GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 29509.2-2013 |
Methods for chemical analysis of gold-loaded carbon - Part 2:Determination of silver content - Flame atomic absorption spectrometry 载金炭化学分析方法 第2部分:银量的测定 火焰原子吸收光谱法 |
China National Standards load |
English PDF |
GB/T 29509.1-2013 |
Methods for chemical analysis of gold-loaded carbon - Part 1: Determination of gold content 载金炭化学分析方法 第1部分:金量的测定 |
China National Standards load |
English PDF |
GB/T 29489-2013 |
lnductive load switching of high-voltage alternating current switchgear and controlgear 高压交流开关设备和控制设备的感性负载开合 |
China National Standards load |
English PDF |
GB/T 29026-2012 |
Spring loaded safety valve for cryogenic service 低温介质用弹簧直接载荷式安全阀 |
China National Standards load |
English PDF |
GB/T 29049-2012 |
Doorsets - Vertical load test 整樘门 垂直荷载试验 |
China National Standards load |
English PDF |
GB/T 4662-2012 |
Rolling bearings - Static load ratings 滚动轴承 额定静载荷 |
China National Standards load |
English PDF |
GB 50816-2012 |
Code for design of wastewater treatment of ammunition loading 弹药装药废水处理设计规范 |
China National Standards load |
English PDF |
GB 50759-2012 |
Code for design of vapor recovery facilities of oil products loading system 油品装载系统油气回收设施设计规范 |
China National Standards load |
English PDF |
GB 50009-2012 |
load code for the design of building structures 建筑结构荷载规范 |
China National Standards load |
English PDF |
GB/T 27924-2011 |
Sizes and load ratings for industrial rack 工业货架规格尺寸与额定荷载 |
China National Standards load |
English PDF |
GB/T 20633.3-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3:Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace(Class 3) 承载印制电路板用涂料(敷形涂料) 第3部分:一般用(1级)、高可靠性用(2级)和航空航天用(3级)涂料 |
China National Standards load |
English PDF |
GB/T 20633.2-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 2:Methods of test 承载印制电路板用涂料(敷形涂料) 第2部分:试验方法 |
China National Standards load |
English PDF |
GB/T 28046.4-2011 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads 道路车辆 电气及电子设备的环境条件和试验 第4部分:气候负荷 |
China National Standards load |
English PDF |
GB/T 28046.3-2011 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads 道路车辆 电气及电子设备的环境条件和试验 第3部分:机械负荷 |
China National Standards load |
English PDF |
GB/T 28046.2-2011 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads 道路车辆 电气及电子设备的环境条件和试验 第2部分:电气负荷 |
China National Standards load |
English PDF |
GB/T 28045-2011 |
Road vehicles - Electrical and electronic equipment for a supply voltage of 42V - Electrical loads 道路车辆 42V供电电压的电气和电子设备 电气负荷 |
China National Standards load |
English PDF |
GB/T 26949.10-2011 |
Industrial trucks - Verification of stability - Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices 工业车辆 稳定性验证 第10部分:在由动力装置侧移载荷条件下堆垛作业的附加稳定性试验 |
China National Standards load |
English PDF |
GB/T 26946.2-2011 |
Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6m length and above 侧面式叉车 第2部分:搬运6m及其以上长度货运集装箱叉车的附加稳定性试验 |
China National Standards load |
English PDF |
GB/T 26946.1-2011 |
Single side loading fork-lift trucks - Part 1: Stability tests 侧面式叉车 第1部分:稳定性试验 |
China National Standards load |
English PDF |
GB/T 12668.6-2011 |
Adjustable speed electrical power drive systems - Part 6:Guide for determination of types of load duty and corresponding current ratings 调速电气传动系统 第6部分:确定负载工作制类型和相应电流额定值的导则 |
China National Standards load |
English PDF |
GB/T 26475-2011 |
Bridge type grab ship unloader 桥式抓斗卸船机 |
China National Standards load |
English PDF |
GB/T 26473-2011 |
Cranes - Safety requirements for loader cranes 起重机 随车起重机安全要求 |
China National Standards load |
English PDF |
GB 14470.3-2011 |
Effluent standads of water pollutants for ammunition loading 弹药装药行业水污染物排放标准 |
China National Standards load |
English PDF |
GB/T 6391-2010 |
Rolling bearings - Dynamic load ratings and rating life 滚动轴承 额定动载荷和额定寿命 |
China National Standards load |
English PDF |
GB/T 17215.101-2010 |
Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM 电测量 抄表、费率和负荷控制的数据交换 术语 第1部分:与使用DLMS/COSEM的测量设备交换数据相关的术语 |
China National Standards load |
English PDF |
GB/T 25851.1-2010 |
Mobile cranes - Experimental determination of crane performance Part1: Tipping loads and radii 流动式起重机 起重机性能的试验测定 第1部分:倾翻载荷和幅度 |
China National Standards load |
English PDF |
GB/T 22437.4-2010 |
Cranes - Design principles for loads and load combinations - Part 4: Jib cranes 起重机 载荷与载荷组合的设计原则 第4部分:臂架起重机 |
China National Standards load |
English PDF |
GB/T 22437.2-2010 |
Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes 起重机 载荷与载荷组合的设计原则 第2部分:流动式起重机 |
China National Standards load |
English PDF |
GB 25684.4-2010 |
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders 土方机械 安全 第4部分:挖掘装载机的要求 |
China National Standards load |
English PDF |
GB 25684.3-2010 |
Earth-moving machinery - Safety - Part 3: Requirements for loaders 土方机械 安全 第3部分:装载机的要求 |
China National Standards load |
English PDF |
GB 25779-2010 |
loadbearing concrete perforated bricks 承重混凝土多孔砖 |
China National Standards load |
English PDF |
GB/T 25940-2010 |
IRHD dead-load testers 定负荷国际橡胶硬度计 |
China National Standards load |
English PDF |
GB/T 25694-2010 |
Earth-moving machinery - Skid-steer loaders 土方机械 滑移转向装载机 |
China National Standards load |
English PDF |
GB 25525-2010 |
Track-type loading machine underground mine - Safety requirements 地下矿用履带装载机械 安全要求 |
China National Standards load |
English PDF |
GB 25524-2010 |
Track wheel loading machine for underground mine - Safety requirements 地下矿用轨轮装载机械 安全要求 |
China National Standards load |
English PDF |
GB 25518-2010 |
Underground load-haul-dump - Safety requirements 地下铲运机 安全要求 |
China National Standards load |
English PDF |
GB 10395.23-2010 |
Agricultural and forestry machinery - Safety - Part 23:Silos stationary unloaders for round silos 农林机械 安全 第23部分:固定式圆形青贮窖卸料机 |
China National Standards load |
English PDF |
GB 10395.22-2010 |
Agricultural and forestry machinery - Safety - Part 22:Front loaders 农林机械 安全 第22部分:前装载装置 |
China National Standards load |
English PDF |
GB/T 25653-2010 |
Bucket loader 铲斗装岩机 |
China National Standards load |
English PDF |
GB/T 25619-2010 |
Earth-moving machinery - Coupling of attachments to skid steer loaders 土方机械 滑移转向装载机附属装置的联接 |
China National Standards load |
English PDF |
GB/T 25604-2010 |
Earth-moving machinery - loaders - Terminology and commercial specifications 土方机械 装载机 术语和商业规格 |
China National Standards load |
English PDF |
GB/T 10170-2010 |
Backhoe loader - Technical specifications 挖掘装载机 技术条件 |
China National Standards load |
English PDF |
GB/T 25354-2010 |
Acceptance standards for the interchange of transferred unit load devices 航空集装器转运验收规范 |
China National Standards load |
English PDF |
GB/Z 25426-2010 |
Wind turbine generator systems measurement of mechanical loads 风力发电机组 机械载荷测量 |
China National Standards load |
English PDF |
GB/T 23561.13-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 13: Methods for determining point load strength index of coal and rock 煤和岩石物理力学性质测定方法 第13部分:煤和岩石点载荷强度指数测定方法 |
China National Standards load |
English PDF |
GB/T 25090-2010 |
Step-down power saving device for asynchronous motor at light load 电动机轻载调压节电装置 |
China National Standards load |
English PDF |
GB/T 25028-2010 |
Wheel loader - Booster using for brake system - Technical specifications 轮胎式装载机 制动系统用加力器 技术条件 |
China National Standards load |
English PDF |
GB 24939-2010 |
Tri-wheel vehicle self-unloading system - Safety requirements 三轮汽车自卸系统 安全技术要求 |
China National Standards load |
English PDF |
GB 24938-2010 |
Low-speed goods vehicle - Self-unloading system - Safety requirements 低速货车自卸系统 安全技术要求 |
China National Standards load |
English PDF |
GB/T 24654-2009 |
Agricultural wheeled tractors and attachment - Front loaders - Carriages for attachments 农业轮式拖拉机及附加装置 前装载装置 连接支架 |
China National Standards load |
English PDF |
GB/T 24530-2009 |
Iron ores for blast furnace feedstocks - Determination of reduction under load 高炉用铁矿石 荷重还原性的测定 |
China National Standards load |
English PDF |
GB/T 24497-2009 |
Performance standards in building - Performance test for precast concrete floors - Behavior under concentrated load 建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况 |
China National Standards load |
English PDF |
GB/T 24496-2009 |
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels - Laboratory mechanical tests - Effect of tangential loading 钢筋混凝土大板间有连接筋并用混凝土浇灌的键槽式竖向接缝 实验室力学试验 平面内切向荷载的影响 |
China National Standards load |
English PDF |
GB/T 24495-2009 |
Horizontal joints between load-bearing walls and concrete floors - Laboratory mechanical tests - Effect of vertical loading and of moments transmitted by the floors 承重墙与混凝土楼板间的水平接缝 实验室力学试验 由楼板传来的垂直荷载和弯矩的影响 |
China National Standards load |
English PDF |
GB/T 24492-2009 |
Nonload bearing concrete hollow brick 非承重混凝土空心砖 |
China National Standards load |
English PDF |
GB/T 24185-2009 |
Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method 逐级加力法测定钢中氢脆临界值试验方法 |
China National Standards load |
English PDF |
GB/T 23914.2-2009 |
load restraint assemblies on road vehicles - Safety - Part 2: Web lashing assembly made from synthetic fibres 道路车辆装载物固定装置 安全性 第2部分:合成纤维栓紧带总成 |
China National Standards load |
English PDF |
GB 12602-2009 |
Lifting appliances-safety devices against overloading 起重机械超载保护装置 |
China National Standards load |
English PDF |
GB/T 3690-2009 |
Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method 织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法 |
China National Standards load |
English PDF |
GB/T 2980-2009 |
Size designation, dimensions, inflation pressure and load capacity for earth-mover tyres 工程机械轮胎规格、尺寸、气压与负荷 |
China National Standards load |
English PDF |
GB/T 16622-2009 |
Size designation,dimensions and load capacity for pressed-on solid tyres 压配式实心轮胎规格、尺寸与负荷 |
China National Standards load |
English PDF |
GB/T 15328-2009 |
Classical V-belts - Fatigue test -non-loading method 普通V带疲劳试验方法 无扭矩法 |
China National Standards load |
English PDF |
GB/T 10823-2009 |
Size designation, dimensions and load capacity of solid tyres for pneumatic tyres rims 充气轮胎轮辋实心轮胎规格、尺寸与负荷 |
China National Standards load |
English PDF |
GB/T 14741-2009 |
Port pneumatic grain unloader 港口吸粮机 |
China National Standards load |
English PDF |
GB/T 23427-2009 |
Shipbuilding and marine structures - Eye and fork assemblies under tension load - Main dimensions 造船与海上结构物 受拉伸负荷的眼板和叉头组件 主要尺寸 |
China National Standards load |
English PDF |
GB/T 23423-2009 |
Aircraft - Wide body aircraft main deck container/pallet loader - Functional requirements 宽体飞机主舱集装箱、集装板装载机功能要求 |
China National Standards load |
English PDF |
GB/T 23421-2009 |
Aircraft - Basic requirements for aircraft loading equipment+(No.1 modification sheet) 飞机装载设备基本要求+(第1号修改单) |
China National Standards load |
English PDF |
GB/T 23420-2009 |
Aircraft - Wide body aircraft lower deck container/pallet loader - Functional requirements 宽体飞机下舱集装箱、集装板装载机功能要求 |
China National Standards load |
English PDF |
GB/T 22934-2008 |
Glass containers - Resistance to vertical load - Test method 玻璃容器 耐垂直负荷试验方法 |
China National Standards load |
English PDF |
GB/T 15825.3-2008 |
Sheet metal formability and test methods - Part 3: Drawing and drawing load test 金属薄板成形性能与试验方法 第3部分:拉深与拉深载荷试验 |
China National Standards load |
English PDF |
GB 9706.13-2008 |
Medical electrical equipment - Part 2: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment 医用电气设备 第2部分:自动控制式近距离治疗后装设备安全专用要求 |
China National Standards load |
English PDF |
GB 17918-2008 |
Safety regulations for dust explosion protection in raw grain loading and unloading system in port 港口散粮装卸系统粉尘防爆安全规程 |
China National Standards load |
English PDF |
GB/Z 22559.2-2008 |
Gears - Thermal capacity - Part 2: Thermal load-carrying capacity 齿轮 热功率 第2部分:热承载能力计算 |
China National Standards load |
English PDF |
GB/T 3480.5-2008 |
Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分:材料的强度和质量 |
China National Standards load |
English PDF |
GB/T 22437.5-2008 |
Cranes - Design principles for loads and load combinations - Part 5: Overhead traveling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分:桥式和门式起重机 |
China National Standards load |
English PDF |
GB/T 22437.3-2008 |
Cranes - Design principles for loads and load combinations - Part 3: Tower cranes 起重机 载荷与载荷组合的设计原则 第3部分:塔式起重机 |
China National Standards load |
English PDF |
GB/T 22437.1-2008 |
Cranes - Design principles for loads and load combinations - Part 1: General 起重机 载荷与载荷组合的设计原则 第1部分:总则 |
China National Standards load |
English PDF |
GB/T 22415-2008 |
Cranes - Requirments for test loads 起重机 对试验载荷的要求 |
China National Standards load |
English PDF |
GB/T 2315-2008 |
Nominal failing load series and coupling dimensions for electric power fittings 电力金具 标称破坏载荷系列及连接型式尺寸 |
China National Standards load |
English PDF |
GB/T 15148-2008 |
Technical specification of power load management system 电力负荷管理系统技术规范 |
China National Standards load |
English PDF |
GB/T 1094.7-2008 |
Power transformers - Part 7: loading guide for oil-immersed power transformers 电力变压器 第7部分:油浸式电力变压器负载导则 |
China National Standards load |
English PDF |
GB/T 13751-2008 |
Backhoe loader - Test methods 挖掘装载机 试验方法 |
China National Standards load |
English PDF |
GB/T 13332-2008 |
Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces 土方机械 液压挖掘机和挖掘装载机 挖掘力的测定方法 |
China National Standards load |
English PDF |
GB/T 10175.2-2008 |
Earth moving machinery - loaders and backhoe loaders - Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height 土方机械 装载机和挖掘装载机 第2部分:掘起力和最大提升高度提升能力的测试方法 |
China National Standards load |
English PDF |
GB/T 10175.1-2008 |
Earth moving machinery - loaders and backhoe loaders - Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load 土方机械 装载机和挖掘装载机 第1部分:额定工作载荷的计算和验证倾翻载荷计算值的测试方法 |
China National Standards load |
English PDF |
GB/T 1149.14-2008 |
Internal combustion engines - Piston rings - Part 14: Coil-spring-loaded oil control rings 内燃机 活塞环 第14部分:螺旋撑簧油环 |
China National Standards load |
English PDF |
GB/T 17215.421-2008 |
Electricity metering equipment (a.c) - Tariff and load control - Part 21: Particular requirements for time switches 交流测量-费率和负荷控制 第21部分:时间开关的特殊要求 |
China National Standards load |
English PDF |
GB/T 7106-2008 |
Graduations and test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors 建筑外门窗气密、水密、抗风压性能分级及检测方法 |
China National Standards load |
English PDF |
GB/T 16470-2008 |
Palletized unit loads 托盘单元货载 |
China National Standards load |
English PDF |
GB/Z 22204-2008 |
Reliability test method for overload relay 过载继电器可靠性试验方法 |
China National Standards load |
English PDF |
GB/T 7551-2008 |
load cells 称重传感器 |
China National Standards load |
English PDF |
GB/T 9978.9-2008 |
Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements 建筑构件耐火试验方法 第9部分:非承重吊顶构件的特殊要求 |
China National Standards load |
English PDF |
GB/T 9978.8-2008 |
Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements 建筑构件耐火试验方法 第8部分:非承重垂直分隔构件的特殊要求 |
China National Standards load |
English PDF |
GB/T 9978.5-2008 |
Fire-resistance tests-Elements of building construction-Part 5: Specific requirements for loadbearing horizontal separating elements 建筑构件耐火试验方法 第5部分:承重水平分隔构件的特殊要求 |
China National Standards load |
English PDF |
GB/T 9978.4-2008 |
Fire-resistance tests-Elements of building construction-Part 4: Specific requirements for loadbearing vertical separating elements 建筑构件耐火试验方法 第4部分:承重垂直分隔构件的特殊要求 |
China National Standards load |
English PDF |
GB/T 13772.2-2008 |
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method 纺织品 机织物接缝处纱线抗滑移的测定 第2部分:定负荷法 |
China National Standards load |
English PDF |
GB/T 2979-2008 |
Size desination,dimensions,inflation pressure and load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards load |
English PDF |
GB/T 2977-2008 |
Size designation,dimensions,inflation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards load |
English PDF |
GB/T 21942-2008 |
Earth-moving machinery - loader and front loading excavator buckets - Volumetric ratings 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards load |
English PDF |
GB/T 21941-2008 |
Earth-moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders 土方机械 液压挖掘机和挖掘装载机的反铲斗和抓铲斗 容量标定 |
China National Standards load |
English PDF |
Find out:390Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |