GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 27068-2006 |
Arrangements for the recogonition and acceptance of conformity assessment results 合格评定结果的承认和接受协议 |
China National Standards fo |
English PDF |
GB/T 27060-2006 |
conformity assessment - Code of good practice 合格评定 良好操作规范 |
China National Standards fo |
English PDF |
GB/T 20704-2006 |
Rock drilling - Rotary drill-rods and rotary drill-bits for dry drilling - Connecting dimensions 岩石钻孔 干式钻杆和钻头 连接尺寸 |
China National Standards fo |
English PDF |
GB/T 20702-2006 |
Test method for extinguishing property of gaseous extinguishing agent 气体灭火剂灭火性能测试方法 |
China National Standards fo |
English PDF |
GB/T 18294.3-2006 |
Technical identification method for fire - Part 3:Gas chromatography analysis 火灾技术鉴定方法 第3部分:气相色谱法 |
China National Standards fo |
English PDF |
GB/T 20803-2006 |
Universal technical criterions for proportion system in feed mill 饲料配料系统通用技术规范 |
China National Standards fo |
English PDF |
GB/T 16764-2006 |
Hygienic specification for formula feed enterprises 配合饲料企业卫生规范 |
China National Standards fo |
English PDF |
GB/T 5169.21-2006 |
Fire hazard testing for electric and eletronic products - Part 21: Abnormal heat - Ball pressure test 电工电子产品着火危险试验 第21部分:非正常热 球压试验 |
China National Standards fo |
English PDF |
GB/T 5169.11-2006 |
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products 电工电子产品着火危险试验 第11部分:灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法 |
China National Standards fo |
English PDF |
GB/T 5169.10-2006 |
Fire hazard testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure 电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法 |
China National Standards fo |
English PDF |
GB/T 4797.4-2006 |
Environmental conditions appearing in nature for electric and electronic products - Solar radiation and temperature 电工电子产品 自然环境条件 太阳辐射与温度 |
China National Standards fo |
English PDF |
GB/T 2424.7-2006 |
Environmental tests for electric and electronic products - Measurements in temperature chambers for tests A and tests B (with load) 电工电子产品环境试验 试验A和B(带负载)用温度试验箱的测量 |
China National Standards fo |
English PDF |
GB/T 2424.6-2006 |
Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers 电工电子产品环境试验 温度/湿度试验箱性能确认 |
China National Standards fo |
English PDF |
GB/T 2424.5-2006 |
Environmental tests for electric and electronic products - Confirmation of the performance of temperature chambers 电工电子产品环境试验 温度试验箱性能确认 |
China National Standards fo |
English PDF |
GB/T 2423.37-2006 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test L:Dust and sand 电工电子产品环境试验 第2部分:试验方法 试验L:沙尘试验 |
China National Standards fo |
English PDF |
GB/T 2423.3-2006 |
Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat, Steady state 电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验 |
China National Standards fo |
English PDF |
GB/T 5053.3-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions,tests and requirements 道路车辆 牵引车与挂车之间电连接器 定义、试验方法和要求 |
China National Standards fo |
English PDF |
GB/T 5053.2-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage 道路车辆 牵引车与挂车之间电连接器 7芯12V标准型(12N) |
China National Standards fo |
English PDF |
GB/T 5053.1-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage 道路车辆 牵引车与挂车之间电连接器 7芯24V标准型(24N) |
China National Standards fo |
English PDF |
GB/T 20718-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connector for vehicles with 12V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 12V13芯型 |
China National Standards fo |
English PDF |
GB/T 20717-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 24V15芯型 |
China National Standards fo |
English PDF |
GB/T 20716.2-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gears of vehicles with 12V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 第2部分:12V标称电压车辆的制动系统和行走系的连接 |
China National Standards fo |
English PDF |
GB/T 20716.1-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gears of vehicles with 24V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 第1部分:24V标称电压车辆的制动系统和行走系的连接 |
China National Standards fo |
English PDF |
GB/T 5375-2006 |
Code of designation for motorcycles and mopeds 摩托车和轻便摩托车型号编制方法 |
China National Standards fo |
English PDF |
GB/T 5373-2006 |
Measuring method of dimensions and masses parameter for motorcycles and mopeds 摩托车和轻便摩托车尺寸和质量参数的测定方法 |
China National Standards fo |
English PDF |
GB/T 20662-2006 |
Petroleum and natural gas industries - Classification and conformity assessment of products processes and services 石油天然气工业 产品、过程和服务的分级与合格评定 |
China National Standards fo |
English PDF |
GB/T 20661-2006 |
Petroleum and natural gas industries - Flexible pipe systems for subsea and marine riser applications 石油和天然气工业 用于海底和海洋立管的挠性管系统 |
China National Standards fo |
English PDF |
GB/T 10478-2006 |
Railway tank car for liquefied gases 液化气体铁道罐车 |
China National Standards fo |
English PDF |
GB 15308-2006 |
foam extinguishing agent 泡沫灭火剂 |
China National Standards fo |
English PDF |
GB/T 5601-2006 |
Rules for inspecting and testing of failway freight car after completion of construction 铁道货车检查与试验规则 |
China National Standards fo |
English PDF |
GB/T 5600-2006 |
General technical specification for railway freight car 铁道货车通用技术条件 |
China National Standards fo |
English PDF |
GB/T 3317-2006 |
General technical specification for electric locomotive 电力机车通用技术条件 |
China National Standards fo |
English PDF |
GB/T 16904.2-2006 |
Checking of rolling stock clearance for standard gauge railways - Part 2:clearance treadle 标准轨距铁路机车车辆限界检查 第2部分:限界规 |
China National Standards fo |
English PDF |
GB/T 16904.1-2006 |
Checking of rolling stock clearance for standard gauge railways - Part 1:Methods for inspecting 标准轨距铁路机车车辆限界检查 第1部分:检查方法 |
China National Standards fo |
English PDF |
GB/T 15846-2006 |
The door gasket for freight container 集装箱门框密封条 |
China National Standards fo |
English PDF |
GB/T 12816-2006 |
The limiting value and measurement method for the interior noise in the railway passenger coach 铁道客车内部噪声限值及测量方法 |
China National Standards fo |
English PDF |
GB/T 20730.1-2006 |
Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance 工业过程控制系统用模拟输入两位或多位输出仪表 第1部分:性能评定方法 |
China National Standards fo |
English PDF |
GB/T 19903.10-2006 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 10: General process data 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第10部分:通用工艺数据 |
China National Standards fo |
English PDF |
GB/T 19902.3-2006 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 3: Interface services,protocols and capability templates 工业自动化系统与集成 制造软件互操作性能力建规 第3部分:接口服务、协议及能力模板 |
China National Standards fo |
English PDF |
GB/T 19659.4-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems 工业自动化系统与集成 开放系统应用集成框架 第4部分:基于以太网控制系统的参考描述 |
China National Standards fo |
English PDF |
GB/T 19659.3-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems 工业自动化系统与集成 开放系统应用集成框架 第3部分:基于IEC 61158控制系统的参考描述 |
China National Standards fo |
English PDF |
GB/T 19659.2-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems 工业自动化系统与集成 开放系统应用集成框架 第2部分:基于ISO 11898的控制系统的参考描述 |
China National Standards fo |
English PDF |
GB 20665-2006 |
Minimum allowable values of energy efficiency and energy efficiency grades for domestic gas instantaneous water heater and gas fired heating and hot water combi-boilers 家用燃气快速热水器和燃气采暖热水炉能效限定值及能效等级 |
China National Standards fo |
English PDF |
GB 50374-2006 |
Code of construction and acceptance for communication conduit engineering 通信管道工程施工及验收规范 |
China National Standards fo |
English PDF |
GB 50373-2006 |
Design code for communication conduit and passage engineering 通信管道与通道工程设计规范 |
China National Standards fo |
English PDF |
GB 50135-2006 |
Code for design of high-rising structures 高耸结构设计规范 |
China National Standards fo |
English PDF |
GB/T 20654-2006 |
Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials 防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法 |
China National Standards fo |
English PDF |
GB 20653-2006 |
High-visibility warning clothing for professional use 职业用高可视性警示服 |
China National Standards fo |
English PDF |
GB/T 4170-2006 |
Specification of components of injection moulds for plastics 塑料注射模零件技术条件 |
China National Standards fo |
English PDF |
GB/T 4169.9-2006 |
Components of injection moulds for plastics - Part 9: Stop pin 塑料注射模零件 第9部分:限位钉 |
China National Standards fo |
English PDF |
GB/T 4169.8-2006 |
Components of injection moulds for plastics ― Part 8:Mould plate 塑料注射模零件 第8部分:模板 |
China National Standards fo |
English PDF |
GB/T 4169.7-2006 |
Components of injection moulds for plastics - Part 7: Ejector plate 塑料注射模零件 第7部分:推板 |
China National Standards fo |
English PDF |
GB/T 4169.6-2006 |
Components of injection moulds for plastics - Part 6: Spacer block 塑料注射模零件 第6部分:垫块 |
China National Standards fo |
English PDF |
GB/T 4169.5-2006 |
Components of injection moulds for plastics - Part 5: Shouldered guide pillar 塑料注射模零件 第5部分:带肩导柱 |
China National Standards fo |
English PDF |
GB/T 4169.4-2006 |
Components of injection moulds for plastics - Part 4: Headed guide pillar 塑料注射模零件 第4部分:带头导柱 |
China National Standards fo |
English PDF |
GB/T 4169.3-2006 |
Components of injection moulds for plastics - Part 3: Headed guide bush 塑料注射模零件 第3部分:带头导套 |
China National Standards fo |
English PDF |
GB/T 4169.23-2006 |
Components of injection moulds for plastics - Part 23: Rectangular mould opening delayer 塑料注射模零件 第23部分:矩形拉模扣 |
China National Standards fo |
English PDF |
GB/T 4169.22-2006 |
Components of injection moulds for plastics - Part 22: Round mould opening delayer 塑料注射模零件 第22部分: 圆形拉模扣 |
China National Standards fo |
English PDF |
GB/T 4169.2-2006 |
Components of injection moulds for plastics - Part 2: Straight guide bush 塑料注射模零件 第2部分:直导套 |
China National Standards fo |
English PDF |
GB/T 4169.21-2006 |
Components of injection moulds for plastics - Part 21: Rectangular locating element 塑料注射模零件 第21部分:矩形定位元件 |
China National Standards fo |
English PDF |
GB/T 4169.20-2006 |
Components of injection moulds for plastics - Part 20: Limit pin 塑料注射模零件 第20部分:拉杆导柱 |
China National Standards fo |
English PDF |
GB/T 4169.19-2006 |
Components of injection moulds for plastics - Part 19: Sprue bush 塑料注射模零件 第19部分:浇口套 |
China National Standards fo |
English PDF |
GB/T 4169.18-2006 |
Components of injection moulds for plastics - Part 18: Locating ring 塑料注射模零件 第18部分:定位圈 |
China National Standards fo |
English PDF |
GB/T 4169.17-2006 |
Components of injection moulds for plastics - Part 17: Ejector sleeve 塑料注射模零件 第17部分:推管 |
China National Standards fo |
English PDF |
GB/T 4169.16-2006 |
Components of injection moulds for plastics - Part 16: Shouldered ejector pin 塑料注射模零件 第16部分: 带肩推杆 |
China National Standards fo |
English PDF |
GB/T 4169.15-2006 |
Components of injection moulds for plastics - Part 15: Flat ejector pin 塑料注射模零件 第15部分: 扁推杆 |
China National Standards fo |
English PDF |
GB/T 4169.14-2006 |
Components of injection moulds for plastics - Part 14: Ejector guide pillar 塑料注射模零件 第14部分:推板导柱 |
China National Standards fo |
English PDF |
GB/T 4169.13-2006 |
Components of injection moulds for plastics ― Part 13: Return pin 塑料注射模零件 第13部分:复位杆 |
China National Standards fo |
English PDF |
GB/T 4169.12-2006 |
Components of injection moulds for plastics - Part 12: Ejector guide bush 塑料注射模零件 第12部分:推板导套 |
China National Standards fo |
English PDF |
GB/T 4169.1-2006 |
Components of injection moulds for plastics - Part 1: Ejector pin 塑料注射模零件 第1部分:推杆 |
China National Standards fo |
English PDF |
GB/T 4169.11-2006 |
Components of injection moulds for plastics - Part 11: Round locating element 塑料注射模零件 第11部分:圆形定位元件 |
China National Standards fo |
English PDF |
GB/T 4169.10-2006 |
Components of injection moulds for plastics - Part 10: Support pillar 塑料注射模零件 第10部分:支承柱 |
China National Standards fo |
English PDF |
GB/T 12556-2006 |
Specification of injection mould bases for plastics 塑料注射模模架技术条件 |
China National Standards fo |
English PDF |
GB/T 12555-2006 |
Injection mould bases for plastics 塑料注射模模架 |
China National Standards fo |
English PDF |
GB/T 12554-2006 |
Specifiication of injection moulds for plastics 塑料注射模技术条件 |
China National Standards fo |
English PDF |
GB 3796-2006 |
General rule for packing of pesticides 农药包装通则 |
China National Standards fo |
English PDF |
GB 20813-2006 |
Guideline on labels for pesticide products 农药产品标签通则 |
China National Standards fo |
English PDF |
GB/T 20671.9-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.8-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials 非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.7-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.6-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.5-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials 非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.4-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials 非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.3-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分: 垫片材料耐液性试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.2-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials 非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法 |
China National Standards fo |
English PDF |
GB/T 20671.1-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 1: Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分: 非金属垫片材料分类体系 |
China National Standards fo |
English PDF |
GB/T 20671.11-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法 |
China National Standards fo |
English PDF |
GB/T 20671.10-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法 |
China National Standards fo |
English PDF |
GB/Z 20650-2006 |
Micrographics - Legal admissibility of microforms 缩微摄影技术 缩微品的法律认可性 |
China National Standards fo |
English PDF |
GB/Z 20649-2006 |
Electronic imaging - Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk 电子成像 在WORM光盘上记录证据文件的电子记录系统的推荐管理方法 |
China National Standards fo |
English PDF |
GB/Z 20648-2006 |
Electronic imaging - Recommendations for the expungement of information recorded on write-once optical media 电子成像 擦除记录在一次写入光学介质上的信息的推荐方法 |
China National Standards fo |
English PDF |
GB/T 20258.3-2006 |
Data dictionary for fundamental geographic information features - Part 3:Data dictionary for fundamental geographic information features of 1:25 000 1:50 000 1:100 000 scale 基础地理信息要素数据字典 第3部分:1:25 000 1:50 000 1:100 000基础地理信息要素数据字典 |
China National Standards fo |
English PDF |
GB/T 17574.9-2006 |
Semiconductor devices - Integrated circuits - Part 2-9: Digital integrated circuits - Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories 半导体器件 集成电路 第2-9部分:数字集成电路 紫外光擦除电可编程MOS只读存储器空白详细规范 |
China National Standards fo |
English PDF |
GB/T 17574.11-2006 |
Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory 半导体器件 集成电路 第2-11部分:数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范 |
China National Standards fo |
English PDF |
GB/T 20647.8-2006 |
Guidelines for community service - Part 8: Homemaking service 社区服务指南 第8部分:家政服务 |
China National Standards fo |
English PDF |
GB/T 20647.7-2006 |
Guideline for community service - Part 7: Community aid 社区服务指南 第7部分: 社区扶助服务 |
China National Standards fo |
English PDF |
GB/T 20647.6-2006 |
Guidelines for community service - Part 6: Service for adolescence 社区服务指南 第6部分 青少年服务 |
China National Standards fo |
English PDF |
GB/T 20647.5-2006 |
Guideline for community service - Part 5: Law service 社区服务指南 第5部分:法律服务 |
China National Standards fo |
English PDF |
GB/T 20647.4-2006 |
Guideline for community services - Part 4: Healthcare service 社区服务指南 第4部分:卫生服务 |
China National Standards fo |
English PDF |
GB/T 20647.3-2006 |
Guideline for community service - Part 3: Culture,education and sports service 社区服务指南 第3部分:文化、教育、体育服务 |
China National Standards fo |
English PDF |
Find out:31794Items | To Page of: First -Previous-Next -Last | [254] [255] [256] [257] [258] [259] [260] |