Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HG/T 5950-2021 |
Chromophan AS-IRG (4-Chloro-2,5-dimethoxyacetoacetanilide) 色酚AS-IRG（4-氯-2,5-二甲氧基乙酰乙酰苯胺） |
mop China Chemistry Industry Standards |
 English PDF |
| GB/T 20076-2021 |
Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds 摩托车和轻便摩托车发动机最大扭矩和最大净功率测量方法 |
mop China GB-National Standards |
English PDF |
| GB/T 40933-2021 |
Plastics—Film and sheeting—Guidance on the testing of thermoplastic films 塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南 |
mop China GB-National Standards |
English PDF |
| GB/T 40719-2021 |
Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 |
mop China GB-National Standards |
English PDF |
| GB/T 39693.9-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 |
mop China GB-National Standards |
English PDF |
| GB/T 40797-2021 |
Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 |
mop China GB-National Standards |
English PDF |
| GB/T 40409-2021 |
Flame retardant chemical—Tetrabromophthalate diol 阻燃化学品 四溴苯酐二醇 |
mop China GB-National Standards |
English PDF |
| GB/T 40322-2021 |
Thermoplastic elastomer—Specifications of door sealmaterials for household and similar refrigerating appliances 热塑性弹性体 家用和类似用途制冷器具用门密封材料规范 |
mop China GB-National Standards |
English PDF |
| GB/T 40120-2021 |
Agricultural irrigation equipment—Thermoplastic collapsible hoses for irrigation—Specifications and test methods 农业灌溉设备 灌溉用热塑性可折叠软管 技术规范和试验方法 |
mop China GB-National Standards |
English PDF |
| GB/T 39997-2021 |
Thermoplastic pipework for underground installation at petrol filling stations 加油站埋地用热塑性塑料复合管道系统 |
mop China GB-National Standards |
English PDF |
| GB/T 39743-2021 |
Plain bearings—Thermoplastic bushes—Dimensions and tolerance 滑动轴承 热塑性塑料轴套 尺寸与公差 |
mop China GB-National Standards |
English PDF |
| GB/T 39693.3-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 |
mop China GB-National Standards |
English PDF |
| GB/T 39693.6-2020 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 |
mop China GB-National Standards |
English PDF |
| GB/T 39692-2020 |
Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide 硫化橡胶或热塑性橡胶 低温试验 概述与指南 |
mop China GB-National Standards |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
mop China GB-National Standards |
English PDF |
| GB/T 17037.2-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
mop China GB-National Standards |
English PDF |
| GB/T 6036-2020 |
Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定（吉门试验） |
mop China GB-National Standards |
English PDF |
| GB/T 39415.2-2020 |
Packaging sacks—Method of specifications for characteristics—Part 2: Sacks made from thermoplastic flexible film 包装袋 特征性能规范方法 第2部分：热塑性软质薄膜袋 |
mop China GB-National Standards |
English PDF |
| GB/T 39395-2020 |
Test method for buckling resistance of the thermoplastics inspection chamber bases 热塑性塑料检查井井座抗压失稳试验方法 |
mop China GB-National Standards |
English PDF |
| GB/T 39385-2020 |
Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 |
mop China GB-National Standards |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
mop China GB-National Standards |
English PDF |
| GB/T 39382-2020 |
Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法 |
mop China GB-National Standards |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
mop China GB-National Standards |
English PDF |
| GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
mop China GB-National Standards |
English PDF |
| GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范 |
mop China GB-National Standards |
English PDF |
| GB/T 18252-2020 |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 |
mop China GB-National Standards |
English PDF |
| GB/T 12585-2020 |
Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定（质量法） |
mop China GB-National Standards |
English PDF |
| GB 24155-2020 |
Safety specifications for electric motorcycles and electric mopeds 电动摩托车和电动轻便摩托车安全要求 |
mop China GB-National Standards |
English PDF |
| GB/T 38725.2-2020 |
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe 可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管 |
mop China GB-National Standards |
English PDF |
| GB/T 38285-2019 |
Brakes for motorcycles and mopeds 摩托车和轻便摩托车制动器 |
mop China National Standards |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
mop China National Standards |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
mop China National Standards |
English PDF |
| GB/T 17783-2019 |
Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 |
mop China National Standards |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
mop China National Standards |
English PDF |
| GB/T 5373-2019 |
Measuring method of dimensions and masses parameter for motorcycles and mopeds 摩托车和轻便摩托车尺寸和质量参数的测定方法 |
mop China National Standards |
English PDF |
| GB/T 1685.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 |
mop China National Standards |
English PDF |
| GB/T 38352-2019 |
Thermoplastic elastomers—Designation and specification for premixture 热塑性弹性体 预混料牌号规范 |
mop China National Standards |
English PDF |
| GB/T 38285-2019 |
Brakes for motorcycles and mopeds 摩托车和轻便摩托车制动器 |
mop China National Standards |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
mop China National Standards |
English PDF |
| GB/T 17783-2019 |
Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 |
mop China National Standards |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
mop China National Standards |
English PDF |
| GB/T 5373-2019 |
Measuring method of dimensions and masses parameter for motorcycles and mopeds 摩托车和轻便摩托车尺寸和质量参数的测定方法 |
mop China National Standards |
English PDF |
| GB/T 1685.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 |
mop China National Standards |
English PDF |
| GB/T 38008-2019 |
Gate valves of thermoplastics materials 热塑性塑料闸阀 |
mop China National Standards |
English PDF |
| GB/T 37997-2019 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送烃类、溶剂和化学品用多层热塑性塑料（非硫化）软管及软管组合件 规范 |
mop China National Standards |
English PDF |
| GB/T 37842-2019 |
Ball valves of thermoplastics materials 热塑性塑料球阀 |
mop China National Standards |
English PDF |
| GB 15744-2019 |
The limits and measurement methods of fuel consumption for motorcycles and mopeds 摩托车和轻便摩托车燃油消耗量限值及测量方法 |
mop China National Standards |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
mop China National Standards |
English PDF |
| GB/T 37338-2019 |
Instrumentation for electric motorcycles and mopeds 电动摩托车和电动轻便摩托车用仪表 |
mop China National Standards |
English PDF |
| GB/T 5359.1-2019 |
Term for motorcycles and mopeds – Part 1: Types of vehicle 摩托车和轻便摩托车术语 第1部分：车辆类型 |
mop China National Standards |
English PDF |
| GB/T 34691.1-2018 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-热塑性聚酯（TP）模塑和挤出材料-第1部分：命名系统和分类基础 |
mop China National Standards |
English PDF |
| GBZ/T 310-2018 |
Determination of 1-bromopropane in urine - headspace-gas chromatography 尿中1-溴丙烷的测定-顶空-气相色谱法 |
mop China National Standards |
English PDF |
| GB/T 19278-2018 |
General terms and their definitions of thermoplastic pipes, fittings and valves 热塑性塑料管材、管件与阀门-通用术语及其定义 |
mop China National Standards |
English PDF |
| GB/T 7755.1-2018 |
Rubber,vulcanized or thermoplastic—Determination of permeability to gases—Part 1:Differential-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第1部分：压差法 |
mop China National Standards |
English PDF |
| GB/T 24156-2018 |
Electric motorcycles and electric mopeds—Power performance—Test method 电动摩托车和电动轻便摩托车 动力性能 试验方法 |
mop China National Standards |
English PDF |
| GB/T 24158-2018 |
General specifications for electric motorcycles and electric mopeds 电动摩托车和电动轻便摩托车通用技术条件 |
mop China National Standards |
English PDF |
| GB/T 36672-2018 |
Lithium-ion battery for electric mopeds and motorcycles 电动摩托车和电动轻便摩托车用锂离子电池 |
mop China National Standards |
English PDF |
| GB 20073-2018 |
Performance and measurement method for braking of motorcycles and mopeds 摩托车和轻便摩托车制动性能要求及试验方法 |
mop China National Standards |
English PDF |
| GB/T 3511-2018 |
Rubber, vulcanized or thermoplastic—Resistance to weathering 硫化橡胶或热塑性橡胶 耐候性 |
mop China National Standards |
English PDF |
| GB/T 6111-2018 |
Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure 流体输送用热塑性塑料管道系统 耐内压性能的测定 |
mop China National Standards |
English PDF |
| GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
mop China National Standards |
English PDF |
| GB/T 3682.2-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 |
mop China National Standards |
English PDF |
| GB/T 3682.1-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法 |
mop China National Standards |
English PDF |
| GB/T 22199.1-2017 |
Valve-regulated lead-acid batteries for moped—Part 1: Technical conditions 电动助力车用阀控式铅酸蓄电池 第1部分：技术条件 |
mop China National Standards |
English PDF |
| GB/T 22199.2-2017 |
Valve-regulated lead-acid batteries for moped—Part 2: Kinds of products and specifications 电动助力车用阀控式铅酸蓄电池 第2部分：产品品种和规格 |
mop China National Standards |
English PDF |
| GB/T 34903.1-2017 |
Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 1:Thermoplastics 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第1部分：热塑性塑料 |
mop China National Standards |
English PDF |
| GB/T 24157-2017 |
Test methods of range and indication for the state of charge for electric motorcycles and electric mopeds 电动摩托车和电动轻便摩托车续驶里程及残电指示试验方法 |
mop China National Standards |
English PDF |
| GB/T 18954-2017 |
Methods of setting running resistance on a chassis dynamometer for motorcycles and mopeds 摩托车和轻便摩托车底盘测功机行驶阻力的设定方法 |
mop China National Standards |
English PDF |
| GB/T 6031-2017 |
Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) |
mop China National Standards |
English PDF |
| GB/T 33796-2017 |
General requirement of thermoplastic starch 热塑性淀粉通用技术要求 |
mop China National Standards |
English PDF |
| SY/T 6795-2010 |
Steel skeleton reinforced thermoplastic resin coiled composite pipes and end fittings for petroleum and natural gas industries 石油天然气工业用钢骨架增强热塑性树脂复合连续管及接头 |
mop China Oil & Gas Industry Standards |
English PDF |
| SY/T 6770.5-2016 |
(Specification for acceptance of non - metallic pipes - Part 5: Fiber reinforced thermoplastics composite continuous tubes) 非金属管材质量验收规范 第 5 部分：纤维增强热塑性塑料复合连续管 |
mop China Oil & Gas Industry Standards |
English PDF |
| SY/T 6769.5-2016 |
(Specification for design, construction and acceptance of non - metallic pipes - Part 5: Fiber reinforced thermoplastics composite continuous tubes) 非金属管道设计、施工及验收规范第 5 部分：纤维增强热塑性塑料复合连续管 |
mop China Oil & Gas Industry Standards |
English PDF |
| SY/T 6769.4-2012 |
Specifications for the design, construction and acceptance of non-metallic pipelines. Part 4: Steel skeleton reinforced thermoplastic resin coiled composite pipes 非金属管道设计、施工及验收规范 第4部分：钢骨架增强塑料复合连续管 |
mop China Oil & Gas Industry Standards |
English PDF |
| SY/T 6662.7-2016 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 7: thermoplastics lined FRP composite pipes 石油天然气工业用非金属复合管 第7部分:热塑性塑料内衬玻璃钢复合管 |
mop China Oil & Gas Industry Standards |
English PDF |
| SY/T 6662.4-2014 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 4: Steel skeleton reinforced thermoplastic resin coiled composite pipes and end fittings 石油天然气工业用非金属复合管 第4部分：钢骨架增强热塑性塑料复合连续管及接头 |
mop China Oil & Gas Industry Standards |
English PDF |
| SY/T 6107-2010 |
Test method of reservoir thermophysical parameters 油藏热物性参数的测定方法 |
mop China Oil & Gas Industry Standards |
English PDF |
| QCN 29024-1991 |
(moped Carburetor test methods) 轻便摩托车化油器 试验方法 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QCN 29014-1991 |
(moped Carburetor technical conditions) 轻便摩托车化油器技术条件 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 976-2014 |
Buffering cover of motorcycles and mopeds wheels 摩托车和轻便摩托车车轮缓冲套 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 975-2014 |
Driving axle for right three-wheeled motorcycles and mopeds 正三轮摩托车和正三轮轻便摩托车驱动桥 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 974-2014 |
(Are three motorcycles and mopeds are three cartons technical conditions) 正三轮摩托车和正三轮轻便摩托车货箱技术条件 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 973-2014 |
Buffering chunk of motorcycles and mopeds wheels 摩托车和轻便摩托车车轮缓冲块 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 971-2014 |
Specifications of air filter element for motorcycles and mopeds 摩托车和轻便摩托车用空气滤清器滤芯技术条件 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 963-2014 |
Drum brake of motorcycles and mopeds wheels 摩托车和轻便摩托车车轮制动圈 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 962-2014 |
Specifications of painting coat for motorcycles and mopeds 摩托车和轻便摩托车漆层技术条件 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 904-2013 |
Wheels hub of motorcycles and mopeds 摩托车和轻便摩托车轮毂 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 903-2013 |
Fault-types for motorcycles and mopeds 摩托车和轻便摩托车故障模式 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 899-2013 |
Spoke nipple of motorcycles and mopeds 摩托车和轻便摩托车条母 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 898-2013 |
Wire spoke of motorcycles and mopeds 摩托车和轻便摩托车辐条 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 819-2009 |
Frame of two-wheel motorcycle and two-wheel moped 两轮摩托车和两轮轻便摩托车车架 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 818-2009 |
Spoke-wheels of motorcycles and mopeds 摩托车和轻便摩托车辐条式车轮 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 817-2009 |
Durability requirements and testing methods of reed valve type second air injectors for motorcycles and mopeds 摩托车和轻便摩托车簧片阀式二次空气补给机构耐久性要求与试验方法 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 802-2008 |
General principles of drawing and document for motorcycles and mopeds 摩托车和轻便摩托车产品图样和设计文件的基本要求 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 801-2008 |
Technical requirements and testing methods of reed valve type second air injectors for motorcycles and mopeds 摩托车和轻便摩托车簧片阀式二次空气补给机构技术要求和试验方法 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 800-2008 |
Method of bed test of continuously variable transmission for motorcycles and mopeds 摩托车和轻便摩托车自动离合无级变速器性能台架试验方法 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 797-2008 |
Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts 汽车塑料件、橡胶件和热塑性弹性体件的材料标识和标记 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 792-2007 |
Motors and controllers for electric motorcycles and electric mopeds 电动摩托车和电动轻便摩托车用电机及其控制器技术条件 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 791-2007 |
Electric motorcycles and electric mopeds. Engineering approval evaluation program 电动摩托车和电动轻便摩托车定型试验规程 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| QC/T 781-2007 |
Braking disc for motorcycles and mopeds 摩托车和轻便摩托车制动盘 |
mop China Automobile & Vehicle industry Standards |
English PDF |
| Find out:379Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
+86-755-25831330
