GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 5535.1-2008 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Part 1: Method using diethyl ether extraction 动植物油脂 不皂化物测定 第1部分:乙醚提取法 |
China National Standards di |
English PDF |
GB/T 5515-2008 |
Inspection of grain and oils - Determination of crude fibre content in grain - Method with intermediate filtration 粮油检验 粮食中粗纤维素含量测定 介质过滤法 |
China National Standards di |
English PDF |
GB/T 22332-2008 |
diagnostic techniques for duck virus enteritis 鸭病毒性肠炎诊断技术 |
China National Standards di |
English PDF |
GB/T 22330.9-2008 |
Standard for specified animal disease free zone - Part 9: Bovine spongiform encephalopathy free zone 无规定动物疫病区标准 第9部分:无牛海绵状脑病区 |
China National Standards di |
English PDF |
GB/T 22330.8-2008 |
Standard for specified animal disease free zone - Part 8: Contagious bovine pleuropneumonia free zone 无规定动物疫病区标准 第8部分:无牛传染性胸膜肺炎区 |
China National Standards di |
English PDF |
GB/T 22330.7-2008 |
Specified animal disease free zone - Part 7: Rinderpest free zone 无规定动物疫病区标准 第7部分:无牛瘟区 |
China National Standards di |
English PDF |
GB/T 22330.6-2008 |
Standard for specified animal disease free zone - Part 6: African horse sickness free zone 无规定动物疫病区标准 第6部分:无非洲马瘟区 |
China National Standards di |
English PDF |
GB/T 22330.5-2008 |
Standard for specified animal disease free zone - Part 5: African swine fever free zone 无规定动物疫病区标准 第5部分:无非洲猪瘟区 |
China National Standards di |
English PDF |
GB/T 22330.4-2008 |
Standard for specified animal disease free zone - Part 4: Classical swine fever free zone 无规定动物疫病区标准 第4部分:无古典猪瘟(猪瘟)区 |
China National Standards di |
English PDF |
GB/T 22330.3-2008 |
Standard for specified animal disease free zone - Part 3 : Swine vesicular disease free zone 无规定动物疫病区标准 第3部分:无猪水泡病区 |
China National Standards di |
English PDF |
GB/T 22330.2-2008 |
Standard for specifed animal disease free zone - Part 2: Foot and mouth disease free zone 无规定动物疫病区标准 第2部分:无口蹄疫区 |
China National Standards di |
English PDF |
GB/T 22330.14-2008 |
Standard for specified animal disease free zone - Part 14: Newcastle disease free zone 无规定动物疫病区标准 第14部分:无新城疫区 |
China National Standards di |
English PDF |
GB/T 22330.13-2008 |
Standard for specified animal disease free zone - Part 13: Highly pathogenic avian influenza free zone 无规定动物疫病区标准 第13部分:无高致病性禽流感区 |
China National Standards di |
English PDF |
GB/T 22330.12-2008 |
Standard for specified animal disease free zone - Part 12: Sheep pox and goat pox free zone 无规定动物疫病区标准 第12部分:无绵羊痘和山羊痘(羊痘)区 |
China National Standards di |
English PDF |
GB/T 22330.1-2008 |
Standard for specified animal disease free zone - Part 1: General stipulation 无规定动物疫病区标准 第1部分:通则 |
China National Standards di |
English PDF |
GB/T 22330.11-2008 |
Standard for specified animal disease free zone - Part 11: Peste des petits ruminants free zone 无规定动物疫病区标准 第11部分:无小反刍兽疫区 |
China National Standards di |
English PDF |
GB/T 22329-2008 |
diagnostic techniques for bovine hypodermosis 牛皮蝇蛆病诊断技术 |
China National Standards di |
English PDF |
GB/T 22310-2008 |
Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads-test procedure 道路车辆 制动衬片 盘式制动衬块受热膨胀量试验方法 |
China National Standards di |
English PDF |
GB/T 22309-2008 |
Road vehicles - Brake linings - Shear test procedure for disc beake pad and drum brake shoe assemblies 道路车辆 制动衬片 盘式制动块总成和鼓式制动蹄总成剪切强度试验方法 |
China National Standards di |
English PDF |
GB/T 16255.3-2008 |
Test method for the percentage of length of scoured mohair - Array diagram method 洗净马海毛纤维长度试验方法 手排法 |
China National Standards di |
English PDF |
GB/T 8806-2008 |
Plastics piping systems - Plastics components - Determination of dimensions 塑料管道系统 塑料部件尺寸的测定 |
China National Standards di |
English PDF |
GB/T 457-2008 |
Paper and board - Determination of folding endurance 纸和纸板耐折度的测定 |
China National Standards di |
English PDF |
GB/T 450-2008 |
Paper and board-Sampling for testing and identification of machine and cross direction, wire side and felt side 纸和纸板试样的采取及试样纵横向、正反面的测定 |
China National Standards di |
English PDF |
GB/T 4217-2008 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures 流体输送用热塑性塑料管材 公称外径和公称压力 |
China National Standards di |
English PDF |
GB/T 22364-2008 |
Paper and board - Determination of resistance to bending 纸和纸板弯曲挺度的测定 |
China National Standards di |
English PDF |
GB/T 18781-2008 |
Cultured pearl grading 珍珠分级 |
China National Standards di |
English PDF |
GB/T 1545-2008 |
Paper, board and pulp - Determination of acidity or alkalinity 纸、纸板和纸浆 水抽提液酸度或碱度的测定 |
China National Standards di |
English PDF |
GB/T 14531-2008 |
Office furniture - Tables、chairs and stools for reading 办公家具 阅览桌、椅、凳 |
China National Standards di |
English PDF |
GB/T 12660-2008 |
Pulps - Determination of drainability -“Canadian Standard”freeness method 纸浆 滤水性能的测定 “加拿大标准”游离度法 |
China National Standards di |
English PDF |
GB/T 12658-2008 |
Paper, board and pulp - Determination of sodium content 纸、纸板和纸浆中钠含量的测定 |
China National Standards di |
English PDF |
GB/T 7731.9-2008 |
Ferrotungsten - Determination of bismuth content - The bismuth iodide photometric method and inductively coupled plasma - atomic emission spectrometry 钨铁 铋含量的测定 碘化铋光度法和电感耦合等离子体原子发射光谱法 |
China National Standards di |
English PDF |
GB/T 17101-2008 |
Hot-dip galvanized steel wires for bridge cables 桥梁缆索用热镀锌钢丝 |
China National Standards di |
English PDF |
GB/T 12347-2008 |
Steel wire ropes - Bending fatigue testing 钢丝绳弯曲疲劳试验方法 |
China National Standards di |
English PDF |
GB/T 9091-2008 |
Inductive voltage dividers 感应分压器 |
China National Standards di |
English PDF |
GB/T 13978-2008 |
digital multimeters 数字多用表 |
China National Standards di |
English PDF |
GB/T 13970-2008 |
Basic parameter terms of digital instruments 数字仪表基本参数术语 |
China National Standards di |
English PDF |
GB/T 17179.1-2008 |
Information technology - Protocol for providing - The connectionless-mode network service - Part 1:Protocol specification 信息技术 提供无连接方式网络服务的协议 第1部分:协议规范 |
China National Standards di |
English PDF |
GB/T 12405-2008 |
Coding for kind of increase or decrease number of workers in an organization 单位增员减员代码 |
China National Standards di |
English PDF |
GB/T 1632.5-2008 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第5部分:热塑性均聚和共聚型聚酯(TP) |
China National Standards di |
English PDF |
GB/T 14486-2008 |
dimensional tolerances for moulded plastic parts 塑料模塑件尺寸公差 |
China National Standards di |
English PDF |
GB/T 19267.6-2008 |
Physical and chemical examination of trace evidence in forensic sciences - Part 6:Scanning electron microscope/ X ray energy dispersive spectrometry 刑事技术微量物证的理化检验 第6部分:扫描电子显微镜/X射线能谱法 |
China National Standards di |
English PDF |
GB 50444-2008 |
Code for acceptance and inspection of extinguisher distribution in buildings 建筑灭火器配置验收及检查规范 |
China National Standards di |
English PDF |
GB 22285-2008 |
Duroc breeding pig 杜洛克猪种猪 |
China National Standards di |
English PDF |
GB 22284-2008 |
Large yorkshire breeding pigs 大约克夏猪种猪 |
China National Standards di |
English PDF |
GB 22283-2008 |
Landrace breeding pig 长白猪种猪 |
China National Standards di |
English PDF |
GB/T 9095-2008 |
Sintered ferrous materials,carburized or carbonitrided - Determination and verification of case-harding depth 烧结铁基材料渗碳或碳氮共渗层深度的测定及其验证 |
China National Standards di |
English PDF |
GB/T 7184-2008 |
Small and medium power diesel engines - Measurement and evaluation of vibration 中小功率柴油机 振动测量及评级 |
China National Standards di |
English PDF |
GB/T 6804-2008 |
Sintered mital bushes - Determination of radial crushing strength 烧结金属衬套 径向压溃强度的测定 |
China National Standards di |
English PDF |
GB/T 5900.1-2008 |
Machine tools - Connecting dimensions of spindle noses and workholding chucks - Part 1: Conical connection 机床 主轴端部与卡盘连接尺寸 第1部分:圆锥连接 |
China National Standards di |
English PDF |
GB/T 5289.1-2008 |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1: Machines with fixed column and movable table 卧式铣镗床精度检验条件 第1部分:固定立柱和移动式工作台机床 |
China National Standards di |
English PDF |
GB/T 15376-2008 |
Wookworking machines - Turning lathes - Nomenclature and acceptance conditions 木工机床 普通车床 术语和精度 |
China National Standards di |
English PDF |
GB/T 14303-2008 |
Wookworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions 木工机床 单锯片圆锯机 术语和精度 |
China National Standards di |
English PDF |
GB/T 13572-2008 |
Wookworking machines - Planing machines for two-,three,or four-side dressing - Nomenclature and accetpance conditions 木工机床 二、三、四面刨床 术语和精度 |
China National Standards di |
English PDF |
GB/T 10430-2008 |
Inspection method for bonding ability of sintered friction elements 烧结金属摩擦片粘结性能检验方法 |
China National Standards di |
English PDF |
GB/T 16257-2008 |
Textile fibres - Test method for length and length distribution of staple fibres - Measurement of single fibres 纺织纤维 短纤维长度和长度分布的测定 单纤维测量法 |
China National Standards di |
English PDF |
GB/T 12533-2008 |
Determination of extraneous matter in edible mushroom 食用菌杂质测定 |
China National Standards di |
English PDF |
GB/T 12532-2008 |
Determination of total ash content in edible mushroom 食用菌灰分测定 |
China National Standards di |
English PDF |
GB 9254-2008 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement 信息技术设备的无线电骚扰限值和测量方法 |
China National Standards di |
English PDF |
GB/T 8427-2008 |
Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test 纺织品 色牢度试验 耐人造光色牢度:氙弧 |
China National Standards di |
English PDF |
GB/T 3927-2008 |
direct-current potentiometers 直流电位差计 |
China National Standards di |
English PDF |
GB/T 22265-2008 |
direct acting indicating analogue max-demand ammeters 直接作用模拟指示最大需量电流表 |
China National Standards di |
English PDF |
GB/T 22264.1-2008 |
Mounted digital display electric measuring instruments - Part1: Definitions and general requirements common to all parts 安装式数字显示电测量仪表 第1部分:定义和通用要求 |
China National Standards di |
English PDF |
GB/T 16656.21-2008 |
Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structrue 工业自动化系统与集成-产品数据的表达与交换 第21部分: 实现方法: 交换文件结构的纯正文编码 |
China National Standards di |
English PDF |
GB/T 14913-2008 |
digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors 直流数字电压表及直流模数转换器 |
China National Standards di |
English PDF |
GB/T 14733.9-2008 |
Terminology for telecommunication - Radio wave propagation 电信术语 无线电波传播 |
China National Standards di |
English PDF |
GB/T 7497.3-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors 微处理器系统总线 8位及16位数据(MULTIBUS I) 第3部分:对带有插针与插座连接器(间接配合)的欧洲板配置的机械与插针的描述 |
China National Standards di |
English PDF |
GB/T 7497.2-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors(direct) 微处理器系统总线 8位及16位数据(MULTIBUS I) 第2部分:对带有边缘连接器(直接配合)的系统总线配置的机械与引脚的描述 |
China National Standards di |
English PDF |
GB/T 22318.2-2008 |
Surface acoustic wave(SAW)resonators - Part 1-2: Test conditions 声表面波谐振器 第1-2部分:试验条件 |
China National Standards di |
English PDF |
GB/T 16264.7-2008 |
Information technology - Open systems interconnection - The directory - Part 7: Selected object classes 信息技术 开放系统互连 目录 第7部分: 选定的客体类 |
China National Standards di |
English PDF |
GB/T 16264.6-2008 |
Information technology - Open systems interconnection - The directory - Part 6: Selected attribute types 信息技术 开放系统互连 目录 第6部分: 选定的属性类型 |
China National Standards di |
English PDF |
GB/T 16264.5-2008 |
Information technology - Open systems interconnection - The directory - Part 5: Protocol specifications 信息技术 开放系统互连 目录 第5部分: 协议规范 |
China National Standards di |
English PDF |
GB/T 16264.4-2008 |
Information technology - Open systems interconnection - The directory - Part 4: Procedures for distributed operation 信息技术 开放系统互连 目录 第4部分: 分布式操作规程 |
China National Standards di |
English PDF |
GB/T 16264.3-2008 |
Information technology - Open systems interconnection - The directory - Part 3: Abstract service definition 信息技术 开放系统互连 目录 第3部分: 抽象服务定义 |
China National Standards di |
English PDF |
GB/T 16264.2-2008 |
Information technology - Open systems interconnection - The directory - Part 2: Models 信息技术 开放系统互连 目录 第2部分: 模型 |
China National Standards di |
English PDF |
GB/T 16264.1-2008 |
Information technology - Open systems interconnection - The directory - Part 1: Overview of concepts, models and services 信息技术 开放系统互连 目录 第1部分: 概念、模型和服务的概述 |
China National Standards di |
English PDF |
GB/T 908-2008 |
Forged bars - dimensions, shape, weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards di |
English PDF |
GB/T 702-2008 |
Hot-rolled steel bars - dimensions,shape,weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards di |
English PDF |
GB/T 6726-2008 |
Cold forming sectional steel for vehicles - dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards di |
English PDF |
GB/T 6723-2008 |
Cold forming sectional steel - Open sectional steel for general structure - dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards di |
English PDF |
GB/T 4337-2008 |
Metallic materials - Fatigue testing - Rotating bar bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards di |
English PDF |
GB/T 13304.2-2008 |
Steels classification - Part 2: Classification of according to main quality classes and main property or application characteristics 钢分类 第2部分:按主要质量等级和主要性能或使用特性的分类 |
China National Standards di |
English PDF |
GB/T 13304.1-2008 |
Steels classification - Part 1: Classification of according to chemical composition 钢分类 第1部分:按化学成分分类 |
China National Standards di |
English PDF |
GB/T 8885-2008 |
Edible corn starch 食用玉米淀粉 |
China National Standards di |
English PDF |
GB/T 9352-2008 |
Plastic - Compression moulding of test specimens of thermoplastic materials 塑料 热塑性塑料材料试样的压塑 |
China National Standards di |
English PDF |
GB/T 8324-2008 |
Plastics - Determination of bulk factor of moulding materials 塑料 模塑材料体积系数的测定 |
China National Standards di |
English PDF |
GB/T 5471-2008 |
Plastics - Compression moulding of test specimens of thermosetting materials 塑料 热固性塑料试样的压塑 |
China National Standards di |
English PDF |
GB/T 4616-2008 |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter(apparent resin content of material in the unmoulded state) 塑料 酚醛模塑料 丙酮可溶物(未模塑态材料的表观树脂含量)测定 |
China National Standards di |
English PDF |
GB/T 3403.1-2008 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF-and UF/MF-PMCs)- Part 1: Designation system and basis for specifications 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料(UF-和UF/MF-PMCs) 第1部分: 命名系统和分类基础 |
China National Standards di |
English PDF |
GB/T 22276-2008 |
Advisory document for good laboratory practice - Requesting and carrying out inspections and study audits in another country 良好实验室规范建议性文件 在另一国家中要求和执行检查与研究审核 |
China National Standards di |
English PDF |
GB/T 22275.7-2008 |
Requirements of conduct for good laboratory practice - Part 7: The application of the GLP principles to the organisation and management of multi-site studies 良好实验室规范实施要求 第7部分:良好实验室规范原则在多场所研究的组织和管理中的应用 |
China National Standards di |
English PDF |
GB/T 22275.5-2008 |
Requirements of conduct for good laboratory practice - Part 5: The application of the GLP principles to short term studies 良好实验室规范实施要求 第5部分:良好实验室规范原则在短期研究中的应用 |
China National Standards di |
English PDF |
GB/T 22275.4-2008 |
Requirements of conduct for good laboratory practice - Part 4: The application of the GLP principles to field studies 良好实验室规范实施要求 第4部分:良好实验室规范原则在现场研究中的应用 |
China National Standards di |
English PDF |
GB/T 22275.2-2008 |
Requirements of conduct for good laboratory practice - Part 2: The role and responsibilities of the study director in GLP studies 良好实验室规范实施要求 第2部分:良好实验室规范研究中项目负责人的任务和职责 |
China National Standards di |
English PDF |
GB/T 22274.2-2008 |
Guidance for GLP monitoring authorities - Part 2: Guidance for the conduct of laboratory inspections and study audits 良好实验室规范监督部门指南 第2部分:执行实验室检查和研究审核的指南 |
China National Standards di |
English PDF |
GB/T 22273-2008 |
Advisory document for good laboratory practice:The application of the principles of GLP to in vitro studies 良好实验室规范建议性文件 良好实验室规范原则在体外研究中的应用 |
China National Standards di |
English PDF |
GB/T 22271.2-2008 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛(POM)模塑和挤塑材料 第2部分:试样制备和性能测定 |
China National Standards di |
English PDF |
GB/T 22271.1-2008 |
Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 聚甲醛(POM)模塑和挤塑材料 第1部分:命名系统和分类基础 |
China National Standards di |
English PDF |
GB/T 1632.1-2008 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part1:General principles 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第1部分:通则 |
China National Standards di |
English PDF |
GB/T 1404.2-2008 |
Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 |
China National Standards di |
English PDF |
GB/T 1404.1-2008 |
Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范 |
China National Standards di |
English PDF |
Find out:13477Items | To Page of: First -Previous-Next -Last | [88] [89] [90] [91] [92] [93] [94] |