GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 39926-2021 |
Hydraulic fluid power—Filter element test methods—Thermal conditioning and cold start-up simulation 液压传动 滤芯试验方法 热工况和冷启动模拟 |
China National Standards di |
English PDF |
GB/T 39902-2021 |
Technical specification for the levitation control system of medium-low speed maglev vehicle of the urban rail transit 城市轨道交通中低速磁浮车辆悬浮控制系统技术条件 |
China National Standards di |
English PDF |
GB/T 39873-2021 |
Determination of quaternary ammonium salt in disinfectant—Liquid chromatography-tandem mass spectrometry 消毒剂中季铵盐的测定 液相色谱-串联质谱法 |
China National Standards di |
English PDF |
GB/T 39872-2021 |
Data specification for disclosure of technical indicators in standard literature 标准文献技术指标揭示数据规范 |
China National Standards di |
English PDF |
GB/T 39866-2021 |
Technical requirement of appendent frame for window and door in building 建筑门窗附框技术要求 |
China National Standards di |
English PDF |
GB/T 39864-2021 |
Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency 锰酸锂电化学性能测试 首次放电比容量及首次充放电效率测试方法 |
China National Standards di |
English PDF |
GB/T 39861-2021 |
Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life 锰酸锂电化学性能测试 放电平台容量比率及循环寿命测试方法 |
China National Standards di |
English PDF |
GB/T 39860-2021 |
Rapid identification of the surface residual mineral powder on latex products—X-ray diffraction spectrometry 胶乳制品表面残余矿物粉末的快速鉴别 X-射线衍射法 |
China National Standards di |
English PDF |
GB/T 39851.2-2021 |
Road vehicles—diagnostic communication over Controller Area Network (DoCAN) —Part 2:Transport protocol and network layer services 道路车辆 基于控制器局域网的诊断通信 第2部分:传输层协议和网络层服务 |
China National Standards di |
English PDF |
GB/T 39848-2021 |
Methods of measurement for flat panel display color gamut 平板显示器色域测量方法 |
China National Standards di |
English PDF |
GB/T 39846-2021 |
LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between trunking core network and dispach console 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 集群核心网到调度台接口 |
China National Standards di |
English PDF |
GB/T 39843-2021 |
Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films 电子学特性测量 大面积超导膜的局域临界电流密度及其分布 |
China National Standards di |
English PDF |
GB/T 39833-2021 |
Test method for coal combustion characteristics—One-dimensional furnaces method 煤的燃烧特性测定方法 一维炉法 |
China National Standards di |
English PDF |
GB/T 39831-2021 |
Hydraulic fluid power—Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10—Clamping dimensions 液压传动 规格02、03、05、07、08和10的四油口叠加阀和方向控制阀 夹紧尺寸 |
China National Standards di |
English PDF |
GB/T 39821-2021 |
Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards di |
English PDF |
GB/T 39819-2021 |
Conveyor belts—Determination of minimum transition distance on three idler rollers 输送带 三辊托辊最小过渡距离的确定 |
China National Standards di |
English PDF |
GB/T 39818-2021 |
Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards di |
English PDF |
GB/T 39801-2021 |
General technical specifications of membrane distillation device for seawater and brackish water desalination 海水或苦咸水淡化用膜蒸馏装置通用技术规范 |
China National Standards di |
English PDF |
GB/T 39799-2021 |
dimension,shape,weight and tolerances for titanium and titanium alloy bars and wires 钛及钛合金棒材和丝材尺寸、外形、重量及允许偏差 |
China National Standards di |
English PDF |
GB/T 39787-2021 |
Coordinate system of BeiDou navigation satellite system 北斗卫星导航系统坐标系 |
China National Standards di |
English PDF |
GB/T 39779-2021 |
Design guidelines for distributed energy system of combined cooling, heating and power 分布式冷热电能源系统设计导则 |
China National Standards di |
English PDF |
GB/T 39771.2-2021 |
Optical radiation safety of LEDs—Part 2: Measurement methods 半导体发光二极管光辐射安全 第2部分:测试方法 |
China National Standards di |
English PDF |
GB/T 39771.1-2021 |
Optical radiation safety of LEDs—Part 1: Safety requirements and classification 半导体发光二极管光辐射安全 第1部分:要求与等级分类方法 |
China National Standards di |
English PDF |
GB/T 39768-2021 |
Classification and coding for human biomaterial 人类生物样本分类与编码 |
China National Standards di |
English PDF |
GB/T 39765-2021 |
Determination of benzene,methylbenzene,ethylbenzene,dimethybenzene in stationery—Gas chromatographic method 文具中苯、甲苯、乙苯及二甲苯的测定方法 气相色谱法 |
China National Standards di |
English PDF |
GB/T 39761.1-2021 |
Green product assessment—Household electric appliances—Part 1:Refrigerators, air-conditioners and washing machines 绿色产品评价 家用电器 第1部分:电冰箱、空调器和洗衣机 |
China National Standards di |
English PDF |
GB/T 39754-2021 |
Hot dip coating steel sheet and strip for corrugated pipe 波纹管用热镀层钢板及钢带 |
China National Standards di |
English PDF |
GB/T 39744-2021 |
General requirements of mechanical product electronic manual based on three-dimensional model 基于三维模型的机械产品电子手册编制通用要求 |
China National Standards di |
English PDF |
GB/T 39743-2021 |
Plain bearings—Thermoplastic bushes—dimensions and tolerance 滑动轴承 热塑性塑料轴套 尺寸与公差 |
China National Standards di |
English PDF |
GB/T 39600-2021 |
Formaldehyde emission grading for wood-based panel and finishing products 人造板及其制品甲醛释放量分级 |
China National Standards di |
English PDF |
GB/T 39598-2021 |
A guide to the limited quantity in indoor loading for wood-based panel based on its ultimate formaldehyde emission 基于极限甲醛释放量的人造板室内承载限量指南 |
China National Standards di |
English PDF |
GB/T 34079.1-2021 |
Service specification of electronic government common platform based on cloud computing -- Part 1: Service catalog and coding 基于云计算的电子政务公共平台服务规范 第1部分:服务分类与编码 |
China National Standards di |
English PDF |
GB/T 28847.5-2021 |
Building automation and control systems—Part 5: Data communication protocol 建筑自动化和控制系统 第5部分:数据通信协议 |
China National Standards di |
English PDF |
GB/T 28267.1-2021 |
Steel cord conveyor belts—Part 1:Design,dimensions and mechanical requirements for conveyor belts for general use 钢丝绳芯输送带 第1部分:普通用途输送带的设计、尺寸和机械要求 |
China National Standards di |
English PDF |
GB/T 25388.1-2021 |
Wind turbines generator system—Double-fed converter—Part 1: Technical condition 风力发电机组 双馈式变流器 第1部分:技术条件 |
China National Standards di |
English PDF |
GB/T 25386.1-2021 |
Wind turbines—Control system—Part 1:Technical condition 风力发电机组 控制系统 第1部分:技术条件 |
China National Standards di |
English PDF |
GB/T 20833.4-2021 |
Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index 旋转电机 绕组绝缘 第4部分:绝缘电阻和极化指数测量 |
China National Standards di |
English PDF |
GB/T 20833.1-2021 |
Rotating electrical machines—The winding insulation—Part 1:Off-line partial discharge measurements 旋转电机 绕组绝缘 第1部分:离线局部放电测量 |
China National Standards di |
English PDF |
GB/T 20645-2021 |
Specific environmental condition—Technical requirements of low-voltage apparatuses for plateau 特殊环境条件 高原用低压电器技术要求 |
China National Standards di |
English PDF |
GB/T 19237-2021 |
Compressed natural gas dispenser for vehicles 汽车用压缩天然气加气机 |
China National Standards di |
English PDF |
GB/T 18638-2021 |
diagnostic techniques for Japanese encephalitis 流行性乙型脑炎诊断技术 |
China National Standards di |
English PDF |
GB/T 18400.10-2021 |
Test conditions for machining centres—Part 10:Evaluation of thermal distortions 加工中心检验条件 第10部分:热变形的评定 |
China National Standards di |
English PDF |
GB/T 17215.221-2021 |
Electricity metering equipment(a. c. ) -- General requirements, tests and test conditions -- Part 21: Tariff and load control equipment 电测量设备(交流) 通用要求、试验和试验条件 第21部分:费率和负荷控制设备 |
China National Standards di |
English PDF |
GB/T 14383-2021 |
Forged fittings, socket-welding and threaded 锻制承插焊和螺纹管件 |
China National Standards di |
English PDF |
GB/T 14352.19-2021 |
Methods for chemical analysis of tungsten ores and molybdenum ores -- Part 19: Determination of bismuth, cadmium, cobalt, copper, iron, lithium, nickel, phosphorus, lead, strontium, vanadium and zinc content -- Inductive-coupled plasma atomic emission spe 钨矿石、钼矿石化学分析方法 第19部分:铋、镉、钴、铜、铁、锂、镍、磷、铅、锶、钒和锌量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards di |
English PDF |
GB/T 12668.902-2021 |
Adjustable speed electrical power drive systems—Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications—Energy efficiency indicators for power drive systems and motor starters 调速电气传动系统 第9-2部分:电气传动系统、电机起动器、电力电子设备及其传动应用的生态设计 电气传动系统和电机起动器的能效指标 |
China National Standards di |
English PDF |
GB/T 11313.41-2021 |
Radio-frequency connectors—Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors 射频连接器 第41部分: CQA系列快速锁紧射频连接器分规范 |
China National Standards di |
English PDF |
GB/T 11313.40-2021 |
Radio-frequency connectors—Part 40: Sectional specification for 2.4 series R.F. connectors 射频连接器 第40部分: 2.4系列射频连接器分规范 |
China National Standards di |
English PDF |
GB/T 11313.35-2021 |
Radio-frequency connectors—Part 35: Sectional specification for 2.92 series R.F connectors 射频连接器 第35部分: 2.92系列射频连接器分规范 |
China National Standards di |
English PDF |
GB/T 10001.6-2021 |
Public information graphical symbols—Part 6: Symbols for medical treatment and health care 公共信息图形符号 第6部分:医疗保健符号 |
China National Standards di |
English PDF |
GB/T 7092-2021 |
Outline dimensions of semiconductor integrated circuits 半导体集成电路外形尺寸 |
China National Standards di |
English PDF |
GB/T 5824-2021 |
Size system of opening for windows and doors in building 建筑门窗洞口尺寸系列 |
China National Standards di |
English PDF |
GB/T 5095.2507-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) 电子设备用机电元件 基本试验规程及测量方法 第25-7部分:试验25g:阻抗、反射系数和电压驻波比(VSWR) |
China National Standards di |
English PDF |
GB/T 5095.2303-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法 |
China National Standards di |
English PDF |
GB/T 4892-2021 |
dimensions of rigid rectangular transport packages 硬质直方体运输包装尺寸系列 |
China National Standards di |
English PDF |
GB/T 4797.9-2021 |
Classification of environmental conditions—Environmental conditions appearing in nature—Measured shock and vibration data during storage, transportation and in-use 环境条件分类 自然环境条件 贮存、运输和使用过程中测得的冲击和振动数据 |
China National Standards di |
English PDF |
GB/T 4022.1-2021 |
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table—Testing of the accuracy—Part 1:Machines with table surface length of up to 1600 mm 卧轴矩台平面磨床 精度检验 第1部分:工作台面长度至1600mm的机床 |
China National Standards di |
English PDF |
GB/T 2680-2021 |
Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors 建筑玻璃 可见光透射比、太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定 |
China National Standards di |
English PDF |
GB/T 1406.3-2021 |
Types and dimensions of lamp caps—Part 3:Prefocus caps 灯头的型式和尺寸 第3部分:预聚焦式灯头 |
China National Standards di |
English PDF |
GB/T 41020-2021 |
Guidance on building fire risk assessment for property insurance 建筑物财产保险火灾风险评估指南 |
China National Standards di |
English PDF |
GB/T 9254.1-2021 |
Information technology equipment, multimedia equipment and receivers -- Electromagnetic compatibility -- Part 1: Emission requirements 信息技术设备、多媒体设备和接收机 电磁兼容 第1部分:发射要求 |
China National Standards di |
English PDF |
GB/T 283-2021 |
Rolling bearings—Cylindrical roller bearings—Boundary dimensions 滚动轴承 圆柱滚子轴承 外形尺寸 |
China National Standards di |
English PDF |
GB/T 34273-2021 |
Standard test method for calculated cetane index of coal liquefaction diesel—Four variable equetion 煤液化柴油十六烷指数计算法 四变量公式法 |
China National Standards di |
English PDF |
GB/T 8563.3-2021 |
Classification and codes for information of reward and disciplinary action -- Part 3: Codes of disciplinary action and organizational punishment 奖励、纪律处分信息分类与代码? 第3部分:纪律处分和组织处理代码 |
China National Standards di |
English PDF |
GB/T 22178-2021 |
Oxadiazon emulsifiable concentrates 噁草酮乳油 |
China National Standards di |
English PDF |
GB/T 22173-2021 |
Oxadiazon technical material 噁草酮原药 |
China National Standards di |
English PDF |
GB/T 15981-2021 |
Evaluating method for the efficacy of sterilization for disinfection equipment 消毒器械灭菌效果评价方法 |
China National Standards di |
English PDF |
GB/T 15579.14-2021 |
Arc welding equipment -- Part 14: Calibration, validation and consistency testing 弧焊设备 第14部分:校准、确认和一致性试验 |
China National Standards di |
English PDF |
GB/T 41043-2021 |
Coordinative development effectiveness evaluation indicator and method of coal and coalbed methane 煤与煤层气协调开发效果评价指标及计算方法 |
China National Standards di |
English PDF |
GB/T 41116-2021 |
Non-destructive testing of welds—Time-of-flight diffraction technique (TOFD)—Acceptance levels 焊缝无损检测 衍射时差技术(TOFD) 验收等级 |
China National Standards di |
English PDF |
GB/T 41115-2021 |
Non-destructive testing of welds -- Ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) 焊缝无损检测 超声检测 衍射时差技术(TOFD)的应用 |
China National Standards di |
English PDF |
GB/T 41107.2-2021 |
Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第2部分:自拘束试验 |
China National Standards di |
English PDF |
GB/T 41107.1-2021 |
Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第1部分:总则 |
China National Standards di |
English PDF |
GB/T 17743-2021 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰特性的限值和测量方法 |
China National Standards di |
English PDF |
GB/T 8563.1-2021 |
Classification and codes for information of reward and disciplinary action -- Part 1: Codes of medal, honorary title and reward 奖励、纪律处分信息分类与代码 第1部分:勋章、荣誉称号和表彰奖励代码 |
China National Standards di |
English PDF |
GB/T 13976-2021 |
Radioactive source term of pressurized water reactor nuclear power plant for operation states 压水堆核电厂运行状态下的放射性源项 |
China National Standards di |
English PDF |
GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分:拉弯法 |
China National Standards di |
English PDF |
GB/T 6113.104-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards di |
English PDF |
GB/T 6113.101-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus 无线电骚扰和抗扰度测量设备和测量方法规范 第1-1部分:无线电骚扰和抗扰度测量设备 测量设备 |
China National Standards di |
English PDF |
GB/T 2384-2021 |
Dyes intermediates—General method for the determination of melting range 染料中间体 熔点范围测定通用方法 |
China National Standards di |
English PDF |
GB/T 41108.1-2021 |
Safety of machinery -- Safety requirements for interlocking devices -- Part 1: direct opening position switches 机械安全 联锁装置的安全要求 第1部分:直接断开位置开关 |
China National Standards di |
English PDF |
GB/T 3670-2021 |
Covered electordes for manual metal arc welding of copper and copper alloys 铜及铜合金焊条 |
China National Standards di |
English PDF |
GB/T 41111-2021 |
Rods for gas welding of non-alloy and creep-resisting steels 气焊用非合金钢及热强钢填充丝 |
China National Standards di |
English PDF |
GB/T 41110-2021 |
Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys 镍及镍合金药芯焊丝 |
China National Standards di |
English PDF |
GB/T 41112-2021 |
Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys 镁及镁合金焊丝 |
China National Standards di |
English PDF |
GB/T 41123.3-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification 无损检测 工业射线计算机层析成像检测 第3部分:验证 |
China National Standards di |
English PDF |
GB/T 41123.2-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation 无损检测 工业射线计算机层析成像检测 第2部分:操作和解释 |
China National Standards di |
English PDF |
GB/T 41123.1-2021 |
Non-destructive testing -- Radiation methods for industrial computed tomography -- Part 1: Principles, equipment and samples 无损检测 工业射线计算机层析成像检测 第1部分:原理、设备和样品 |
China National Standards di |
English PDF |
GB/T 12604.12-2021 |
Non-destructive testing -- Terminology -- Part 12: Radiation methods for industrial computed tomography 无损检测? 术语? 第12部分:工业射线计算机层析成像检测 |
China National Standards di |
English PDF |
GB/T 41105.1-2021 |
Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method 无损检测 X射线管电压的测量和评价 第1部分:分压法 |
China National Standards di |
English PDF |
GB/T 20346.1-2021 |
Equipment for distributing fertilizer—Part 1: Full width fertilizer distributors 施肥机械 第1部分:全幅宽撒肥机 |
China National Standards di |
English PDF |
GB/T 8593.2-2021 |
Earth-moving machinery—Symbols for operator controls and other displays—Part 2:Symbols for specific machines,equipment and accessories 土方机械 司机操纵装置和其他显示装置用符号 第2部分:机器、工作装置和附件的特殊符号 |
China National Standards di |
English PDF |
GB/T 8593.1-2021 |
Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols 土方机械? 司机操纵装置和其他显示装置用符号? 第1部分:通用符号 |
China National Standards di |
English PDF |
GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分:减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards di |
English PDF |
GB/T 3637-2021 |
Liquid sulphur dioxide 液体二氧化硫 |
China National Standards di |
English PDF |
GB/T 6445-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范(GPS)和公差值 |
China National Standards di |
English PDF |
GB/T 38055.4-2021 |
Rough-terrain trucks—User requirements—Part 4: Additional requirements for variable-reach trucks handling freely suspended loads 越野叉车 对用户的要求 第4部分:悬吊可自由摆动载荷伸缩臂式叉车的附加要求 |
China National Standards di |
English PDF |
GB/T 41135.2-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 2: System aspects 故障路径指示用电流和电压传感器或探测器?? 第2部分:系统应用 |
China National Standards di |
English PDF |
GB/T 41135.1-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 1: General principles and requirements 故障路径指示用电流和电压传感器或探测器?? 第1部分:通用原理和要求 |
China National Standards di |
English PDF |
GB/T 26024-2021 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards di |
English PDF |
Find out:13477Items | To Page of: First -Previous-Next -Last | [11] [12] [13] [14] [15] [16] [17] |