Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 12829-2006 |
Rubber, vulcanized or thermoplastic - Determination of tear strength of small test pieces (Delft test pieces) 硫化橡胶或热塑性橡胶小试样（德尔夫特试样）撕裂强度的测定 |
China National Standards mop |
 English PDF |
| GB/T 20462.2-2006 |
Thermoplastic tubing and hoses for automotive use―Part 2：Petroleum-based-fuel applications 汽车用热塑性非增强软管和软管 第2部分： 石油基燃油用 |
China National Standards mop |
English PDF |
| GB/T 20462.1-2006 |
Thermoplastic tubing and hoses for automotive use―Part 1： Non-fuel applications 汽车用热塑性非增强软管和软管 第1部分: 非燃油用 |
China National Standards mop |
English PDF |
| GB/T 20076-2006 |
Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds 摩托车和轻便摩托车发动机 最大扭矩和最大净功率测量方法 |
China National Standards mop |
English PDF |
| GB 20074-2006 |
External projections from motorcycles and mopeds 摩托车和轻便摩托车外部凸出物 |
China National Standards mop |
English PDF |
| GB 20073-2006 |
Performance and measurement method for braking of motorcycles and mopeds 摩托车和轻便摩托车 制动性能要求及试验方法 |
China National Standards mop |
English PDF |
| GB/T 19993-2005 |
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 |
China National Standards mop |
English PDF |
| GB/T 3402.1-2005 |
Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分：命名体系和规范基础 |
China National Standards mop |
English PDF |
| GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards mop |
English PDF |
| GB/T 20022-2005 |
Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards mop |
English PDF |
| GB 19758-2005 |
Limits and measurement methods for exhaust smoke emissions from motorcycles and mopeds 摩托车和轻便摩托车排气烟度排放限值及测量方法 |
China National Standards mop |
English PDF |
| GB 4569-2005 |
Limit and measurement method of noise emitted by stationary Motorcycles and mopeds 摩托车和轻便摩托车 定置噪声限值及测量方法 |
China National Standards mop |
English PDF |
| GB 16169-2005 |
Limit and measurement method of noise emitted by accelerating Motorcycles and mopeds 摩托车和轻便摩托车 加速行驶噪声限值及测量方法 |
China National Standards mop |
English PDF |
| GB 19482-2004 |
Safety property requirements and test method for fuel tanks of motorcycles and mopeds 摩托车和轻便摩托车燃油箱安全性能要求和试验方法 |
China National Standards mop |
English PDF |
| GB/T 9350-2003 |
Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract 塑料 氯乙烯均聚和共聚树脂水萃取液pH值的测定 |
China National Standards mop |
English PDF |
| GB/T 19280-2003 |
Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验) |
China National Standards mop |
English PDF |
| GB/T 19278-2003 |
General terms and their definitions of thermoplastic pipes，fittings and valves 热塑性塑料管材、管件及阀门通用术语及其定义 |
China National Standards mop |
English PDF |
| GB/T 19243-2003 |
Rubber，vulcanized or thermoplastic--Methods of test for staining in contact with organic material 硫化橡胶或热塑性橡胶与有机物接触污染的试验方法 |
China National Standards mop |
English PDF |
| GB/T 7755-2003 |
Rubber，vulcanized of thermoplastic--Determination of permeability to gases 硫化橡胶或热塑性橡胶 透气性的测定 |
China National Standards mop |
English PDF |
| GB 19152-2003 |
Photometric characteristics of moped headlamps 轻便摩托车前照灯配光性能 |
China National Standards mop |
English PDF |
| GB/T 9647-2003 |
Thermoplastics pipes--Determination of ringstiffness 热塑性塑料管材环刚度的测定 |
China National Standards mop |
English PDF |
| GB/T 8804.3-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材 |
China National Standards mop |
English PDF |
| GB/T 8804.2-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards mop |
English PDF |
| GB/T 8804.1-2003 |
Thermoplastic pipes--Determination of tensile properties--Part 1: General test method 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则 |
China National Standards mop |
English PDF |
| GB/T 6111-2003 |
Thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards mop |
English PDF |
| GB/T 18991-2003 |
Thermoplastics pipes and fittings forhot and cold water systems 冷热水系统用热塑性塑料管材和管件 |
China National Standards mop |
English PDF |
| GB/T 17037.4-2003 |
Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards mop |
English PDF |
| GB/T 17037.3-2003 |
Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards mop |
English PDF |
| GB/T 18954-2003 |
Chassis dynamometer setting for motorcycles and mopeds--Coastdown method 摩托车和轻便摩托车底盘测功机的设定 惯性滑行法 |
China National Standards mop |
English PDF |
| GB/T 7760-2003 |
Rubber，vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method 硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法 |
China National Standards mop |
English PDF |
| GB/T 18932.10-2002 |
Method for the determination of bromopropylate and 4，4’-dibromobenzophenoneresidues in honey--Gas chromatography/mass spectrometry 蜂蜜中溴螨酯、4，4’-二溴二苯甲酮残留量的测定方法 气相色谱/质谱法 |
China National Standards mop |
English PDF |
| GB/T 7139-2002 |
Plastics--Vinyl chloride homopolymers and copolymers--Determination of chlorine content 塑料 氯乙烯均聚物和共聚物 氯含量的测定 |
China National Standards mop |
English PDF |
| GB/T 3400-2002 |
Plastics--Homopolymer and copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature 塑料 通用型氯乙烯均聚和共聚树脂 室温下增塑剂吸收量的测定 |
China National Standards mop |
English PDF |
| GB/T 18743-2002 |
Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy method 流体输送用热塑性塑料管材简支梁冲击试验方法 |
China National Standards mop |
English PDF |
| GB/T 9349-2002 |
Determination of thermal stabitity of poly(vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds--Discoloration method 聚氯乙烯、相关含氯均聚物和共聚物及其共混物热稳定性的测定 变色法 |
China National Standards mop |
English PDF |
| GB/T 2917.1-2002 |
Determination of compounds and products based on vingl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevoted temperatures--Congo red method 以氯乙烯均聚和共聚物为主的共混物及制品在高温时放出氯化氢和任何其他酸性产物的测定 刚果红法 |
China National Standards mop |
English PDF |
| GB/T 8802-2001 |
Thermoplastics pipes and fitting--Determination of vicat softening temperature 热塑性塑料管材、管件 维卡软化温度的测定 |
China National Standards mop |
English PDF |
| GB/T 6671-2001 |
Thermoplastics pipes--Determination of longitudinal reversion 热塑性塑料管材 纵向回缩率的测定 |
China National Standards mop |
English PDF |
| GB/T 18475-2001 |
Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 |
China National Standards mop |
English PDF |
| GB/T 14152-2001 |
Thermoplastics pipes--Determination of resistance to external blows--Round-the-clock method 热塑性塑料管材耐外冲击性能试验方法 时针旋转法 |
China National Standards mop |
English PDF |
| GB/T 10798-2001 |
Thermoplastics pipes--Universal wall thickness table 热塑性塑料管材通用壁厚表 |
China National Standards mop |
English PDF |
| GB/T 6036-2001 |
Rubber，vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验) |
China National Standards mop |
English PDF |
| GB/T 2439-2001 |
Conducting and dissipative rubbers，vulcanized or thermoplastic--Measurement of resistivity 硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定 |
China National Standards mop |
English PDF |
| GB/T 12585-2001 |
Rubber，vulcanized or thermoplastic--Rubber sheet and rubber-coated fabric--Determination rate of volatile liquids(gravimetic technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定(质量法) |
China National Standards mop |
English PDF |
| GB/T 3682-2000 |
Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定 |
China National Standards mop |
English PDF |
| GB/T 1633-2000 |
Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) 热塑性塑料维卡软化温度(VST)的测定 |
China National Standards mop |
English PDF |
| GB/T 18042-2000 |
Thermoplastics pipes--Determination of creep ratio 热塑性塑料管材蠕变比率的试验方法 |
China National Standards mop |
English PDF |
| GB/T 6031-1998 |
Rubber，vulcanized or thermoplastic--Determination of hardness (hardness between 10IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶硬度的测定(10～100 IRHD) |
China National Standards mop |
English PDF |
| GB/T 17037.1-1997 |
Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards mop |
English PDF |
| GB/T 14377-1993 |
Water quality--Determination of triethylamine--Bromophenol blue spectrophotometric method 水质 三乙胺的测定 溴酚蓝分光光度法 |
China National Standards mop |
English PDF |
| GB/T 12006.4-1989 |
Polyamide homopolymers--Determination of matter extractable by boiling methanol 聚酰胺均聚物 沸腾甲醇可提取物测定方法 |
China National Standards mop |
English PDF |
| GB/T 223.42-1985 |
Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalumcontent 钢铁及合金化学分析方法 离子交换分离-溴邻苯三酚红光度法测定钽量 |
China National Standards mop |
English PDF |
| Find out:252Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
