Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18335-2001 |
Specification for fleX-rigid multilayer printed boards with through connections 有贯穿连接的刚挠多层印制板规范 |
China National Standards X |
 English PDF |
| GB/T 18334-2001 |
Specification for fleXible multilayer printed boards with through conections 有贯穿连接的挠性多层印制板规范 |
China National Standards X |
English PDF |
| GB/T 8745-2001 |
TeXtiles--Burning behaviour--Determination of surface burning time of fabrics 纺织品 燃烧性能 织物表面燃烧时间的测定 |
China National Standards X |
English PDF |
| GB/T 8632-2001 |
TeXtiles--Woven fabrics--Determination of dimensional change on commercial laundering near the boiling point 纺织品 机织物 近沸点 商业洗烫后尺寸变化的测定 |
China National Standards X |
English PDF |
| GB/T 8631-2001 |
TeXtiles--Determination of dimensional changes of fabrics induced by cold-water immersion 纺织品 织物因冷水浸渍而引起的尺寸变化的测定 |
China National Standards X |
English PDF |
| GB/T 8629-2001 |
TeXtiles--Domestic washing and dryingprocedures for textile testing 纺织品 试验用家庭洗涤和干燥程序 |
China National Standards X |
English PDF |
| GB/T 8424.3-2001 |
TeXtiles--Tests for colour fastness--Calculation of colour differences 纺织品 色牢度试验 色差的计算 |
China National Standards X |
English PDF |
| GB/T 8424.2-2001 |
TeXtiles--Tests for colour fastness--Instrumental assessment of relative whiteness 纺织品 色牢度试验 相对白度的仪器评定方法 |
China National Standards X |
English PDF |
| GB/T 8424.1-2001 |
TeXtiles--Tests for colour fastness--General principles for measurement of surface colour 纺织品 色牢度试验 表面颜色的测定通则 |
China National Standards X |
English PDF |
| GB/T 6075.4-2001 |
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets eXcluding aircraft derivatives 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 |
China National Standards X |
English PDF |
| GB/T 5708-2001 |
TeXtiles--Knitted fabrics--Vocabulary 纺织品 针织物 术语 |
China National Standards X |
English PDF |
| GB/T 2543.2-2001 |
TeXtiles--Determination of twist in yarn--Part 2:Untwist-retwist method 纺织品 纱线捻度的测定 第2部分:退捻加捻法 |
China National Standards X |
English PDF |
| GB/T 18319-2001 |
TeXtiles--Testing method for thermal retention with accumulated by infrared ray 纺织品 红外蓄热保暖性的试验方法 |
China National Standards X |
English PDF |
| GB/T 18311.6-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-6:EXaminations and measurements--Return loss 纤维光学互连器件和无源器件 基本试验和测量程序 第3-6部分:检查和测量 回波损耗 |
China National Standards X |
English PDF |
| GB/T 18311.3-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-3:EXaminations andmeasurements--Monitoring change in attenuation and in return loss (multiple paths) 纤维光学互连器件和无源器件 基本试验和测量程序 第3-3部分:检查和测量 监测衰减和回波损耗变化(多路) |
China National Standards X |
English PDF |
| GB/T 18311.2-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-2:EXaminations and measurements--Polarization dependence of a single-mode fibre optic device 纤维光学互连器件和无源器件 基本试验和测量程序 第3-2部分:检查和测量 单模纤维光学器件偏振依赖性 |
China National Standards X |
English PDF |
| GB/T 18310.39-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-39:Tests--Susceptibility to eXternalmagnetic fields 纤维光学互连器件和无源器件 基本试验和测量程序 第2-39部分:试验 对外界磁场敏感性 |
China National Standards X |
English PDF |
| GB/T 18286-2000 |
Information technology--Control functionsfor teXt communication 信息技术 文本通信用控制功能 |
China National Standards X |
English PDF |
| GB/T 18276-2000 |
Test-bed methods and evaluating indeX of dynamic property for motor vehicles 汽车动力性台架试验方法和评价指标 |
China National Standards X |
English PDF |
| GB 18281.2-2000 |
Sterilization of health care products--Biological indicators--Part 2:Biological indicators for ethylene oXide sterilization 医疗保健产品灭菌 生物指示物 第2部分:环氧乙烷灭菌用生物指示物 |
China National Standards X |
English PDF |
| GB 18279-2000 |
Medical devices--Validation androutine control of ethylene oXide sterilization 医疗器械 环氧乙烷灭菌 确认和常规控制 |
China National Standards X |
English PDF |
| GB/T 15238-2000 |
Terminology work--Basic leXicographical terminology 术语工作 辞书编纂基本术语 |
China National Standards X |
English PDF |
| GB/T 12162.1-2000 |
X and gamma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第1部分:辐射特性及产生方法 |
China National Standards X |
English PDF |
| GB/T 17737.2-2000 |
Radio-frequency cables--Part 2:Sectional specification for semi-rigid radio-frequency and coaXial cables with polytetrafluoroethylene(PTFE) insulation 射频电缆 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 |
China National Standards X |
English PDF |
| GB/T 18256-2000 |
Welded steel tubes(eXcept submerged arc-welded)--Ultrasonic testing for verification of hydraulic leak-tightness 焊接钢管(埋弧焊除外) 用于确认水压密实性的超声波检测方法 |
China National Standards X |
English PDF |
| GB 18245-2000 |
Safety regulation for dust eXplosion intobacco processing system 烟草加工系统 粉尘防爆安全规程 |
China National Standards X |
English PDF |
| GB/T 18249-2000 |
Ferroalloys--EXperimental methods for checking the bias of sampling and sample preparation 检查铁合金取样和制样偏差的试验方法 |
China National Standards X |
English PDF |
| GB/T 15970.4-2000 |
Corrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaXially loaded tension specimens 金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用 |
China National Standards X |
English PDF |
| GB/T 3367.3-2000 |
Glossary of terms for railway locomotive--Names of component parts for diesel locomotive auXiliary device 铁道机车名词术语 内燃机车辅助装置零部件名词 |
China National Standards X |
English PDF |
| GB/T 17975.9-2000 |
Information technology--Generic coding of moving pictures and associated audio information--Part 9:EXtension for real time interface for systems decoders 信息技术 运动图像及其伴音信息的通用编码 第9部分:系统解码器的实时接口扩展 |
China National Standards X |
English PDF |
| GB/T 18237.3-2000 |
Information technology--Open Systems Interconnection--Generic upper layers security--Part 3:Security EXchange Service Element(SESE) protocol specification 信息技术 开放系统互连 通用高层安全 第3部分:安全交换服务元素(SESE)协议规范 |
China National Standards X |
English PDF |
| GB/T 18237.2-2000 |
Information technology--Open Systems Interconnection--Generic upper layers security--Part 2:Security EXchange Service Element(SESE)service definition 信息技术 开放系统互连 通用高层安全 第2部分:安全交换服务元素(SESE)服务定义 |
China National Standards X |
English PDF |
| GB/T 18236.1-2000 |
Information technology--Telecommunications and information eXchange between systems--Local and metropolitan area networks--Common specifications--Part 1:Medium Access Control(MAC)service definition 信息技术 系统间远程通信和信息交换 局域网和城域网 公共规范 第1部分:媒体访问控制(MAC)服务定义 |
China National Standards X |
English PDF |
| GB 16915.3-2000 |
Switches for household and similar fiXed electrical installations--Part 2:Particular requirements--Section 2:Remote-control switches(RCS) 家用和类似用途固定式电气装置的开关 第2部分:特殊要求 第2节:遥控开关(RCS) |
China National Standards X |
English PDF |
| GB 3836.15-2000 |
Electrical apparatus for eXplosive gas atmospheres--Part 15:Electrical installation in hazardous areas (other than mines) 爆炸性气体环境用电气设备 第15部分:危险场所电气安装(煤矿除外) |
China National Standards X |
English PDF |
| GB/T 274-2000 |
Rolling bearings--Chamfer dimension--MaXimumvalues 滚动轴承 倒角尺寸最大值 |
China National Standards X |
English PDF |
| GB/T 18230.7-2000 |
HeXagon nuts forstructural bolting，style 2，hot-dip galvanized(oversize tapped)--Product grade A--Property class 9 栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸)A级 9级 |
China National Standards X |
English PDF |
| GB/T 18230.6-2000 |
HeXagon nuts for structural bolting，style 1，hot-dip galvanized (oversize tapped)--Product grades A and B--Property classes 5，6 and 8 栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级 |
China National Standards X |
English PDF |
| GB/T 18230.4-2000 |
HeXagon nuts for structural boltingwith large width across flats，style 1--Product grade B--Property class 10 栓接结构用1型大六角螺母 B级 10级 |
China National Standards X |
English PDF |
| GB/T 18230.3-2000 |
HeXagon nuts for high-strength structural bolting with large width across flats--Product grade B--Property classes8 and 10 栓接结构用大六角螺母 B级 8和10级 |
China National Standards X |
English PDF |
| GB/T 18230.2-2000 |
HeXagon bolts forhigh-strength structural bolting with large width across flats(short thread length)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和10.9级 |
China National Standards X |
English PDF |
| GB/T 18230.1-2000 |
HeXagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 |
China National Standards X |
English PDF |
| GB/T 11617-2000 |
LeXicographical symbols 辞书编纂符号 |
China National Standards X |
English PDF |
| GB/T 4639-2000 |
Cinematography--Monophonic 35mm negative photographic sound record on 35 mm motion-picture film--Position and maXimum width dimensions 35mm单声道电影光学声底片上声迹的位置和最大宽度尺寸 |
China National Standards X |
English PDF |
| GB/T 4636-2000 |
MaXimum projectable image area on35mm motion-picture film--Position and dimensions 35mm影片上最大可放映画面的位置和尺寸 |
China National Standards X |
English PDF |
| GB/T 18212-2000 |
Calculation of maXimum external diameter of cables for indoor installations 户内装置用电缆最大外径的计算 |
China National Standards X |
English PDF |
| GB/T 18199-2000 |
Medical management and treatment programme for personnel eXposed to accidental external irradiation 外照射事故受照人员的医学处理和治疗方案 |
China National Standards X |
English PDF |
| GB/T 18198-2000 |
Estimation standards of personal cumulative eXposure to radon decay products for miners 矿工氡子体个人累积暴露量估算规范 |
China National Standards X |
English PDF |
| GB 8281-2000 |
Diagnostic criteria and principles of management for chronic radiation sickness from eXternal exposure 外照射慢性放射病诊断标准及处理原则 |
China National Standards X |
English PDF |
| GB 8280-2000 |
Diagnostic criteria and principles of management for acute radiation sickness from eXternal exposure 外照射急性放射病诊断标准及处理原则 |
China National Standards X |
English PDF |
| GB 18196-2000 |
Specifications of the medical eXaminations for the overexposed individuals 过量受照人员的医学检查规范 |
China National Standards X |
English PDF |
| GB 16852.6-2000 |
Diagnosis of occupational acute chemicals poisoning--Part 6:Diagnostic criteria of occupational acute toXic pulmonopathy 职业性急性化学物中毒的诊断 第6部分:职业性急性化学物中毒性呼吸系统疾病的诊断 |
China National Standards X |
English PDF |
| GB/T 18204.9-2000 |
Methods of microbiological eXamination for water in swimming pool--Determination of aerobic bacterial count 游泳池水微生物检验方法 细菌总数测定 |
China National Standards X |
English PDF |
| GB/T 18204.10-2000 |
Methods of microbiological eXamination for water in swimming pool--Determination of Coliform bacteria 游泳池水微生物检验方法 大肠菌群测定 |
China National Standards X |
English PDF |
| GB/T 889.2-2000 |
Prevailing torque type heXagon nuts(with non-metallic insert)，style 1，with fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 881-2000 |
Taper pins with eXternal thread 螺尾锥销 |
China National Standards X |
English PDF |
| GB/T 6187.2-2000 |
Prevailing torque type all-metal heXagon nuts with flange with fine pitch thread 全金属六角法兰面锁紧螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 6187.1-2000 |
Prevailing torque type all-metal heXagon nuts with flange 全金属六角法兰面锁紧螺母 |
China National Standards X |
English PDF |
| GB/T 6186-2000 |
Prevailing torque type all-metal heXagon nuts，style 2--Property class 9 2型全金属六角锁紧螺母 9级 |
China National Standards X |
English PDF |
| GB/T 6185.2-2000 |
Prevailing torque type all-metal heXagon nuts，style 2，with fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 6185.1-2000 |
Prevailing torque type all-metal heXagon nuts，style 2 2型全金属六角锁紧螺母 |
China National Standards X |
English PDF |
| GB/T 6184-2000 |
Prevailing torque type all-metal heXagon nuts，style 1 1型全金属六角锁紧螺母 |
China National Standards X |
English PDF |
| GB/T 6183.2-2000 |
Prevailing torque type heXagon nutswith flange(with non-metallic insert) with fine pitch thread 非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 6183.1-2000 |
Prevailing torque type heXagon nuts with flange(with non-metallic insert) 非金属嵌件六角法兰面锁紧螺母 |
China National Standards X |
English PDF |
| GB/T 6177.2-2000 |
HeXagon nuts with flange--Fine pitch thread 六角法兰面螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 6177.1-2000 |
HeXagon nuts with flange 六角法兰面螺母 |
China National Standards X |
English PDF |
| GB/T 6176-2000 |
HeXagon nuts，style 2，with fine pitch thread 2型六角螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 6175-2000 |
HeXagon nuts，style 2 2型六角螺母 |
China National Standards X |
English PDF |
| GB/T 6174-2000 |
HeXagon thin nuts(unchamfered) 六角薄螺母 无倒角 |
China National Standards X |
English PDF |
| GB/T 6172.2-2000 |
Prevailing torque type heXagon thin nuts(withnon-metallic insert) 非金属嵌件六角锁紧薄螺母 |
China National Standards X |
English PDF |
| GB/T 6172.1-2000 |
HeXagon thin nuts(chamfered) 六角薄螺母 |
China National Standards X |
English PDF |
| GB/T 6171-2000 |
HeXagon nuts，style 1，with fine pitch thread 1型六角螺母 细牙 |
China National Standards X |
English PDF |
| GB/T 5786-2000 |
HeXagon head bolts with fine pitch thread--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards X |
English PDF |
| GB/T 5785-2000 |
HeXagon head bolts with fine pitch thread 六角头螺栓 细牙 |
China National Standards X |
English PDF |
| GB/T 5783-2000 |
HeXagon head bolts--Full thread 六角头螺栓 全螺纹 |
China National Standards X |
English PDF |
| GB/T 5782-2000 |
HeXagon head bolts 六角头螺栓 |
China National Standards X |
English PDF |
| GB/T 5781-2000 |
HeXagon head bolts--Full thread--Product gradeC 六角头螺栓 全螺纹 C级 |
China National Standards X |
English PDF |
| GB/T 5780-2000 |
HeXagon head bolts--Product grade C 六角头螺栓 C级 |
China National Standards X |
English PDF |
| GB/T 41-2000 |
HeXagon nuts--Product grade C 六角螺母 C级 |
China National Standards X |
English PDF |
| GB/T 18195-2000 |
HeXagon nuts for fine mechanics 精密机械用六角螺母 |
China National Standards X |
English PDF |
| GB/T 2305-2000 |
Chemical reagent--Phosphorus(V) oXide 化学试剂 五氧化二磷 |
China National Standards X |
English PDF |
| GB/T 7306.2-2000 |
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and eXternal threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards X |
English PDF |
| GB/T 7306.1-2000 |
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper eXternal threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards X |
English PDF |
| GB/T 18149-2000 |
Centrifugal，miXed flow and axial pumps--Code for hydraulic performance tests--Precision class 离心泵、混流泵和轴流泵 水力性能试验规范 精密级 |
China National Standards X |
English PDF |
| GB/T 18154-2000 |
Technical specification of automatic dust eXplosion suppression devices 监控式抑爆装置技术要求 |
China National Standards X |
English PDF |
| GB/T 10454-2000 |
FleXible freight container 集装袋 |
China National Standards X |
English PDF |
| GB 9706.3-2000 |
Medical electrical equipment--Part 2:Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators 医用电气设备 第2部分:诊断X射线发生装置的高压发生器安全专用要求 |
China National Standards X |
English PDF |
| GB/T 5271.23-2000 |
Information technology--Vocabulary--Part 23:TeXt processing 信息技术 词汇 第23部分:文本处理 |
China National Standards X |
English PDF |
| GB/T 2311-2000 |
Information technology--Character code structure and eXtension techniques 信息技术 字符代码结构与扩充技术 |
China National Standards X |
English PDF |
| GB/T 4437.1-2000 |
Aluminium and aluminium alloy eXtruded tubes--Part 1:Seamless tubes 铝及铝合金热挤压管 第一部分:无缝圆管 |
China National Standards X |
English PDF |
| GB/T 12690.29-2000 |
Rare earth metals and their oXide--Determination of cerium oxide content--Fluorescent spectrophoto-metric method 稀土金属及其氧化物化学分析方法 荧光光度法测定稀土氧化物中氧化铈量 |
China National Standards X |
English PDF |
| GB/T 10322.3-2000 |
Iron ores--EXperimental methods for checking the precision of sampling 铁矿石 校核取样精密度的实验方法 |
China National Standards X |
English PDF |
| GB/T 10322.2-2000 |
Iron ores--EXperimental methods for evaluation of quality variation 铁矿石 评定品质波动的实验方法 |
China National Standards X |
English PDF |
| GB 18098-2000 |
Determination of the toXic gases formed by detonation of industrial explosives 工业炸药爆炸后有毒气体含量的测定 |
China National Standards X |
English PDF |
| GB 18097-2000 |
Test method and ajudgment of safety of permissible eXplosive in inflammable gas 煤矿许用炸药可燃气安全度试验方法及判定 |
China National Standards X |
English PDF |
| GB 18095-2000 |
Emulsion eXplosive 乳化炸药 |
China National Standards X |
English PDF |
| GB 18094-2000 |
Water gel eXplosive 水胶炸药 |
China National Standards X |
English PDF |
| GB 12437-2000 |
Industrial powdery eXplosives contained ammonium nitrate and trinitrotoluene 工业粉状铵梯炸药 |
China National Standards X |
English PDF |
| GB/T 11601-2000 |
The rule for inspection and eXchange of container of port or station for in or out 集装箱进出港站检查交接要求 |
China National Standards X |
English PDF |
| GB/T 18088-2000 |
Sampling for entry and eXit animal quarantine 出入境动物检疫采样 |
China National Standards X |
English PDF |
| Find out:7853Items | To Page of: First -Previous-Next -Last | [65] [66] [67] [68] [69] [70] [71] |
+86-755-25831330
