.19-2006 |
Agricultural tractors - Test procedures - Part 19: Steering capability of Wheeled tractor 农业拖拉机 试验规程 第19部分:轮式拖拉机转向性能 |
China National Standards W |
English PDF |
GB/T 3871.18-2006 |
Agricultural tractors - Test procedures - Part 18: Hydraulic poWer at tractor/implement interface 农业拖拉机 试验规程 第18部分:拖拉机与机具接口处液压功率 |
China National Standards W |
English PDF |
GB/T 3871.16-2006 |
Agricultural tractors - Test procedures - Part 16: Axle poWer determination 农业拖拉机 试验规程 第16部分:轴功率测定 |
China National Standards W |
English PDF |
GB/T 3871.14-2006 |
Agricultural tractors - Test procedures - Part 14: Partial poWer PTO - Non-mechanically transmitted power 农业拖拉机 试验规程 第14部分:非机械式传输的部分功率输出动力输出轴 |
China National Standards W |
English PDF |
GB/T 3871.10-2006 |
Agricultural tractors - Test procedures - Part 10: LoW temperature starting 农业拖拉机 试验规程 第10部分:低温起动 |
China National Standards W |
English PDF |
GB/T 3810.3-2006 |
Test method of ceramic tiles Part 3: Determination of Water absorption, apparent porosity, apparent relative density and bulk density 陶瓷砖试验方法 第3部分:吸水率、显气孔率、表观相对密度和容重的测定 |
China National Standards W |
English PDF |
GB/T 8243.6-2006 |
Methods of test for full-floW lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验 |
China National Standards W |
English PDF |
GB/T 8243.5-2006 |
Methods of test for full-floW lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验 |
China National Standards W |
English PDF |
GB/T 20063.10-2006 |
Graphical symbols for diagrams -Part 10: Fluid poWer converters 简图用图形符号 第10部分:流动功率转换器 |
China National Standards W |
English PDF |
GB/T 8706-2006 |
Steel Wire ropes - Vocabulary, designation and classification 钢丝绳-术语、标记和分类 |
China National Standards W |
English PDF |
GB/T 20099-2006 |
Sample preparation - Dispersing procedures for poWders in liquids 样品制备-粉末在液体中的分散方法 |
China National Standards W |
English PDF |
GB/T 20067-2006 |
Large diameter steel Wire ropes 粗直径钢丝绳 |
China National Standards W |
English PDF |
GB/T 20065-2006 |
ScreW-thread steel bars for the prestressing of concrete 预应力混凝土用螺纹钢筋 |
China National Standards W |
English PDF |
GB/T 14291-2006 |
Welded steel tubes for mine liquid service 矿山流体输送用电焊钢管 |
China National Standards W |
English PDF |
GB/T 11182-2006 |
Steel Wire for rubber hose reinforcement 橡胶软管增强用钢丝 |
China National Standards W |
English PDF |
GB/T 10922-2006 |
Gauges for pipe threads With 55 degree thread angle where pressure-tight joints are not made on the threads 55°非密封管螺纹量规 |
China National Standards W |
English PDF |
GB/T 15629.1103-2006 |
Information technology - Telecommunications and information exchange betWeen systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Specification 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:附加管理域操作规范 |
China National Standards W |
English PDF |
GB 15629.1104-2006 |
Information technology - Telecommunications and information exchange betWeen systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Further Higher 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4GHz频段更高数据速率扩展规范 |
China National Standards W |
English PDF |
GB 15629.1101-2006 |
Information technology - Telecommunications and information exchange betWeen systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: High-Speed Phy 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:5.8GHz频段高速物理层扩展规范 |
China National Standards W |
English PDF |
GB 12514.4-2006 |
Fire coupling - Part 4: Patterns and basic parameters for fire screW-type coupling 消防接口 第4部分:螺纹式消防接口型式和基本参数 |
China National Standards W |
English PDF |
GB/T 5289.3-2006 |
Test conditions for boring and milling machines With horizontal spindle - Testing of the accuracy - Part 3: Floor type machines with detached, stationary work-holding table 卧式铣镗床检验条件 精度检验 第3部分:带分离式工件夹持固定工作台的落地式机床 |
China National Standards W |
English PDF |
GB/T 3932.2-2006 |
Test conditions for manually controlled milling machines With table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle 床身铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards W |
English PDF |
GB/T 3932.1-2006 |
Test conditions for manually controlled milling machines With table of fixed height - Testing of the accuracy - Part 1: Machines with horizontal spindle 床身铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards W |
English PDF |
GB/T 20089-2006 |
Machinery and equipment for Working the soil - Mouldboard plough working elements - Vocabulary 土壤耕作机械 铧式犁工作部件 词汇 |
China National Standards W |
English PDF |
GB/T 20088-2006 |
Machinery for agriculture - Trailed units of shalloW tillage equipment - Main dimensions and attachment points 农业机械 浅耕机具的牵引装置 主要尺寸和连接点 |
China National Standards W |
English PDF |
GB/T 20087-2006 |
Equipment for Working the soil - Rotary cultivator blades - Fixing dimensions 土壤耕作机械 旋转式中耕机刀片 安装尺寸 |
China National Standards W |
English PDF |
GB/T 20086-2006 |
Equipment for Working the soil - Roller sections - Coupling and section width 土壤耕作机械 镇压器 联接方式和工作幅宽 |
China National Standards W |
English PDF |
GB 20062-2006 |
Mobile craWler crane Limits and measurement methods for operating noise 流动式起重机作业噪声限值及测量方法 |
China National Standards W |
English PDF |
GB/T 9045-2006 |
Photography―Photographic materials―Determination of ISO resolving poWer 摄影 照相材料 ISO分辨力的测定 |
China National Standards W |
English PDF |
GB/T 7364-2006 |
Standard test method for carbonizable substances in paraffin Wax 石蜡易炭化物试验法 |
China National Standards W |
English PDF |
GB 12942-2006 |
Safety code for painting - Technical requirements of safety for Working in confined spaces 涂装作业安全规程 有限空间作业安全技术要求 |
China National Standards W |
English PDF |
GB/T 7784-2006 |
Test methods for poWer reciprocating pumps 机动往复泵试验方法 |
China National Standards W |
English PDF |
GB/T 20082-2006 |
Hydraulic fluid poWer -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope 液压传动 液体污染 采用光学显微镜测定颗粒污染度的方法 |
China National Standards W |
English PDF |
GB/T 20081.2-2006 |
Pneumatic fluid poWer -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers 气动减压阀和过滤减压阀 第2部分:评定商务文件中应包含的主要特性的测试方法 |
China National Standards W |
English PDF |
GB/T 20081.1-2006 |
Pneumatic fluid poWer -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements 气动减压阀和过滤减压阀 第1部分:商务文件中应包含的主要特性和产品标识要求 |
China National Standards W |
English PDF |
GB/T 20080-2006 |
Hydraulic fluid poWer - Filters element - General specification 液压滤芯技术条件 |
China National Standards W |
English PDF |
GB/T 20079-2006 |
Hydraulic fluid poWer - Filters - General specification 液压过滤器技术条件 |
China National Standards W |
English PDF |
GB/T 8929-2006 |
Crude petroleum - Determination of Water - Distillation method 原油水含量的测定 蒸馏法 |
China National Standards W |
English PDF |
GB/T 3450-2006 |
Noise limit and measurement inside driver’s cabs of railWay locomotive and powered car train-sets 铁道机车和动车组司机室噪声限值及测量方法 |
China National Standards W |
English PDF |
GB/T 20076-2006 |
Measurement methods of maximum torque and maximum net poWer of engines for motorcycles and mopeds 摩托车和轻便摩托车发动机 最大扭矩和最大净功率测量方法 |
China National Standards W |
English PDF |
GB 50014-2006 |
Code for design of outdoor Wastewater engineering 室外排水设计规范(2016年版) |
China National Standards W |
English PDF |
GB 50013-2006 |
Code for design of outdoor Water supply engineering 室外给水设计规范 |
China National Standards W |
English PDF |
GB/T 20098-2006 |
General technical requirements for protective boot use at loW temperature workplace 低温环境作业保护靴通用技术要求 |
China National Standards W |
English PDF |
GB/T 13641-2006 |
General technical requirements of skin-protective agent for Workers 劳动护肤剂通用技术条件 |
China National Standards W |
English PDF |
GB/T 4781-2006 |
Commercial road vehicles - 50mm draWbar eye - Interchangeability 道路车辆 50毫米牵引杆挂环的互换性 |
China National Standards W |
English PDF |
GB/T 4607-2006 |
Road vehicles - 90 semi-trailer fifth Wheel coupling pin - Basic and mounting/interchangeability dimensions 道路车辆 半挂车牵引座90号牵引销的基本尺寸和安装、互换性尺寸 |
China National Standards W |
English PDF |
Find out:15323Items | To Page of: First -Previous-Next -Last | [119] [120] [121] [122] [123] [124] [125] |