GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 43627-2023 |
Double-ended LED lamps (for replacement of straight tube fluorescent lamps) Safety regulations 双端LED灯(替换直管形荧光灯用) 安全规范 |
China National Standards end |
English PDF |
GB/T 43333-2023 |
Standards for debugging and acceptance of independent microgrids 独立型微电网调试与验收规范 |
China National Standards end |
English PDF |
GB/T 32151.13-2023 |
Carbon Emissions Accounting and Reporting Requirements Part 13: Independent Coking Enterprises 碳排放核算与报告要求 第13部分:独立焦化企业 |
China National Standards end |
English PDF |
GB/T 23144-2023 |
Paper and paperboard Determination of bending stiffness General principles of the two-point, three-point and four-point methods 纸和纸板 弯曲挺度的测定 两点法、三点法和四点法的通用原理 |
China National Standards end |
English PDF |
GB/T 18774-2023 |
Double-ended Fluorescent Lamps Safety Specifications 双端荧光灯 安全规范 |
China National Standards end |
English PDF |
GB/T 16843-2023 |
Single-ended fluorescent lamps safety regulations 单端荧光灯 安全规范 |
China National Standards end |
English PDF |
GB/T 43334-2023 |
Technical requirements for independent microgrid energy management systems 独立型微电网能量管理系统技术要求 |
China National Standards end |
English PDF |
GB/T 43354-2023 |
Plane bending fatigue test method for copper alloy elastic strips 铜合金弹性带材平面弯曲疲劳试验方法 |
China National Standards end |
English PDF |
GB/T 43296-2023 |
Test method for room temperature bending fatigue properties of fine ceramics 精细陶瓷室温弯曲疲劳性能试验方法 |
China National Standards end |
English PDF |
GB/T 43386-2023 |
Personal hygiene aids intended to support the user Requirements and test methods 用于支撑使用者的个人卫生辅助器具 要求和试验方法 |
China National Standards end |
English PDF |
GB/Z 41082.2-2023 |
Wheelchairs Part 2: Typical values and recommended limit values of dimensions, mass and operating space measured according to GB/Z 18029.5 轮椅车 第2部分:按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值 |
China National Standards end |
English PDF |
GB/T 22176-2023 |
Pendimethalin EC 二甲戊灵乳油 |
China National Standards end |
English PDF |
GB/T 43412-2023 |
Recommended process specifications for resistance spot welding of metal sheets 金属薄板电阻点焊推荐工艺规范 |
China National Standards end |
English PDF |
GB/T 43321-2023 |
Recommended process specifications for brazing copper and copper alloys 铜及铜合金钎焊推荐工艺规范 |
China National Standards end |
English PDF |
GB/T 40681.2-2023 |
Statistical methods for monitoring production process capability and performance Part 2: Process capability and performance for time-dependent process models 生产过程能力和性能监测统计方法 第2部分:时间相依过程模型的过程能力与性能 |
China National Standards end |
English PDF |
GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards end |
English PDF |
GB 15193.29-2020 |
National Food Safety Standards Extended Generation Reproductive Toxicity Test 食品安全国家标准 扩展一代生殖毒性试验 |
China National Standards end |
English PDF |
GB/T 5334-2021 |
Passenger car wheel bending and radial fatigue performance requirements and test methods "Modification No. 1" 乘用车 车轮 弯曲和径向疲劳性能要求及试验方法《第1号修改单》 |
China National Standards end |
English PDF |
GB/Z 43078-2023 |
Hydraulic Transmission Connections Installation Instructions for Stud-end Adjustable Pipe Couplings 液压传动连接 螺柱端可调管接头的安装指导 |
China National Standards end |
English PDF |
GB/Z 43065.1-2023 |
Robots Safety design of industrial robot systems Part 1: end effectors 机器人 工业机器人系统的安全设计 第1部分:末端执行器 |
China National Standards end |
English PDF |
GB/Z 43036-2023 |
Rotating electrical machines - Measurement of end vibration of stator formed windings 旋转电机 定子成型绕组端部振动的测量 |
China National Standards end |
English PDF |
GB/T 43116-2023 |
Fiber Reinforced Plastic Composites Composite Standard Certification Scheme including Reduced and Extended Certification 纤维增强塑料复合材料 包括缩减和扩展认证的复合材料标准认证方案 |
China National Standards end |
English PDF |
GB/T 43077.4-2023 |
Hydraulic Transmission Connections Plain Threaded Flat Ports and Stud ends Part 4: Hexagonal Screw Plug 液压传动连接 普通螺纹平油口和螺柱端 第4部分:六角螺塞 |
China National Standards end |
English PDF |
GB/T 23708.2-2023 |
Geographic information Geographic Markup Language (GML) Part 2: Extended schemas and encoding rules 地理信息 地理标记语言(GML)第2部分:扩展模式及编码规则 |
China National Standards end |
English PDF |
GB/T 22319.6-2023 |
Measurement of parameters of quartz crystal components Part 6: Measurement of excitation level dependence (DLD) 石英晶体元件参数的测量 第6部分:激励电平相关性(DLD)的测量 |
China National Standards end |
English PDF |
GB/T 42895-2023 |
Microelectromechanical systems (MEMS) technology Silicon-based MEMS microstructure bending strength test method 微机电系统(MEMS)技术 硅基MEMS微结构弯曲强度试验方法 |
China National Standards end |
English PDF |
GB/T 42667-2023 |
Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards end |
English PDF |
GB/T 15092.4-2023 |
Appliance switches Part 2-4: Special requirements for independently installed switches 器具开关 第2-4部分:独立安装开关的特殊要求 |
China National Standards end |
English PDF |
GB/T 33061.5-2023 |
Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method 塑料 动态力学性能的测定 第5部分:非共振弯曲振动法 |
China National Standards end |
English PDF |
GB 18671-2009 |
Disposable intravenous infusion needle "No. 1 Amendment" 一次性使用静脉输液针《第1号修改单》 |
China National Standards end |
English PDF |
GB 13094-2017 |
Passenger Car Structural Safety Requirements "No. 1 Amendment" 客车结构安全要求《第1号修改单》 |
China National Standards end |
English PDF |
GB 15741-1995 |
Vehicle and Trailer License Plate (Frame) and its Position "No. 1 Amendment" 汽车和挂车号牌板(架)及其位置《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 2283-2019 |
Coking benzene "Amendment No. 1" 焦化苯《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 7704-2017 |
Non-destructive testing X-ray stress measurement method "No. 1 Amendment" 无损检测 X射线应力测定方法《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 30195-2023 |
Test method for impact resistance of passenger car tires - pendulum method 轿车轮胎耐撞击性能试验方法 摆锤法 |
China National Standards end |
English PDF |
GB/T 39139.2-2023 |
Shale gas—Environmental protection—Part 2: Recommended practices for environmental protection in production operations 页岩气 环境保护 第2部分:生产作业环境保护推荐作法 |
China National Standards end |
English PDF |
GB/T 39248-2020 |
Specification for thermoplastic multi-layer (non-vulcanized) hose and hose assemblies for conveying liquefied petroleum gas and liquefied natural gas "No. 1 Amendment" 输送液化石油气和液化天然气用热塑性塑料多层(非硫化)软管及软管组合件 规范《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 21017-2021 |
Technical Specification for Corn Drying "No. 1 Amendment" 玉米干燥技术规范《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 3883.201-2017 |
Safety of Handheld, Portable Power Tools and Garden Tools Part 2: Particular Requirements for Electric Drills and Impact Drills "Amendment No. 1" 手持式、可移式电动工具和园林工具的安全 第2部分:电钻和冲击电钻的专用要求《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 1536-2021 |
Rapeseed Oil "Amendment No. 1" 菜籽油《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 42484-2023 |
Huoshan Dendrobium artificial cultivation technical regulations 霍山石斛人工栽培技术规程 |
China National Standards end |
English PDF |
GB/T 17902.1-2023 |
Information technology - Security techniques - Digital signatures with appendices - Part 1: Overview 信息技术 安全技术 带附录的数字签名 第1部分:概述 |
China National Standards end |
English PDF |
GB/T 42472-2023 |
Critical current measurement Retained critical current of silver-coated Bi-2223 superconducting wire after double bending at room temperature 临界电流测量 银包套Bi-2223超导线室温双弯曲后的保留临界电流 |
China National Standards end |
English PDF |
GB/T 42471-2023 |
Nanotechnology - Bending test method for flexible nano energy storage devices 纳米技术 柔性纳米储能器件弯曲测试方法 |
China National Standards end |
English PDF |
GB 6675.11-2014 |
Toy Safety Part 11: Household Swings, Slides and Similar Indoor and Outdoor Activity Toys "No. 1 Amendment" 玩具安全 第11部分:家用秋千、滑梯及类似用途室内、室外活动玩具《第1号修改单》 |
China National Standards end |
English PDF |
GB 19865-2005 |
Safety of Electric Toys "Amendment No. 1" 电玩具的安全《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 20822-2007 |
Solid-liquid method liquor "No. 1 Amendment" 固液法白酒《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 26173-2022 |
super calendered paper 超级压光纸 |
China National Standards end |
English PDF |
GB/T 5900.3-2022 |
Machine tools - Dimensions of spindle end and chuck connection - Part 3: Bayonet type 机床 主轴端部与卡盘连接尺寸 第3部分:卡口型 |
China National Standards end |
English PDF |
GB/T 5900.2-2022 |
Machine tools - Dimensions of spindle end and chuck connection - Part 2: Cam-lock type 机床 主轴端部与卡盘连接尺寸 第2部分:凸轮锁紧型 |
China National Standards end |
English PDF |
GB/T 5900.4-2022 |
Machine tools - Dimensions of spindle end and chuck connections - Part 4: Cylindrical connections 机床 主轴端部与卡盘连接尺寸 第4部分:圆柱连接 |
China National Standards end |
English PDF |
GB/T 41564-2022 |
Textiles - Quantitative chemical analysis - Blends of aramid fibers with certain other fibers 纺织品 定量化学分析 芳香族聚酰胺纤维与某些其他纤维的混合物 |
China National Standards end |
English PDF |
GB/T 41588.3-2022 |
Road vehicles - Controller area network (CAN) - Part 3: Low-speed fault-tolerant, media-dependent interfaces 道路车辆 控制器局域网(CAN) 第3部分:低速容错、媒介相关接口 |
China National Standards end |
English PDF |
GB/T 23242-2022 |
Food processing equipment Electric equipment Food choppers and blenders 饮食加工设备 电动设备 食物切碎机和搅拌机 |
China National Standards end |
English PDF |
GB/T 34722-2017 |
Impregnated film paper veneer plywood and blockboard "No. 1 Amendment" 浸渍胶膜纸饰面胶合板和细木工板《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 11417.7-2012 |
Ophthalmic optics - Contact lenses - Part 7: Test methods for physical and chemical properties "No. 1 Amendment" 眼科光学 接触镜 第7部分: 理化性能试验方法《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 11417.5-2012 |
Ophthalmic optics - Contact lenses - Part 5: Test methods for optical properties "No. 1 Amendment" 眼科光学 接触镜 第5部分: 光学性能试验方法《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 18997.2-2020 |
Aluminum plastic composite pressure pipe part 2: aluminum pipe butt welded aluminum plastic pipe No. 1 amendment 铝塑复合压力管 第2部分:铝管对接焊式铝塑管《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 18997.1-2020 |
Aluminum plastic composite pressure pipes - Part 1: lap welded aluminum plastic pipes for aluminum pipes - amendment No. 1 铝塑复合压力管 第1部分:铝管搭接焊式铝塑管《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 41475-2022 |
1: Specification for color and legend of 25000 ~ 1:500000 soil nutrient map 1:25 000~1:500 000土壤养分图用色与图例规范 |
China National Standards end |
English PDF |
GB/T 3795-2014 |
Ferromanganese "Amendment No. 1" 锰铁《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 19836-2019 |
Electric vehicle instrument "No. 1 Amendment" 电动汽车仪表《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 29461-2012 |
No. 1 Amendment List for Ultrasonic Testing of Polyethylene Pipeline Electrofusion Joints 聚乙烯管道电熔接头超声检测《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 23529-2009 |
Trehalose "Amendment No. 2" 海藻糖《第2号修改单》 |
China National Standards end |
English PDF |
GB/T 41354-2022 |
Hydraulic Transmission Seamless or Welded Plain end Precision Steel Tube Dimensions and Nominal Pressures 液压传动 无缝或焊接型的平端精密钢管 尺寸与公称压力 |
China National Standards end |
English PDF |
GB/T 41274-2022 |
Programmable Control System endogenous Safety Architecture 可编程控制系统内生安全体系架构 |
China National Standards end |
English PDF |
GB/T 41309-2022 |
Nanotechnology, endotoxin in vitro testing of nanomaterials, Limulus reagent method 纳米技术 纳米材料的内毒素体外测试 鲎试剂法 |
China National Standards end |
English PDF |
GB/T 41264-2022 |
Sheet metal bending robot safety requirements 板料折弯机器人 安全要求 |
China National Standards end |
English PDF |
GB/T 17799.7-2022 |
Electromagnetic compatibility - Generic standards - Part 7: Immunity requirements for equipment intended to perform safety-related system functions (functional safety) in industrial locations 电磁兼容 通用标准 第7部分:工业场所中用于执行安全相关系统功能(功能安全)设备的抗扰度要求 |
China National Standards end |
English PDF |
GB/T 30918-2022 |
Evaluation method of non-oil-extended solution polymerized isoprene rubber (IR) 非充油溶液聚合型异戊二烯橡胶(IR) 评价方法 |
China National Standards end |
English PDF |
GB/T 34590.7-2022 |
Road vehicles - Functional safety - Part 7: Production, operation, service and end-of-life 道路车辆 功能安全 第7部分:生产、运行、服务和报废 |
China National Standards end |
English PDF |
GB/T 37036.8-2022 |
Information technology - Biometrics for mobile devices - Part 8: Detection of rendering attacks 信息技术 移动设备生物特征识别 第8部分:呈现攻击检测 |
China National Standards end |
English PDF |
GB/T 11546.2-2022 |
Plastics - Determination of creep properties - Part 2: Three-point bending creep 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 |
China National Standards end |
English PDF |
GB/T 12337-2014 |
Steel Spherical Storage Tank "No. 1 Amendment" 钢制球形储罐《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 35031.4-2022 |
User end energy management system Part 4: Information exchange specification between master station and gateway 用户端能源管理系统 第4部分:主站与网关信息交互规范 |
China National Standards end |
English PDF |
GB/T 41799-2022 |
Restriction endonuclease impurity detection method 限制性核酸内切酶杂质检测方法 |
China National Standards end |
English PDF |
GB/T 9771.7-2022 |
Single-mode optical fibers for telecommunication - Part 7: Characteristics of bend loss insensitive single-mode optical fibers 通信用单模光纤 第7部分:弯曲损耗不敏感单模光纤特性 |
China National Standards end |
English PDF |
GB/T 35031.302-2022 |
User end energy management system Part 3-2: Subsystem interface gateway data configuration 用户端能源管理系统 第3-2部分:子系统接口网关数据配置 |
China National Standards end |
English PDF |
GB/T 18268.32-2022 |
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 32: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) - Indu 测量、控制和实验室用的电设备 电磁兼容性要求 第32部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 特定电磁环境的工业应用 |
China National Standards end |
English PDF |
GB/T 18268.31-2022 |
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 31: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) Genera 测量、控制和实验室用的电设备 电磁兼容性要求 第31部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 一般工业应用 |
China National Standards end |
English PDF |
GB/T 15762-2020 |
Autoclaved aerated concrete slab "No. 1 Amendment" 蒸压加气混凝土板《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 36731-2018 |
Temporary construction of the stage and stands of the performance venue safety "No. 1 Amendment" 临时搭建演出场所舞台、看台安全《第1号修改单》 |
China National Standards end |
English PDF |
GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分:弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards end |
English PDF |
GB/T 36148.3-2022 |
Ships and offshore technology - Protection of the offshore environment - Oil booms - Part 3: end connectors 船舶与海上技术 海上环境保护 围油栏 第3部分:端部连接器 |
China National Standards end |
English PDF |
GB/T 41856.2-2022 |
Non-destructive testing - Visual inspection of industrial endoscopes - Part 2: Atlas 无损检测 工业内窥镜目视检测 第2部分:图谱 |
China National Standards end |
English PDF |
GB/T 41856.1-2022 |
Non-destructive testing - Visual inspection of industrial endoscopes - Part 1: Methods 无损检测 工业内窥镜目视检测 第1部分:方法 |
China National Standards end |
English PDF |
GB/T 41852-2022 |
Semiconductor devices; microelectromechanical devices; bending and shearing test methods for bonding strength of MEMS structures 半导体器件 微机电器件 MEMS结构黏结强度的弯曲和剪切试验方法 |
China National Standards end |
English PDF |
GB/T 40531.1-2021 |
Ships and marine technology—Specifications for gas detectors intended for use on board ships—Part 1:Portable gas detectors for atmosphere testing of enclosed spaces 船舶与海上技术 船用气体探测器规范 第1部分:围蔽处所的便携式气体探测器 |
China National Standards end |
English PDF |
GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards end |
English PDF |
GB/T 29168.1-2021 |
Petroleum and natural gas industries—Induction bends, fittings and flanges for pipeline transportation systems—Part 1: Induction bends 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第1部分:感应加热弯管 |
China National Standards end |
English PDF |
GB/T 15970.10-2021 |
Corrosion of metals and alloys—Stress corrosion testing—Part l0: Reverse U-bend method 金属和合金的腐蚀 应力腐蚀试验 第10部分:反向U型弯曲试验方法 |
China National Standards end |
English PDF |
GB/T 5211.14-2021 |
General methods of test for pigments and extenders—Part 14: Determination of residue on sieve—Mechanical flushing procedure 颜料和体质颜料通用试验方法 第14部分:筛余物的测定 机械冲洗法 |
China National Standards end |
English PDF |
GB/T 40488-2021 |
Code of practice on propagation of toxicodendron verniciflu 漆树育苗技术规程 |
China National Standards end |
English PDF |
GB/T 40173-2021 |
Determination of reducing-end sugar in water-soluble chitosan—Spectrophotometric method 水溶性壳聚糖中还原性端基糖的测定 分光光度法 |
China National Standards end |
English PDF |
GB/T 15972.47-2021 |
Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss 光纤试验方法规范 第47部分:传输特性的测量方法和试验程序 宏弯损耗 |
China National Standards end |
English PDF |
GB/T 14230-2021 |
Test method of tooth bending strength for gear load capacity 齿轮弯曲疲劳强度试验方法 |
China National Standards end |
English PDF |
GB/T 3480.3-2021 |
Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength 直齿轮和斜齿轮承载能力计算 第3部分:轮齿弯曲强度计算 |
China National Standards end |
English PDF |
GB/T 39826-2021 |
Fine ceramics—Determining flexural bond strength—Four-point bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards end |
English PDF |
GB/T 39806-2021 |
Safety performance evaluation of suspended floor,stairs, trail and plank road glass 悬空地板、踏步、步道及栈道玻璃安全性能评价 |
China National Standards end |
English PDF |
GB/T 39961-2021 |
Ball screw assembly -- Dimension of shaft-end type screw 滚珠丝杠副 支承结构型式尺寸 |
China National Standards end |
English PDF |
Find out:748Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |