China National Standards

China degree GB Standards Search System


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "degree" GB Standards List:
  • Standard  Code GB Standard Title Standard Class Order
  • GB/T 5502-2018
  • Inspection of grain and oils—Determination of milling degree of rice degree
    China National Standards
  • GB/T 34917-2017
  • Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method degree
    China National Standards
  • GB/T 19224-2017
  • Determination of the relative degree of oxidation in bituminous coal degree
    China National Standards
  • GB/T 4208-2017
  • degrees of protection provide by enclosure (IP code) degree
    China National Standards
  • GB/T 32777-2016
  • Test method of degree of dissolution and solution stability for pesticides degree
    China National Standards
  • FZ/T 50001-2016
  • Test method for interlacing degree of synthetic filament yarns degree
    China Textile & Garment industry Standards
  • GB/T 32561.2-2016
  • Measuring method for chalcogenide infrared optical glass—Part 2: degree of striae degree
    China National Standards
  • GB/T 32369-2015
  • Determination of the degree of cure for sealant degree
    China National Standards
  • GB/T 32062-2015
  • In-situ test method for degradation ratio of vacuum degree of vacuum glazing—Photoelastic method degree
    China National Standards
  • GB/T 30789.5-2015
  • Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 5: Assessment of degree of flaking degree
    China National Standards
  • GB/T 30789.4-2015
  • Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 4: Assessment of degree of cracking degree
    China National Standards
  • GB/T 30789.6-2015
  • Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 6: Assessment of degree of chalking by tape method degree
    China National Standards
  • GB/T 30789.7-2015
  • Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 7: Assessment of degree of chalking by velvet method degree
    China National Standards
  • GB/T 30789.8-2015
  • Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial degree
    China National Standards
  • GB/T 30789.2-2014
  • Paints and varnishes―Evaluation of degradation of coatings―Designation of quantity and size of defects ,and of intensity of uniform changes in appearance―Part 2: Assessment of degree of blistering degree
    China National Standards
  • GB/T 30789.9-2014
  • Paints and varnishes―Evaluation of degradation of coatings―Designation of quantity and size of defects,and of intensity of uniform changes in appearance―Part 9: Assessment of degree of filiform corrosion degree
    China National Standards
  • GB/T 30789.3-2014
  • Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 3: Assessment of degree of rusting degree
    China National Standards
  • GB/T 2391-2014
  • Reactive dyes―Determination of degree of fixation degree
    China National Standards
  • GB/T 30556.7-2014
  • Electromagnetic compatibility―Installation and mitigation guidelines―degrees of protection provided by enclosures against electromagnetic disturbances (EM code) degree
    China National Standards
  • JJF 1456-2014
  • Calibration Specification for Optical degree of Polarization Meter for Telecommunications degree
    China Metrological Standards
  • GB/T 2396-2013
  • Disperse dyes—Determination of degree of fixation—Thermosol dyeing process degree
    China National Standards
  • GB/T 30038-2013
  • Road vehicles - degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access degree
    China National Standards
  • GB/T 29850-2013
  • Test method for measuring compensation degree of silicon materials used for photovoltaic applications degree
    China National Standards
  • GB/T 29537-2013
  • Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads degree
    China National Standards
  • QC/T 402-2013
  • 24-degree cone connectors. Male branch tee-Body degree
    China Automobile & Vehicle industry Standards
  • QC/T 399-2013
  • 24-degree cone connectors. Male-Body degree
    China Automobile & Vehicle industry Standards
  • QC/T 400-2013
  • 24-degree cone connectors. Male run tee-Body degree
    China Automobile & Vehicle industry Standards
  • QC/T 401-2013
  • 24-degree cone connectors. Male elbow-Body degree
    China Automobile & Vehicle industry Standards
  • SN/T 3513-2013
  • Determination for degree of surface finish of stainless steel plate degree
    China Import Export Inspection Standards
  • GB/T 29305-2012
  • Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials degree
    China National Standards
  • DL/T 5113.8-2012
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 8: Hydraulic roller compacted concrete engineering degree
    China Electricity & Power Standards
  • DL/T 5113.6-2012
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 6: Step-up substation electrical equipment installation engineering degree
    China Electricity & Power Standards
  • DL/T 5113.10-2012
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 10: Bituminous concrete engineering degree
    China Electricity & Power Standards
  • DL/T 5113.3-2012
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 3: Turbine and generator units installation engineering degree
    China Electricity & Power Standards
  • DL/T 5113.4-2012
  • Quality degree evalulate standard of unit engineering for hydropower and water conservancy construction engineering. Part 4: Auxiliary equipment of hydraulic machinery installation engineering degree
    China Electricity & Power Standards
  • DL/T 5113.5-2012
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 5: Electric generation equipment installation engineering degree
    China Electricity & Power Standards
  • GB/T 12716-2011
  • Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads degree
    China National Standards
  • GB/T 27944-2011
  • Dryseal pipe threads with the thread angle of 60 degrees degree
    China National Standards
  • HG/T 2383-2011
  • Technical specifications fo rubber and plastics 90-degreeflex testing machine degree
    China Chemical Industry Standards
  • GB/T 27592-2011
  • Reactive dyes - Determination of degree of fixation in pad dyeing degree
    China National Standards
  • GB/T 27508-2011
  • Method for determining the degree of jump and weave in 70mm、35mm and 16mm motion-picture projected images degree
    China National Standards
  • SN/T 3048-2011
  • Food contact materials for export. Polymers. Determination of the degree of 1,4-diphenyl-1,3-butadiene (DPBD) transfer. High performance liquid chromatography degree
    China Import Export Inspection Standards
  • GB/T 5504-2011
  • Inspection of grain and oils - Determination of processing degree of wheat flour degree
    China National Standards
  • YD/T 2191.7-2010
  • Electromagnrtic compatibility in telecommunication:Installation and mitigation guidelines. Part 7: degrees of protection provided by enclosures against electromagnetic disturbances degree
    China Telecommunication Standards
  • GB/T 9065.5-2010
  • Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with 37°degree flared ends degree
    China National Standards
  • GB/T 25257-2010
  • Optical functional films - Determination of warping degree degree
    China National Standards
  • GB/T 18443.2-2010
  • Testing method of performance for vacuum insulation cryogenic equipment - Part 2:Vacuum degree measurement degree
    China National Standards
  • GB/T 12008.6-2010
  • Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation degree
    China National Standards
  • GB/T 12010.5-2010
  • Plastic - polyvinyl alcohol (PVAL) materials - Part 5: Determination for average polymerization degree degree
    China National Standards
  • GB 5413.30-2010
  • National Food Safety Standard-Milk and dairy products - Determination of the degree of impurity degree
    China National Standards
  • FZ/T 01080-2009
  • Testing method for the degree of crosslinkage for resin-finished fabrics. Dyeing method degree
    China Textile & Garment industry Standards
  • GB/T 24236-2009
  • Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization degree
    China National Standards
  • GB/T 24235-2009
  • Iron ores for shaft direct-reduction feedstocks - Determination of the low temperature reduction-disintegration index and degree of metallization degree
    China National Standards
  • GB/T 24189-2009
  • Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index degree
    China National Standards
  • GB/T 5817-2009
  • Hazardous degree classification of workplace with dust degree
    China National Standards
  • HG/T 2135-2009
  • Glass lined 180 degree elbows degree
    China Chemical Industry Standards
  • HG/T 2134-2009
  • Glass lined 90 degree elbows degree
    China Chemical Industry Standards
  • HG/T 2133-2009
  • Glass lined 60 degree elbows degree
    China Chemical Industry Standards
  • HG/T 2132-2009
  • Glass lined 45 degree elbows degree
    China Chemical Industry Standards
  • HG/T 3193-2009
  • Graphite 45-degreebend degree
    China Chemical Industry Standards
  • HG/T 2131-2009
  • Glass lined 30 degree elbows degree
    China Chemical Industry Standards
  • GB 17465.3-2008
  • Appliance couplers for household and similar general purposes - Part 2: Appliance couplers with a degree of protection higher than IPX0 degree
    China National Standards
  • GB/T 5507-2008
  • Inspection of grain and oils - Determination for fineness degree of flours degree
    China National Standards
  • GB/T 5502-2008
  • Inspection of grain and oils - Determination of processing degree of rice and other grain kernels degree
    China National Standards
  • GB/T 13576.3-2008
  • Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions degree
    China National Standards
  • GB/T 13576.4-2008
  • Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances degree
    China National Standards
  • GB/T 13576.2-2008
  • Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan degree
    China National Standards
  • GB/T 13576.1-2008
  • Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles degree
    China National Standards
  • GB/T 12729.4-2008
  • Spices and condiments - Determination of degree of fineness of grinding - Hand sieving method degree
    China National Standards
  • GB/T 22091.1-2008
  • Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads degree
    China National Standards
  • GB/T 11047-2008
  • Textiles - Evaluation for the snagging degree of fabrics - Mace test method degree
    China National Standards
  • GB 4208-2008
  • degrees of protection provided by enclosure(IP code) degree
    China National Standards
  • GB/T 21266-2007
  • Determination of total capsaicinoid content and representation of pungency degree in capsicum and its products degree
    China National Standards
  • GB/T 21265-2007
  • Pungency degree sensory evaluation method for capsicum degree
    China National Standards
  • HG/T 2411-2006
  • Test method for 90-degreeflexing of sole material degree
    China Chemical Industry Standards
  • GB/T 4942.1-2006
  • degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification degree
    China National Standards
  • GB/T 20138-2006
  • degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) degree
    China National Standards
  • GB/T 10922-2006
  • Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads degree
    China National Standards
  • SN/T 1731.2-2006
  • Export fireworks fireworks pharmaceutical safety performance test methods - Part 2: 75 degree C thermal stability determination degree
    China Import Export Inspection Standards
  • FZ/T 50001-2005
  • Testing method for interlacing degree of synthetic filament yarns degree
    China Textile & Garment industry Standards
  • QB/T 2723-2005
  • Leather. Chemical test. Calculation of degree of tannage, leather substance and bond organic substance degree
    China Light Industry Standards
  • DL/T 5113.1-2005
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 1: Civil department degree
    China Electricity & Power Standards
  • DL/T 5113.11-2005
  • Quality degree evaluate standard of unit engineering for hydropower and water conservancy construction engineering. Part 11: Bulb turbine and generator units installation engineering degree
    China Electricity & Power Standards
  • GB/T 19896-2005
  • degrees of projected image sharpness for 70,35and 16mm motion-picture projection systems degree
    China National Standards
  • GB/T 19811-2005
  • Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test degree
    China National Standards
  • QB/T 1054-2004
  • Pulps. Tester of beating degree degree
    China Light Industry Standards
  • GB/T 3332-2004
  • Pulps--Determination of beatingdegree(Schopper-Riegler method) degree
    China National Standards
  • GB/T 6864-2003
  • Codes for degree of the People’s Republic of China degree
    China National Standards
  • GB/T 19224-2003
  • Determining the relative degree of oxidation inbituminous coal degree
    China National Standards
  • GB/T 7760-2003
  • Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method degree
    China National Standards
  • JJG 18-2002
  • The tobacco special breathable degrees flow disk test procedures degree
    China Metrological Standards
  • GB/T 18474-2001
  • Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content degree
    China National Standards
  • GB/T 7307-2001
  • Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads degree
    China National Standards
  • HG 20660-2000
  • Chemical mediator toxic hazards and explosions degree of risk categories in the pressure vessel degree
    China Chemical Industry Standards
  • DL/T 5113.8-2000
  • Quality degree evaluate standard of unit engineering for hydro power and water conservancy construction engineering (eight). Hydraulic roller compacted concrete engineering degree
    China Electricity & Power Standards
  • FZ/T 01080-2000
  • Determination of the degree of crosslinkage for resin-finished fabrics. Dyeing method degree
    China Textile & Garment industry Standards
  • GB/T 7306.2-2000
  • Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads degree
    China National Standards
  • GB/T 7306.1-2000
  • Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads degree
    China National Standards
  • GB/T 18105-2000
  • Method for determination of the processing degree of rice and other grain kernels using iso-color-phase differential staining(IDS) degree
    China National Standards
  • SN/T 0800.13-1999
  • Cereals and feedstuffs for import and export. Method for the inspection of milling degree degree
    China Import Export Inspection Standards

    Find out:169Items   |  To Page of: First -Previous-Next -Last  | 1 2

     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2018 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards