GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 3216-2005 |
Rotodynamic pumps-Hdraulic peformance acceptance tests-Grades 1 and 2 回转动力泵 水力性能验收试验 1级和2级 |
China National Standards or |
English PDF |
GB/T 2353-2005 |
Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors 液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号 |
China National Standards or |
English PDF |
GB/T 19956.2-2005 |
Positive-displacement cacuum pumps-Measurement of performance characteristics Part2:Measurement of ultimate pressure 容积真空泵性能测量方法 第2部分:极限压力的测量 |
China National Standards or |
English PDF |
GB/T 19956.1-2005 |
Positive-displacement cacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards or |
English PDF |
GB/T 19955.2-2005 |
Vapour vacuum pumps-Measurement of performance characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分:临界前级压力的测量 |
China National Standards or |
English PDF |
GB/T 19955.1-2005 |
Vapour vacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards or |
English PDF |
GB/T 19939-2005 |
Technical Requirements for Crid Connection of PV System 光伏系统并网技术要求 |
China National Standards or |
English PDF |
GB/T 19936.1-2005 |
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards or |
English PDF |
GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards or |
English PDF |
GB/T 19932-2005 |
Earth-moving machinery-Hydraulic excavators-Laboratory tests and performance requirements for operator protective guards 土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求 |
China National Standards or |
English PDF |
GB/T 19930-2005 |
Earth-moving machinery-Tip-Over Protection Structure(TOPS)for compact excavators-Laboratory tests and performance requirements 土方机械 小型挖掘机 倾翻保护结构的试验室试验和性能要求 |
China National Standards or |
English PDF |
GB/T 19928-2005 |
Earth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom 土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量 |
China National Standards or |
English PDF |
GB/T 19926-2005 |
Hydraulic fluid power-Gas-loaded accumulators-Dimensions of gas port 液压传动 充气式蓄能器 气口尺寸 |
China National Standards or |
English PDF |
GB/T 19925-2005 |
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards or |
English PDF |
GB/T 19922-2005 |
Standard test methods for measuring site flatness on silicon wafers by noncontact scanning 硅片局部平整度非接触式标准测试方法 |
China National Standards or |
English PDF |
GB/T 1883.2-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance 往复式内燃机 词汇 第2部分:发动机维修术语 |
China National Standards or |
English PDF |
GB/T 1883.1-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation 往复式内燃机 词汇 第1部分:发动机设计和运行术语 |
China National Standards or |
English PDF |
GB/T 12224-2005 |
General requirements for industrial steel valves 钢制阀门 一般要求 |
China National Standards or |
English PDF |
GB/T 7985-2005 |
Conveyor belts -- Method for the determination of the tear propagation resistance of textile conveyor belts 输送带 织物芯输送带抗撕裂扩大性试验方法 |
China National Standards or |
English PDF |
GB/T 5754.2-2005 |
Steel cord conveyor belt -- Longitudinal test -- Part 2: Measurement of tensile strength 钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定 |
China National Standards or |
English PDF |
GB/T 3487-2005 |
Rim contour for motor vehicles 汽车轮辋规格系列 |
China National Standards or |
English PDF |
GB/T 3402.1-2005 |
Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分:命名体系和规范基础 |
China National Standards or |
English PDF |
GB/T 20029-2005 |
Rubber isolation bearings for instruments and equipments 仪器 设备用橡胶隔震垫 |
China National Standards or |
English PDF |
GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards or |
English PDF |
GB/T 20027-2005 |
Rubber-or plastics-coated fabrics -- Determiation of bursting strength 橡胶或塑料涂覆织物 破裂强度的测定 |
China National Standards or |
English PDF |
GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards or |
English PDF |
GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards or |
English PDF |
GB/T 20023-2005 |
Rubber and/or plastics hoses and hoses assemblies for airless paint spraying 无气喷涂用橡胶和/或塑料软管及软管组合件 |
China National Standards or |
English PDF |
GB/T 20022-2005 |
Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards or |
English PDF |
GB/T 20021-2005 |
Heat resistant conveyor belts of duck construction 帆布芯耐热输送带 |
China National Standards or |
English PDF |
GB/T 3903.14-2005 |
Footwear-Test methods for outsoles-Needle tear strength 鞋类-外底试验方法-针撕破强度 |
China National Standards or |
English PDF |
GB/T 3903.13-2005 |
Footwear-Test methods for outsoles-Dimensional stability 鞋类-外底试验方法-尺寸稳定性 |
China National Standards or |
English PDF |
GB/T 3903.12-2005 |
Footwear-Test methods for outsoles-Tear strengh 鞋类-外底试验方法-撕裂强度 |
China National Standards or |
English PDF |
GB/T 3903.11-2005 |
Footwear-Test methods for insoles,lining and insocks-perspiration resistance 鞋类-内底、衬里和内垫试验方法-耐汗性 |
China National Standards or |
English PDF |
GB/T 3903.10-2005 |
Footwear-Test methods for insoles-Dimensional stability 鞋类-内底试验方法-尺寸稳定性 |
China National Standards or |
English PDF |
GB/Z 19027-2005 |
Guidance on statistical techniques for GB/T19001-2000 GB/T19001-2000的统计技术指南 |
China National Standards or |
English PDF |
GB/T 19016-2005 |
Quality management systems -- Guidelines for quality management in projects 质量管理体系 项目质量管理指南 |
China National Standards or |
English PDF |
GB 19891-2005 |
Safety of machinery-Hygiene requirements for the design of machinery 机械安全 机械设计的卫生要求 |
China National Standards or |
English PDF |
GB/T 4791-2005 |
Graphical symbols for pipline accessory of ships 船舶管路附件图形符号 |
China National Standards or |
English PDF |
GB/T 19920-2005 |
Container buttress fitting for ships 船用集装箱支撑件 |
China National Standards or |
English PDF |
GB/T 19919-2005 |
Small craft-Windows,portlights,hatches,deadlights and doors Strength and watertightness requirements 小艇 窗、舷窗、舱口盖、风暴盖和门 强度和密封性要求 |
China National Standards or |
English PDF |
GB/T 19912-2005 |
Safety code for the rubber-tyred transtainer 轮胎式集装箱门式起重机安全规程 |
China National Standards or |
English PDF |
GB/T 19910-2005 |
Technical requirements for electronic control system of motor-vehicles engine being overhauled 汽车发动机电子控制系统修理技术要求 |
China National Standards or |
English PDF |
GB/T 19904-2005 |
Electrochemical oxygenmeter for medical hyperbaric oxygen chamber 医用氧舱用电化学式测氧仪 |
China National Standards or |
English PDF |
GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards or |
English PDF |
GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards or |
English PDF |
GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards or |
English PDF |
GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards or |
English PDF |
GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法 |
China National Standards or |
English PDF |
GB/T 18570.5-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards or |
English PDF |
GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards or |
English PDF |
GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards or |
English PDF |
GB/T 10868-2005 |
Steam converting valve for power stations 电站减温减压阀 |
China National Standards or |
English PDF |
GB 5908-2005 |
flame arresters for petroleum tanks 石油储罐阻火器 |
China National Standards or |
English PDF |
GB 3445-2005 |
Indoor fire hydrant 室内消火栓 |
China National Standards or |
English PDF |
GB 3033.2-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 2:Additional colours for different media and/or functions 船舶与海上技术 管路系统内含物的识别颜色 第2部分:不同介质和(或)功能的附加颜色 |
China National Standards or |
English PDF |
GB 3033.1-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 1:Main colours and media 船舶与海上技术 管路系统内含物的识别颜色 第1部分:主颜色和介质 |
China National Standards or |
English PDF |
GB 5226.4-2005 |
Safety of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems 机械安全 机械电气设备 第31部分:缝纫机、缝制单元和缝制系统的特殊安全和EMC要求 |
China National Standards or |
English PDF |
GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分:电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards or |
English PDF |
GB/T 6148-2005 |
Test method for temperature-resistance coefficient of precision resistance alloys 精密电阻合金电阻温度系数测试方法 |
China National Standards or |
English PDF |
GB/T 6147-2005 |
Test method for thermoelectric power of precision resistance alloys 精密电阻合金热电动势率 测试方法 |
China National Standards or |
English PDF |
GB/T 4591-2005 |
Test Chart for Electrostatic Copying Process 静电图像测试版 |
China National Standards or |
English PDF |
GB/T 19903.1-2005 |
Industrial automation systems and integration-Physical device control-Data model for computerized numerical controllers-Part 1:Overview and fundamental principles 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第1部分:概述和基本原理 |
China National Standards or |
English PDF |
GB/T 19902.2-2005 |
Industrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 2:Profiling methodology 工业自动化系统与集成--制造软件互操作性能力建规 第2部分:建规方法论 |
China National Standards or |
English PDF |
GB/T 19902.1-2005 |
Industrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 1:Framework 工业自动化系统与集成--制造软件互操作性能力建规 第1部分:框架 |
China National Standards or |
English PDF |
GB/T 19901-2005 |
Metal thermowells for thermometer sensors-Functional dimensions 温度计检测元件的金属套管 实用尺寸 |
China National Standards or |
English PDF |
GB/T 19899-2005 |
Binary direct voltage signals for process Measurement and control systems 过程测量和控制系统用二进制 直流电压信号 |
China National Standards or |
English PDF |
GB/T 19897.3-2005 |
Automatic Meter Reading System Lower Layer Communication Protocol Part 3:Physical layer services and procedures for connection oriented asynchronous data exchange 自动抄表系统低层通信协议 第3部分:面向连接的异步数据交换的物理层服务进程 |
China National Standards or |
English PDF |
GB/T 19897.2-2005 |
Automatic Meter Reading System Lower Layer Communication Protocol Part 2:Use of area networks on twisted pair with carrier signalling 自动抄表系统低层通信协议 第2部分:基于双绞线载波信号的局域网使用 |
China National Standards or |
English PDF |
GB/T 19896-2005 |
Degrees of projected image sharpness for 70,35and 16mm motion-picture projection systems 70、35和16mm电影放映系统 画面清晰度等级 |
China National Standards or |
English PDF |
GB/T 19895.1-2005 |
Projection in indoor rooms-Screen illumination test for still projectors 室内放映 幻灯、投影放映设备 银幕照度的测定方法 |
China National Standards or |
English PDF |
GB/T 19894-2005 |
Digital still-picture cameras-Methods for measuring opto-electronic conversion functions(OECFs) 数码照相机 光电转换函数(OECFs)的测量方法 |
China National Standards or |
English PDF |
GB/T 19893-2005 |
Digital color print system 数码彩色扩印系统 |
China National Standards or |
English PDF |
GB/T 19889.7-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 7:Field measurements of impact sound insulation of floors 声学 建筑和建筑构件隔声测量 第7部分:楼板撞击声隔声的现场测量 |
China National Standards or |
English PDF |
GB/T 19889.6-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6:Laboratory measurements of impact sound insulation of floors 声学 建筑和建筑构件隔声测量 第6部分:楼板撞击声隔声的实验室测量 |
China National Standards or |
English PDF |
GB/T 19889.4-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part4:Field measurements of airborne sound insulation between rooms 声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量 |
China National Standards or |
English PDF |
GB/T 19889.3-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements 声学 建筑和建筑构件隔声测量 第3部分:建筑构件空气声隔声的实验室测量 |
China National Standards or |
English PDF |
GB/T 19889.1-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 1:Requirements for laboratory test facilities with suppressed flanking transmission 声学 建筑和建筑构件隔声测量 第1部分:侧向传声受抑制的实验室测试 设施要求 |
China National Standards or |
English PDF |
GB/T 19888.1-2005 |
Acoustics-Stationary audible warning devices used outdoors-Part 1:Field measurements for determination of sound emission quantities 声学 户外用固定式听觉报警器 第1部分:声发射量的现场测定 |
China National Standards or |
English PDF |
GB/T 19886-2005 |
Acoustics-Guidelines for noise control by enclosures and cabins 声学 隔声罩和隔声间噪声控制指南 |
China National Standards or |
English PDF |
GB/T 19885-2005 |
Acoustics-Determination of sound insulation performance of cabins-laborartory and in situ measurements 声学 隔声间的隔声性能测定 实验室和现场测量 |
China National Standards or |
English PDF |
GB/T 19884-2005 |
Acoustics-In-situ determination of insertion loss of outdoor noise barriers of all types 声学 各种户外声屏障插入损失的现场测定 |
China National Standards or |
English PDF |
GB/T 17249.2-2005 |
Acoustics-Guidelines for the design of low-noise workplaces-Part 2:Noise control measures 声学 低噪声工作场所设计指南 第2部分:噪声控制措施 |
China National Standards or |
English PDF |
GB/T 17214.4-2005 |
Operating conditions for industrial-process measurement and control equipment Part 4:Corrosive and erosive influences 工业过程测量和控制装置的工作条件 第4部分:腐蚀和侵蚀影响 |
China National Standards or |
English PDF |
GB/T 17214.2-2005 |
Operating conditions for industrial-process measurement and control equipment Part 2:Power 工业过程测量和控制装置的工作条件 第2部分:动力 |
China National Standards or |
English PDF |
GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards or |
English PDF |
GB/T 17213.3-2005 |
Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分:尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards or |
English PDF |
GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards or |
English PDF |
GB/T 17213.14-2005 |
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards or |
English PDF |
GB/T 17213.13-2005 |
Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分:定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards or |
English PDF |
GB/T 17213.12-2005 |
Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves 工业过程控制阀 第3-3部分:尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards or |
English PDF |
GB/T 17213.11-2005 |
Industrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves 工业过程控制阀 第3-2部分:尺寸 角行程控制阀(蝶阀除外)的端面距 |
China National Standards or |
English PDF |
GB/T 10973-2005 |
Color paper processor 彩色相纸冲洗机 |
China National Standards or |
English PDF |
GB/T 10970-2005 |
Color printer and processer 彩色扩印冲洗机 |
China National Standards or |
English PDF |
GB 8031-2005 |
Industrial electric detonator 工业电雷管 |
China National Standards or |
English PDF |
GB 6222-2005 |
Safety code for gas of industrial enterprises 工业企业煤气安全规程 |
China National Standards or |
English PDF |
GB 19881-2005 |
Safety regulation for dust explosion prevention in flax fiber processing system 亚麻纤维加工系统粉尘防爆安全规程 |
China National Standards or |
English PDF |
GB 14192-2005 |
Safety code of practice for logging operations 木材采伐运输安全通则 |
China National Standards or |
English PDF |
GB/T 19878-2005 |
General specifications for capacitance type & resistance type grain moisture tester 电容法和电阻法粮食水分测定仪 通用技术条件 |
China National Standards or |
English PDF |
GB/T 8381.9-2005 |
Determination of Choramphenicol in Feeds Gas Chromatography 饲料中氯霉素的测定 气相色谱法 |
China National Standards or |
English PDF |
Find out:36661Items | To Page of: First -Previous-Next -Last | [302] [303] [304] [305] [306] [307] [308] |