China or GB Standards English PDF List

GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.

China "or" GB Standards English PDF List:

Standard Code	Standard Title	Standard Class	Order
GB/T 14348-2007	hobs for double-circular-arc gear 双圆弧齿轮滚刀	China National Standards or	English PDF
GB/T 9086-2007	The white standard plate for colorimetry and photometry 用于色度和光度测量的标准白板	China National Standards or	English PDF
GB 20998-2007	Limits and measurement methods for evaporative pollutants from motorcycles and mopeds 摩托车和轻便摩托车燃油蒸发污染物排放限值及测量方法	China National Standards or	English PDF
GB 20997-2007	Limits of fuel consumption for light duty commercial vehicles 轻型商用车辆燃料消耗量限值	China National Standards or	English PDF
GB 13094-2007	The safety requiements for bus construction 客车结构安全要求	China National Standards or	English PDF
GB 21008-2007	Aerial ropeways for underground mine - Safety requirements 地下矿用架空索道安全要求	China National Standards or	English PDF
GB/T 6300-2007	Regulations for submission of the ship’s finished documents 提交船舶产品完工文件的规定	China National Standards or	English PDF
GB/T 20897.2-2007	Inflatable boats - Part 2: Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive 充气艇第2部分: 发动机最大额定功率为4.5kW～15kW的艇	China National Standards or	English PDF
GB/T 14527-2007	Compound damping isolator and compound damper 复合阻尼隔振器和复合阻尼器	China National Standards or	English PDF
GB/T 13342-2007	Specification for marine reciprocating hydraulic cylinder 船用往复式液压缸通用技术条件	China National Standards or	English PDF
GB/T 11869-2007	Towing winches for deep sea use 远洋船用拖曳绞车	China National Standards or	English PDF
GB/T 11144-2007	Standard test method for measurement of extreme-perssure prosperties of lubricating fluids - Timken method 润滑液极压性能测定法梯姆肯法	China National Standards or	English PDF
GB/T 4798.7-2007	Environmental conditions existing in the application of electric and electronic products - Section 7: Portable and non-stationary use 电工电子产品应用环境条件第7部分：携带和非固定使用	China National Standards or	English PDF
GB/T 13182-2007	Thallium-actived sodium iodide scintillator and scintillation detectors of sodium iodide(thallium) 碘化钠（铊）闪烁体和碘化钠（铊）闪烁探测器	China National Standards or	English PDF
GB 2585-2007	Hot-rolled steel rails for railway 铁路用热轧钢轨	China National Standards or	English PDF
GB/T 20982.3-2007	Textile machinery and accessories - Weaving machines - Part 3: Parts of the machine - Vocabulary 纺织机械与附件织机第3部分：织机零部件词汇	China National Standards or	English PDF
GB/T 20982.2-2007	Textile machinery and accessories - Weaving machines - Part 2: Accessories - Vocabulary 纺织机械与附件织机第2部分：附件词汇	China National Standards or	English PDF
GB 9706.6-2007	Medical electrical equipment - Part 2：Particular requirements for the safety of microwave therapy equipment 医用电气设备第二部分：微波治疗设备安全专用要求	China National Standards or	English PDF
GB 9706.1-2007	Medical electrical equipment - Part 1:General requirements for safety 医用电气设备第1部分：安全通用要求	China National Standards or	English PDF
GB 17201-2007	Combined instrument transformers 组合互感器	China National Standards or	English PDF
GB 10230.1-2007	Tap-changers - Part 1: Performance requirements and test methods 分接开关第1部分：性能要求和试验方法	China National Standards or	English PDF
GB/T 5332-2007	Method of test for ignition temperature of flammable liquids and gases 可燃液体和气体引燃温度试验方法	China National Standards or	English PDF
GB/T 20966-2007	Determination of particle size distribution for colliery powders 煤矿粉尘粒度分布测定方法	China National Standards or	English PDF
GB/T 18294.4-2007	Technical identification method for fire - Part 4: High performance liquid chromatography analysis 火灾技术鉴定方法第4部分：高效液相色谱法	China National Standards or	English PDF
GB/T 16172-2007	Test method for heat release rate of building materials 建筑材料热释放速率试验方法	China National Standards or	English PDF
GB/T 20485.21-2007	Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer 振动与冲击传感器校准方法第21部分：振动比较法校准	China National Standards or	English PDF
GB/T 20485.13-2007	Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration by laser interferometry 振动与冲击传感器校准方法第13部分: 激光干涉法冲击绝对校准	China National Standards or	English PDF
GB/T 21028-2007	Information security technology - Security techniques requirement for server 信息安全技术服务器安全技术要求	China National Standards or	English PDF
GB/T 21042-2007	Fixed capacitors for use in electronic equipment - Part 22: Sectional specification:Fixed surface mount multilayer capacitors of ceramic dielectric,class 2 电子设备用固定电容器第22部分: 分规范表面安装用2类多层瓷介固定电容器	China National Standards or	English PDF
GB/T 21041-2007	Fixed capacitors for use in eiectronic equipment - Part 21: Sectional specification: Fixed sutface mount multilayer capacitors of ceramic dielectric,class 1 电子设备用固定电容器第21部分: 分规范表面安装用1类多层瓷介固定电容器	China National Standards or	English PDF
GB/T 21040-2007	Fixed capacitors for in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multiplayer capacitors of ceramic dielectric,class2 - Assessment level EZ 电子设备用固定电容器第22-1部分: 空白详细规范表面安装用2类多层瓷介固定电容器评定水平 EZ	China National Standards or	English PDF
GB/T 21039.1-2007	Semiconductor devices - Discrete devices - Part 4-1: Microwave diodes and transistors - Microwave field effect transistors - Blank detail specification 半导体器件分立器件第4-1部分：微波二极管和晶体管微波场效应晶体管空白详细规范	China National Standards or	English PDF
GB/T 21038-2007	Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric,class 1 - Assessment level EZ 电子设备用固定电容器第21-1部分：空白详细规范表面安装用1类多层瓷介固定电容器评定水平 EZ	China National Standards or	English PDF
GB/T 21026-2007	Specification for Chinese office software application programming interface 中文办公软件应用编程接口规范	China National Standards or	English PDF
GB/T 21023-2007	General specification for Chinese speech recognition system 中文语音识别系统通用技术规范	China National Standards or	English PDF
GB/T 21022.1-2007	Fibre optic connector interfaces - Part 1: General and guidance 纤维光学连接器接口第1部分: 总则和导则	China National Standards or	English PDF
GB/T 21021-2007	RF connector,connector cable assemblies and cable - Intermodulation level measurement 射频连接器、连接器电缆组件和电缆互调电平测量	China National Standards or	English PDF
GB/T 18311.31-2007	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources 纤维光学互连器件和无源器件基本试验和测量程序第3-31部分：检查和测量纤维光学光源耦合功率比测量	China National Standards or	English PDF
GB/T 18311.30-2007	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件基本试验和测量程序第3-30部分：检查和测量单套管多芯光纤连接器抛光角度和光纤位置	China National Standards or	English PDF
GB/T 15157.14-2007	Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范	China National Standards or	English PDF
GB/T 14805.4-2007	Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 4: Syntax and service report message for batch EDI (Message type_CONTRL）行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第4部分: 批式电子数据交换语法和服务报告报文(报文类型为CONTRL)	China National Standards or	English PDF
GB/T 14805.3-2007	Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 3: Syntax rules specific to interactive EDI 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第3部分: 交互式电子数据交换专用的语法规则	China National Standards or	English PDF
GB/T 14805.2-2007	Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 2: Syntax rules specific to batch EDI 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第2部分: 批式电子数据交换专用的语法规则	China National Standards or	English PDF
GB/T 14805.1-2007	Electronic data interchange for administration,commerce andtransport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 1: Syntax rules common to all parts 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号: 4，语法发布号:1) 第1部分：公用的语法规则	China National Standards or	English PDF
GB/T 11313.4-2007	Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型)	China National Standards or	English PDF
GB/T 11313.2-2007	Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors for type 9.52 射频连接器第2部分: 9.52型射频同轴连接器分规范	China National Standards or	English PDF
GB/T 20969.3-2007	Special environmental condition - Machinery for plateau - Part 3: The specification of select type and acceptance check for construction machinery on plateau 特殊环境条件高原机械第3部分：高原型工程机械选型、验收规范	China National Standards or	English PDF
GB/T 20969.2-2007	Special environmental condition - Machinery for plateau - Part 2: Requirements for construction machinery on plateau 特殊环境条件高原机械第2部分：高原对工程机械的要求	China National Standards or	English PDF
GB/T 20969.1-2007	Special environmental condition - Machinery for plateau - Part 1: Requirements for internal combustion engines on plateau 特殊环境条件高原机械第1部分：高原对内燃动力机械的要求	China National Standards or	English PDF
GB/T 20991-2007	Personal protective equipment - Test methods for footwear 个体防护装备鞋的测试方法	China National Standards or	English PDF
GB 8959-2007	Dust control code for foundry 铸造防尘技术规程	China National Standards or	English PDF
GB 7059-2007	Safety requirements for portable wood ladders 便携式木折梯安全要求	China National Standards or	English PDF
GB 15577-2007	Safety regulations for dust explosion prevention and protection 粉尘防爆安全规程	China National Standards or	English PDF
GB 14443-2007	Safety code for painting - Safety rules for paint drying oven 涂装作业安全规程涂层烘干室安全技术规定	China National Standards or	English PDF
GB 12142-2007	safety requirements for portable metal ladders 便携式金属梯安全要求	China National Standards or	English PDF
GB 14773-2007	Safety code for painting - Safety specification for electrostatic spray guns and associated apparatus 涂装作业安全规程静电喷枪及其辅助装置安全技术条件	China National Standards or	English PDF
GB 8771-2007	Maximum limits for soluble elements content of pencil coating 铅笔涂层中可溶性元素最大限量	China National Standards or	English PDF
GB 21046-2007	Porphyra yezoensis 条斑紫菜	China National Standards or	English PDF
GB/T 8243.12-2007	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法第12部分：采用颗粒计数法测定滤清效率和容灰量	China National Standards or	English PDF
GB/T 8243.11-2007	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法第11部分：自净式滤清器	China National Standards or	English PDF
GB/T 7927-2007	Method of vibration measurement for walking tractors 手扶拖拉机振动测量方法	China National Standards or	English PDF
GB/T 6229-2007	Test methods for walking tractors 手扶拖拉机试验方法	China National Standards or	English PDF
GB/T 6138.2-2007	Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸	China National Standards or	English PDF
GB/T 6138.1-2007	Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻第1部分：直柄阶梯麻花钻的型式和尺寸	China National Standards or	English PDF
GB/T 6129-2007	Technical specifications for angle cutters 角度铣刀技术条件	China National Standards or	English PDF
GB/T 5343.2-2007	Turning tool holders and cartridges for indexable inserts - Part 2: Dimensions and technical specifications of turning tool holders for indexable inserts 可转位车刀及刀夹第2部分：可转位车刀型式尺寸和技术条件	China National Standards or	English PDF
GB/T 5343.1-2007	Turning tool holders and cartridges for indexable inserts - Part 1: Designation 可转位车刀及刀夹第1部分：型号表示规则	China National Standards or	English PDF
GB/T 4127.9-2007	Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding 固结磨具尺寸第9部分：重负荷磨削砂轮	China National Standards or	English PDF
GB/T 4127.8-2007	Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging 固结磨具尺寸第8部分：去毛刺、荒磨和粗磨用砂轮	China National Standards or	English PDF
GB/T 4127.3-2007	Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding 固结磨具尺寸第3部分：内圆磨砂轮	China National Standards or	English PDF
GB/T 4127.2-2007	Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding 固结磨具尺寸第2部分：无心外圆磨砂轮	China National Standards or	English PDF
GB/T 4127.16-2007	Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools 固结磨具尺寸第16部分：手持式电动工具用切割砂轮	China National Standards or	English PDF
GB/T 4127.15-2007	Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines 固结磨具尺寸第15部分：固定式或移动式切割机用切割砂轮	China National Standards or	English PDF
GB/T 4127.1-2007	Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres 固结磨具尺寸第1部分：外圆磨砂轮（工件装夹在顶尖间）	China National Standards or	English PDF
GB/T 3464.3-2007	Machine and hand taps - Part 3：Short shank machine and hand taps 机用和手用丝锥第3部分：短柄机用和手用丝锥	China National Standards or	English PDF
GB/T 3044-2007	Chemical analysis methods for white fused alumina and pink fused alumina 白刚玉、铬刚玉化学分析方法	China National Standards or	English PDF
GB/T 2778-2007	Power take-off pulley for agricultural tractors - Peripheral speed and width 农业拖拉机动力输出皮带轮圆周速度和宽度	China National Standards or	English PDF
GB/T 20972.1-2007	Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selection of cracking-resistant materials 石油天然气工业油气开采中用于含硫化氢环境的材料第1部分：选择抗裂纹材料的一般原则	China National Standards or	English PDF
GB/T 20971-2007	Petroleum and natural gas industries - Equipment for well cementing - Performance testing of cementing float equipment 石油天然气工业固井设备注水泥浮动装置性能测试	China National Standards or	English PDF
GB/T 20960-2007	NC horizontal turret 数控卧式转塔刀架	China National Standards or	English PDF
GB/T 20958.2-2007	Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件精度检验第2部分: 立式铣床	China National Standards or	English PDF
GB/T 20958.1-2007	Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件精度检验第1部分: 卧式铣床	China National Standards or	English PDF
GB/T 20957.7-2007	Test conditions for precision machining centres - Part 7: Accuracy of a finished test piece 精密加工中心检验条件第7部分：精加工试件精度检验	China National Standards or	English PDF
GB/T 20957.5-2007	Test conditions of precision machining centres - Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets 精密加工中心检验条件第5部分：工件夹持托板的定位精度和重复定位精度检验	China National Standards or	English PDF
GB/T 20957.2-2007	Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 精密加工中心检验条件第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴)	China National Standards or	English PDF
GB/T 20957.1-2007	Test conditions for precision machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis) 精密加工中心检验条件第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴)	China National Standards or	English PDF
GB/T 20956-2007	Printing machinery - Safety requirements of the design and construction for cutting machines 印刷机械切纸机设计及结构安全规则	China National Standards or	English PDF
GB/T 20953-2007	Tractors and machinery for agriculture and forestry - Determination of burning behavior of cab interior materials 农林拖拉机和机械驾驶室内饰材料燃烧特性的测定	China National Standards or	English PDF
GB/T 20949-2007	Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors 农林轮式拖拉机照明和灯光信号装置的安装规定	China National Standards or	English PDF
GB/T 20948-2007	Rear-view mirrors requirements for agricultural and forestry tractors 农林拖拉机后视镜技术要求	China National Standards or	English PDF
GB/T 20947-2007	Short-link chain for lifting purposes - Grade T,(types T,DAT and DT),fine-tolerance hoist chain 起重用短环链 T级(T、DAT和DT型)高精度葫芦链	China National Standards or	English PDF
GB/T 20946-2007	short link chain for lifting purposes - General conditions of acceptance 起重用短环链验收总则	China National Standards or	English PDF
GB/T 15833-2007	Test methods for forestry wheeled tractors and crawler tractors 林业轮式和履带拖拉机试验方法	China National Standards or	English PDF
GB/T 15832-2007	General requirement of forestry wheeled tractors and crawler tractors 林业轮式和履带拖拉机通用技术条件	China National Standards or	English PDF
GB/T 14661-2007	Cartridges, type A,for indexable inserts 可转位A型刀夹	China National Standards or	English PDF
GB/T 11835-2007	Rock wool , slag wool and it’s products for thermal insulation 绝热用岩棉、矿渣棉及其制品	China National Standards or	English PDF
GB 50226-2007	Code for design of railway passenger station buildings 铁路旅客车站建筑设计规范(2011年版)	China National Standards or	English PDF
GB 50421-2007	Code for waste dump design of nonferrous metal mines 有色金属矿山排土场设计规范	China National Standards or	English PDF
GB 20952-2007	Emission standard of air pollutant for gasoline filling stations 加油站大气污染物排放标准	China National Standards or	English PDF
GB 20951-2007	Emission standard of air pollutant for gasoline transport 汽油运输大气污染物排放标准	China National Standards or	English PDF

Find out:36661Items | To Page of: First -Previous-Next -Last | [285] [286] [287] [288] [289] [290] [291]

- Since 2001 -
Focus on China Standards & Compliance Services

www.rjs.cn
China Licenses

www.transcustoms.com
China HS code & Tariff

www.gbstandards.org
China National Standards