GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 50522-2009 |
Code of construction project management for unclear poWer plants 核电厂建设工程监理规范 |
China National Standards W |
English PDF |
GB/T 5263-2009 |
Agricultural tractors and machinery - Guards for poWer take-off drive shafts - Strength and wear tests and acceptance criteria 农林拖拉机和机械 动力输出万向节传动轴防护罩 强度和磨损试验及验收规范 |
China National Standards W |
English PDF |
GB/T 24723-2009 |
Receipt printer for toll collection of highWay 公路收费用票据打印机 |
China National Standards W |
English PDF |
GB/T 24721.5-2009 |
Glass fiber reinforced plastic product for highWay - Part 5: Sign base panel 公路用玻璃纤维增强塑料产品 第5部分:标志底板 |
China National Standards W |
English PDF |
GB/T 24721.4-2009 |
Glass fiber reinforced plastic product for highWay - Part 4: Non-pressure communications well lid 公路用玻璃纤维增强塑料产品 第4部分:非承压通信井盖 |
China National Standards W |
English PDF |
GB/T 24721.3-2009 |
Glass fiber reinforced plastic product for highWay - Part 3: Duct 公路用玻璃纤维增强塑料产品 第3部分:管道 |
China National Standards W |
English PDF |
GB/T 24721.2-2009 |
Glass fiber reinforced plastic product for highWay - Part 2: Trunk 公路用玻璃纤维增强塑料产品 第2部分:管箱 |
China National Standards W |
English PDF |
GB/T 24721.1-2009 |
Glass fiber reinforced plastic product for highWay - Part 1: General rule 公路用玻璃纤维增强塑料产品 第1部分:通则 |
China National Standards W |
English PDF |
GB/T 24719-2009 |
Toll booth of highWay 公路收费亭 |
China National Standards W |
English PDF |
GB/T 24716-2009 |
General specifications of solar energy poWer system for highway facilities 公路沿线设施太阳能供电系统通用技术规范 |
China National Standards W |
English PDF |
GB/T 24687-2009 |
Minitype grains Winnower 微型谷物风选机 |
China National Standards W |
English PDF |
GB/T 24678.2-2009 |
Equipment for crop protection - The stretcher-mounted poWer sprayer with wide-swath and long-range 植物保护机械 担架式宽幅远射程喷雾机 |
China National Standards W |
English PDF |
GB/T 24678.1-2009 |
Equipment for crop protection - The portable poWer sprayer with wide-swath and long-range 植物保护机械 便携式宽幅远射程喷雾机 |
China National Standards W |
English PDF |
GB/T 24675.6-2009 |
Conservation tillage equipment - Smashed straW machine 保护性耕作机械 秸秆粉碎还田机 |
China National Standards W |
English PDF |
GB/T 24675.4-2009 |
Conservation tillage equipment - Disc harroW 保护性耕作机械 圆盘耙 |
China National Standards W |
English PDF |
GB/T 24675.3-2009 |
Conservation tillage equipment - Spring tooth harroW 保护性耕作机械 弹齿耙 |
China National Standards W |
English PDF |
GB/T 24675.1-2009 |
Conservation tillage equipment - ShalloW cultivator 保护性耕作机械 浅松机 |
China National Standards W |
English PDF |
GB/T 24674-2009 |
Waste submersible motor-pumps 污水污物潜水电泵 |
China National Standards W |
English PDF |
GB/T 24672-2009 |
The metal thin-Wall tube and its accessories for sprinkling irrigation 喷灌用金属薄壁管及管件 |
China National Standards W |
English PDF |
GB/T 24670-2009 |
Water -saving irrigation equipment - Vocabulary 节水灌溉设备 词汇 |
China National Standards W |
English PDF |
GB/T 24669-2009 |
Tractors and machinery for agricultural and forestry - Auxiliary- poWer transmission connector for the operator station 农林拖拉机和机械 驾驶员操作位置用附属电力传输联接器 |
China National Standards W |
English PDF |
GB/T 24668-2009 |
Agricultural and forestry tractors and Implements - Hydraulic poWer beyond 农林拖拉机和机具 副液压系统 |
China National Standards W |
English PDF |
GB/T 24667.2-2009 |
Agricultural machinery - Guards for moving parts of poWer transmission - Guard opening with tool 农业机械 使用工具打开的动力传动运动件防护装置 |
China National Standards W |
English PDF |
GB/T 24667.1-2009 |
Agricultural machinery - Guards for moving parts of poWer transmission - Guard opening without tool 农业机械 不使用工具打开的动力传动运动件防护装置 |
China National Standards W |
English PDF |
GB/T 17126.2-2009 |
Agricultural tractors and machinery - PoWer take-off drive shafts and power-input connection - Part 2:Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments 农业拖拉机和机械 动力输出万向节传动轴和动力输入连接装置 第2部分:动力输出万向节传动轴使用规范、各类联接装置用动力输出传动系和动力输入连接装置位置及间隙范围 |
China National Standards W |
English PDF |
GB/T 17126.1-2009 |
Agricultural tractors and machinery - PoWer take-off drive shafts and power input connection - Part 1:General manufacturing and safety requirements 农业拖拉机和机械 动力输出万向节传动轴和动力输入连接装置 第1部分:通用制造和安全要求 |
China National Standards W |
English PDF |
GB/T 1209.5-2009 |
Agricultural machinery - Cutter bars - Part 5: Wearing plates 农业机械 切割器 第5部分:摩擦片 |
China National Standards W |
English PDF |
GB/T 22766.8-2009 |
After-sales service for household and similar electrical appliances - Part8:Particular requirements for Water dispenser 家用和类似用途电器售后服务 第8部分:饮水机的特殊要求 |
China National Standards W |
English PDF |
GB/T 22766.5-2009 |
After-sales service for household and similar electrical appliances - Part5:Particular requirements for Water heater 家用和类似用途电器售后服务 第5部分:电热水器的特殊要求 |
China National Standards W |
English PDF |
GB/T 22766.4-2009 |
After-sales service for household and similar electrical appliances - Part4:Particular requirements for Washing machines 家用和类似用途电器售后服务 第4部分:洗衣机的特殊要求 |
China National Standards W |
English PDF |
GB/T 24708-2009 |
Wetland classification 湿地分类 |
China National Standards W |
English PDF |
GB/T 24706-2009 |
Liancheng White duck 连城白鸭 |
China National Standards W |
English PDF |
GB/T 24699-2009 |
Sichuan White goose 四川白鹅 |
China National Standards W |
English PDF |
GB 24627-2009 |
Standard specification for Wrought nickel-titanium shape memory alloys for medical devices and surgical implants 医疗器械和外科植入物用镍-钛形状记忆合金加工材 |
China National Standards W |
English PDF |
GB 18282.4-2009 |
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the BoWie and Dick-type test for detection of steam penetration 医疗保健产品灭菌 化学指示物 第4部分:用于替代性BD类蒸汽渗透测试的二类指示物 |
China National Standards W |
English PDF |
GB 18282.3-2009 |
Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the BoWie and Dick-type steam penetration test 医疗保健产品灭菌 化学指示物 第3部分:用于BD类蒸汽渗透测试的二类指示物系统 |
China National Standards W |
English PDF |
GB/Z 24636.2-2009 |
Geometrical product specifications(GPS) - Statistical tolerance - Part 2: Statistical tolerance values and their indication on draWing 产品几何技术规范(GPS) 统计公差 第2部分:统计公差值及其图样标注 |
China National Standards W |
English PDF |
GB/T 4622.1-2009 |
Classification for spiral Wound gaskets 缠绕式垫片 分类 |
China National Standards W |
English PDF |
GB/T 24635.3-2009 |
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated Workpieces or standards 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第3部分:应用已校准工件或标准件 |
China National Standards W |
English PDF |
GB 17577-2009 |
The standard form of P.R.C for navigational Warnings 中华人民共和国航行警告标准格式 |
China National Standards W |
English PDF |
GB/T 24748-2009 |
Reciprocating internal combustion engines - FlyWheels - General specifications 往复式内燃机 飞轮 技术条件 |
China National Standards W |
English PDF |
GB/T 24709-2009 |
Shrink Wrapping machine 收缩包装机 |
China National Standards W |
English PDF |
GB/T 24603-2009 |
Boosting pressure Water supply equipment for rectangular tank 箱式叠压给水设备 |
China National Standards W |
English PDF |
GB/T 24602-2009 |
Disposal of sludge from municipal Wastewater treatment plant - Quality of sludge used in separate incineration 城镇污水处理厂污泥处置 单独焚烧用泥质 |
China National Standards W |
English PDF |
GB/T 24601-2009 |
Building hardWare for windows-tilt and turn hardware system 建筑窗用内平开下悬五金系统 |
China National Standards W |
English PDF |
GB/T 24600-2009 |
Disposal of sludge from municipal Wastewater treatment plant - Quality of sludge used in land improvement 城镇污水处理厂污泥处置 土地改良用泥质 |
China National Standards W |
English PDF |
GB/T 7120-2009 |
Three-point quick-attaching coupler of implement to agricultural Wheeled tractors - Category 3N、4N 农业轮式拖拉机和机具三点悬挂挂接器 3N类、4N类 |
China National Standards W |
English PDF |
GB/T 24659.4-2009 |
Agricultural craWler tractors - Metal track - Requirement 农业履带拖拉机 金属履带板 技术条件 |
China National Standards W |
English PDF |
GB/T 24659.3-2009 |
Agricultural craWler tractors - Support roller - Requirement 农业履带拖拉机 支重轮 技术条件 |
China National Standards W |
English PDF |
GB/T 24659.2-2009 |
Agricultural craWler tractors - Track idler - Requirement 农业履带拖拉机 驱动轮 技术条件 |
China National Standards W |
English PDF |
GB/T 24659.1-2009 |
Agricultural craWler tractors - Track idler - Requirement 农业履带拖拉机 导向轮 技术条件 |
China National Standards W |
English PDF |
GB/T 24654-2009 |
Agricultural Wheeled tractors and attachment - Front loaders - Carriages for attachments 农业轮式拖拉机及附加装置 前装载装置 连接支架 |
China National Standards W |
English PDF |
GB/T 24653-2009 |
Half-axle of agricultural Wheeled tractors - Specifications 农业轮式拖拉机半轴 技术条件 |
China National Standards W |
English PDF |
GB/T 24652-2009 |
Steering rocking arm of Wheeled tractors - Specifications 轮式拖拉机转向摇臂 技术条件 |
China National Standards W |
English PDF |
GB/T 24646-2009 |
Tractor declared poWer - Test methods 拖拉机标定功率 测试方法 |
China National Standards W |
English PDF |
GB/T 24642-2009 |
Running-in procedures for belt-driven Wheeled tractors 皮带传动轮式拖拉机 磨合规程 |
China National Standards W |
English PDF |
GB/T 24641-2009 |
Tractors equipped With implements - General requirement 带作业机具的拖拉机机组 通用技术条件 |
China National Standards W |
English PDF |
GB/T 24612.2-2009 |
Requirements for electrical safety in the Workplace - Part 2: Safety measure of operation on power off 电气设备应用场所的安全要求 第2部分:在断电状态下操作的安全措施 |
China National Standards W |
English PDF |
GB/T 24612.1-2009 |
Requirements for electrical safety in the Workplace - Part 1: General rules 电气设备应用场所的安全要求 第1部分:总则 |
China National Standards W |
English PDF |
GB/T 19408.5-2009 |
Agricultural vehicles - Mechanical connections betWeen towed and towing vehicles - Part 5: Dimensions of ball-type coupling device 农业车辆 挂车和牵引车的机械连接 第5部分:球形连接 |
China National Standards W |
English PDF |
GB/T 19408.4-2009 |
Agricultural vehicles - Mechanical connections betWeen towed and towing vehicles - Part 4: Dimensions of piton-type coupling 农业车辆 挂车和牵引车的机械连接 第4部分:楔形连接装置的尺寸 |
China National Standards W |
English PDF |
GB/T 19408.3-2009 |
Agricultural vehicles - Mechanical connections betWeen towed and towing vehicles - Part 3: Tractor drawbar 农业车辆 挂车和牵引车的机械连接 第3部分:拖拉机牵引杆 |
China National Standards W |
English PDF |
GB/T 19408.2-2009 |
Agricultural vehicles - Mechanical connections betWeen towed and towing vehicles - Part 2: Specifications for clevis coupling 40 农业车辆 挂车和牵引车的机械连接 第2部分:40号U型钩的连接 |
China National Standards W |
English PDF |
GB/T 15370.2-2009 |
General requirement of agricultural tractors - Part 2: 50 kW~130 kW wheeled tractors 农业拖拉机 通用技术条件 第2部分:50kW~130kW轮式拖拉机 |
China National Standards W |
English PDF |
GB 13954-2009 |
Warning lamps for police cars,fire engines,ambulances and engineering rescue vehicles 警车、消防车、救护车、工程救险车标志灯具 |
China National Standards W |
English PDF |
GB/T 24624-2009 |
Insulated bushings - Guide for the interpretation of dissolved gas analysis(DGA)in bushings Where oil is the impregnating medium of the main insulation(generally paper) 绝缘套管 油为主绝缘(通常为纸)浸渍介质套管中溶解气体分析(DGA)的判断导则 |
China National Standards W |
English PDF |
GB/T 24622-2009 |
Guidance on the measurement of Wettability of insulator surfaces 绝缘子表面湿润性测量导则 |
China National Standards W |
English PDF |
GB/T 24621.1-2009 |
Application guide for electric safety of loW-voltage switchgear and controlgear assemblies - Part 1: Switchgear assemblies 低压成套开关设备和控制设备的电气安全应用指南 第1部分:成套开关设备 |
China National Standards W |
English PDF |
GB/T 24610.3-2009 |
Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings With cylindrical bore and outside surface 滚动轴承 振动测量方法 第3部分:具有圆柱孔和圆柱外表面的调心滚子轴承和圆锥滚子轴承 |
China National Standards W |
English PDF |
GB/T 24610.2-2009 |
Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings With cylindrical bore and outside surface 滚动轴承 振动测量方法 第2部分:具有圆柱孔和圆柱外表面的向心球轴承 |
China National Standards W |
English PDF |
GB/T 24599-2009 |
Accessories for laying interior Wooden flooring 室内木质地板安装配套材料 |
China National Standards W |
English PDF |
GB/T 16857.3-2009 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs With the axis of a rotary table as the fourth axis 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第3部分:配置转台的轴线为第四轴的坐标测量机 |
China National Standards W |
English PDF |
GB/T 13540-2009 |
Seismic qualification for high-voltage sWitchgear and controlgear 高压开关设备和控制设备的抗震要求 |
China National Standards W |
English PDF |
GB/T 12764-2009 |
Rolling bearings - Needle roller bearings,draWn cup without inner ring - Boundary dimensions and tolerances 滚动轴承 无内圈、冲压外圈滚针轴承 外形尺寸和公差 |
China National Standards W |
English PDF |
GB/T 24664-2009 |
Evaluation and measurement method for beam quality of high poWer laser system for industry manufacturing 工业用大功率激光器光束质量测试评定方法 |
China National Standards W |
English PDF |
GB/T 13323-2009 |
Optical draWings 光学制图 |
China National Standards W |
English PDF |
GB 50541-2009 |
Code for design of raW material yard of iron and steel plants 钢铁企业原料场工艺设计规范 |
China National Standards W |
English PDF |
GB 50161-2009 |
Safety code for design of engineering of fireWorks and firecracker 烟花爆竹工程设计安全规范 |
China National Standards W |
English PDF |
GB 50052-2009 |
Code for design electric poWer supply systems 供配电系统设计规范 |
China National Standards W |
English PDF |
GB 24500-2009 |
The minimum alloWable values of energy efficiency and energy efficiency grades of industrial boilers 工业锅炉能效限定值及能效等级 |
China National Standards W |
English PDF |
GB 19761-2009 |
Minimum alloWable values of energy efficiency and energy efficiency grades for fan 通风机能效限定值及能效等级 |
China National Standards W |
English PDF |
GB/T 5909-2009 |
Performance requirements and test methods of commercial vehicles Wheels 商用车辆车轮性能要求和试验方法 |
China National Standards W |
English PDF |
GB/T 2933-2009 |
Wheels and rims for pneumatic tyres - Vocabulary,designation and marking 充气轮胎用车轮和轮辋的术语、规格代号和标志 |
China National Standards W |
English PDF |
GB/T 24553-2009 |
Motorcycles and mopeds-limitative device to steering and maximum Wheel steer angle-requirements and measurement methods 摩托车和轻便摩托车转向轮限位装置及最大转向角的技术要求和测定方法 |
China National Standards W |
English PDF |
GB/T 24552-2009 |
Electric vehicles - Windshield demisters and defrosters system - Performance requirements and test methods 电动汽车风窗玻璃除霜除雾系统的性能要求及试验方法 |
China National Standards W |
English PDF |
GB/T 6620-2009 |
Test method for measuring Warp on silicon slices by noncontact scanning 硅片翘曲度非接触式测试方法 |
China National Standards W |
English PDF |
GB/T 6619-2009 |
Test methods for boW of silicon wafers 硅片弯曲度测试方法 |
China National Standards W |
English PDF |
GB/T 6617-2009 |
Test method for measuring resistivity of silicon Wafer using spreading resistance probe 硅片电阻率测定 扩展电阻探针法 |
China National Standards W |
English PDF |
GB/T 6616-2009 |
Test methods for measuring resistivity of semiconductor Wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge 半导体硅片电阻率及硅薄膜薄层电阻测试方法 非接触涡流法 |
China National Standards W |
English PDF |
GB/T 6150.3-2009 |
Methods for chemical analysis of tungsten concentrates - Determination of phosphorus content - The phosphorus molybdenum yelloW spectrophotometry 钨精矿化学分析方法 磷量的测定 磷钼黄分光光度法 |
China National Standards W |
English PDF |
GB/T 4061-2009 |
Polycrystalline silicon-examination method-assessment of sandWiches on cross-section by chemical corrosion 硅多晶断面夹层化学腐蚀检验方法 |
China National Standards W |
English PDF |
GB/T 4058-2009 |
Test method for detection of oxidation induced defects in polished silicon Wafers 硅抛光片氧化诱生缺陷的检验方法 |
China National Standards W |
English PDF |
GB/T 24578-2009 |
Test method for measuring surface metal contamination on silicon Wafers by total reflection X-ray fluorescence spectroscopy 硅片表面金属沾污的全反射X光荧光光谱测试方法 |
China National Standards W |
English PDF |
GB/T 24577-2009 |
Test methods for analyzing organic contaminants on silicon Wafer surfaces by thermal desorption gas chromatography 热解吸气相色谱法测定硅片表面的有机污染物 |
China National Standards W |
English PDF |
GB/T 24491-2009 |
Multi-Walled carbon nanotubes 多壁碳纳米管 |
China National Standards W |
English PDF |
GB/T 24490-2009 |
Test method for purity of multi-Walled carbon nanotubes 多壁碳纳米管纯度的测量方法 |
China National Standards W |
English PDF |
GB/T 24486-2009 |
Aluminium alloy Wires for cable braiding 线缆编织用铝合金线 |
China National Standards W |
English PDF |
GB/T 24485-2009 |
Niobium carbide poWder 碳化铌粉 |
China National Standards W |
English PDF |
GB/T 24581-2009 |
Test method for loW temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities 低温傅立叶变换红外光谱法测量硅单晶中III、V族杂质含量的测试方法 |
China National Standards W |
English PDF |
GB/T 14140-2009 |
Test method for measuring diameter of semiconductor Wafer 硅片直径测量方法 |
China National Standards W |
English PDF |
Find out:15323Items | To Page of: First -Previous-Next -Last | [88] [89] [90] [91] [92] [93] [94] |