GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 28112-2011 |
Determination of residual dimethylcyclosiloxane volatiles in silicone rubber 硅橡胶中挥发性甲基环硅氧烷残留量的测定 |
China National Standards in |
English PDF |
GB/T 27979-2011 |
Alumina ceramic wear-resistant composite lining board 氧化铝耐磨陶瓷复合衬板 |
China National Standards in |
English PDF |
GB/T 27978-2011 |
Determination of the waste content in the raw mix of cement 水泥生产原料中废渣用量的测定方法 |
China National Standards in |
English PDF |
GB/T 27976-2011 |
Tube mill equipment for cement industry 水泥工业管磨装备 |
China National Standards in |
English PDF |
GB/T 27974-2011 |
Methods for chemical analysis of fly ash and coal gangue as building material 建材用粉煤灰及煤矸石化学分析方法 |
China National Standards in |
English PDF |
GB/T 27972-2011 |
Dry-hanging hollow ceramic slab 干挂空心陶瓷板 |
China National Standards in |
English PDF |
GB/T 27946-2011 |
Limited value of hazardous substance in the air of heat treatment working place 热处理工作场所空气中有害物质的限值 |
China National Standards in |
English PDF |
GB/T 27945.3-2011 |
The management of hazardous solid wastes from heat treatment salts Part 3 :Method of innocent treatment 热处理盐浴有害固体废物的管理 第3部分:无害化处理方法 |
China National Standards in |
English PDF |
GB/T 27941-2011 |
Code of design and installation for multi-split air conditioning (heat pump)system 多联式空调(热泵)机组应用设计与安装要求 |
China National Standards in |
English PDF |
GB/T 27940-2011 |
Single-stage positive displacement refrigerant compressors parallel unit for commercial refrigeration application 制冷用容积式单级制冷压缩机并联机组 |
China National Standards in |
English PDF |
GB/T 27939-2011 |
Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics 滑动轴承 几何和材料质量特性的质量控制技术和检验 |
China National Standards in |
English PDF |
GB/T 27938-2011 |
Plain bearings - Thrust washers - Terms, appearance of damage and cause of failure 滑动轴承 止推垫圈 失效损坏术语、外观特征及原因 |
China National Standards in |
English PDF |
GB/T 27686-2011 |
The metal scraps in waste electrical and electronic equipment 电子废弃物中金属废料废件 |
China National Standards in |
English PDF |
GB/T 27685-2011 |
Portable aluminium alloy ladders 便携式铝合金梯 |
China National Standards in |
English PDF |
GB/T 27684-2011 |
Seamless and welded fittings for titanium and titanium alloy 钛及钛合金无缝和焊接管件 |
China National Standards in |
English PDF |
GB/T 27683-2011 |
Specifications for recovery of cutting filings of free-cutting copper alloys 易切削铜合金切削废屑回收规范 |
China National Standards in |
English PDF |
GB/T 27681-2011 |
Specification on zero emissions and recycling of cooling water during melting and casting for copper and copper alloy 铜及铜合金熔铸冷却水零排放和循环利用规范 |
China National Standards in |
English PDF |
GB/T 27680-2011 |
Copper,lead ,zinc and nickel concentrates - Experimental methods for checking the bias of sampling 铜、铅、锌和镍精矿 检查取样误差的实验方法 |
China National Standards in |
English PDF |
GB/T 27679-2011 |
Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling 铜、铅、锌和镍精矿 检查取样精密度的实验方法 |
China National Standards in |
English PDF |
GB/T 27678-2011 |
The technical specification of waste water recycle fo hydrometallurgical zinc enterprise 湿法炼锌企业废水循环利用技术规范 |
China National Standards in |
English PDF |
GB/T 27677-2011 |
Aluminium hardeners 铝中间合金 |
China National Standards in |
English PDF |
GB/T 27676-2011 |
Aluminium and aluminium alloy tube bus conductors 铝及铝合金管形导体 |
China National Standards in |
English PDF |
GB/T 27675-2011 |
Designation system for aluminium and aluminium alloys composite sheets, strips and foils 铝及铝合金复合板、带、箔材牌号表示方法 |
China National Standards in |
English PDF |
GB/T 27674-2011 |
Copper,lead and zinc sulfide concentrates - Determination of hygroscopic moisture in the analysis sample - ?Gravimetric method 硫化铜、铅和锌精矿 试样中湿存水分的测定 重量法 |
China National Standards in |
English PDF |
GB/T 27673-2011 |
Copper,lead,zinc and nickel concentrates - Determination of mass loss of bulk material on drying 硫化铜、铅、锌和镍精矿 散装干物料质量损失的测定 |
China National Standards in |
English PDF |
GB/T 27672-2011 |
Copper and copper alloy seamless tube for welding and cutting 焊割用铜及铜合金无缝管 |
China National Standards in |
English PDF |
GB/T 27670-2011 |
Clad aluminium alloy welded tubes for heat exchangers of vehicles 车辆热交换器用复合铝合金焊管 |
China National Standards in |
English PDF |
GB/T 27613-2011 |
Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the gravimetric method 液压传动 液体污染 采用称重法测定颗粒污染度 |
China National Standards in |
English PDF |
GB/T 20485.31-2011 |
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity 振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试 |
China National Standards in |
English PDF |
GB/T 18570.6-2011 |
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法 |
China National Standards in |
English PDF |
GB/T 17850.6-2011 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 |
China National Standards in |
English PDF |
GB/T 16474-2011 |
Designation system for wrought aluminium and aluminium alloy 变形铝及铝合金牌号表示方法 |
China National Standards in |
English PDF |
GB/T 14904-2011 |
Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 |
China National Standards in |
English PDF |
GB/T 13288.2-2011 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards in |
English PDF |
GB/T 12716-2011 |
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads 60°密封管螺纹 |
China National Standards in |
English PDF |
GB/T 12613.7-2011 |
Plain bearings - Wrapped bushes - Part 7:Measurement of wall thickness of thin-walled bushes 滑动轴承 卷制轴套 第7部分:薄壁轴套壁厚测量 |
China National Standards in |
English PDF |
GB/T 12613.6-2011 |
Plain bearings - Wrapped bushes - Part 6:Checking the inside diameter 滑动轴承 卷制轴套 第6部分:内径检验 |
China National Standards in |
English PDF |
GB/T 12613.5-2011 |
Plain bearings - Wrapped bushes - Part 5: Checking the outside diameter 滑动轴承 卷制轴套 第5部分:外径检验 |
China National Standards in |
English PDF |
GB/T 12613.4-2011 |
Plain bearings - Wrapped bushes - Part 4: Materials 滑动轴承 卷制轴套 第4部分:材料 |
China National Standards in |
English PDF |
GB/T 12613.3-2011 |
Plain bearings - Wrapped bushes - Part 3:Lubrication holes, grooves and indentations 滑动轴承 卷制轴套 第3部分:润滑油孔、油槽和油穴 |
China National Standards in |
English PDF |
GB/T 12613.2-2011 |
Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters 滑动轴承 卷制轴套 第2部分: 外径和内径的检测数据 |
China National Standards in |
English PDF |
GB/T 12613.1-2011 |
Plain bearings - Wrapped bushes - Part 1:Dimensions 滑动轴承 卷制轴套 第1部分: 尺寸 |
China National Standards in |
English PDF |
GB/T 11348.3-2011 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines 机械振动 在旋转轴上测量评价机器的振动 第3部分:耦合的工业机器 |
China National Standards in |
English PDF |
GB/T 9987-2011 |
Glass contains - Manufacture - Vocabulary 玻璃瓶罐制造术语 |
China National Standards in |
English PDF |
GB/T 28204-2011 |
Household and similar used film electric heating elements 家用和类似用途膜状电热元件 |
China National Standards in |
English PDF |
GB/T 28202-2011 |
Furniture industry terminology 家具工业术语 |
China National Standards in |
English PDF |
GB/T 28200-2011 |
Technical requirements and test methods of steeliness storage units(rack) 钢制储物柜(架)技术要求及试验方法 |
China National Standards in |
English PDF |
GB/T 28198-2011 |
Ventilator for windows 窗用动力通风器 |
China National Standards in |
English PDF |
GB/T 28197-2011 |
Methods for characterising tristimulus colorimeters for measuring the colour of light 测量光源颜色用三刺激值色度计的表征方法 |
China National Standards in |
English PDF |
GB/T 28196-2011 |
Determination of annealing point and strain point for glass 玻璃退火点和应变点测试方法 |
China National Standards in |
English PDF |
GB/T 28195-2011 |
Determination of softening point for glass 玻璃软化点测试方法 |
China National Standards in |
English PDF |
GB/T 28194-2011 |
Glass - Double liner method for determination thermal coefficient expansion 玻璃 双线法线热膨胀系数的测定 |
China National Standards in |
English PDF |
GB/T 28193-2011 |
Determination of chloroacetic acid(chloroacetate) contents in surfactants 表面活性剂中氯乙酸(盐)残留量的测定 |
China National Standards in |
English PDF |
GB/T 28192-2011 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions 表面活性剂 洗涤剂 在酸性条件下可水解和不可水解的阴离子活性物的测定 |
China National Standards in |
English PDF |
GB/T 28191-2011 |
Surface active agents - Detergents - Anionic active matter stable to acid hydrolysis - Determination of trace amounts 表面活性剂 洗涤剂 对酸解稳定的阴离子活性物 痕量的测定 |
China National Standards in |
English PDF |
GB/T 28190-2011 |
Textiles - Determination of dimethyl fumarate 纺织品 富马酸二甲酯的测定 |
China National Standards in |
English PDF |
GB/T 28189-2011 |
Textiles - Determination of polycyclic aromatic hydrocarbons 纺织品 多环芳烃的测定 |
China National Standards in |
English PDF |
GB/T 28188-2011 |
Textiles - Determination of elasticity of horsetail hair interlining - Loop with hanging weight 纺织品 马尾衬布回弹性的测定 环状挂重法 |
China National Standards in |
English PDF |
GB/T 28187-2011 |
Textile machinery - Dyeing and finishing machines - Square bars for winding devices - Dimensions 纺织机械 染整机器 卷绕装置用方轴尺寸 |
China National Standards in |
English PDF |
GB/T 28186-2011 |
Textile machinery - Dyeing and finishing machines - Nominal speeds 纺织机械 染整机器 公称速度 |
China National Standards in |
English PDF |
GB/T 2677.2-2011 |
Determination of moisture content in fibrous raw material 造纸原料水分的测定 |
China National Standards in |
English PDF |
GB/T 28219-2011 |
General rules of intelligentization technology for intelligent household appliances 智能家用电器的智能化技术通则 |
China National Standards in |
English PDF |
GB/T 28218-2011 |
Pulps - Determination of fibre length by automated optical analysis - Image analysis method 纸浆 纤维长度的测定 图像分析法 |
China National Standards in |
English PDF |
GB/T 28216-2011 |
General principles - Assessment and control on consumer products quality safety factors 消费品质量安全因子评估和控制 通则 |
China National Standards in |
English PDF |
GB/T 28214-2011 |
Laboratory glassware - Pipettes colour coding 实验室玻璃仪器 吸量管颜色标记 |
China National Standards in |
English PDF |
GB/T 27869-2011 |
Electrostatic-fabric integrated precipitator 电袋复合除尘器 |
China National Standards in |
English PDF |
GB/T 27868-2011 |
Starch-based biodegradable resin 可生物降解淀粉树脂 |
China National Standards in |
English PDF |
GB/T 17592-2011 |
Textiles - Determination of the banned azo colourants 纺织品 禁用偶氮染料的测定 |
China National Standards in |
English PDF |
GB/T 1468-2011 |
Tracing paper 描图纸 |
China National Standards in |
English PDF |
GB/T 13508-2011 |
Polyethylene blown containers 聚乙烯吹塑容器 |
China National Standards in |
English PDF |
GB/T 13206-2011 |
Glycerines 甘油 |
China National Standards in |
English PDF |
GB/T 12804-2011 |
Laboratory glassware - Graduated measuring cylinders 实验室玻璃仪器 量筒 |
China National Standards in |
English PDF |
GB/T 28118-2011 |
Plastics and aluminum foil laminated films and pouches for food packaging 食品包装用塑料与铝箔复合膜、袋 |
China National Standards in |
English PDF |
GB/T 28117-2011 |
Multi-layer co-extrusion films and pouches for food packaging 食品包装用多层共挤膜、袋 |
China National Standards in |
English PDF |
GB/T 28116-2011 |
Antibacterial bone china 抗菌骨质瓷器 |
China National Standards in |
English PDF |
GB/T 28115-2011 |
High-silica porcelain ware 高石英瓷器 |
China National Standards in |
English PDF |
GB/T 28114-2011 |
Magnesium reinforced porcelain ware 镁质强化瓷器 |
China National Standards in |
English PDF |
GB/T 27885-2011 |
Determination of hydrogen、nitrogen、carbon monoxide carbon dioxide and C1~C8 hydrocarbons in the coal-based F-T synthetic tail gas - Gas chromatographic method 煤基费托合成尾气中 H2、N2、CO2和C1~C8烃的测定 气相色谱法 |
China National Standards in |
English PDF |
GB/T 27884-2011 |
Determination of hydrogen、nitrogen、carbon monoxide carbon dioxide and methane in the coal-based F-T synthesis feed gas - Gas chromatographic method 煤基费托合成原料气中H2、N2、CO、CO2和CH4的测定 气相色谱法 |
China National Standards in |
English PDF |
GB/T 27828-2011 |
Chemicals - Test method of in vitro skin corrosion - Transcutaneous electrical resistance test(TER) 化学品 体外皮肤腐蚀 经皮电阻试验方法 |
China National Standards in |
English PDF |
GB/T 27827-2011 |
Chemicals - Test method of in vivo sister chromatid exchange 化学品 体内姊妹染色单体交换试验方法 |
China National Standards in |
English PDF |
GB/T 27825-2011 |
Chemicals - Test method for skin absorption - In vivo 化学品 皮肤吸收 体内试验方法 |
China National Standards in |
English PDF |
GB/T 27824-2011 |
Chemicals - Test method of acute inhalation toxicity - Fixed concentration procedure 化学品 急性吸入毒性 固定浓度试验方法 |
China National Standards in |
English PDF |
GB/T 27822-2011 |
Chemicals - Test method of sex - Linked recessive lethal in Drosophila Melanogaster 化学品 黑腹果蝇伴性隐性致死试验方法 |
China National Standards in |
English PDF |
GB/T 27820-2011 |
Chemicals - Test method of in vitro mammalian cells sister chromatid exchange 化学品 体外哺乳动物细胞姊妹染色单体交换试验方法 |
China National Standards in |
English PDF |
GB/T 27819-2011 |
Chemicals - Test method of in vitro mammalian cell transformation 化学品 体外哺乳动物细胞转化试验方法 |
China National Standards in |
English PDF |
GB/T 27818-2011 |
Chemicals - Testing method for skin absorption-in vitro 化学品 皮肤吸收 体外试验方法 |
China National Standards in |
English PDF |
GB/T 27799-2011 |
Fabric reinforce plastic cover panel of trucks 载货汽车用复合材料覆盖件 |
China National Standards in |
English PDF |
GB/T 27797.9-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分:GMT/STC模塑 |
China National Standards in |
English PDF |
GB/T 27797.8-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑 |
China National Standards in |
English PDF |
GB/T 27797.7-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分:树脂传递模塑 |
China National Standards in |
English PDF |
GB/T 27797.6-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分:拉挤模塑 |
China National Standards in |
English PDF |
GB/T 27797.5-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分:缠绕成型 |
China National Standards in |
English PDF |
GB/T 27797.3-2011 |
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分:湿法模塑 |
China National Standards in |
English PDF |
GB/T 27797.2-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分:接触和喷射模塑 |
China National Standards in |
English PDF |
GB/T 27797.1-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分:通则 |
China National Standards in |
English PDF |
GB/T 27797.11-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards in |
English PDF |
GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards in |
English PDF |
GB/T 27796-2011 |
Straw plates used in buildings 建筑用秸秆植物板材 |
China National Standards in |
English PDF |
GB/T 27795-2011 |
Test method for corrosion testing of non-metallic gaskets 非金属垫片腐蚀性试验方法 |
China National Standards in |
English PDF |
Find out:41184Items | To Page of: First -Previous-Next -Last | [211] [212] [213] [214] [215] [216] [217] |