GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 8190.10-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分:压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards di |
English PDF |
GB/T 5772-2010 |
Injector nozzle for diesel - Specifications 柴油机喷油嘴偶件 技术条件 |
China National Standards di |
English PDF |
GB/T 5771-2010 |
Delivery valve of diesel fuel injection pump - Specifications 柴油机喷油泵出油阀偶件 技术条件 |
China National Standards di |
English PDF |
GB/T 5264-2010 |
plunger of diesel fuel injection pump - Specifications 柴油机喷油泵柱塞偶件 技术条件 |
China National Standards di |
English PDF |
GB/T 25421-2010 |
No-tillage seeding drill for the grass 牧草免耕播种机 |
China National Standards di |
English PDF |
GB/T 25418-2010 |
Rice direct seeder with soil cover 水稻覆土直播机 |
China National Standards di |
English PDF |
GB/T 25392-2010 |
Agricultural engineering - Electrical and electronic equipment - Testing resistance to environmental conditions 农业工程 电气和电子设备 对环境条件的耐久试验 |
China National Standards di |
English PDF |
GB/T 25389.1-2010 |
Wind turbine low-speed permanent magnet synchronous generator - Part 1: Technical conditions 风力发电机组 低速永磁同步发电机 第1部分:技术条件 |
China National Standards di |
English PDF |
GB/T 25388.1-2010 |
Double-fed converter of wind turbine generator system - Part 1: Technical condition 风力发电机组 双馈式变流器 第1部分:技术条件 |
China National Standards di |
English PDF |
GB/T 25387.1-2010 |
Full-power converter of wind turbine generator systems - Part 1: Technical condition 风力发电机组 全功率变流器 第1部分:技术条件 |
China National Standards di |
English PDF |
GB/T 25386.1-2010 |
Wind turbine generator system variable speed constant frequency control system - Part 1: Technical condition 风力发电机组 变速恒频控制系统 第1部分:技术条件 |
China National Standards di |
English PDF |
GB/T 25379.2-2010 |
Modular units for machine tools - Workholding pallets - Part 2: Workholding pallets of nominal size greater than 800 mm 机床通用部件 工件随行托板 第2部分:名义尺寸大于800mm的工件随行托板 |
China National Standards di |
English PDF |
GB/T 25379.1-2010 |
Modular units for machine tools - Workholding pallets - Part 1: Workholding pallets up to 800 mm nominal size 机床通用部件 工件随行托板 第1部分:名义尺寸至800mm的工件随行托板 |
China National Standards di |
English PDF |
GB/T 25378-2010 |
Collets with 8°setting angle for tool shanks - Collets,nuts and fitting dimensions 工具柄用8°安装锥的弹簧夹头 弹簧夹头、螺母和配合尺寸 |
China National Standards di |
English PDF |
GB/T 25368-2010 |
Electronic control common rail fuel injection system for diesel engines - The high-pressure supply pump - Specifications 柴油机电控共轨喷油系统高压供油泵总成 技术条件 |
China National Standards di |
English PDF |
GB/T 25367-2010 |
Electronic control common rail fuel injection system for diesel engines - The injector - Specifications 柴油机电控共轨喷油系统喷油器总成 技术条件 |
China National Standards di |
English PDF |
GB/T 25366-2010 |
Electronic control common rail fuel injection system for diesel engines - The rail - Specifications 柴油机电控共轨喷油系统共轨管总成 技术条件 |
China National Standards di |
English PDF |
GB/T 25365.1-2010 |
Electronic control common rail fuel injection system for diesel engines - Specifications - Part 1: Machinery 柴油机电控共轨喷油系统总成 技术条件 第1部分:机械 |
China National Standards di |
English PDF |
GB/T 25357-2010 |
Petroleum, petrochemical and natural gas industries - Process positive-displacement rotary-type compressors 石油、石化及天然气工业流程用容积式回转压缩机 |
China National Standards di |
English PDF |
GB/T 25343.5-2010 |
Railway applications - Welding of railway vehicles and components - Part 5: Inspection,testing and documentation 铁路应用 轨道车辆及其零部件的焊接 第5部分:检验、试验及文件 |
China National Standards di |
English PDF |
GB/T 25343.4-2010 |
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements 铁路应用 轨道车辆及其零部件的焊接 第4部分:生产要求 |
China National Standards di |
English PDF |
GB/T 25343.3-2010 |
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements 铁路应用 轨道车辆及其零部件的焊接 第3部分:设计要求 |
China National Standards di |
English PDF |
GB/T 25343.2-2010 |
Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer 铁路应用 轨道车辆及其零部件的焊接 第2部分:焊接制造商的质量要求及认证 |
China National Standards di |
English PDF |
GB/T 25343.1-2010 |
Railway applications - Welding of railway vehicles and components - Part 1: General 铁路应用 轨道车辆及其零部件的焊接 第1部分:总则 |
China National Standards di |
English PDF |
GB/T 25334.1-2010 |
Technical specification for railway locomotive car body - Part 1: diesel locomotiver car body 铁道机车车体技术条件 第1部分:内燃机车车体 |
China National Standards di |
English PDF |
GB/T 25333-2010 |
Labels of diesel locomotive & electric locomotive 内燃、电力机车标记 |
China National Standards di |
English PDF |
GB/T 25331-2010 |
Radiator for converter of electric locomotive and electric motor units 电力机车、电力动车组主变流器用水散热器 |
China National Standards di |
English PDF |
GB/T 18400.7-2010 |
Test conditions for machining centres - Part 7: Accuracy of a finished test piece 加工中心检验条件 第7部分:精加工试件精度检验 |
China National Standards di |
English PDF |
GB/T 18400.5-2010 |
Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets 加工中心检验条件 第5部分:工件夹持托板的定位精度和重复定位精度检验 |
China National Standards di |
English PDF |
GB/T 18400.4-2010 |
Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 加工中心检验条件 第4部分:线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards di |
English PDF |
GB/T 18400.2-2010 |
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 加工中心检验条件 第2部分:立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴) |
China National Standards di |
English PDF |
GB/T 18400.1-2010 |
Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z -axis) 加工中心检验条件 第1部分:卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards di |
English PDF |
GB/T 10961-2010 |
Woodworking machines - Symbols for indications 木工机床 操作指示形象化符号 |
China National Standards di |
English PDF |
GB/T 25283-2010 |
Specification for comprehensive exploration and evaluation of mineral resources+(No.1 modification sheet) 矿产资源综合勘查评价规范+(第1号修改单) |
China National Standards di |
English PDF |
GB/T 25282-2010 |
Soil and sediment - Sequential extraction procedure of speciation of 13 trace elements 土壤和沉积物 13个微量元素形态顺序提取程序 |
China National Standards di |
English PDF |
GB/T 17418.6-2010 |
Methods for analysis of noble metals in geochemical samples - Part 6: Determination of platinum, palladium and gold content - Preconcentration by fire assay - emission spectrometry 地球化学样品中贵金属分析方法 第6部分:铂量、钯量和金量的测定 火试金富集-发射光谱法 |
China National Standards di |
English PDF |
GB/T 17418.5-2010 |
Methods for analysis of noble metals in geochemical samples - Part 5: Determination of ruthenium and osmium content - Separationby distillation-catalytic spectrophotometric method 地球化学样品中贵金属分析方法 第5部分:钌量和锇量的测定 蒸馏分离-催化分光光度法 |
China National Standards di |
English PDF |
GB/T 17418.4-2010 |
Methods for analysis of noble metals in geochemical samples - Part 4: Determination of iridium content - Preconcentration by thiourea-catalytic spectrophotometric method 地球化学样品中贵金属分析方法 第4部分:铱量的测定 硫脲富集-催化分光光度法 |
China National Standards di |
English PDF |
GB/T 17418.3-2010 |
Methods for analysis of noble metals in geochemical samples - Part 3: Determination of palladium content - Preconcentration by thiourea - graphite furnace atomic absorption spectrophotometric method 地球化学样品中贵金属分析方法 第3部分:钯量的测定 硫脲富集-石墨炉原子吸收分光光度法 |
China National Standards di |
English PDF |
GB/T 17418.2-2010 |
Methods for analysis of noble metals in geochemical samples - Part 2:Determination of platinum and rhodium content-Preconcentration by thiourea-catalytic polarographic method 地球化学样品中贵金属分析方法 第2部分:铂量和铑量的测定 硫脲富集-催化极谱法 |
China National Standards di |
English PDF |
GB/T 17417.2-2010 |
Method for chemical analysis of rare earth ores - Part 2: Determination of scandium content 稀土矿石化学分析方法 第2部分:钪量测定 |
China National Standards di |
English PDF |
GB/T 17413.3-2010 |
Methods for chemical analysis of lithium、rubidium and cesium ores - Part 3: Determination of cesium content 锂矿石、铷矿石、铯矿石化学分析方法 第3部分:铯量测定 |
China National Standards di |
English PDF |
GB/T 17413.2-2010 |
Methods for chemical analysis of lithium、rubidium and cesium ores - Part 2: Determination of rubidium content 锂矿石、铷矿石、铯矿石化学分析方法 第2部分:铷量测定 |
China National Standards di |
English PDF |
GB/T 17413.1-2010 |
Methods for chemical analysis of lithium、rubidium and cesium ores - Part 1: Determination of lithium content 锂矿石、铷矿石、铯矿石化学分析方法 第1部分:锂量测定 |
China National Standards di |
English PDF |
GB/T 14840-2010 |
Methods for chemical analysis of limestones - Determination of free silicon dioxide content 石灰岩化学分析方法 游离二氧化硅量测定 |
China National Standards di |
English PDF |
GB/T 14506.8-2010 |
Methods for chemical analysis of silicate rocks - Part 8: Determination of titanium dioxide content 硅酸盐岩石化学分析方法 第8部分:二氧化钛量测定 |
China National Standards di |
English PDF |
GB/T 14506.3-2010 |
Methods for chemical analysis of silicate rocks - Part 3: Determination of silicon dioxide content 硅酸盐岩石化学分析方法 第3部分:二氧化硅量测定 |
China National Standards di |
English PDF |
GB/T 14506.29-2010 |
Methods for chemical analysis of silicate rocks - Part 29: Determination of 22 elements including rare earth elements 硅酸盐岩石化学分析方法 第29部分:稀土等22个元素量测定 |
China National Standards di |
English PDF |
GB/T 14506.22-2010 |
Methods for chemical analysis of silicate rocks - Part 22: Determination of vanadium content 硅酸盐岩石化学分析方法 第22部分:钒量测定 |
China National Standards di |
English PDF |
GB/T 14506.16-2010 |
Methods for chemical analysis of silicate rocks - Part 16: Determination of rubidium content 硅酸盐岩石化学分析方法 第16部分:铷量测定 |
China National Standards di |
English PDF |
GB/T 14506.11-2010 |
Methods for chemical analysis of silicate rocks - Part 11: Determination of potassium oxide and sodium oxide content 硅酸盐岩石化学分析方法 第11部分:氧化钾和氧化钠量测定 |
China National Standards di |
English PDF |
GB/T 13073-2010 |
Rock samples - Determination of radium - 226 - Emanation technique 岩石样品 226Ra的测定 射气法 |
China National Standards di |
English PDF |
GB/T 13072-2010 |
Geological water samples - Determination of radioactive ratio 226Ra/228Ra - Emanation - β counting techniques 地质水样 226Ra/228Ra 放射性活度比值测定 射气法 - β 法 |
China National Standards di |
English PDF |
GB/T 13071-2010 |
Geological waters samples - Determination of radioactive ratios 234U/238U and 230Th/232Th - Extraction chromatograph and alpha spectrometry measure 地质水样 234U/238U、230Th/232Th 放射性活度比值的测定 - 萃淋树脂萃取色层分离 α 能谱法 |
China National Standards di |
English PDF |
GB/T 50640-2010 |
Evaluation standard for green construction of building 建筑工程绿色施工评价标准 |
China National Standards di |
English PDF |
GB/T 50627-2010 |
Evaluation standard for district heating system 城镇供热系统评价标准 |
China National Standards di |
English PDF |
GB/T 50624-2010 |
Code for acceptance of communication engineering in residential districts and residential buildings 住宅区和住宅建筑内通信设施工程验收规范 |
China National Standards di |
English PDF |
GB/T 50006-2010 |
Standard for modular coordination of industrial buildings 厂房建筑模数协调标准 |
China National Standards di |
English PDF |
GB 50631-2010 |
Technical code for private mail boxes of residential buildings 住宅信报箱工程技术规范 |
China National Standards di |
English PDF |
GB/T 25500.2-2010 |
Extensible Business Reporting Language(XBRL) specification - Part 2:dimensions 可扩展商业报告语言(XBRL)技术规范 第2部分:维度 |
China National Standards di |
English PDF |
GB/T 14308-2010 |
Classification & Accreditation for Star-rated tourist hotels 旅游饭店星级的划分与评定 |
China National Standards di |
English PDF |
GB 25464-2010 |
The discharge standard of pollutants and method of measure for cermic industry 陶瓷工业污染物排放标准 |
China National Standards di |
English PDF |
GB 25463-2010 |
discharge standard of water pollutants for printing ink industry 油墨工业水污染物排放标准 |
China National Standards di |
English PDF |
GB 25462-2010 |
The discharge standard of water pollutants for yeast industry 酵母工业水污染物排放标准 |
China National Standards di |
English PDF |
GB 25461-2010 |
discharge standards of water pollutants for starch industry 淀粉工业水污染物排放标准 |
China National Standards di |
English PDF |
GB/T 25278-2010 |
Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers 塑料 用毛细管和狭缝口模流变仪测定塑料的流动性 |
China National Standards di |
English PDF |
GB/T 25277-2010 |
Plastics - Determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations - liquid chromatography (LC) 塑料 均聚聚丙烯(PP-H)中酚类抗氧剂和芥酸酰胺爽滑剂的测定 液相色谱法 |
China National Standards di |
English PDF |
GB/T 25276-2010 |
Triacetyl cellulose (TAC) films for liquid crystal display(LCD)- Determination of thickness 液晶显示器(LCD)用三醋酸纤维素酯(TAC)膜 厚度测定方法 |
China National Standards di |
English PDF |
GB/T 25275-2010 |
Polarizing film for Liquid Crystal display (LCD) - Method of test for the properties of photics and weather resistance 液晶显示器(LCD)用偏振片 光学性能和耐候性能测试方法 |
China National Standards di |
English PDF |
GB/T 25274-2010 |
Films for liquid crystal display(LCD) - Determination of ultraviolet absorbance 液晶显示器(LCD)用薄膜 紫外吸收率测定方法 |
China National Standards di |
English PDF |
GB/T 25273-2010 |
Films for liquid crystal display(LCD) - Determination of haze with integrating sphere 液晶显示器(LCD)用薄膜 雾度测定方法 积分球法 |
China National Standards di |
English PDF |
GB/T 25266-2010 |
Paints - Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method 涂料 用安德森滴管法测定涂料填充物颗粒粒度的分布 |
China National Standards di |
English PDF |
GB/T 25265.1-2010 |
Photography and imaging - Inkjet media: classification,nomenclature and dimensions - Part 1: Photo-grade media(paper and film) 摄影和成像 喷墨介质:分类、命名和尺寸 第1部分:照相级介质(纸和胶片) |
China National Standards di |
English PDF |
GB/T 25261-2010 |
Solar heat reflecting insulation coatings for buildings 建筑用反射隔热涂料 |
China National Standards di |
English PDF |
GB/T 25260.1-2010 |
Synthetic rubber latex - Part 1: Carboxyl styrene-butadiene rubber latex (XSBRL)56C、55B 合成胶乳 第1部分:羧基丁苯胶乳(XSBRL)56C、55B |
China National Standards di |
English PDF |
GB/T 25248-2010 |
The determination of infrared cyanine dye for 830nm digital printing materials - High performance liquid chromatography 830nm数字制版材料用红外吸收菁染料含量的测定 高效液相色谱法 |
China National Standards di |
English PDF |
GB/T 1632.3-2010 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第3部分:聚乙烯和聚丙烯 |
China National Standards di |
English PDF |
GB/T 12008.5-2010 |
Plastics - Polyether polyols - Part 5:Determination of acidity as acid number 塑料 聚醚多元醇 第5部分:酸值的测定 |
China National Standards di |
English PDF |
GB/T 15597.2-2010 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样制备和性能测定 |
China National Standards di |
English PDF |
GB/T 1033.2-2010 |
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method 塑料 非泡沫塑料密度的测定 第2部分:密度梯度柱法 |
China National Standards di |
English PDF |
GB 25130-2010 |
Safety requirements for unitary air-Conditioners 单元式空气调节机 安全要求 |
China National Standards di |
English PDF |
GB 16999-2010 |
Universal technical requirements of RMB - Banknote discriminating device 人民币鉴别仪通用技术条件 |
China National Standards di |
English PDF |
GB/T 8572-2010 |
Determination of total nitrogen content for compound fertilizers titrimetric method after distillation 复混肥料中总氮含量的测定 蒸馏后滴定法 |
China National Standards di |
English PDF |
GB/T 5517-2010 |
Inspection of grain and oils - Determination of acidity in grain and produce 粮油检验 粮食及制品酸度测定 |
China National Standards di |
English PDF |
GB/T 25247-2010 |
Feed additive - Saccharicterpenin 饲料添加剂 糖萜素 |
China National Standards di |
English PDF |
GB/T 25161.2-2010 |
Packaging sacks - dimensional tolerances - Part 2: Sacks made from thermoplastic flexible film 包装袋 尺寸允许偏差 第2部分:热塑性软质薄膜袋 |
China National Standards di |
English PDF |
GB/T 25161.1-2010 |
Packaging sacks - dimensional tolerances - Part 1: Paper sacks 包装袋 尺寸允许偏差 第1部分:纸袋 |
China National Standards di |
English PDF |
GB/T 25160-2010 |
Packaging - dimensions of folding cartons of cartonboard 包装 卡纸板折叠纸盒结构尺寸 |
China National Standards di |
English PDF |
GB/T 25159-2010 |
Intermediate bulk containers(IBCs)for non-dangerous goods - Terminology 包装术语 非危险货物用中型散装容器 |
China National Standards di |
English PDF |
GB/T 25157-2010 |
Inspections methods of injection moulding machines for rubber and plastics 橡胶塑料注射成型机检测方法 |
China National Standards di |
English PDF |
GB/T 25156-2010 |
General specifications of injection moulding machines for rubber and plastics 橡胶塑料注射成型机通用技术条件 |
China National Standards di |
English PDF |
GB/T 25224.2-2010 |
Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography ( HPLC ) 动植物油脂 植物油中豆甾二烯的测定 第2部分:高效液相色谱法 |
China National Standards di |
English PDF |
GB/T 25223-2010 |
Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method 动植物油脂 甾醇组成和甾醇总量的测定 气相色谱法 |
China National Standards di |
English PDF |
GB 25201-2010 |
Maintenance management for building fire equipments 建筑消防设施的维护管理 |
China National Standards di |
English PDF |
GB 16669-2010 |
General technical specifications for components of carbon dioxide fire extinguishing systems 二氧化碳灭火系统及部件通用技术条件 |
China National Standards di |
English PDF |
GB/T 5464-2010 |
Non-combustibility test method for building materials 建筑材料不燃性试验方法 |
China National Standards di |
English PDF |
GB/T 480-2010 |
Test of low temperature distillation of coal by aluminum retort 煤的铝甑低温干馏试验方法 |
China National Standards di |
English PDF |
GB/T 25216-2010 |
Regional prediction methods for the danger of coal and gas outburst 煤与瓦斯突出危险性区域预测方法 |
China National Standards di |
English PDF |
GB/T 25212-2010 |
Classification and quality grading for blue-coke 兰炭产品品种及等级划分 |
China National Standards di |
English PDF |
GB/T 25206.2-2010 |
Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms 复合夹芯板建筑体燃烧性能试验 第2部分:大室法 |
China National Standards di |
English PDF |
Find out:13477Items | To Page of: First -Previous-Next -Last | [74] [75] [76] [77] [78] [79] [80] |