Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43629.1-2023 |
Biotechnology Nucleic acid synthesis Part 1: Production and quality control requirements for synthetic oligonucleotides 生物技术 核酸合成 第1部分：合成寡核苷酸的生产和质量控制要求 |
China National Standards ol |
 English PDF |
| GB/T 43626-2023 |
Safety regulations for semi-integrated LED lamps with power supply voltage not greater than AC rms 50V or ripple-free DC 120V for general lighting 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯 安全规范 |
China National Standards ol |
English PDF |
| GB/T 43624-2023 |
wetland terminology 湿地术语 |
China National Standards ol |
English PDF |
| GB/T 43622-2023 |
Meteorological observation data aggregation metadata 气象观测资料汇交元数据 |
China National Standards ol |
English PDF |
| GB/T 43619-2023 |
Overpressure protection safety device Controlled safety pressure relief system 超压保护安全装置 受控安全泄压系统 |
China National Standards ol |
English PDF |
| GB/T 43609.1-2023 |
Building construction machinery and equipment Concrete and mortar preparation equipment Part 1: Terminology and commercial specifications 建筑施工机械与设备 混凝土及砂浆制备设备 第1部分：术语和商业规格 |
China National Standards ol |
English PDF |
| GB/T 43608.1-2023 |
Building construction machinery and equipment Concrete mixer trucks Part 1: Terminology and commercial specifications 建筑施工机械与设备 混凝土搅拌运输车 第1部分：术语和商业规格 |
China National Standards ol |
English PDF |
| GB/T 43607-2023 |
Palladium ingot analysis method Determination of silver, aluminum, gold, bismuth, chromium, copper, iron, iridium, magnesium, manganese, nickel, lead, platinum, rhodium, ruthenium, silicon, tin, zinc content Spark discharge atomic emission spectrometry 钯锭分析方法 银、铝、金、铋、铬、铜、铁、铱、镁、锰、镍、铅、铂、铑、钌、硅、锡、锌含量测定 火花放电原子发射光谱法 |
China National Standards ol |
English PDF |
| GB/T 43598-2023 |
Nanotechnology Determination of oxygen content and carbon-to-oxygen ratio of graphene powder X-ray photoelectron spectroscopy 纳米技术 石墨烯粉体氧含量和碳氧比的测定 X射线光电子能谱法 |
China National Standards ol |
English PDF |
| GB/T 43593-2023 |
Ferrite Cores Standard Inductance Factors and Tolerances for Air-Gapped Cores 铁氧体磁心 有气隙磁心的标准电感因数及其公差 |
China National Standards ol |
English PDF |
| GB/T 43590.102-2023 |
Laser display devices Part 1-2: Terminology and text symbols 激光显示器件 第1-2部分：术语及文字符号 |
China National Standards ol |
English PDF |
| GB/T 43589-2023 |
Gold alloy jewelry, multi-element content determination, laser ablation-inductively coupled plasma mass spectrometry 金合金饰品 多元素含量测定 激光剥蚀-电感耦合等离子体质谱法 |
China National Standards ol |
English PDF |
| GB/T 43587-2023 |
old people's shoes 老人鞋 |
China National Standards ol |
English PDF |
| GB/T 43586-2023 |
Polyolefin cold stretch casing film 聚烯烃冷拉伸套管膜 |
China National Standards ol |
English PDF |
| GB/T 43584.2-2023 |
Biotechnology Massively parallel sequencing Part 2: Quality assessment of sequencing data 生物技术 大规模并行测序 第2部分：测序数据的质量评估 |
China National Standards ol |
English PDF |
| GB/T 43582-2023 |
Blockchain and Distributed Accounting Technology Application Programming Interface Middleware Technology Guide 区块链和分布式记账技术 应用程序接口 中间件技术指南 |
China National Standards ol |
English PDF |
| GB/T 43580-2023 |
Blockchain and Distributed Accounting Technology General Service Guide for Certificate Deposits 区块链和分布式记账技术 存证通用服务指南 |
China National Standards ol |
English PDF |
| GB/T 43579-2023 |
Blockchain and distributed accounting technology Smart contract life cycle management technical specifications 区块链和分布式记账技术 智能合约生命周期管理技术规范 |
China National Standards ol |
English PDF |
| GB/T 43578-2023 |
Information security technology general cryptographic service interface specification 信息安全技术 通用密码服务接口规范 |
China National Standards ol |
English PDF |
| GB/T 43577.1-2023 |
Information Security Technology Electronic Discovery Part 1: Overview and Concepts 信息安全技术 电子发现 第1部分：概述和概念 |
China National Standards ol |
English PDF |
| GB/T 43575-2023 |
Blockchain and distributed accounting technology system testing specifications 区块链和分布式记账技术 系统测试规范 |
China National Standards ol |
English PDF |
| GB/T 43572-2023 |
Blockchain and Distributed Ledger Technology Terminology 区块链和分布式记账技术 术语 |
China National Standards ol |
English PDF |
| GB/T 43566-2023 |
Artificial grass surface football fields for primary and secondary schools 中小学人造草面层足球场地 |
China National Standards ol |
English PDF |
| GB/T 43565-2023 |
Synthetic surface basketball courts for primary and secondary schools 中小学合成材料面层篮球场地 |
China National Standards ol |
English PDF |
| GB/T 43564-2023 |
Primary and secondary school synthetic material surface track and field venues 中小学合成材料面层田径场地 |
China National Standards ol |
English PDF |
| GB/T 43559-2023 |
Propolis production technical specifications 蜂胶生产技术规范 |
China National Standards ol |
English PDF |
| GB/T 43557-2023 |
Information Security Technology Network Security Information Submission Guide 信息安全技术 网络安全信息报送指南 |
China National Standards ol |
English PDF |
| GB/T 43556.2-2023 |
Fiber Optic Cable Line Maintenance Technology Part 2: Underground Splice Box Water Leakage Monitoring Using Optical Monitoring System 光纤光缆线路维护技术 第2部分：使用光学监测系统的地埋接头盒浸水监测 |
China National Standards ol |
English PDF |
| GB/T 43556.1-2023 |
Fiber optic cable line maintenance technology Part 1: Fiber identification based on leaked light 光纤光缆线路维护技术 第1部分：基于泄漏光的光纤识别 |
China National Standards ol |
English PDF |
| GB/T 43552-2023 |
Comfort fans and their speed regulators for household and similar purposes - Performance test methods 家用和类似用途舒适风扇及其调速器 性能测试方法 |
China National Standards ol |
English PDF |
| GB/T 43549-2023 |
Footwear - Test methods for insoles - Static compression deformation 鞋类 鞋垫试验方法 静态压缩变形 |
China National Standards ol |
English PDF |
| GB/T 43541-2023 |
Intelligent manufacturing Network collaborative manufacturing Business architecture and information model 智能制造 网络协同制造 业务架构与信息模型 |
China National Standards ol |
English PDF |
| GB/T 43534-2023 |
Design and test method of AC side impedance of voltage source converter for high voltage direct current transmission 高压直流输电用电压源换流器交流侧阻抗设计及测试方法 |
China National Standards ol |
English PDF |
| GB/T 43532-2023 |
Nuclear power plant instrumentation and control system network security prevention and control 核电厂仪表和控制系统网络安全防范管控 |
China National Standards ol |
English PDF |
| GB/T 43529.5-2023 |
Standardizing the Registration and Delivery of Product Ontologies Using Spreadsheets Part 5: Activity Description Interface 利用电子表格标准化产品本体的注册和传递 第5部分：活动描述接口 |
China National Standards ol |
English PDF |
| GB/T 43529.3-2023 |
Standardizing the Registration and Delivery of Product Ontologies Using Spreadsheets Part 3: Common Information Model Interface 利用电子表格标准化产品本体的注册和传递 第3部分：公共信息模型接口 |
China National Standards ol |
English PDF |
| GB/T 43525-2023 |
Ships and offshore technology Navigation and ship maneuvering Electronic inclinometers 船舶与海上技术 导航和船舶操纵 电子倾斜仪 |
China National Standards ol |
English PDF |
| GB/T 43524.1-2023 |
Subsea equipment Part 1: Power connectors, penetrations and jumper assemblies for rated voltages 3 kV (Umax=3.6 kV) to 30 kV (Umax=36 kV) 水下设备 第1部分：额定电压3 kV（Umax＝3.6 kV）至30 kV（Umax＝36 kV）电源连接器、贯穿装置和跨接线组件 |
China National Standards ol |
English PDF |
| GB/T 43516-2023 |
Description of technological resource user needs 科技资源用户需求描述 |
China National Standards ol |
English PDF |
| GB/T 43513.1-2023 |
Technical specifications for space radiation biology experiments Part 1: General principles 空间辐射生物学实验技术规范 第1部分：总则 |
China National Standards ol |
English PDF |
| GB/T 43501-2023 |
Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships with specific characteristics 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards ol |
English PDF |
| GB/T 43497-2023 |
Electrodeposition layer and related finishing Electroless nickel phosphorus-ceramic composite coating 电沉积层及相关精饰 化学镀镍磷-陶瓷复合镀层 |
China National Standards ol |
English PDF |
| GB/T 43493.3-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 3: Photoluminescence detection method of defects 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第3部分：缺陷的光致发光检测方法 |
China National Standards ol |
English PDF |
| GB/T 43476-2023 |
Technical Guidelines for Aquatic Ecological Health Assessment 水生态健康评价技术指南 |
China National Standards ol |
English PDF |
| GB/T 43474-2023 |
Technical Guidelines for River Ecological Security Assessment 江河生态安全评估技术指南 |
China National Standards ol |
English PDF |
| GB/T 43466-2023 |
Information Technology Learning, Education and Training Guidelines for Assessment of Information Literacy of Primary and Secondary School Students 信息技术 学习、教育和培训 中小学生信息素养评价指南 |
China National Standards ol |
English PDF |
| GB/T 43463-2023 |
Microgrid group operation control requirements 微电网群运行控制要求 |
China National Standards ol |
English PDF |
| GB/T 43461-2023 |
Chain of Custody Common Terminology and Model 监管链 通用术语和模型 |
China National Standards ol |
English PDF |
| GB/T 43459-2023 |
Technical specifications for cell culture operations in clean rooms and controlled environments 洁净室及受控环境中细胞培养操作技术规范 |
China National Standards ol |
English PDF |
| GB/T 43428-2023 |
Digital analysis and network analysis in market, public opinion and social surveys Terminology and service requirements 市场、民意和社会调查中数字分析与网络分析 术语和服务要求 |
China National Standards ol |
English PDF |
| GB/T 39075.203-2023 |
Organic light-emitting diode (olED) light sources for general lighting Safety Part 2-3: Special requirements Flexible OLED light sheets and panels 普通照明用有机发光二极管（OLED）光源 安全 第2-3部分: 特殊要求 柔性OLED光片和面板 |
China National Standards ol |
English PDF |
| GB/T 39075.202-2023 |
Organic light-emitting diode (olED) light sources for general lighting Safety Part 2-2: Special requirements Integrated OLED modules 普通照明用有机发光二极管（OLED）光源 安全 第2-2部分：特殊要求 集成式OLED模块 |
China National Standards ol |
English PDF |
| GB/T 39075.201-2023 |
Organic light-emitting diode (olED) light sources for general lighting Safety Part 2-1: Special requirements Semi-integrated OLED modules 普通照明用有机发光二极管（OLED）光源 安全 第2-1部分：特殊要求 半集成式OLED模块 |
China National Standards ol |
English PDF |
| GB/T 39075.1-2023 |
Organic light-emitting diode (olED) light sources for general lighting - Safety Part 1: General requirements and tests 普通照明用有机发光二极管（OLED）光源 安全 第1部分：一般要求和试验 |
China National Standards ol |
English PDF |
| GB/T 37190-2023 |
General requirements for the entire life cycle of pipeline corrosion control projects 管道腐蚀控制工程全生命周期 通用要求 |
China National Standards ol |
English PDF |
| GB/T 37183-2023 |
Corrosion control project life cycle risk assessment 腐蚀控制工程全生命周期 风险评估 |
China National Standards ol |
English PDF |
| GB/T 35290-2023 |
Information Security Technology Radio Frequency Identification (RFID) System Security Technical Specifications 信息安全技术 射频识别（RFID）系统安全技术规范 |
China National Standards ol |
English PDF |
| GB/T 33314-2023 |
General requirements for the entire life cycle of corrosion control projects 腐蚀控制工程全生命周期 通用要求 |
China National Standards ol |
English PDF |
| GB/T 32440.1-2023 |
Footwear - Chemical test methods - Determination of phthalates - Part 1: Solvent extraction method 鞋类 化学试验方法 邻苯二甲酸酯的测定 第1部分：溶剂萃取法 |
China National Standards ol |
English PDF |
| GB/T 32151.14-2023 |
Carbon emission accounting and reporting requirements Part 14: Other non-ferrous metal smelting and rolling processing enterprises 碳排放核算与报告要求 第14部分：其他有色金属冶炼和压延加工企业 |
China National Standards ol |
English PDF |
| GB/T 30420.3-2023 |
Sewing Machinery Terminology Part 3: Spreading and Cutting Equipment Terminology 缝制机械术语 第3部分: 铺布裁剪设备术语 |
China National Standards ol |
English PDF |
| GB/T 29627.3-2023 |
Polyaramid fiber paperboard for electrical applications Part 3: Individual material specifications 电气用聚芳酰胺纤维纸板 第3部分：单项材料规范 |
China National Standards ol |
English PDF |
| GB/T 29246-2023 |
Information Security Technology Information Security Management System Overview and Glossary 信息安全技术 信息安全管理体系 概述和词汇 |
China National Standards ol |
English PDF |
| GB/T 28819-2023 |
Aluminum alloy housing for inflatable high-voltage switchgear 充气高压开关设备用铝合金外壳 |
China National Standards ol |
English PDF |
| GB/T 28511.2-2023 |
Planar optical waveguide integrated optical circuit devices Part 2: Dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology 平面光波导集成光路器件 第2部分：基于阵列波导光栅（AWG）技术的密集波分复用（DWDM）滤波器 |
China National Standards ol |
English PDF |
| GB/T 27917.1-2023 |
Courier Services Part 1: Basic Terminology 快递服务 第1部分：基本术语 |
China National Standards ol |
English PDF |
| GB/T 26316-2023 |
Market, opinion and social research (including insights and data analysis) Terminology and service requirements 市场、民意和社会调查（包括洞察与数据分析） 术语和服务要求 |
China National Standards ol |
English PDF |
| GB/T 25022.3-2023 |
Rail transit rolling stock electrical connectors Part 3: Communication control connectors 轨道交通 机车车辆电连接器 第3部分：通信控制连接器 |
China National Standards ol |
English PDF |
| GB/T 24933-2023 |
ATV warning symbols 全地形车警示符号 |
China National Standards ol |
English PDF |
| GB/T 24609-2023 |
Rolling bearing rated thermal speed calculation method 滚动轴承 额定热转速 计算方法 |
China National Standards ol |
English PDF |
| GB/T 24608-2023 |
Inspection rules for rolling bearings and their commercial parts 滚动轴承及其商品零件检验规则 |
China National Standards ol |
English PDF |
| GB/T 24607-2023 |
Rolling bearing life reliability test and evaluation method 滚动轴承 寿命可靠性试验及评定方法 |
China National Standards ol |
English PDF |
| GB/T 23307-2023 |
Floor sockets for household and similar purposes 家用和类似用途地面插座 |
China National Standards ol |
English PDF |
| GB/T 23031.4-2023 |
Industrial Internet Platform Application Implementation Guide Part 4: Networked Collaboration 工业互联网平台 应用实施指南 第4部分：网络化协同 |
China National Standards ol |
English PDF |
| GB/T 22389-2023 |
Gapless metal oxide arrester for high voltage DC converter station 高压直流换流站无间隙金属氧化物避雷器 |
China National Standards ol |
English PDF |
| GB/T 20818.22-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 22: List of properties (LOPs) for electronic data exchange of valve body assemblies 工业过程测量和控制 过程设备目录中的数据结构和元素 第22部分：阀体总成电子数据交换用属性列表(LOPs) |
China National Standards ol |
English PDF |
| GB/T 20818.16-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 16: List of properties (LOPs) for electronic data exchange of density measuring equipment 工业过程测量和控制 过程设备目录中的数据结构和元素 第16部分：密度测量设备电子数据交换用属性列表(LOPs) |
China National Standards ol |
English PDF |
| GB/T 20317-2023 |
Melt extrusion deposition forming machine tool accuracy inspection 熔融挤出沉积成形机床 精度检验 |
China National Standards ol |
English PDF |
| GB/T 20186.3-2023 |
Secondary coating materials for optical fibers Part 3: Modified polycarbonate 光纤用二次被覆材料 第3部分：改性聚碳酸酯 |
China National Standards ol |
English PDF |
| GB/T 19510.213-2023 |
Light source control devices Part 2-13: Special requirements for DC or AC electronic control devices for LED modules 光源控制装置 第2-13部分：LED模块用直流或交流电子控制装置的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.212-2023 |
Light source control devices Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (other than fluorescent lamps) 光源控制装置 第2-12部分：放电灯（荧光灯除外）用直流或交流电子镇流器的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.211-2023 |
Light source control devices Part 2-11: Special requirements for miscellaneous electronic circuits used in conjunction with luminaires 光源控制装置 第2-11部分：与灯具联用的杂类电子线路的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.209-2023 |
Light source control devices Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (other than fluorescent lamps) 光源控制装置 第2-9部分：放电灯（荧光灯除外）用电磁控制装置的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.208-2023 |
Light source control devices Part 2-8: Special requirements for ballasts for fluorescent lamps 光源控制装置 第2-8部分：荧光灯用镇流器的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.207-2023 |
Light source control devices Part 2-7: Special requirements for electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained) 光源控制装置 第2-7部分：应急照明（自容式）用安全服务电源（ESSS）供电电子控制装置的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.203-2023 |
Light source control devices Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps 光源控制装置 第2-3部分：荧光灯用交流和/或直流电子控制装置的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.202-2023 |
Light source control devices Part 2-2: Special requirements for DC/AC electronic step-down converters for tungsten lamps 光源控制装置 第2-2部分：钨丝灯用直流/交流电子降压转换器的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.201-2023 |
Light source control devices Part 2-1: Special requirements for starting devices (other than glow starters) 光源控制装置 第2-1部分: 启动装置(辉光启动器除外)的特殊要求 |
China National Standards ol |
English PDF |
| GB/T 19510.1-2023 |
Light source control devices Part 1: General and safety requirements 光源控制装置 第 1 部分:一般要求和安全要求 |
China National Standards ol |
English PDF |
| GB/T 17626.39-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 39: Close range radiated field immunity test 电磁兼容 试验和测量技术 第39部分：近距离辐射场抗扰度试验 |
China National Standards ol |
English PDF |
| GB/T 17626.30-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 30: Power quality measurement methods 电磁兼容 试验和测量技术 第30部分：电能质量测量方法 |
China National Standards ol |
English PDF |
| GB/T 17626.3-2023 |
Electromagnetic compatibility Testing and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test 电磁兼容 试验和测量技术 第3部分：射频电磁场辐射抗扰度试验 |
China National Standards ol |
English PDF |
| GB/T 16462.2-2023 |
Inspection conditions for CNC lathes and turning centers Part 2: Inspection of geometric accuracy of vertical machine tools 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 |
China National Standards ol |
English PDF |
| GB/T 16462.1-2023 |
Inspection conditions for CNC lathes and turning centers Part 1: Inspection of geometric accuracy of horizontal machine tools 数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验 |
China National Standards ol |
English PDF |
| GB/T 15035-2023 |
wood drying terminology 木材干燥术语 |
China National Standards ol |
English PDF |
| GB/T 15022.10-2023 |
Resin-based reactive compounds for electrical insulation Part 10: Polyesterimide resin compounds 电气绝缘用树脂基活性复合物 第10部分：聚酯亚胺树脂复合物 |
China National Standards ol |
English PDF |
| GB/T 14196.2-2023 |
Incandescent lamps - Safety regulations - Part 2: Tungsten halogen lamps for general lighting in households and similar places 白炽灯 安全规范 第2部分：家庭和类似场合普通照明用卤钨灯 |
China National Standards ol |
English PDF |
| GB/T 13631-2023 |
Design criteria for auxiliary control rooms in nuclear power plants 核电厂辅助控制室设计准则 |
China National Standards ol |
English PDF |
| GB/Z 41275.23-2023 |
Avionics Process Management Aerospace and Defense Electronic Systems Containing Lead-Free Solder Part 23: Rework/Repair Guidelines for Lead-Free and Mixed Electronics 航空电子过程管理 含无铅焊料航空航天及国防电子系统 第23部分：无铅及混装电子产品返工/修复指南 |
China National Standards ol |
English PDF |
| GB/Z 41275.22-2023 |
Avionics Process Management Aerospace and Defense Electronic Systems Containing Lead-Free Solders Part 22: Technical Guide 航空电子过程管理 含无铅焊料航空航天及国防电子系统 第22部分：技术指南 |
China National Standards ol |
English PDF |
| Find out:14993Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 |
+86-755-25831330
