GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 7940.3-2001 |
Pneumatic fluid power--Five-port directional control valves--Part 3:Code system for communication of valve functions 气动 五气口方向控制阀 第3部分:功能识别编码体系 |
China National Standards di |
English PDF |
GB/T 6075.4-2001 |
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 |
China National Standards di |
English PDF |
GB/T 4329-2001 |
Tractor and machinery for agriculture and forestry--Linch pins and spring pins--dimensions and requirements 农林拖拉机和机具 锁销和弹性销 尺寸和要求 |
China National Standards di |
English PDF |
GB/T 18325.1-2001 |
Plainbearings--Bearing fatigue--Plain bearings in test rigs and in application underconditions of hydrodynamic lubrication 滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度 |
China National Standards di |
English PDF |
GB/T 18323-2001 |
Plain bearings--Sintered bushes--dimensions and tolerances 滑动轴承 烧结轴套的尺寸和公差 |
China National Standards di |
English PDF |
GB/T 9019-2001 |
Nominal diameter of pressure vessels 压力容器公称直径 |
China National Standards di |
English PDF |
GB 18208.2-2001 |
Post-earthquake field works--Part 2:Safety assessment of buildings 地震现场工作 第2部分:建筑物安全鉴定 |
China National Standards di |
English PDF |
GB 10080-2001 |
Safety requirements of fan for air conditioning 空调用通风机安全要求 |
China National Standards di |
English PDF |
GB/T 18290.4-2000 |
Solderless connections--Part 4:Solderless non-accessible insulation displacement connections--General requirements,test methods and practical guidance 无焊连接 第4部分:不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards di |
English PDF |
GB/T 18290.3-2000 |
Solderless connections--Part 3:Solderless accessible insulation displacement connections--General requirements,test methods and practical guidance 无焊连接 第3部分:可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards di |
English PDF |
GB/T 18273-2000 |
Petroleum and liquid petroleum products--direct static measurements--Contents ofvertical storage tanks--Mass measurement by hydrostatic tank gauging 石油和液体石油产品 立式罐内油量的直接静态测量法 (HTG质量测量法) |
China National Standards di |
English PDF |
GB 9706.20-2000 |
Medical electrical equipment--Part 2:Particular requirements for the safety of diagnostic andtherapeutic laser equipment 医用电气设备 第2部分:诊断和治疗激光设备安全专用要求 |
China National Standards di |
English PDF |
GB 18282.1-2000 |
Sterilization of health care products--Chemical indicators--Part 1:General requirements 医疗保健产品灭菌 化学指示物 第1部分:通则 |
China National Standards di |
English PDF |
GB 18281.3-2000 |
Sterilization of health care products--Biological indicators--Part 3:Biological indicators for moist heat sterilization 医疗保健产品灭菌 生物指示物 第3部分:湿热灭菌用生物指示物 |
China National Standards di |
English PDF |
GB 18281.2-2000 |
Sterilization of health care products--Biological indicators--Part 2:Biological indicators for ethylene oxide sterilization 医疗保健产品灭菌 生物指示物 第2部分:环氧乙烷灭菌用生物指示物 |
China National Standards di |
English PDF |
GB 18281.1-2000 |
Sterilization of health care products--Biological indicators--Part 1:General 医疗保健产品灭菌 生物指示物 第1部分:通则 |
China National Standards di |
English PDF |
GB 18280-2000 |
Sterilization of healthcare products--Requirement for validation and routine control--Radiation sterilization 医疗保健产品灭菌 确认和常规控制要求 辐射灭菌 |
China National Standards di |
English PDF |
GB 18279-2000 |
Medical devices--Validation androutine control of ethylene oxide sterilization 医疗器械 环氧乙烷灭菌 确认和常规控制 |
China National Standards di |
English PDF |
GB/T 16895.9-2000 |
Electrical installations of buildings--Part 7:Requirements for special installations or locations--Section 707:Earthing requirements for the electrical installation of data processing equipment 建筑物电气装置 第7部分:特殊装置或场所的要求 第707节:数据处理设备用电气装置的接地要求 |
China National Standards di |
English PDF |
GB/T 15153.2-2000 |
Telecontrol equipment and systems--Part 2:Operating conditions--Section 2:Environmental conditions (cli-matic,mechanical and other non-electrical influences) 远动设备及系统 第2部分:工作条件 第2篇:环境条件(气候、机械和其他非电影响因素) |
China National Standards di |
English PDF |
GB/T 12162.1-2000 |
X and gamma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第1部分:辐射特性及产生方法 |
China National Standards di |
English PDF |
GB/T 17737.2-2000 |
Radio-frequency cables--Part 2:Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation 射频电缆 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 |
China National Standards di |
English PDF |
GB/T 18271.2-2000 |
Process measurement and control devices--General methods and procedures for evaluating performance--Part 2:Tests under reference conditions 过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验 |
China National Standards di |
English PDF |
GB/T 17214.3-2000 |
Operating conditions for industrial-process measurement and control equipment--Part 3:Mechanical influences 工业过程测量和控制装置的工作条件 第3部分:机械影响 |
China National Standards di |
English PDF |
GB 18265-2000 |
Operation conditions and technical requirements for enterprises handling dangerous chemicals business 危险化学品经营企业开业条件和技术要求 |
China National Standards di |
English PDF |
GB/T 5051-2000 |
General technical conditions for the particle forming machine 刨花铺装机通用技术条件 |
China National Standards di |
English PDF |
GB 9985-2000 |
Detergents for hand dishwashing 手洗餐具用洗涤剂 |
China National Standards di |
English PDF |
GB/T 18251-2000 |
Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法 |
China National Standards di |
English PDF |
GB/T 18255-2000 |
Coking viscous oil products--Determination ofdistillation range 焦化粘油类产品馏程的测定 |
China National Standards di |
English PDF |
GB/T 18244-2000 |
Test methods for resistance to weathering of building waterproofing materials 建筑防水材料老化试验方法 |
China National Standards di |
English PDF |
GB/T 18241.2-2000 |
Rubber lining--Part 2:Lining for grinding mills 橡胶衬里 第2部分:磨机衬里 |
China National Standards di |
English PDF |
GB/T 3090-2000 |
Stainless steel small diameter seamless steel tubes 不锈钢小直径无缝钢管 |
China National Standards di |
English PDF |
GB/T 3367.7-2000 |
Glossary of terms for railway locomotive--Terms of diesel engine 铁道机车名词术语 柴油机术语 |
China National Standards di |
English PDF |
GB/T 3367.6-2000 |
Glossary of terms for railway locomotive--Terms of diesel locomotive 铁道机车名词术语 内燃机车术语 |
China National Standards di |
English PDF |
GB/T 3367.4-2000 |
Glossary of termsfor railway locomotive--Names of component parts for diesel locomotive body andbogie 铁道机车名词术语 内燃机车车体和转向架零部件名词 |
China National Standards di |
English PDF |
GB/T 3367.3-2000 |
Glossary of terms for railway locomotive--Names of component parts for diesel locomotive auxiliary device 铁道机车名词术语 内燃机车辅助装置零部件名词 |
China National Standards di |
English PDF |
GB/T 3367.1-2000 |
Glossary of terms for railway locomotive--Names of component parts for diesel engine 铁道机车名词术语 柴油机零部件名词 |
China National Standards di |
English PDF |
GB/T 6588-2000 |
Semiconductor devices--discrete devices--Part 3:Signal(including switching) and regulator diodes--Section One--Blank detail specification for signal diodes,switching diodes and controlled-avalanche diodes 半导体器件 分立器件 第3部分:信号(包括开关)和调整二极管 第1篇 信号二极管、开关二极管和可控雪崩二极管空白详细规范 |
China National Standards di |
English PDF |
GB/T 17975.9-2000 |
Information technology--Generic coding of moving pictures and associated audio information--Part 9:Extension for real time interface for systems decoders 信息技术 运动图像及其伴音信息的通用编码 第9部分:系统解码器的实时接口扩展 |
China National Standards di |
English PDF |
GB 13836-2000 |
Cabled distributionsystems for television and sound signals--Part 2:Electromagnetic compatibility of equipment 电视和声音信号电缆分配系统 第2部分:设备的电磁兼容 |
China National Standards di |
English PDF |
GB/T 18236.1-2000 |
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Common specifications--Part 1:Medium Access Control(MAC)service definition 信息技术 系统间远程通信和信息交换 局域网和城域网 公共规范 第1部分:媒体访问控制(MAC)服务定义 |
China National Standards di |
English PDF |
GB/T 18222-2000 |
Woodworking machines--Wide belt sanding machines--Nomenclature 木工机床 宽带磨光机 术语 |
China National Standards di |
English PDF |
GB 10408.5-2000 |
Detectors for intruder alarm systems--Part 5:Passive infrared detectors for use in buildings 入侵探测器 第5部分:室内用被动红外探测器 |
China National Standards di |
English PDF |
GB 10408.3-2000 |
Detectors for intruder alarm systems--Part 3:Microwave Doppler detectors for use in buildings 入侵探测器 第3部分:室内用微波多普勒探测器 |
China National Standards di |
English PDF |
GB 10408.2-2000 |
Detectors for intruder alarm systems--Part 2:Ultrasonic Doppler detectors for use in buildings 入侵探测器 第2部分:室内用超声波多普勒探测器 |
China National Standards di |
English PDF |
GB/T 9027-2000 |
Performance requirements and test methodsfor non-directional radio beacon 无方向信标性能要求和测试方法 |
China National Standards di |
English PDF |
GB/T 274-2000 |
Rolling bearings--Chamfer dimension--Maximumvalues 滚动轴承 倒角尺寸最大值 |
China National Standards di |
English PDF |
GB/T 18230.7-2000 |
Hexagon nuts forstructural bolting,style 2,hot-dip galvanized(oversize tapped)--Product grade A--Property class 9 栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸)A级 9级 |
China National Standards di |
English PDF |
GB/T 18230.6-2000 |
Hexagon nuts for structural bolting,style 1,hot-dip galvanized (oversize tapped)--Product grades A and B--Property classes 5,6 and 8 栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级 |
China National Standards di |
English PDF |
GB/T 18230.1-2000 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 |
China National Standards di |
English PDF |
GB/T 1242-2000 |
dimensions for panel mounted indicating and recording electrical measuring instruments 安装式指示和记录电测量仪表的尺寸 |
China National Standards di |
English PDF |
GB/T 4639-2000 |
Cinematography--Monophonic 35mm negative photographic sound record on 35 mm motion-picture film--Position and maximum width dimensions 35mm单声道电影光学声底片上声迹的位置和最大宽度尺寸 |
China National Standards di |
English PDF |
GB/T 4636-2000 |
Maximum projectable image area on35mm motion-picture film--Position and dimensions 35mm影片上最大可放映画面的位置和尺寸 |
China National Standards di |
English PDF |
GB/T 4635-2000 |
Image area produced by camera aperture on 35mm motion-picture film--Position and dimensions 35mm电影摄影机片窗在胶片上形成的画面的位置和尺寸 |
China National Standards di |
English PDF |
GB/T 18212-2000 |
Calculation of maximum external diameter of cables for indoor installations 户内装置用电缆最大外径的计算 |
China National Standards di |
English PDF |
GB/T 18201-2000 |
List for radiation induced diseases 放射性疾病名单 |
China National Standards di |
English PDF |
GB/T 18200-2000 |
Report form and contents for radiation induced occupational diseases 职业性放射性疾病报告格式与内容 |
China National Standards di |
English PDF |
GB/T 18199-2000 |
Medical management and treatment programme for personnel exposed to accidental external irradiation 外照射事故受照人员的医学处理和治疗方案 |
China National Standards di |
English PDF |
GB/T 18197-2000 |
Medical management standard for internal contamination of radionuclides 放射性核素内污染人员医学处理规范 |
China National Standards di |
English PDF |
GB 8282-2000 |
diagnostic criteria and principles ofmanagement for radiation skin diseases 放射性皮肤疾病诊断标准及处理原则 |
China National Standards di |
English PDF |
GB 8281-2000 |
diagnostic criteria and principles of management for chronic radiation sickness from external exposure 外照射慢性放射病诊断标准及处理原则 |
China National Standards di |
English PDF |
GB 8280-2000 |
diagnostic criteria and principles of management for acute radiation sickness from external exposure 外照射急性放射病诊断标准及处理原则 |
China National Standards di |
English PDF |
GB 18196-2000 |
Specifications of the medical examinations for the overexposed individuals 过量受照人员的医学检查规范 |
China National Standards di |
English PDF |
GB 16852.6-2000 |
diagnosis of occupational acute chemicals poisoning--Part 6:Diagnostic criteria of occupational acute toxic pulmonopathy 职业性急性化学物中毒的诊断 第6部分:职业性急性化学物中毒性呼吸系统疾病的诊断 |
China National Standards di |
English PDF |
GB/T 12783-2000 |
Editorial nominating method for the modeldesignation of rubber and plastics machinery 橡胶塑料机械产品型号编制方法 |
China National Standards di |
English PDF |
GB/T 5779.3-2000 |
Fasteners--Surface discontinuities--Bolts,screws and studs for special requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求 |
China National Standards di |
English PDF |
GB/T 5779.2-2000 |
Fasteners--Surface discontinuities--Nuts 紧固件表面缺陷 螺母 |
China National Standards di |
English PDF |
GB/T 5779.1-2000 |
Fasteners--Surface discontinuities--Bolts,screws and studs for general requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求 |
China National Standards di |
English PDF |
GB/T 3098.17-2000 |
Mechanical properties of fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method 紧固件机械性能 检查氢脆用预载荷试验 平行支承面法 |
China National Standards di |
English PDF |
GB/T 18194-2000 |
Rivet shank diameters 铆钉杆径 |
China National Standards di |
English PDF |
GB/T 1236-2000 |
Industrial fans--Performance testing using standardized airways 工业通风机 用标准化风道进行性能试验 |
China National Standards di |
English PDF |
GB 18188.2-2000 |
Oil spill dispersant--Application criteria 溢油分散剂 使用准则 |
China National Standards di |
English PDF |
GB 18188.1-2000 |
Oil spill dispersant--Technical regulations 溢油分散剂 技术条件 |
China National Standards di |
English PDF |
GB/T 10708.3-2000 |
Reciprocating rubber seals--Types,dimensions and tolerances--Part 3:Rubber dust seals 往复运动橡胶密封圈结构尺寸系列 第3部分:橡胶防尘密封圈 |
China National Standards di |
English PDF |
GB/T 10708.2-2000 |
Reciprocating rubber seals--Types,dimensions and tolerances--Part 2:Rubber seals on two-way 往复运动橡胶密封圈结构尺寸系列 第2部分:双向密封橡胶密封圈 |
China National Standards di |
English PDF |
GB/T 10708.1-2000 |
Reciprocating rubber seals--Types,dimensions and tolerances--Part 1:Rubber seals on one-way 往复运动橡胶密封圈结构尺寸系列 第1部分:单向密封橡胶密封圈 |
China National Standards di |
English PDF |
GB/T 3595-2000 |
Fertilizers--Determination of ammoniacal nitrogen content--Titrimetric method after distillation 肥料中氨态氮含量的测定 蒸馏后滴定法 |
China National Standards di |
English PDF |
GB/T 1232.1-2000 |
Rubber,unvulcanized--Determinations using a shearing-disc viscometer--Part 1:Determination of Mooney viscosity 未硫化橡胶 用圆盘剪切粘度计进行测定 第1部分:门尼粘度的测定 |
China National Standards di |
English PDF |
GB/T 1804-2000 |
General tolerances--Tolerances for linear and angular dimensions without individual tolerance indications 一般公差 未注公差的线性和角度尺寸的公差 |
China National Standards di |
English PDF |
GB/T 17006.5-2000 |
Evaluation and routine testing in medical imaging departments--Part 2-5:Constancytests--Image display devices 医用成像部门的评价及例行试验 第2-5部分:图像显示装置稳定性试验 |
China National Standards di |
English PDF |
GB/T 17006.4-2000 |
Evaluation and routine testing in medical imaging departments--Part 2-3:Constancy tests--Darkroom safelight conditions 医用成像部门的评价及例行试验 第2-3部分:暗室安全照明状态稳定性试验 |
China National Standards di |
English PDF |
GB/T 17006.3-2000 |
Evaluation and routine testing in medical imaging departments--Part 2-2:Constancy tests--Radio-graphic cassettes and film changers--Film-screen contact and relative sensitivity of the screen-cassette assembly 医用成像部门的评价及例行试验 第2-2部分:X射线摄影暗匣和换片器 屏-片接触和屏-匣组件相对灵敏度稳定性试验 |
China National Standards di |
English PDF |
GB/T 17006.2-2000 |
Evaluation and routine testing in medical imaging departments--Part 2-1:Constancy tests--Film processors 医用成像部门的评价及例行试验 第2-1部分:洗片机稳定性试验 |
China National Standards di |
English PDF |
GB/T 17006.1-2000 |
Evaluation and routine testing in medical imaging departments--Part 1:General aspects 医用成像部门的评价及例行试验 第1部分:总则 |
China National Standards di |
English PDF |
GB 9706.3-2000 |
Medical electrical equipment--Part 2:Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators 医用电气设备 第2部分:诊断X射线发生装置的高压发生器安全专用要求 |
China National Standards di |
English PDF |
GB 9706.19-2000 |
Medical electrical equipment--Part 2:Particular requirements for the safety of endoscopic equipment 医用电气设备 第2部分:内窥镜设备安全专用要求 |
China National Standards di |
English PDF |
GB 12257-2000 |
General specification of He-Ne laser medical equipment 氦氖激光治疗机通用技术条件 |
China National Standards di |
English PDF |
GB 10793-2000 |
Medical electrical equipment--Part 2:Particular requirements for the safety of electrocardiographs 医用电气设备 第2部分:心电图机安全专用要求 |
China National Standards di |
English PDF |
GB/T 9414.7-2000 |
Guide on maintainability of equipment--Part 4:diagnostic testing 设备维修性导则 第四部分:诊断测试 |
China National Standards di |
English PDF |
GB/T 18141-2000 |
Information technology--Information interchange on 130 mm optical disk cartridges using themagneto-optical effect,for write once,read multiple functionality 信息技术 130 mm一次写入多次读出磁光盒式光盘的信息交换 |
China National Standards di |
English PDF |
GB/T 18140-2000 |
Information technology--Data interchange on 130 mm optical disk cartridges--Capacity:1 gigabyte per cartridge 信息技术 130 mm盒式光盘上的数据交换 容量:每盒1 G字节 |
China National Standards di |
English PDF |
GB/T 18139.2-2000 |
Information technology--General structure for the interchange of code values--Part 2:Registration of coding schemes 信息技术 代码值交换的通用结构 第2部分:编码方案的登记 |
China National Standards di |
English PDF |
GB/T 18139.1-2000 |
Information technology--General structure for the interchange of code values--Part 1:Identification of coding schemes 信息技术 代码值交换的通用结构 第1部分:编码方案的标识 |
China National Standards di |
English PDF |
GB/T 18138.2-2000 |
Information technology--Open Systems Interconnection--Conformance test suite for the presentation layer--Part 2:Test suite structure and test purposes for the ASN.1 basic encodings 信息技术 开放系统互连 表示层一致性测试套 第2部分:ASN.1基本编码测试套结构和测试目的 |
China National Standards di |
English PDF |
GB/T 17975.2-2000 |
Informationtechnology--Generic coding of moving pictures and associated audio information--Part 2:Video 信息技术 运动图像及其伴音信号的通用编码 第2部分:视频 |
China National Standards di |
English PDF |
GB/T 17192.5-2000 |
Information technology--Computer graphics--Interfacing techniques for dialogues with graphical devices(CGI)--Functional specification--Part 5:Inputand echoing 信息技术 计算机图形 与图形设备会话的接口技术(CGI) 功能说明 第5部分:输入和应答 |
China National Standards di |
English PDF |
GB/T 12905-2000 |
Bar coding terminology 条码术语 |
China National Standards di |
English PDF |
GB 1905-2000 |
Food additive--Sorbic acid 食品添加剂 山梨酸 |
China National Standards di |
English PDF |
GB/T 18123-2000 |
Audio,video and audiovisual systems--Application of Y/C connector and preferred electrical matching values for video systems 音频、视频及视听系统 视频系统Y/C连接器的应用和优选电配接值 |
China National Standards di |
English PDF |
GB/T 18122-2000 |
Audio visual equipment and systems--Rating plates--Marking of electricity supply 视听设备和系统 标牌 电源标志 |
China National Standards di |
English PDF |
Find out:13477Items | To Page of: First -Previous-Next -Last | [115] [116] [117] [118] [119] [120] [121] |