GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2423.48-2008 |
Environmental testing for electric and electronic products - Part 2:Test methods - Test Ff: Vibration- Time-history method 电工电子产品环境试验 第2部分:试验方法 试验Ff:振动-时间历程法 |
China National Standards on |
English PDF |
GB/T 2423.39-2008 |
Environmental testing for electric and electronic products - Part 2: Tests - Test Ee: Bounce 电工电子产品环境试验 第2部分:试验方法 试验Ee:弹跳 |
China National Standards on |
English PDF |
GB/T 2423.38-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test R: Water test method and guidance 电工电子产品环境试验 第2部分:试验方法 试验R:水试验方法和导则 |
China National Standards on |
English PDF |
GB/T 18873-2008 |
General guide of transmission electron microscope (TEM)- X-ray energy dispersive spectrometry(EDS) quantitative microanalysis for thin biological specimens 生物薄试样的透射电子显微镜-X射线能谱定量分析通则 |
China National Standards on |
English PDF |
GB/T 17507-2008 |
General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope 透射电子显微镜X射线能谱分析生物薄标样的通用技术条件 |
China National Standards on |
English PDF |
GB/T 17506-2008 |
The analysis method of corrosive layer on ferrous metals of ship with EPMA 船舶黑色金属腐蚀层的电子探针分析方法 |
China National Standards on |
English PDF |
GB/T 17360-2008 |
Quantitative analysis method of low content Si and Mn in steel with electron probe microanalysis 钢中低含量Si、Mn的电子探针定量分析方法 |
China National Standards on |
English PDF |
GB/T 15965-2008 |
Hand-made carpets - Determination of length of Pile 手工地毯 绒头长度的测定方法 |
China National Standards on |
English PDF |
GB/T 15964-2008 |
Carpets - Determination of number of tufts or loops per unit lenght and per unit area 地毯 单位长度和单位面积绒簇或绒圈数目的测定方法 |
China National Standards on |
English PDF |
GB 4706.87-2008 |
Safety of household and similar electrical appliances - Particular requirements for spray extraction appliances,for industrial and commercial use 家用和类似用途电器的安全 工业和商用喷雾抽吸器具的特殊要求 |
China National Standards on |
English PDF |
GB 21966-2008 |
Safety of primary and secondary lithium cells and batteries during transport 锂原电池和蓄电池在运输中的安全要求 |
China National Standards on |
English PDF |
GB 16843-2008 |
Single-capped fluorescent lamps - Safety specifications 单端荧光灯的安全要求 |
China National Standards on |
English PDF |
GB 14196.3-2008 |
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) 白炽灯 安全要求 第3部分:卤钨灯(非机动车辆用) |
China National Standards on |
English PDF |
GB/T 9651-2008 |
Test procedures for single-phase induction motor 单相异步电动机试验方法 |
China National Standards on |
English PDF |
GB/T 4997-2008 |
General specification for permanent magnet low speed direct current tachogenerator 永磁式低速直流测速发电机通用技术条件 |
China National Standards on |
English PDF |
GB/T 4712-2008 |
Automatic diesel generating set,requirements of classification for 自动化柴油发电机组分级要求 |
China National Standards on |
English PDF |
GB/T 21975-2008 |
Method of test for reliability of three-phase induction motors for crane and metallurgical application 起重及冶金用三相异步电动机可靠性试验方法 |
China National Standards on |
English PDF |
GB/T 21974-2008 |
Technical specification for YZRW range of eddy-current braking wound-rotor three-phase induction motors for crane and metallurgical application YZRW系列起重及冶金用涡流制动绕线转子三相异步电动机技术条件 |
China National Standards on |
English PDF |
GB/T 21973-2008 |
Technical specification for YZR3 range of wound-rotor three-phase induction motors for crane & metallurgical applications YZR3系列起重及冶金用绕线转子三相异步电动机技术条件 |
China National Standards on |
English PDF |
GB/T 21972.1-2008 |
Technical specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical application - Part 1:YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applicati 起重及冶金用变频调速三相异步电动机技术条件 第1部分:YZP系列起重及冶金用变频调速三相异步电动机 |
China National Standards on |
English PDF |
GB/T 21971-2008 |
Technical specification for YZD range of multi-speed three-phase induction motors for crane application YZD系列起重用多速三相异步电动机技术条件 |
China National Standards on |
English PDF |
GB/T 21969-2008 |
Technical specification for YGP series variable-frequency adjustable-speed shree-phase induction motors for roll table application YGP系列辊道用变频调速三相异步电动机技术条件 |
China National Standards on |
English PDF |
GB/T 21968-2008 |
Technical specification for YBZS range of flame-proof double-speed three-phase induction motors for crane application YBZS系列起重用隔爆型双速三相异步电动机技术条件 |
China National Standards on |
English PDF |
GB/T 21967-2008 |
YBZE、YBZSE Range three-phase induction motors for crane application flameproof electromagnetic braking technical specifications YBZE、YBZSE系列起重用隔爆型电磁制动三相异步电动机技术条件 |
China National Standards on |
English PDF |
GB/T 14819-2008 |
General specification for wound field DC servomotors 电磁式直流伺服电动机通用技术条件 |
China National Standards on |
English PDF |
GB/T 14818-2008 |
General specification for DC servomotors with wounded disc armature 线绕盘式直流伺服电动机通用技术条件 |
China National Standards on |
English PDF |
GB/T 14817-2008 |
General specification for permanent magnet DC servomotors 永磁式直流伺服电动机通用技术条件 |
China National Standards on |
English PDF |
GB/T 13958-2008 |
Test procedures for non-direct current excitation winding synchronous motor 无直流励磁绕组同步电动机试验方法 |
China National Standards on |
English PDF |
GB/T 13139-2008 |
General specification for hysteresis synchronous motors 磁滞同步电动机通用技术条件 |
China National Standards on |
English PDF |
GB/T 12665-2008 |
Requirements of damp-heat testing of electrical machine for service in general environmental condition 电机在一般环境条件下使用的湿热试验要求 |
China National Standards on |
English PDF |
GB/T 12351-2008 |
Environmental technical requirements of rotating electric machines for tropical use 热带型旋转电机环境技术要求 |
China National Standards on |
English PDF |
GB/T 10401-2008 |
Permanent magnet direct current torque motors,General specification for 永磁式直流力矩电动机通用技术条件 |
China National Standards on |
English PDF |
GB 16006-2008 |
Criteria for elimination of iodine deficiency disorders 碘缺乏病消除标准 |
China National Standards on |
English PDF |
GB/T 21970-2008 |
Water quality - Determiniation of putrescine,cadaverine, spermidine,spermine and histamine - High performance liquid chromatography method 水质 组胺等五种生物胺的测定 高效液相色谱法 |
China National Standards on |
English PDF |
GB/T 8169-2008 |
Testing method of vibration transmissibility for packaging cushioning materials 包装用缓冲材料振动传递特性试验方法 |
China National Standards on |
English PDF |
GB/T 8168-2008 |
Testing method of static compression for packaging cushioning materials 包装用缓冲材料静态压缩试验方法 |
China National Standards on |
English PDF |
GB/T 21964-2008 |
Repair of agricultural machines - Safety regulations 农业机械修理 安全规范 |
China National Standards on |
English PDF |
GB/T 14248-2008 |
Determination of braking performance for harvesting machinery 收获机械 制动性能测定方法 |
China National Standards on |
English PDF |
GB/T 8005.3-2008 |
Aluminium of aluminium alloys-Terms and difinitions - Part 3:Surface treatment terms 铝及铝合金术语 第3部分:表面处理 |
China National Standards on |
English PDF |
GB/T 8005.1-2008 |
Aluminium and aluminium alloys-Terms and definitions - Part 1:product and method of processing and treatment 铝及铝合金术语 第1部分:产品及加工处理工艺 |
China National Standards on |
English PDF |
GB/T 5168-2008 |
Microstructure and macrostructure examination for α-β titanium alloys α-β钛合金高低倍组织检验方法 |
China National Standards on |
English PDF |
GB/T 4324.8-2008 |
Methods for chemical analysis of tungsten - Determination of nickel content - The inductively coupled plasma atomic emission spectrometry 、 flame atomic absorption spectrometry and dimethylglyoxime gravimetry 钨化学分析方法 镍量的测定 电感耦合等离子体原子发射光谱法、火焰原子吸收光谱法和丁二酮肟重量法 |
China National Standards on |
English PDF |
GB/T 4324.15-2008 |
Methods for chemical analysis of tungsten - Determination of magnesium content - The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry 钨化学分析方法 镁量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法 |
China National Standards on |
English PDF |
GB/T 4324.13-2008 |
Methods for chemical analysis of tungsten - Determination of calcium content - The inductively coupled plasma atomic emission spectrometry 钨化学分析方法 钙量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards on |
English PDF |
GB/T 3651-2008 |
Measuring method for thermal conductivity of metal at high temperature 金属高温导热系数测量方法 |
China National Standards on |
English PDF |
GB/T 21994.8-2008 |
Chemical analysis of magnesium fluoride - Part 8: Determination of sulphate content - Barium sulphate gravimetric method 氟化镁化学分析方法 第8部分:硫酸根含量的测定 硫酸钡重量法 |
China National Standards on |
English PDF |
GB/T 21994.7-2008 |
Chemical analysis of magnesium fluoride - Part 7: Determination of iron content - Orthophenantholine photometric method 氟化镁化学分析方法 第7部分:三氧化二铁含量的测定 邻二氮杂菲分光光度法 |
China National Standards on |
English PDF |
GB/T 21994.6-2008 |
Chemical analysis of magnesium fluoride - Part 6: Determination of silica content - Molybdenum blue photometric method 氟化镁化学分析方法 第6部分:二氧化硅含量的测定 钼蓝分光光度法 |
China National Standards on |
English PDF |
GB/T 21994.5-2008 |
Chemical analysis of magnesium fluoride - Part 5: Determiantion of calcium content - Method of flame atomic absorption spectrometry 氟化镁化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法 |
China National Standards on |
English PDF |
GB/T 21994.4-2008 |
Chemical analysis of magnesium fluoride - Part 4: Determination of magnesium - EDTA volumetric method 氟化镁化学分析方法 第4部分:镁含量的测定 EDTA容量法 |
China National Standards on |
English PDF |
GB/T 21994.3-2008 |
Chemical analysis of magnesium fluoride - Part 3: Determination of fluoride content - Distillation-thorium nitrate titration volumetric method 氟化镁化学分析方法 第3部分:氟含量的测定 蒸馏-硝酸钍容量法 |
China National Standards on |
English PDF |
GB/T 21994.2-2008 |
Chemical analysis of magnesium fluoride - Part 2: Determination of moisture content - Gravimetric method 氟化镁化学分析方法 第2部分:湿存水含量的测定 重量法 |
China National Standards on |
English PDF |
GB/T 21994.1-2008 |
Chemical analysis of magnesium fluoride - Part 1: Preparation and storage of test samples 氟化镁化学分析方法 第1部分:试样的制备和贮存 |
China National Standards on |
English PDF |
GB/T 20975.25-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 25:Inductively coupled plasma atomic emission spectrometric method 铝及铝合金化学分析方法 第25部分:电感耦合等离子体原子发射光谱法 |
China National Standards on |
English PDF |
GB/T 20255.6-2008 |
Methods for chemical analysis of hardmetals - Flame atomic absorption spectrometry - General requirements 硬质合金化学分析方法 火焰原子吸收光谱法 一般要求 |
China National Standards on |
English PDF |
GB/T 12967.6-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method 铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量 |
China National Standards on |
English PDF |
GB/T 12967.3-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 3 : Copper accelerated acetic acid salt spray test(CASS test) 铝及铝合金阳极氧化膜检测方法 第3部分:铜加速乙酸盐雾试验(CASS试验) |
China National Standards on |
English PDF |
GB/T 12967.2-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus 铝及铝合金阳极氧化膜检测方法 第2部分:用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数 |
China National Standards on |
English PDF |
GB/T 12967.1-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus 铝及铝合金阳极氧化膜检测方法 第1部分:用喷磨试验仪测定阳极氧化膜的平均耐磨性 |
China National Standards on |
English PDF |
GB/T 11102-2008 |
Cemented carbide products for geological exploration drilling tools 地质勘探工具用硬质合金制品 |
China National Standards on |
English PDF |
GB/T 11066.5-2008 |
Methods for chemical analysis of gold - Determination of silver,copper,iron,lead,antimony and bismuth contents - Atomic emission spectrometry 金化学分析方法 银、铜、铁、铅、锑和铋量的测定 原子发射光谱法 |
China National Standards on |
English PDF |
GB/T 11066.4-2008 |
Methods for chemical analysis of gold - Determination of copper, lead and bismuth contents - Flame atomic absorption spectrometry 金化学分析方法 铜、铅和铋量的测定 火焰原子吸收光谱法 |
China National Standards on |
English PDF |
GB/T 11066.3-2008 |
Methods for chemical analysis of gold - Determination of iron content - Flame atomic absorption spectrometry 金化学分析方法 铁量的测定 火焰原子吸收光谱法 |
China National Standards on |
English PDF |
GB/T 11066.2-2008 |
Methods for chemical analysis of gold - Determination of silver content - Flame atomic absorption spectrometry 金化学分析方法 银量的测定 火焰原子吸收光谱法 |
China National Standards on |
English PDF |
GB/T 11066.1-2008 |
Methods for chemical analysis of gold - Determination of gold content - Fire assaying method 金化学分析方法 金量的测定 火试金法 |
China National Standards on |
English PDF |
GB/T 6110-2008 |
Carbide dies for drawing - Types and dimensions 硬质合金拉制模 型式和尺寸 |
China National Standards on |
English PDF |
GB/T 11880-2008 |
Specification of large die-blocks used for die-forging hammer and mechanical forging press 模锻锤和大型机械锻压机用模块技术条件 |
China National Standards on |
English PDF |
GB/T 21982-2008 |
Determination of residues of zearalanol, β-zearalanol, α-zearalenol, β-zearalenol, zearalanone and zearalenone in foodstuffs of animal origin - LC-MS/MS method 动物源食品中玉米赤霉醇、β-玉米赤霉醇、α-玉米赤霉烯醇、β-玉米赤霉烯醇、玉米赤霉酮和玉米赤霉烯酮残留量检测方法 液相色谱-质谱/质谱法 |
China National Standards on |
English PDF |
GB/T 21981-2008 |
Determination of hormone multiresidues in foodstuffs of animal origin - LC-MS/MS method 动物源食品中激素多残留检测方法 液相色谱-质谱/质谱法 |
China National Standards on |
English PDF |
GB/T 9870.2-2008 |
Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies 硫化橡胶或热塑性橡胶动态性能的测定 第2部分:低频扭摆法 |
China National Standards on |
English PDF |
GB/T 9768-2008 |
Regulation of application and maintenance of tyre 轮胎使用与保养规程 |
China National Standards on |
English PDF |
GB/T 9751.1-2008 |
Paints and varnishes - Determination of viscosity using rotary viscometers - Part1:Cone-and-plate viscometer operated at a high rate of shear 色漆和清漆 用旋转黏度计测定黏度 第1部分:以高剪切速率操作的锥板黏度计 |
China National Standards on |
English PDF |
GB/T 9267-2008 |
Emulsions for coatings and polymer dispersions for coatings and plastics - Determination of white point temperature and minimum film-forming temperature 涂料用乳液和涂料、塑料用聚合物分散体 白点温度和最低成膜温度的测定 |
China National Standards on |
English PDF |
GB/T 8296-2008 |
Raw natural rubber and rubber latices - Determination of manganese content - Sodium periodate photmetric methods 天然生胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards on |
English PDF |
GB/T 8295-2008 |
Natural Rubber and latex - Determination of copper content - Photometric method 天然橡胶和胶乳 铜含量的测定 光度法 |
China National Standards on |
English PDF |
GB/T 8291-2008 |
Natural rubber latex concentrate - Determination of coagulum content (sieve residue) 浓缩天然胶乳 凝块含量(筛余物)的测定 |
China National Standards on |
English PDF |
GB/T 8290-2008 |
Natural rubber latex concentrate - Sampling 浓缩天然胶乳 取样 |
China National Standards on |
English PDF |
GB/T 8081-2008 |
Rubber, raw natural - Guidelines for the specification of technically specified rubber(TSR) 天然生胶 技术分级橡胶(TSR)规格导则 |
China National Standards on |
English PDF |
GB/T 7531-2008 |
Determination of ignition residue for organic chemical products 有机化工产品灼烧残渣的测定 |
China National Standards on |
English PDF |
GB/T 9275-2008 |
Paint and varnishes - Buchholz indentation test 色漆和清漆 巴克霍尔兹压痕试验 |
China National Standards on |
English PDF |
GB/T 7124-2008 |
Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies 胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料) |
China National Standards on |
English PDF |
GB/T 6744-2008 |
Binders for paints and varnishes - Determination of saponification value - Titrmetric method 色漆和清漆用漆基 皂化值的测定 滴定法 |
China National Standards on |
English PDF |
GB/T 6743-2008 |
Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 |
China National Standards on |
English PDF |
GB/T 6488-2008 |
Liquid chemicals - Determination of refrative index at 20℃ 液体化工产品 折光率的测定(20℃) |
China National Standards on |
English PDF |
GB/T 6324.5-2008 |
Test method of organic chemical products - Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals 有机化工产品试验方法 第5部分:有机化工产品中羰基化合物含量的测定 |
China National Standards on |
English PDF |
GB/T 5832.2-2008 |
Determination of moisture in gases - Part 2:Dew point method 气体中微量水分的测定 第2部分:露点法 |
China National Standards on |
English PDF |
GB/T 533-2008 |
Rubber,vulcanized or thermoplastic - Determination of density 硫化橡胶或热塑性橡胶 密度的测定 |
China National Standards on |
English PDF |
GB/T 532-2008 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定 |
China National Standards on |
English PDF |
GB/T 531.1-2008 |
Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) |
China National Standards on |
English PDF |
GB/T 529-2008 |
Rubber,vulcanized or thermoplastic - Determination of tear strength(Trouser,angle and crescent test pieces) 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) |
China National Standards on |
English PDF |
GB/T 5211.5-2008 |
Method for the determination of resistance to materials of pigments 颜料耐性测定法 |
China National Standards on |
English PDF |
GB/T 5211.11-2008 |
Determination of water-soluble sulfates, chlorides and nitrates of pigments 颜料水溶硫酸盐、氯化物和硝酸盐的测定 |
China National Standards on |
English PDF |
GB/T 5208-2008 |
Determination of flash point - Rapid equilibrium closed cup method 闪点的测定 快速平衡闭杯法 |
China National Standards on |
English PDF |
GB/T 4611-2008 |
Determination method of "fish eyes"for polyvinyl chloride resins of general use 通用型聚氯乙烯树脂“鱼眼”的测定方法 |
China National Standards on |
English PDF |
GB/T 2977-2008 |
Size designation,dimensions,inflation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards on |
English PDF |
GB/T 21993-2008 |
Polyvinyl chloride resins - Determination of the content of methanol or ethanol extract 聚氯乙烯树脂 甲醇或乙醇萃取物含量的测定 |
China National Standards on |
English PDF |
GB/T 21992-2008 |
Polyvinyl chloride resins for Paste - Determination of number of impurities particles and foreign particles 糊用聚氯乙烯树脂 杂质与外来粒子数的测定 |
China National Standards on |
English PDF |
GB/T 21991-2008 |
Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method 塑料 试验用聚氯乙烯(PVC)糊的制备 行星混合器法 |
China National Standards on |
English PDF |
GB/T 21990-2008 |
Polyvinyl chloride (PVC) pastes - Determination of fineness of grind 聚氯乙烯(PVC)糊 刮板细度的测定 |
China National Standards on |
English PDF |
GB/T 21989-2008 |
Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 |
China National Standards on |
English PDF |
Find out:38906Items | To Page of: First -Previous-Next -Last | [288] [289] [290] [291] [292] [293] [294] |