GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 36410.1-2018 |
Energy consumption evaluation methods of port equipment—Part 1:Quayside container crane 港口设备能源消耗评价方法 第1部分:岸边集装箱起重机 |
China National Standards a |
English PDF |
GB/T 36410.5-2018 |
Energy consumption evaluation methods of port equipment—Part 5: Port tractor 港口设备能源消耗评价方法 第5部分:港口牵引车 |
China National Standards a |
English PDF |
GB/T 36409-2018 |
Method of structural design for self-elevating units—Load and resistance factor design (LRFD) method 自升式平台结构设计方法 载荷抗力系数设计法 |
China National Standards a |
English PDF |
GB/T 36483-2018 |
Main cable paralleled wire strands for suspension bridge 悬索桥用主缆平行钢丝索股 |
China National Standards a |
English PDF |
GB/T 36547-2018 |
Technical rule for electrochemical energy storage system connected to power grid 电化学储能系统接入电网技术规定 |
China National Standards a |
English PDF |
GB/T 36545-2018 |
Technical requirements for mobile electrochemical energy storage system 移动式电化学储能系统技术要求 |
China National Standards a |
English PDF |
GB/T 36548-2018 |
Test specification for electrochemical energy storage system connected to power grid 电化学储能系统接入电网测试规范 |
China National Standards a |
English PDF |
GB/T 36544-2018 |
Proton exchange membrane fuel cell power supply system for power distribution substation 变电站用质子交换膜燃料电池供电系统 |
China National Standards a |
English PDF |
GB/T 36546-2018 |
Intrusion and hold-up systems—Technical requirements for warning devices 入侵和紧急报警系统 告警装置技术要求 |
China National Standards a |
English PDF |
GB/T 2694-2018 |
Specification of manufacturing for transmission line tower 输电线路铁塔制造技术条件 |
China National Standards a |
English PDF |
GB/T 17213.14-2018 |
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 |
China National Standards a |
English PDF |
GB/T 36542-2018 |
Haze identification for meteorological observation 霾的观测识别 |
China National Standards a |
English PDF |
GB/T 7247.13-2018 |
Safety of laser products—Part 13: Measurements for classification of laser products 激光产品的安全 第13部分:激光产品的分类测量 |
China National Standards a |
English PDF |
GB/T 18658-2018 |
Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines 摆锤式冲击试验机间接检验用夏比V型缺口标准试样 |
China National Standards a |
English PDF |
GB/T 36530-2018 |
Robots and robotic devices—Safety requirements for personal care robots 机器人与机器人装备 个人助理机器人的安全要求 |
China National Standards a |
English PDF |
GB/T 26949.9-2018 |
Industrial trucks—Verification of stability—Part 9:Counterbalanced trucks with mast handling freight containers of 6 m length and longer 工业车辆 稳定性验证 第9部分:搬运6 m及其以上长度货运集装箱的平衡重式叉车 |
China National Standards a |
English PDF |
GB/T 36320-2018 |
Construction function specifications for the third-party service platform of electronic contract 第三方电子合同服务平台功能建设规范 |
China National Standards a |
English PDF |
GB/T 36317-2018 |
Information description of product for electronic commerce transaction—Home building materials 电子商务交易产品信息描述 家装建材 |
China National Standards a |
English PDF |
GB/T 36399-2018 |
Continuously hot-dip aluminium-silicon alloy coated steel sheet and strip 连续热镀铝硅合金镀层钢板及钢带 |
China National Standards a |
English PDF |
GB/T 24593-2018 |
Welded austenitic stainless steel tubes for boiler and heat exchanger 锅炉和热交换器用奥氏体不锈钢焊接钢管 |
China National Standards a |
English PDF |
GB/T 3294-2018 |
Test method of inspection for last sizes 鞋楦尺寸检测方法 |
China National Standards a |
English PDF |
GB/T 36418-2018 |
Determination of volatile organic compounds for products with filling materials 絮用纤维制品有机挥发性物质的测定 |
China National Standards a |
English PDF |
GB/T 3367.1-2018 |
Glossary of terms for diesel locomotive—Part 1:General terms 内燃机车词汇 第1部分:基本词汇 |
China National Standards a |
English PDF |
GB/T 3367.5-2018 |
Glossary of terms for diesel locomotive—Part 5: Auxiliary devices 内燃机车词汇 第5部分:辅助装置 |
China National Standards a |
English PDF |
GB 5135.7-2018 |
automatic sprinkler systems—Part 7: Water flow indicators 自动喷水灭火系统 第7部分:水流指示器 |
China National Standards a |
English PDF |
GB/T 22535-2018 |
Grade quality of lyophilized ginseng 活性参分等质量 |
China National Standards a |
English PDF |
GB/T 3367.4-2018 |
Glossary of terms for diesel locomotive—Part 4:Hydraulic transmission system 内燃机车词汇 第4部分:液力传动系统 |
China National Standards a |
English PDF |
GB/T 22539-2018 |
Grade quality of sugar ginseng 糖参分等质量 |
China National Standards a |
English PDF |
GB/T 22534-2018 |
Grade quality of fresh-keeping ginseng 保鲜人参分等质量 |
China National Standards a |
English PDF |
GB/T 6113.202-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-2: Methods of measurement of disturbances and immunity—Measurement of disturbance power 无线电骚扰和抗扰度测量设备和测量方法规范 第2-2 部分:无线电骚扰和抗扰度测量方法 骚扰功率测量 |
China National Standards a |
English PDF |
GB/T 36549-2018 |
Operation performance index and evaluation of electrochemical energy storage station 电化学储能电站运行指标及评价 |
China National Standards a |
English PDF |
GB/T 36551-2018 |
Calculation methods for properties of concentric lay overhead electrical stranded conductors 同心绞架空导线性能计算方法 |
China National Standards a |
English PDF |
GB/T 18655-2018 |
Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards a |
English PDF |
GB/T 36558-2018 |
General technical requirements for electrochemical energy storage system in power system 电力系统电化学储能系统通用技术条件 |
China National Standards a |
English PDF |
GB/T 36524-2018 |
Tools for pressing—Compression springs with rectangular section—Housing dimensions and colour coding 冲模 矩形截面压缩弹簧 安装尺寸和颜色标识 |
China National Standards a |
English PDF |
GB/T 36523-2018 |
Compound quick intake and exhaust air valve for water supply pipeline 供水管道复合式高速排气进气阀 |
China National Standards a |
English PDF |
GB/T 14896.9-2018 |
Non-traditional machines—Terminology—Part 9:Laser processing machines 特种加工机床 术语 第9部分:激光加工机床 |
China National Standards a |
English PDF |
GB/T 36522-2018 |
Electrical controlling system for separation machinery—General technology requriements 分离机械用电气控制系统 通用技术要求 |
China National Standards a |
English PDF |
GB/T 36526-2018 |
Test methods of industrial nitrocellulose 工业用硝化纤维素测试方法 |
China National Standards a |
English PDF |
GB/T 36525-2018 |
Tools for pressing—Cam driver plates 冲模 斜楔板 |
China National Standards a |
English PDF |
GB/T 8939-2018 |
Sanitary absorbent pads(panty liner) 卫生巾(护垫) |
China National Standards a |
English PDF |
GB/T 36421-2018 |
Restricted substances concerning printing inks for packaging materials 包装材料用油墨限制使用物质 |
China National Standards a |
English PDF |
GB/T 36420-2018 |
Tissue paper and products—Safety assessment management system of chemicals and materials 生活用纸和纸制品 化学品及原料安全评价管理体系 |
China National Standards a |
English PDF |
GB/T 36419-2018 |
Household and similar beauty care appliances 家用和类似用途皮肤美容器 |
China National Standards a |
English PDF |
GB/T 20810-2018 |
Toilet tissue paper (including toilet tissue base paper) 卫生纸(含卫生纸原纸) |
China National Standards a |
English PDF |
GB/T 36423-2018 |
General requirements of intelligent household appliances operating efficiency 智能家用电器操作有效性通用要求 |
China National Standards a |
English PDF |
GB/T 22540-2018 |
Grade quality of honeyed ginseng 蜜制人参分等质量 |
China National Standards a |
English PDF |
GB/T 22533-2018 |
Grade quality of cultivated ginseng 鲜园参分等质量 |
China National Standards a |
English PDF |
GB/T 22536-2018 |
Grade quality of dried ginseng 生晒参分等质量 |
China National Standards a |
English PDF |
GB/T 36397-2018 |
Grade quality of American ginseng 西洋参分等质量 |
China National Standards a |
English PDF |
GB/T 22537-2018 |
Grade quality of boiled ginseng 大力参分等质量 |
China National Standards a |
English PDF |
GB/T 22538-2018 |
Grade quality of red ginseng 红参分等质量 |
China National Standards a |
English PDF |
GB/T 6113.102-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-2:Radio disturbance and immunity measuring apparatus—Coupling devices for conducted disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-2部分:无线电骚扰和抗扰度测量设备 传导骚扰测量的耦合装置 |
China National Standards a |
English PDF |
GB/T 24841-2018 |
Technical specification for capacitor voltage transformers of 1000kV AC system 1000kV交流系统用电容式电压互感器技术规范 |
China National Standards a |
English PDF |
GB/T 36550-2018 |
Basic terminology of pumped storage power station 抽水蓄能电站基本名词术语 |
China National Standards a |
English PDF |
GB/T 17948.6-2018 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Evaluation of thermomechanical endurance of insulation systems 旋转电机 绝缘结构功能性评定 成型绕组试验规程 绝缘结构热机械耐久性评定 |
China National Standards a |
English PDF |
GB/T 24842-2018 |
Overvoltage and insulation coordination of 1000kV UHV AC transmission project 1000kV特高压交流输变电工程过电压和绝缘配合 |
China National Standards a |
English PDF |
GB/T 24843-2018 |
Technical specification of 1000 kV single phase oil-immersed auto-transformer 1000kV单相油浸式自耦电力变压器技术规范 |
China National Standards a |
English PDF |
GB/T 36501-2018 |
Soil mapping—Specifications for color and legend of soil maps of China at the scale of 1:25000 1:50000 and 1:100000 土壤制图 1:25000 1:50000 1:100000中国土壤图用色和图例规范 |
China National Standards a |
English PDF |
GB/T 36497-2018 |
Determination of polychlorinated biphenyls in coatings 涂料中多氯联苯的测定 |
China National Standards a |
English PDF |
GB/T 17659.1-2018 |
Sampling and judging methods for lot inspection of logs and sawn timbers—Part 1:Sampling and judging methods for lot inspection of logs 原木锯材批量检查抽样、判定方法 第1部分:原木批量检查抽样、判定方法 |
China National Standards a |
English PDF |
GB/T 36485.2-2018 |
Tool holders with rectangular shank for indexable inserts—Part 2: Arbor dimension 装可转位刀片的矩形柄刀杆 第2部分:刀杆尺寸 |
China National Standards a |
English PDF |
GB/T 36486-2018 |
NC hydraulic press 数控液压机 |
China National Standards a |
English PDF |
GB/T 36485.1-2018 |
Tool holders with rectangular shank for indexable inserts—Part 1:General survey, correlation and determination of dimensions 装可转位刀片的矩形柄刀杆 第1部分:概述、关联性和尺寸的确定 |
China National Standards a |
English PDF |
GB/T 36427-2018 |
Specification for conformance test of IoT household electrical appliance 物联网家电一致性测试规范 |
China National Standards a |
English PDF |
GB/T 36432-2018 |
System architecture and reference model of intelligent household appliances 智能家用电器系统架构和参考模型 |
China National Standards a |
English PDF |
GB/T 36422-2018 |
Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method 化学纤维 微观形貌及直径的测定 扫描电镜法 |
China National Standards a |
English PDF |
GB/T 36426-2018 |
General requirements of intelligent household appliances service platform 智能家用电器服务平台通用要求 |
China National Standards a |
English PDF |
GB/T 36424.1-2018 |
Interface requirements of IoT household electrical appliance—Part 1:Interface between control system and communication module 物联网家电接口规范 第1部分:控制系统与通信模块间接口 |
China National Standards a |
English PDF |
GB/T 36425-2018 |
Watch-cases and accessories—Colour range and designations of gold alloy coverings 表壳体及其附件 金合金覆盖层的颜色范围和名称 |
China National Standards a |
English PDF |
GB/T 36368-2018 |
Business requirements specification—Cross industry invoicing process 业务需求规范 跨行业发票开具过程 |
China National Standards a |
English PDF |
GB/T 36371-2018 |
Requierments specification mapping—Cross industry invocing process 需求规范映射 跨行业发票开具过程 |
China National Standards a |
English PDF |
GB/T 36370-2018 |
Cleanroom and associated controlled environments—Guidelines of application of air filters 洁净室及相关受控环境 空气过滤器应用指南 |
China National Standards a |
English PDF |
GB/T 36369-2018 |
Information and documentation—Digital object identifier system 信息与文献 数字对象唯一标识符系统 |
China National Standards a |
English PDF |
GB/T 9999.1-2018 |
China standard serial number—Part 1: China serial number 中国标准连续出版物号 第1部分:CN |
China National Standards a |
English PDF |
GB/T 36373.1-2018 |
Special equipment information resource management—Specification of data element—Part 1:Gas cylinder 特种设备信息资源管理 数据元规范 第1部分:气瓶 |
China National Standards a |
English PDF |
GB/T 24836-2018 |
1100kV gas-insulated metal-enclosed switchgear 1100kV气体绝缘金属封闭开关设备 |
China National Standards a |
English PDF |
GB/T 24844-2018 |
Technical specification for oil-immersed shunt reactor of 1000kV AC system 1000kV交流系统用油浸式并联电抗器技术规范 |
China National Standards a |
English PDF |
GB/T 24839-2018 |
Technical specification of post insulators for 1000kV a.c.system 1000kV交流系统用支柱绝缘子技术规范 |
China National Standards a |
English PDF |
GB/T 24845-2018 |
Specification of metal–oxide surge arresters without gaps for 1000kV a.c. system 1000kV交流系统用无间隙金属氧化物避雷器技术规范 |
China National Standards a |
English PDF |
GB/T 36559-2018 |
Thyristor valves for HVDC transmission 高压直流输电用晶闸管阀 |
China National Standards a |
English PDF |
GB/T 36560-2018 |
Specifications for technical documentation for the conformity demonstration of electrical and electronic products with respect to the restriction of hazardous substances 电子电气产品有害物质限制使用符合性证明技术文档规范 |
China National Standards a |
English PDF |
GB/T 36507-2018 |
Industrial trucks—Safety rules for the application, operation and maintenance 工业车辆 使用、操作与维护安全规范 |
China National Standards a |
English PDF |
GB/T 36510-2018 |
Hot-air balloon 热气球 |
China National Standards a |
English PDF |
GB/T 36511-2018 |
Underwater emergency breathing apparatus for helicopter 直升机用水下应急呼吸器 |
China National Standards a |
English PDF |
GB/T 36509-2018 |
Requirements and testing methods of structure strength for paraglider 滑翔伞结构强度要求及测试方法 |
China National Standards a |
English PDF |
GB/T 36514-2018 |
alkali recovery boilers 碱回收锅炉 |
China National Standards a |
English PDF |
GB/T 26949.16-2018 |
Industrial trucks—Verification of stability—Part 16: Pedestrian-propelled trucks 工业车辆 稳定性验证 第16部分: 步行式车辆 |
China National Standards a |
English PDF |
GB/T 36513-2018 |
Mobile road construction machinery—Safety requirements for compaction machines 移动式道路施工机械 夯实机械安全要求 |
China National Standards a |
English PDF |
GB/T 36515-2018 |
Concrete product machinery—Safety requirements for block making machines 混凝土制品机械 砌块成型机安全要求 |
China National Standards a |
English PDF |
GB/T 36434-2018 |
Complex mechanical watch movements—Terminology for parts and assemblies of perpetual calendar and repeater mechanism 复杂机械手表机心 万年历和打簧机构零部件的名称 |
China National Standards a |
English PDF |
GB/T 36429-2018 |
System architecture and application model of IoT household electrical appliance 物联网家电系统结构及应用模型 |
China National Standards a |
English PDF |
GB/T 36428-2018 |
Public instruction set of IoT household electrical appliance 物联网家电公共指令集 |
China National Standards a |
English PDF |
GB/T 5601-2018 |
Rules for inspecting and testing of railway for freight car 铁道货车检查与试验规则 |
China National Standards a |
English PDF |
GB/T 18411-2018 |
Power-driven vehicles manufacturer’s plate 机动车产品标牌 |
China National Standards a |
English PDF |
GB/T 36482-2018 |
Ships and marine technology—Ship recycling management systems—Guidelines for the implementation of GB/T 33800 船舶与海上技术 拆船管理体系 GB/T 33800实施导则 |
China National Standards a |
English PDF |
GB/T 35176.3-2018 |
Ships and marine technology—Marine NOx reduction agent AUS 40—Part 3: Handling,transportation and storage 船舶与海上技术 船舶氮氧化物还原剂AUS 40 第3部分:处理、运输和储存 |
China National Standards a |
English PDF |
GB/T 33260.5-2018 |
Capability of detection—Part 5: Methodology in the linear and nonlinear calibration cases 检出能力 第5部分:非线性校准情形检出限的确定方法 |
China National Standards a |
English PDF |
GB/T 36379-2018 |
Evaluation indicators classifications for informal finance assets 民间金融资产评价指标分类 |
China National Standards a |
English PDF |
GB/T 33260.4-2018 |
Capability of detection—Part 4: Methodology for comparing the minimum detectable value with a given value 检出能力 第4部分:最小可检出值与给定值的比较方法 |
China National Standards a |
English PDF |
Find out:54969Items | To Page of: First -Previous-Next -Last | [133] [134] [135] [136] [137] [138] [139] |