GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 33897-2017 |
Biopolyester—Polyhydroxyalkanoates(PHA) bloWing film 生物聚酯 聚羟基烷酸酯(PHA)吹塑薄膜 |
China National Standards W |
English PDF |
GB/T 33912-2017 |
Wrought aluminum and aluminum alloy ingots made of high pure materials 高纯金属为原料的变形铝及铝合金铸锭 |
China National Standards W |
English PDF |
GB/T 33863.1-2017 |
OPC unified architecture—Part 1: OvervieW and concepts OPC统一架构 第1部分:概述和概念 |
China National Standards W |
English PDF |
GB/T 17646-2017 |
Small Wind turbines 小型风力发电机组 |
China National Standards W |
English PDF |
GB/T 4459.7-2017 |
Technical draWings—The detailed simplified representation of rolling bearings 机械制图 滚动轴承表示法 |
China National Standards W |
English PDF |
GB/T 15113-2017 |
Dispatching Winch 调度绞车 |
China National Standards W |
English PDF |
GB/T 33916-2017 |
Animal and vegetable fats and oils—Determination of conventional mass per volume (liter Weight in air) 动植物油脂 常规单位体积质量(每升在空气中的重量)的测定 |
China National Standards W |
English PDF |
GB/T 33914-2017 |
Feed materials—Spray-dried porcine plasma poWder 饲料原料 喷雾干燥猪血浆蛋白粉 |
China National Standards W |
English PDF |
GB/T 15670.15-2017 |
Toxicological test methods for pesticides registration—Part 15: In vivo mammalian bone marroW polychromatic erythrocyte micronucleus test 农药登记毒理学试验方法 第15部分:体内哺乳动物骨髓嗜多染红细胞微核试验 |
China National Standards W |
English PDF |
GB/T 33928-2017 |
Reciprocating internal combustion engines—Measurement method for exhaust silencers—Sound poWer level of exhaust noise and insertion loss using sound pressure and power loss ratio 往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比 |
China National Standards W |
English PDF |
GB/T 26831.4-2017 |
Specification for reading system of energy metering in community—Part 4:Wireless meter readout 社区能源计量抄收系统规范 第4部分:仪表的无线抄读 |
China National Standards W |
English PDF |
GB/T 26831.5-2017 |
Specification for reading system of energy metering in community—Part 5:Wireless relaying 社区能源计量抄收系统规范 第5部分:无线中继 |
China National Standards W |
English PDF |
GB/T 33988-2017 |
VIS-SWIR spectral reflectivity measurement of urban surface features 城镇地物可见光-短波红外光谱反射率测量 |
China National Standards W |
English PDF |
GB/T 33933.2-2017 |
Natural stone mining equipments—Safety requirements—Part 2: Diamond Wire saws 天然石开采设备 安全要求 第2部分:金刚石串珠锯 |
China National Standards W |
English PDF |
GB/T 33933.3-2017 |
Natural stone mining equipments—Safety requirements—Part 3: Arm type saWing machine 天然石开采设备 安全要求 第3部分:臂式锯切机 |
China National Standards W |
English PDF |
GB/T 15670.24-2017 |
Toxicological test methods for pesticides registration—Part 24: TWo-generation reproduction toxicity study 农药登记毒理学试验方法 第24部分:两代繁殖毒性试验 |
China National Standards W |
English PDF |
GB/T 15670.16-2017 |
Toxicological test methods for pesticides registration—Part 16: In vivo mammalian bone marroW cell chromosome aberration test 农药登记毒理学试验方法 第16部分:体内哺乳动物骨髓细胞染色体畸变试验 |
China National Standards W |
English PDF |
GB/T 33994-2017 |
Information and documentation—WARC file format 信息和文献 WARC文件格式 |
China National Standards W |
English PDF |
GB/T 33993-2017 |
TWo dimensional code for commodity 商品二维码 |
China National Standards W |
English PDF |
GB/T 33933.1-2017 |
Natural stone mining equipments—Safety requirements—Part 1:Disk saWing machine 天然石开采设备 安全要求 第1部分:圆盘式锯切机 |
China National Standards W |
English PDF |
GB/T 15670.21-2017 |
Toxicological test methods for pesticides registration—Part 21: Unscheduled DNA synthesis (UDS) test With mammalian liver cells in vivo 农药登记毒理学试验方法 第21部分:体内哺乳动物肝细胞程序外DNA合成(UDS)试验 |
China National Standards W |
English PDF |
GB/T 15670.3-2017 |
Toxicological test methods for pesticides registration—Part 3: Acute oral toxicity test—Up-and-doWn-procedure 农药登记毒理学试验方法 第3部分:急性经口毒性试验 序贯法 |
China National Standards W |
English PDF |
GB/Z 33902-2017 |
Measurement of fluid floW by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法 |
China National Standards W |
English PDF |
GB/T 33879-2017 |
Multi-Way precision die forgings—General specification 多向精密模锻件 通用技术条件 |
China National Standards W |
English PDF |
GB/T 22381-2017 |
Cable connections betWeen gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations 额定电压72.5kV及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards W |
English PDF |
GB/T 22382-2017 |
Direct connection betWeen power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above 额定电压72.5 kV 及以上气体绝缘金属封闭开关设备与电力变压器之间的直接连接 |
China National Standards W |
English PDF |
GB/T 33977-2017 |
Methods to quantify the steady state, poWer-frequency electrimagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations 高压成套开关设备和高压/低压预装式变电站产生的稳态、工频电磁场的量化方法 |
China National Standards W |
English PDF |
GB/T 16462.3-2017 |
Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines With inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分:倒置立式机床几何精度检验 |
China National Standards W |
English PDF |
GB/T 33878-2017 |
Steel cross Wedge rollings—Technological design principle 钢质楔横轧件 工艺编制原则 |
China National Standards W |
English PDF |
GB/T 16462.2-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines With a vertical workholding spindle 数控车床和车削中心检验条件 第2部分:立式机床几何精度检验 |
China National Standards W |
English PDF |
GB/T 23751.2-2017 |
Micro fuel cell poWer systems-Part 2: Performance test methods 微型燃料电池发电系统 第2部分: 性能试验方法 |
China National Standards W |
English PDF |
GB/T 33979-2017 |
Test methods for proton exchange membrane fuel cell poWer system at subzero environment 质子交换膜燃料电池发电系统低温特性测试方法 |
China National Standards W |
English PDF |
GB/T 2674-2017 |
Hexalobular socket raised countersunk head screWs 内六角花形半沉头螺钉 |
China National Standards W |
English PDF |
GB/T 73-2017 |
Slotted set screWs with flat point 开槽平端紧定螺钉 |
China National Standards W |
English PDF |
GB/T 2672-2017 |
Hexalobular socket pan head screWs 内六角花形盘头螺钉 |
China National Standards W |
English PDF |
GB/T 847-2017 |
Cross-recessed raised countersunk (oval) head tapping screWs 十字槽半沉头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 5282-2017 |
Slotted pan head tapping screWs 开槽盘头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 2670.3-2017 |
Hexalobular socket raised countersunk (oval) head tapping screWs 内六角花形半沉头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 5283-2017 |
Slotted countersunk (flat) head tapping screWs 开槽沉头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 2670.2-2017 |
Hexalobular socket countersunk head tapping screWs 内六角花形沉头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 9074.18-2017 |
Tapping screW and washer assemblies with plain washers 自攻螺钉和平垫圈组合件 |
China National Standards W |
English PDF |
GB/T 5285-2017 |
Hexagon head tapping screWs 六角头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 845-2017 |
Cross-recessed pan head tapping screWs 十字槽盘头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 2671.2-2017 |
Hexalobular socket head cap screWs 内六角花形圆柱头螺钉 |
China National Standards W |
English PDF |
GB/T 2671.1-2017 |
Hexalobular socket cheese (short) head screWs 内六角花形低圆柱头螺钉 |
China National Standards W |
English PDF |
GB/T 5284-2017 |
Slotted raised countersunk (oval) head tapping screWs 开槽半沉头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 32076.9-2017 |
High-strength structural bolting assemblies for preloading—Part 9: Torshear type bolt With hexagon head with large width across flats,and nut assemblies 预载荷高强度栓接结构连接副 第9部分:扭剪型大六角头螺栓和螺母连接副 |
China National Standards W |
English PDF |
GB/T 846-2017 |
Cross-recessed countersunk (flat) head tapping screWs 十字槽沉头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 2670.1-2017 |
Hexalobular socket pan head tapping screWs 内六角花形盘头自攻螺钉 |
China National Standards W |
English PDF |
GB/T 15112-2017 |
Shaft sinking Winch 凿井绞车 |
China National Standards W |
English PDF |
GB/T 20319-2017 |
Wind turbine generator systems—Specification for acceptance 风力发电机组 验收规范 |
China National Standards W |
English PDF |
GB/Z 17799.6-2017 |
Electromagnetic compatibility—Generic standards—Immunity for poWer station and substation environments 电磁兼容 通用标准 发电厂和变电站环境中的抗扰度 |
China National Standards W |
English PDF |
GB/T 27748.4-2017 |
Stationary fuel cell poWer systems Part 4: Performance test methods for small fuel cell power systems 固定式燃料电池发电系统 第4部分:小型燃料电池发电系统性能试验方法 |
China National Standards W |
English PDF |
GB/T 17626.7-2017 |
Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for poWer supply systems and equipment connected thereto 电磁兼容 试验和测量技术 供电系统及所连设备谐波、间谐波的测量和测量仪器导则 |
China National Standards W |
English PDF |
GB/T 33951-2017 |
Copper alloy rod and Wire for precision telecommunications equipment and instrument 精密仪器仪表和电讯器材用铜合金棒线 |
China National Standards W |
English PDF |
GB/T 1149.15-2017 |
Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narroW width made of cast iron 内燃机 活塞环 第15部分:薄型铸铁螺旋撑簧油环 |
China National Standards W |
English PDF |
GB/T 20108-2017 |
LoW temperature unitary air conditioner 低温单元式空调机 |
China National Standards W |
English PDF |
GB/T 7932-2017 |
Pneumatic fluid poWer-General rules and safety requirements for systems and their components 气动 对系统及其元件的一般规则和安全要求 |
China National Standards W |
English PDF |
GB/T 33922-2017 |
Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances MEMS压阻式压力敏感芯片性能的圆片级试验方法 |
China National Standards W |
English PDF |
GB/T 34016-2017 |
Generality of rat and termite proof Wires and cables 防鼠和防蚁电线电缆通则 |
China National Standards W |
English PDF |
GB/T 6031-2017 |
Rubber, vulcanized or thermoplastic—Determination of hardness (hardness betWeen 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) |
China National Standards W |
English PDF |
GB/T 33986-2017 |
Information description of product for electronic commerce transaction—Plastic product in contact With foodstuff 电子商务交易产品信息描述 食品接触塑料制品 |
China National Standards W |
English PDF |
GB 24849-2017 |
Minimum alloWable values of energy efficiency and energy efficiency grades for household and similar microwave ovens 家用和类似用途微波炉能效限定值及能效等级 |
China National Standards W |
English PDF |
GB/T 15345-2017 |
Test methods of concrete pipes for Water transmission 混凝土输水管试验方法 |
China National Standards W |
English PDF |
GB/T 13477.15-2017 |
Test method for building sealants—Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to Water 建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定 |
China National Standards W |
English PDF |
GB/T 13477.11-2017 |
Test method for building sealants—Part 11:Determination of tensile properties at maintained extension after immersion in Wates 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 |
China National Standards W |
English PDF |
GB/T 13477.9-2017 |
Test method for building sealants—Part 9:Determination of adhesion/cohesion properties after immersion in Water 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定 |
China National Standards W |
English PDF |
GB/T 33829-2017 |
Test method for snoW grip performance of passenger car tyres 轿车轮胎雪地抓着性能试验方法 |
China National Standards W |
English PDF |
GB/T 33830-2017 |
Test method for snoW grip performance of truck & bus tyres 载重汽车轮胎雪地抓着性能试验方法 |
China National Standards W |
English PDF |
GB/T 33832-2017 |
Determination of Water resistance of glass fiber 玻璃纤维耐水性的测定 |
China National Standards W |
English PDF |
GB/T 33815-2017 |
Technical specification for Wastewater treatment of iron ore mining and mineral processing enterprises 铁矿石采选企业污水处理技术规范 |
China National Standards W |
English PDF |
GB/T 27691-2017 |
Wire rod for steel cord 钢帘线用盘条 |
China National Standards W |
English PDF |
GB/T 4241-2017 |
Stainless steel Wire rods for welding 焊接用不锈钢盘条 |
China National Standards W |
English PDF |
GB/T 33814-2017 |
Welded H-section steel 焊接H型钢 |
China National Standards W |
English PDF |
GB/T 33840-2017 |
General technical requirement for Water jacket furnace 水套加热炉通用技术要求 |
China National Standards W |
English PDF |
GB/T 33778-2017 |
RF technical requirements and testing methods for the Wireless transceiver of video monitoring system 视频监控系统无线传输设备射频技术指标与测试方法 |
China National Standards W |
English PDF |
GB/T 33783-2017 |
Testing guideline for programmable logic device softWare 可编程逻辑器件软件测试指南 |
China National Standards W |
English PDF |
GB/T 33784-2017 |
Specification of programmable logic device softWare documentation 可编程逻辑器件软件文档编制规范 |
China National Standards W |
English PDF |
GB/T 33781-2017 |
General requirements for programmable logic device softWare development 可编程逻辑器件软件开发通用要求 |
China National Standards W |
English PDF |
GB/T 30269.1001-2017 |
Information technology--Sensor netWork—Part 1001: Middleware: Sensor networks node interfaces 信息技术 传感器网络 第1001部分:中间件:传感器网络节点接口 |
China National Standards W |
English PDF |
GB/T 33843-2017 |
Test method for access netWork equipment—Passive optical network based on ethernet(EPON) 接入网设备测试方法 基于以太网方式的无源光网络(EPON) |
China National Standards W |
English PDF |
GB/T 33847-2017 |
Information technology—MiddleWare terminology 信息技术 中间件术语 |
China National Standards W |
English PDF |
GB/T 33849-2017 |
Test method for access netWork equipment—Gigabit-capable passive optical network(GPON) 接入网设备测试方法 吉比特的无源光网络(GPON) |
China National Standards W |
English PDF |
GB/T 33852-2017 |
QoS technical requirements for broadband customer netWork based on telecommunication network 基于公用电信网的宽带客户网络服务质量技术要求 |
China National Standards W |
English PDF |
GB/T 33853-2017 |
Chinese office document format—Requirement for Web application 中文办公软件文档格式 网络应用要求 |
China National Standards W |
English PDF |
GB/T 20686-2017 |
Glyphosate Water soluble powders(granules) 草甘膦可溶粉(粒)剂 |
China National Standards W |
English PDF |
GB/T 33857-2017 |
General principles for energy conservation assessment—Combined heat and poWer generation project 节能评估技术导则 热电联产项目 |
China National Standards W |
English PDF |
GB 21258-2017 |
The norm of energy consumption per unit product of general coal-fired poWer set 常规燃煤发电机组单位产品能源消耗限额 |
China National Standards W |
English PDF |
GB/T 33859-2017 |
Environmental management—Water footprint—Principles, requirements and guidelines 环境管理 水足迹 原则、要求与指南 |
China National Standards W |
English PDF |
GB/T 33813-2017 |
Refining slag poWder used for cement and concrete 用于水泥和混凝土中的精炼渣粉 |
China National Standards W |
English PDF |
GB/T 24238-2017 |
Hot-rolled Wire rod for prestressed steel wire and strand 预应力钢丝及钢绞线用热轧盘条 |
China National Standards W |
English PDF |
GB/T 21652-2017 |
Copper and copper alloy Wire 铜及铜合金线材 |
China National Standards W |
English PDF |
GB/T 33824-2017 |
Aluminum and Aluminum alloys plates, sheets and strips for cans and caps of neW energy power batteries 新能源动力电池壳及盖用铝及铝合金板、带材 |
China National Standards W |
English PDF |
GB/T 33825-2017 |
Steel/copper composite rod and Wire for hermetically sealed relay 密封继电器用钢包铜复合棒线材 |
China National Standards W |
English PDF |
GB/T 30269.802-2017 |
Information technology—Sensor netWork—Part 802: Testing: Media access control and physical layer of low-rate wireless sensor network 信息技术 传感器网络 第802部分:测试:低速无线传感器网络媒体访问控制和物理层 |
China National Standards W |
English PDF |
GB/T 33777-2017 |
General specification for netWork attached storage devices 附网存储设备通用规范 |
China National Standards W |
English PDF |
GB/T 15629.16-2017 |
Information technology-Telecommunications and information exchange betWeen systems-Local and metropolitan area networks—Specific requirements—Part 16: Air interface for broadband wireless multimedia systems 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第16部分:宽带无线多媒体系统的空中接口 |
China National Standards W |
English PDF |
GB/T 33780.3-2017 |
Technical specification of electronic government common platform based on cloud computing—Part 3: Interface betWeen system and data 基于云计算的电子政务公共平台技术规范 第3部分:系统和数据接口 |
China National Standards W |
English PDF |
GB/T 11297.1-2017 |
Test method for Wavefront distortion of laser rods 激光棒波前畸变的测量方法 |
China National Standards W |
English PDF |
GB/T 33767.1-2017 |
Information technology—Biometric sample quality—Part 1:FrameWork 信息技术 生物特征样本质量 第1部分:框架 |
China National Standards W |
English PDF |
Find out:15323Items | To Page of: First -Previous-Next -Last | [41] [42] [43] [44] [45] [46] [47] |