GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 12726.2-2013 |
Nuclear poWer plants―Instrumentation important to safety―Radiation monitoring for accident and post-accident conditions—Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air 核电厂安全重要仪表 事故及事故后辐射监测 第2部分:气态排出流及通风中放射性离线连续监测设备 |
China National Standards W |
English PDF |
GB/T 12726.1-2013 |
Nuclear poWer plants―Instrumentation important to safety―Radiation monitoring for accident and post-accident conditions―Part 1: General requirements 核电厂安全重要仪表 事故及事故后辐射监测 第1部分:一般要求 |
China National Standards W |
English PDF |
GB/T 30113.1-2013 |
Optical measurement methods on floW field in microgravity fluid physics―Part 1:Shadowgraph and Schlieren 空间微重力流体物理 流场光学测量技术规范 第1部分:阴影法、纹影法 |
China National Standards W |
English PDF |
GB/T 11313.24-2013 |
Radio frequency connectors―Part 24: Sectional specification-radio frequency coaxial connectors With screw coupling, typically for use in 75Ω cable networks (type F) 射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器(F型)分规范 |
China National Standards W |
English PDF |
GB/T 30123-2013 |
Busbar trunking systems (air insulation busbar) for Wind power generation 风力发电导电轨(空气型母线槽) |
China National Standards W |
English PDF |
GB/T 30118-2013 |
Single crystal Wafers for surface acoustic wave (SAW) device applications―Specifications and measuring methods 声表面波(SAW)器件用单晶晶片规范与测量方法 |
China National Standards W |
English PDF |
GB/T 30109-2013 |
AC loss measurements―Total AC loss measurement of round superconducting Wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method 交流损耗测量 液氦温度下横向交变磁场中圆形截面超导线总交流损耗的探测线圈测量法 |
China National Standards W |
English PDF |
GB/T 15872-2013 |
PoWer supply interface for semiconductor equipment 半导体设备电源接口 |
China National Standards W |
English PDF |
GB/T 30140-2013 |
Measuring method for the shielding effectiveness of magnetic material in loW frequency alternating magnetic field 磁性材料在低频磁场中屏蔽效能的测量方法 |
China National Standards W |
English PDF |
GB/T 30143-2013 |
Specification for YZR series of Wound-rotor three-phase induction motors for crane and metallurgical applications YZR系列起重及冶金用绕线转子三相异步电动机技术条件(机座号450~500) |
China National Standards W |
English PDF |
GB/T 30138-2013 |
Design code for exhaust and cooling Water heat recovery system of gas electric power plant with reciprocating internal combustion engines 往复式内燃燃气电站余热利用系统设计规范 |
China National Standards W |
English PDF |
GB/T 30137-2013 |
PoWer quality—Voltage dips and short interruptions 电能质量 电压暂降与短时中断 |
China National Standards W |
English PDF |
GB/T 21972.3-2013 |
Specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applications―Part 3:YZP series variable-frequency adjustable-speed three-phase induction motors (cooled With centrifugal fan)for crane and met 起重及冶金用变频调速三相异步电动机技术条件 第3部分:YZP系列起重及冶金用变频调速三相异步电动机(离心风机冷却) |
China National Standards W |
English PDF |
GB/T 30095-2013 |
NetWorked manufacturing environment - Business interoperability protocol and model 网络化制造环境中业务互操作协议与模型 |
China National Standards W |
English PDF |
GB/T 30094-2013 |
Technical specification for industrial Ethernet sWitchs 工业以太网交换机技术规范 |
China National Standards W |
English PDF |
GB/T 30093-2013 |
Reliability technique revieW procedure for automation control system 自动化控制系统可靠性技术评审程序 |
China National Standards W |
English PDF |
GB/T 30092-2013 |
Metal belloWs compensator used in high voltage combined electrical appliance 高压组合电器用金属波纹管补偿器 |
China National Standards W |
English PDF |
GB/T 30049-2013 |
Test method for Washability of coal core sample 煤芯煤样可选性试验方法 |
China National Standards W |
English PDF |
GB/T 29910.6-2013 |
Industrial communication netWorks—Fieldbus specifications—Type 20 HART specification―Part 6: Additional application layer service definition and protocol specification 工业通信网络 现场总线规范 类型20:HART规范 第6部分:应用层附加服务定义和协议规范 |
China National Standards W |
English PDF |
GB/T 29910.5-2013 |
Industrial communication netWorks―Fieldbus specifications―Type 20 HART specification―Part 5: Wireless HART wireless communication network and communication profile 工业通信网络 现场总线规范 类型20:HART规范 第5部分:WirelessHART 无线通信网络及通信行规 |
China National Standards W |
English PDF |
GB/T 29910.4-2013 |
Industrial communication netWorks―Fieldbus specifications―Type 20 HART specification―Part 4: Application layer protocol specification 工业通信网络 现场总线规范 类型20:HART规范 第4部分:应用层协议规范 |
China National Standards W |
English PDF |
GB/T 29910.3-2013 |
Industrial communication netWorks―Fieldbus specifications―Type 20 HART specification―Part 3: Application layer service definition 工业通信网络 现场总线规范 类型20:HART规范 第3部分:应用层服务定义 |
China National Standards W |
English PDF |
GB/T 29910.2-2013 |
Industrial communication netWorks―Fieldbus specifications―Type 20 HART specification―Part 2: HART wired network data link layer service definition and protocol specification 工业通信网络 现场总线规范 类型20:HART规范 第2部分:HART有线网络数据链路层服务定义和协议规范 |
China National Standards W |
English PDF |
GB/T 29910.1-2013 |
Industrial communication netWorks―Fieldbus specifications―Type 20 HART specification―Part 1: HART wired network physical layer service definition and protocol specification 工业通信网络 现场总线规范 类型20:HART规范 第1部分:HART有线网络物理层服务定义和协议规范 |
China National Standards W |
English PDF |
GB/T 30169-2013 |
Geographic information―Web feature service 地理信息 基于网络的要素服务 |
China National Standards W |
English PDF |
GB/Z 17624.2-2013 |
Electromagnetic compatibility - General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment With regard to electromagnetic phenomena 电磁兼容 综述 与电磁现象相关设备的电气和电子系统实现功能安全的方法 |
China National Standards W |
English PDF |
GB/Z 16935.2-2013 |
Insulation coordination for equipment Within low-voltage systems―Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning example and dielectric testing 低压系统内设备的绝缘配合 第2-1部分:应用指南 GB/T 16935系列应用解释,定尺寸示例及介电试验 |
China National Standards W |
English PDF |
GB/T 5169.13-2013 |
Fire hazard testing for electric and electronic product―Part 13:GloWing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials 电工电子产品着火危险试验 第13部分:灼热丝/热丝基本试验方法 材料的灼热丝起燃温度(GWIT)试验方法 |
China National Standards W |
English PDF |
GB/T 5169.12-2013 |
Fire hazard testing for electric and electronic products―Part 12: GloWing/hot-wire based test methods―Glow-wire flammability index (GWFI) test method for materials 电工电子产品着火危险试验 第12部分:灼热丝/热丝基本试验方法 材料的灼热丝可燃性指数(GWFI)试验方法 |
China National Standards W |
English PDF |
GB/T 30084-2013 |
Portable fuel cell poWer system-safety 便携式燃料电池发电系统-安全 |
China National Standards W |
English PDF |
GB/T 17626.12-2013 |
Electromagnetic compatibility - Testing and measurement techniques - Ring Wave immunity test 电磁兼容 试验和测量技术 振铃波抗扰度试验 |
China National Standards W |
English PDF |
GB/T 17564.2-2013 |
Standard data element types With associated classification scheme for electric components - Part 2: EXPRESS dictionary schema 电气元器件的标准数据元素类型和相关分类模式 第2部分: EXPRESS字典模式 |
China National Standards W |
English PDF |
GB/T 14048.21-2013 |
LoW-voltage switchgear and controlgear―Part 5-9: Control circuit devices and switching elements―Flow rate switches 低压开关设备和控制设备 第5-9部分:控制电路电器和开关元件 流量开关 |
China National Standards W |
English PDF |
GB/T 14048.20-2013 |
LoW-voltage switchgear and controlgear―Part 5-8: Control circuit devices and switching elements―Three-position enabling switches 低压开关设备和控制设备 第5-8部分:控制电路电器和开关元件 三位使能开关 |
China National Standards W |
English PDF |
GB/T 14048.19-2013 |
LoW-voltage switchgear and controlgear―Part 5-7: Control circuit devices and switching elements―Requirements for proximity devices with analogue output 低压开关设备和控制设备 第5-7部分:控制电路电器和开关元件 用于带模拟输出的接近设备的要求 |
China National Standards W |
English PDF |
GB/T 1094.12-2013 |
PoWer transformers―Part 12: Loading guide for dry-type power transformers 电力变压器 第12部分:干式电力变压器负载导则 |
China National Standards W |
English PDF |
GB/T 30057-2013 |
Code of contracts for international freight forWarders 国际货运代理合同规范 |
China National Standards W |
English PDF |
GB/T 30056-2013 |
Requirement on container consolidation services of international freight forWarders 国际货运代理拼箱服务质量要求 |
China National Standards W |
English PDF |
GB/T 30055-2013 |
Requirement on customs clearance services of international freight forWarders 国际货运代理报关服务质量要求 |
China National Standards W |
English PDF |
GB/T 30086-2013 |
Determination of axial coefficient of linear expansion of plastics pipes for Water supply 给水塑料管道轴向线膨胀系数试验方法 |
China National Standards W |
English PDF |
GB/T 18043-2013 |
JeWellery - Determination of precious metal content - Method using X-ray fluorescence spectrometri 首饰 贵金属含量的测定 X射线荧光光谱法 |
China National Standards W |
English PDF |
GB 29996-2013 |
The norm of the energy consumption per unit product of coal Water mixture 水煤浆单位产品能源消耗限额 |
China National Standards W |
English PDF |
GB/T 7690.2-2013 |
Reinforcements - Test method for yarns - Part 2: Determination of tWist 增强材料 纱线试验方法 第2部分:捻度的测定 |
China National Standards W |
English PDF |
GB/T 7689.5-2013 |
Reinforcements - Test method for Woven fabrics - Part 5: Determination of glass fibre tensile breaking force and elongation at break 增强材料 机织物试验方法 第5部分:玻璃纤维拉伸断裂强力和断裂伸长的测定 |
China National Standards W |
English PDF |
GB/T 7689.4-2013 |
Reinforcements - Test method for Woven fabrics - Part 4: Determination of flexural stiffness 增强材料 机织物试验方法 第4部分:弯曲硬挺度的测定 |
China National Standards W |
English PDF |
GB/T 7689.3-2013 |
Reinforcements - Test method for Woven fabrics - Part 3: Determination of width and length 增强材料 机织物试验方法 第3部分:宽度和长度的测定 |
China National Standards W |
English PDF |
GB/T 7689.1-2013 |
Reinforcements - Test method for Woven fabrics - Part 1:Determination of thickness 增强材料 机织物试验方法 第1部分:厚度的测定 |
China National Standards W |
English PDF |
GB/T 6519-2013 |
Ultrasonic inspection of Wrought aluminium and magnesium alloy products 变形铝、镁合金产品超声波检验方法 |
China National Standards W |
English PDF |
GB/T 30021-2013 |
Warp knitting carbon fiber reinforcements 经编碳纤维增强材料 |
China National Standards W |
English PDF |
GB/T 30017-2013 |
Compositive emergency response plan for safety of copper Work 铜加工企业安全生产综合应急预案 |
China National Standards W |
English PDF |
GB/T 29999-2013 |
The norms for the integrated treatment of copper mine acidic Waste water 铜矿山酸性废水综合处理规范 |
China National Standards W |
English PDF |
GB/T 29998-2013 |
Benefit calculation to determine the mining and processing of loW-grade ore of copper mine 铜矿山低品位矿石可采选效益计算方法 |
China National Standards W |
English PDF |
GB/T 29997-2013 |
Eddy current testing method of copper and copper-alloys rods, bars and Wires 铜及铜合金棒线材涡流探伤方法 |
China National Standards W |
English PDF |
GB/T 29920-2013 |
Aluminum alloy rods With RE&high-Iron for electrical purpose 电工用稀土高铁铝合金杆 |
China National Standards W |
English PDF |
GB/T 29913.1-2013 |
Bearing steel for Wind power equipment - Part 1: Yawing and variable pitch bearing steel 风力发电设备用轴承钢 第1部分:偏航、变桨轴承用钢 |
China National Standards W |
English PDF |
GB/T 29908-2013 |
Classification and test method of air-blast resistance performance for curtain Walls,windows and doors 玻璃幕墙和门窗抗爆炸冲击波性能分级及检测方法 |
China National Standards W |
English PDF |
GB/T 29907-2013 |
Test method for Watertightness of curtain walls under dynamic wind pressure 建筑幕墙动态风压作用下水密性能检测方法 |
China National Standards W |
English PDF |
GB/T 29773-2013 |
The technical specification of Waste water recycle for copper mineral processing plant 铜选矿厂废水回收利用规范 |
China National Standards W |
English PDF |
GB/T 29734.2-2013 |
Energy-saving Windows and doors for buildings - Part 2: Aluminum-plastic complex windows and doors 建筑用节能门窗 第2部分:铝塑复合门窗 |
China National Standards W |
English PDF |
GB/T 19447-2013 |
Copper and copper-alloys seamless tubes With integral fins for heat exchanger 热交换器用铜及铜合金无缝翅片管 |
China National Standards W |
English PDF |
GB/T 19250-2013 |
Polyurethane Waterproofing coating 聚氨酯防水涂料 |
China National Standards W |
English PDF |
GB/T 18373-2013 |
E-glass fabric Woven for printed boards 印制板用E玻璃纤维布 |
China National Standards W |
English PDF |
GB/T 30038-2013 |
Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, Water and access 道路车辆 电气电子设备防护等级(IP代码) |
China National Standards W |
English PDF |
GB 10395.5-2013 |
Agricultural and forestry machinery - Safety - Part 5: PoWer-driven soil-working machines 农林机械 安全 第5部分:驱动式耕作机械 |
China National Standards W |
English PDF |
GB/T 30033-2013 |
Ship recycling management systems - Diagrams to shoW the location of hazardous materials onboard ships 拆船管理系统 船上有害物质位置示意图 |
China National Standards W |
English PDF |
GB/T 29991-2013 |
Loose poWer 香粉(蜜粉) |
China National Standards W |
English PDF |
GB/T 20847.2-2013 |
Small craft - Fire protection - Part 2: Craft With a hull length of over 15m 小艇 防火 第2部分:艇体长度大于15m 的艇 |
China National Standards W |
English PDF |
GB/T 16166-2013 |
Sacrificial anode cathodic protection for seaWater cooling system in coastal power station 滨海电厂海水冷却水系统牺牲阳极阴极保护 |
China National Standards W |
English PDF |
GB/T 30032.2-2013 |
Mobile elevating Work platforms - Design, calculations,safety requirements and test methods relative to special features - Part 2: MEWPs with non-conductive (insulating)components 移动式升降工作平台 带有特殊部件的设计、计算、安全要求和试验方法 第2部分:装有非导电(绝缘)部件的移动式升降工作平台 |
China National Standards W |
English PDF |
GB/T 26949.2-2013 |
Industrial trucks - Verification of stability - Part 2: Counterbalanced trucks With mast 工业车辆 稳定性验证 第2部分:平衡重式叉车 |
China National Standards W |
English PDF |
GB 4820-2013 |
SaWn timber for shaft lifting guide 罐道木 |
China National Standards W |
English PDF |
GB/T 12668.502-2013 |
Adjustable speed electrical poWer drive systems - Part 5-2: Safety requirements - Functional 调速电气传动系统 第5-2部分:安全要求 功能 |
China National Standards W |
English PDF |
GB 15579.7-2013 |
Arc Welding equipment - Part 7: Torches 弧焊设备 第7部分:焊炬(枪) |
China National Standards W |
English PDF |
GB 15579.5-2013 |
Arc Welding equipment - Part 5: Wire feeders 弧焊设备 第5部分:送丝装置 |
China National Standards W |
English PDF |
GB 15579.1-2013 |
Arc Welding equipment - Part 1: Welding power sources 弧焊设备 第1部分:焊接电源 |
China National Standards W |
English PDF |
GB 12668.501-2013 |
Adjustable speed electrical poWer drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy 调速电气传动系统 第5-1部分:安全要求 电气、热和能量 |
China National Standards W |
English PDF |
GB/T 5717-2013 |
Textiles - Tests for colour fastness - Colour fastness to spotting: Water 纺织品 色牢度试验 耐水斑色牢度 |
China National Standards W |
English PDF |
GB/T 4389-2013 |
Double-headed open-ended Wrenches,double-headed box wrenches and combination wrenches - Maximum widths of heads 双头呆扳手、双头梅花扳手、两用扳手 头部外形的最大尺寸 |
China National Standards W |
English PDF |
GB/T 3403.3-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde poWder moulding compounds(UF-and UF/MF-PMCs)- Part 3: Requirements for selected moulding compounds 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料(UF-和UF/MF-PMCs) 第3部分: 选定模塑料的要求 |
China National Standards W |
English PDF |
GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde poWder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料(UF-和UF/MF-PMCs) 第2部分:试样制备和性能测定 |
China National Standards W |
English PDF |
GB/T 3390.5-2013 |
Hand operated socket Wrenches - Inspection,packaging and marking 手动套筒扳手 检验规则、包装与标志 |
China National Standards W |
English PDF |
GB/T 3390.4-2013 |
Hand operated socket Wrenches - Attachments 手动套筒扳手 连接附件 |
China National Standards W |
English PDF |
GB/T 3390.3-2013 |
Hand operated socket Wrenches - Driving parts 手动套筒扳手 传动附件 |
China National Standards W |
English PDF |
GB/T 3390.2-2013 |
Hand operated socket Wrenches - Driving squares 手动套筒扳手 传动方榫和方孔 |
China National Standards W |
English PDF |
GB/T 3390.1-2013 |
Hand operated socket Wrenches - Socket 手动套筒扳手 套筒 |
China National Standards W |
English PDF |
GB/T 6839-2013 |
Testing method for lubrication of seWing threads 缝纫线润滑性试验方法 |
China National Standards W |
English PDF |
GB/T 29882-2013 |
Testing method for classification of hazardous materials - Partition coefficient of 1-octanol/Water 杂项危险物质和物品分类试验方法 正辛醇/水分配系数 |
China National Standards W |
English PDF |
GB/T 29874-2013 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry poWder 塑料 氯乙烯均聚和共聚树脂 气相色谱法对干粉中残留氯乙烯单体的测定 |
China National Standards W |
English PDF |
GB/T 29869-2013 |
General technical requirements for professional knitted sportsWear 针织专业运动服装通用技术要求 |
China National Standards W |
English PDF |
GB/T 29811.1-2013 |
Information technology - Learning,education and training - Learning system architecture and service interface - Part 1: Abstract frameWork and core interface 信息技术 学习、教育和培训 学习系统体系结构与服务接口 第1部分:抽象框架与核心接口 |
China National Standards W |
English PDF |
GB/T 29799-2013 |
Guidelines for Web content accessibility 网页内容可访问性指南 |
China National Standards W |
English PDF |
GB/T 29798-2013 |
Information technology - IT resource management specification based on Web services 信息技术 基于Web服务的IT资源管理规范 |
China National Standards W |
English PDF |
GB/T 29797-2013 |
Specification of the 13.56MHz radio frequency identification reader/Writer equipment 13.56MHz射频识别读/写设备规范 |
China National Standards W |
English PDF |
GB/T 20093-2013 |
Classification and code of neWs in Chinese 中文新闻信息分类与代码 |
China National Standards W |
English PDF |
GB/T 13454.3-2013 |
Plastics - Melamine-formaldehyde poWder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第3部分:选定模塑料的要求 |
China National Standards W |
English PDF |
GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde poWder moulding compounds(MF-PMCs)-Part 2: Preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分:试样制备和性能测定 |
China National Standards W |
English PDF |
GB/T 13454.1-2013 |
Plastics - Melamine-formaldehyde poWder moulding compounds(MF-PMCs) - Part 1: Designation system and basis for specifications 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第1部分:命名系统和分类基础 |
China National Standards W |
English PDF |
GB/T 29856-2013 |
Characterization of semiconducting single-Walled carbon nanotubes using near infrared photoluminescence spectroscopy 半导体性单壁碳纳米管的近红外光致发光光谱表征方法 |
China National Standards W |
English PDF |
GB/T 29853.2-2013 |
Information technology - Business operational vieW - Part 2: Registration of scenarios and their components as business objects 信息技术 业务操作视图 第2部分:作为业务对象的剧本及其构件的注册 |
China National Standards W |
English PDF |
GB/T 5498-2013 |
Inspection of grain and oils - Determination of test Weight 粮油检验 容重测定 |
China National Standards W |
English PDF |
Find out:15323Items | To Page of: First -Previous-Next -Last | [65] [66] [67] [68] [69] [70] [71] |