GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19873.2-2009 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring - part 2: Processing, analysis and presentation of vibration data 机器状态监测与诊断 振动状态监测 第2部分:振动数据处理、分析与描述 |
China National Standards p |
English PDF |
GB/T 18328.1-2009 |
Vibration generating machines - Guidance for selection - part 1: Equipment for environmental testing 振动发生设备选择指南 第1部分:环境试验设备 |
China National Standards p |
English PDF |
GB/T 16622-2009 |
Size designation,dimensions and load capacity for pressed-on solid tyres 压配式实心轮胎规格、尺寸与负荷 |
China National Standards p |
English PDF |
GB/T 16412-2009 |
Conveyor belts - propane single burner flammability test method 输送带 丙烷单燃烧器可燃性试验方法 |
China National Standards p |
English PDF |
GB/T 16588-2009 |
Belt drives - pulleys and V-ribbed belts for industrial applications - PH, PJ, PK, PL and PM profiles:dimensions 带传动 工业用多楔带与带轮 PH、PJ、PK、PL和PM型:尺寸 |
China National Standards p |
English PDF |
GB/T 15902-2009 |
Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus 输送带 弹性伸长率和永久伸长率的测定及弹性模量的计算 |
China National Standards p |
English PDF |
GB/T 14834-2009 |
Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals 硫化橡胶或热塑性橡胶 与金属粘附性及对金属腐蚀作用的测定 |
China National Standards p |
English PDF |
GB/T 14790.1-2009 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements 机械振动 人体暴露于手传振动的测量与评价 第1部分:一般要求 |
China National Standards p |
English PDF |
GB/T 13437-2009 |
Description of torsional vibration absorber characteristics 扭转振动减振器特性描述 |
China National Standards p |
English PDF |
GB/T 1190-2009 |
Technical specification of earth-mover tyres 工程机械轮胎技术要求 |
China National Standards p |
English PDF |
GB/T 11211-2009 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method 硫化橡胶或热塑性橡胶 与金属粘合强度的测定 二板法 |
China National Standards p |
English PDF |
GB/T 10823-2009 |
Size designation, dimensions and load capacity of solid tyres for pneumatic tyres rims 充气轮胎轮辋实心轮胎规格、尺寸与负荷 |
China National Standards p |
English PDF |
GB/T 10179-2009 |
Servo-hydraulic test equipment for generating vibration - Method of describing characteristics 液压伺服振动试验设备 特性的描述方法 |
China National Standards p |
English PDF |
GB/T 23598-2009 |
Code of practice for water resources bulletin 水资源公报编制规程 |
China National Standards p |
English PDF |
GB/T 23595.6-2009 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 6: Determination of conductivity 白光LED灯用稀土黄色荧光粉试验方法 第6部分:电导率的测定 |
China National Standards p |
English PDF |
GB/T 23595.5-2009 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 5: Determination of pH value 白光LED灯用稀土黄色荧光粉试验方法 第5部分:pH值的测定 |
China National Standards p |
English PDF |
GB/T 23595.4-2009 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 4: Determination of thermostability 白光LED灯用稀土黄色荧光粉试验方法 第4部分:热稳定性的测定 |
China National Standards p |
English PDF |
GB/T 23595.3-2009 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 3: Determination of chromaticity coordinates 白光LED灯用稀土黄色荧光粉试验方法 第3部分:色品坐标的测定 |
China National Standards p |
English PDF |
GB/T 23595.2-2009 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 2: Determination of relative brightness 白光LED灯用稀土黄色荧光粉试验方法 第2部分:相对亮度的测定 |
China National Standards p |
English PDF |
GB/T 23595.1-2009 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 1: Determination of spectrum property 白光LED灯用稀土黄色荧光粉试验方法 第1部分:光谱性能的测定 |
China National Standards p |
English PDF |
GB/T 23594.2-2009 |
Chemical analysis methods of rare earth contents in samarium-europium-gadolinium concentrates - Part 2: Determination of fifteen rare earth oxide relative contents - Inductively coupled plasma emission spectrometry 钐铕钆富集物化学分析方法 第2部分:十五个稀土元素氧化物配分量的测定 电感耦合等离子发射光谱法 |
China National Standards p |
English PDF |
GB/T 23594.1-2009 |
Chemical analysis methods of rare earth contents in samarium-europium-gadolinium concentrates - Part 1: Determination of total rare earth oxide content - Gravimetry 钐铕钆富集物化学分析方法 第1部分:稀土氧化物总量的测定 重量法 |
China National Standards p |
English PDF |
GB/T 23593-2009 |
Yttrium-europium-gadolinium oxide 钇铕钆氧化物 |
China National Standards p |
English PDF |
GB/T 23592-2009 |
Catalyst for motorcycle exhaust purification 摩托车排气净化催化剂 |
China National Standards p |
English PDF |
GB/T 23590-2009 |
praseodymium-neodymium fluoride 氟化镨钕 |
China National Standards p |
English PDF |
GB/T 23588-2009 |
Scraps of neodymium iron boron 钕铁硼废料 |
China National Standards p |
English PDF |
GB/T 18881-2009 |
Catalyst for light-duty petrol vehicle exhaust purification 轻型汽油车排气净化催化剂 |
China National Standards p |
English PDF |
GB/T 16482-2009 |
Yttrium-europium oxide-phosphor grade 荧光级氧化钇铕 |
China National Standards p |
English PDF |
GB/T 13560-2009 |
Materials for sintered neodymium iron boron permanent magnets 烧结钕铁硼永磁材料 |
China National Standards p |
English PDF |
GB/T 6409.2-2009 |
Superabrasives - Diamond or cubic boron nitride grinding tools - Shapes and dimensions 超硬磨料制品 金刚石或立方氮化硼磨具 形状和尺寸 |
China National Standards p |
English PDF |
GB/T 2481.2-2009 |
Bonded abrasives - Determination and designation of grain size distribution - part 2: Microgrits 固结磨具用磨料 粒度组成的检测和标记 第2部分:微粉 |
China National Standards p |
English PDF |
GB/T 23541-2009 |
Bonded abrasive products - Grinding wheel for steel balls 固结磨具 磨钢球砂轮 |
China National Standards p |
English PDF |
GB/T 23540-2009 |
Coated abrasives - Flap wheels with incorporated flanges or separate flanges 涂附磨具 装有卡盘或未装卡盘的页轮 |
China National Standards p |
English PDF |
GB/T 23539-2009 |
Coated abrasives - Flap wheels with shaft 涂附磨具 带轴页轮 |
China National Standards p |
English PDF |
GB/T 23537-2009 |
Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride and mounted points 超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差 |
China National Standards p |
English PDF |
GB/T 23536-2009 |
Superabrasive - Types of synthetic diamond 超硬磨料 人造金刚石品种 |
China National Standards p |
English PDF |
GB/T 21944.4-2009 |
Special products of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 4:Burner nozzle 碳化硅特种制品 反应烧结碳化硅窑具 第4部分:烧嘴套 |
China National Standards p |
English PDF |
GB/T 21944.2-2009 |
Special products of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 2:Special beam 碳化硅特种制品 反应烧结碳化硅窑具 第2部分:异型梁 |
China National Standards p |
English PDF |
GB/T 20316.1-2009 |
Abrasive grains - Determination of bulk density - part 1: Macrogrits 普通磨料 堆积密度的测定 第1部分:粗磨粒 |
China National Standards p |
English PDF |
GB/T 16458-2009 |
Terminology for abrasives and abrasive products 磨料磨具术语 |
China National Standards p |
English PDF |
GB/T 16457.2-2009 |
Blanks for superabrasive cutting-off wheels - Dimensions - Part 2:Hand-held cutting-off in building and civil engineering 超硬材料锯片基体尺寸 第2部分:用于建筑物和土木工程材料的手持切割 |
China National Standards p |
English PDF |
GB/T 16457.1-2009 |
Blanks for superabrasive cutting-off wheels - Dimensions - Part 1:Manually guided cutting-off in building and civil engineering 超硬材料锯片基体尺寸 第1部分:用于建筑物和土木工程材料的机械切割 |
China National Standards p |
English PDF |
GB/T 23599-2009 |
pure culture of straw mushroom 草菇菌种 |
China National Standards p |
English PDF |
GB/T 13835.9-2009 |
Test method for rabbit hair - part 9: Crimp properties 兔毛纤维试验方法 第9部分:卷曲性能 |
China National Standards p |
English PDF |
GB/T 13835.8-2009 |
Test method for rabbit hair - part 8: Extractable matter by ether 兔毛纤维试验方法 第8部分:乙醚萃取物含量 |
China National Standards p |
English PDF |
GB/T 13835.7-2009 |
Test method for rabbit hair - part 7: Whiteness 兔毛纤维试验方法 第7部分:白度 |
China National Standards p |
English PDF |
GB/T 13835.6-2009 |
Test method for rabbit hair - part 6: Diameter - Projection microscope method 兔毛纤维试验方法 第6部分:直径 投影显微镜法 |
China National Standards p |
English PDF |
GB/T 13835.5-2009 |
Test method for rabbit hair - part 5: Breaking tenacity and elongation at break of single fibre 兔毛纤维试验方法 第5部分:单纤维断裂强度和断裂伸长率 |
China National Standards p |
English PDF |
GB/T 13835.4-2009 |
Test method for rabbit hair - part 4: Moisture regain - Drying oven method 兔毛纤维试验方法 第4部分:回潮率 烘箱法 |
China National Standards p |
English PDF |
GB/T 13835.3-2009 |
Test method for rabbit hair - part 3: Percentage of foreign matter,coarse hair and loosen hair 兔毛纤维试验方法 第3部分:含杂率、粗毛率和松毛率 |
China National Standards p |
English PDF |
GB/T 13835.2-2009 |
Test method for rabbit hair - part 2: Average length and percentage of short hair - Hand-arrange method 兔毛纤维试验方法 第2部分:平均长度和短毛率 手排法 |
China National Standards p |
English PDF |
GB/T 13835.1-2009 |
Test method for rabbit hair - part 1: Sampling 兔毛纤维试验方法 第1部分:取样 |
China National Standards p |
English PDF |
GB/T 23491-2009 |
Acceptance guide for processing technique and equipment of feed enterprise 饲料企业生产工艺及设备验收指南 |
China National Standards p |
English PDF |
GB 3883.18-2009 |
Safety of hand held motor-operated electric tools - Part 2: Particular requirements for tile saws 手持式电动工具的安全 第二部分:石材切割机的专用要求 |
China National Standards p |
English PDF |
GB 16895.7-2009 |
Low-voltage electrical installations - part 7-704: Requirements for special installations or locations - Construction and demolition site installations 低压电气装置 第7-704部分:特殊装置或场所的要求 施工和拆除场所的电气装置 |
China National Standards p |
English PDF |
GB 13960.4-2009 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers 可移式电动工具的安全 第二部分:平刨和厚度刨的专用要求 |
China National Standards p |
English PDF |
GB 13960.10-2009 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders 可移式电动工具的安全 第二部分:单轴立式木铣的专用要求 |
China National Standards p |
English PDF |
GB 23712-2009 |
Electrical equipment of industrial machines - Electromagnetic compatibility - Emission limits for machine tools 工业机械电气设备 电磁兼容 机床发射限值 |
China National Standards p |
English PDF |
GB/T 5326-2009 |
Combed printed or dyed polyester/cotton blended fabrics 精梳涤棉混纺印染布 |
China National Standards p |
English PDF |
GB/T 5325-2009 |
Combed polyester/cotton grey fabrics 精梳涤棉混纺本色布 |
China National Standards p |
English PDF |
GB/T 5324-2009 |
Combed polyester/cotton blended grey yarn 精梳涤棉混纺本色纱线 |
China National Standards p |
English PDF |
GB/T 22853-2009 |
Knitted sportwear 针织运动服 |
China National Standards p |
English PDF |
GB/T 22851-2009 |
Yarn-dyed pattern fabric 色织提花布 |
China National Standards p |
English PDF |
GB/T 22850-2009 |
Brocade craft products 织锦工艺制品 |
China National Standards p |
English PDF |
GB/T 22846-2009 |
Test methods of four points system for visually inspecting knitted fabrics 针织布(四分制)外观检验 |
China National Standards p |
English PDF |
GB/T 22843-2009 |
Cushion and pillow 枕、垫类产品 |
China National Standards p |
English PDF |
GB/T 22799-2009 |
Test method for hydroscopicity of towel product 毛巾产品吸水性测试方法 |
China National Standards p |
English PDF |
GB/T 22798-2009 |
Test method for fiber fall off of towel product 毛巾产品脱毛率测试方法 |
China National Standards p |
English PDF |
GB/T 17760-2009 |
Method of inspection for printed or dyed fabric surface defects 印染布布面疵点检验方法 |
China National Standards p |
English PDF |
GB/T 17759-2009 |
Method of inspection for grey fabric surface defects 本色布布面疵点检验方法 |
China National Standards p |
English PDF |
GB/T 23646-2009 |
Fuel cell power system for electric bicycles - Technical specification 电动自行车用燃料电池发电系统 技术条件 |
China National Standards p |
English PDF |
GB/T 23645-2009 |
Test methods of fuel cell power system for passenger cars 乘用车用燃料电池发电系统测试方法 |
China National Standards p |
English PDF |
GB/T 23644-2009 |
General specifications for electrical special equipment 电工专用设备通用技术条件 |
China National Standards p |
English PDF |
GB/T 23643-2009 |
High speed braiding machine for wire and cable 电线电缆用高速编织机 |
China National Standards p |
English PDF |
GB/T 23642-2009 |
Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses 电气绝缘材料和系统 瞬时上升和重复冲击电压条件下的局部放电(PD)电气测量 |
China National Standards p |
English PDF |
GB/T 23641-2009 |
Fiber reinforced unsaturated polyester moulding-compounds(SMC and BMC)for electrical purposes 电气用纤维增强不饱和聚酯模塑料(SMC/BMC) |
China National Standards p |
English PDF |
GB/T 23640-2009 |
AC generators for reciprocating internal combustion(RIC) engine driven generating sets 往复式内燃机(RIC)驱动的交流发电机 |
China National Standards p |
English PDF |
GB/T 23639-2009 |
Energy conservation and corrosion-resistant steel-madecable support system 节能耐腐蚀钢制电缆桥架 |
China National Standards p |
English PDF |
GB/T 23637-2009 |
Master controller in ships 船用主令控制器 |
China National Standards p |
English PDF |
GB/T 23636-2009 |
plate for lead-acid battery 铅酸蓄电池用极板 |
China National Standards p |
English PDF |
GB/T 20936.3-2009 |
Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air 可燃性气体探测用电气设备 第3部分:显示空气中甲烷体积含量至100%的I类探测器的性能要求 |
China National Standards p |
English PDF |
GB/T 20042.5-2009 |
proton exchange membrane fuel cell - Part 5: Test method for membrane electrode assembly 质子交换膜燃料电池 第5部分:膜电极测试方法 |
China National Standards p |
English PDF |
GB/T 20042.4-2009 |
proton exchange membrane fuel cell - Part 4: Test method for electrocatalysts 质子交换膜燃料电池 第4部分:电催化剂测试方法 |
China National Standards p |
English PDF |
GB/T 20042.3-2009 |
proton exchange membrane fuel cell - Part 3: Test method for proton exchange membrane 质子交换膜燃料电池 第3部分:质子交换膜测试方法 |
China National Standards p |
English PDF |
GB/T 13539.4-2009 |
Low-voltage fuses - part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices 低压熔断器 第4部分:半导体设备保护用熔断体的补充要求 |
China National Standards p |
English PDF |
GB/T 23690-2009 |
procedure for the declaration of materials in products of the electrotechnical and electronic industry 电子电气产品材料声明程序 |
China National Standards p |
English PDF |
GB/T 23689-2009 |
Guide of environmentally conscious declaration for ICT & CE products 信息通信技术和消费电子产品环境意识设计声明导则 |
China National Standards p |
English PDF |
GB/T 23688-2009 |
Guide of eco-design for energy-using products 用能产品环境意识设计导则 |
China National Standards p |
English PDF |
GB/T 23687-2009 |
Guide of environmentally conscious design for ICT & CE products 信息通信技术和消费电子产品的环境意识设计导则 |
China National Standards p |
English PDF |
GB/T 23686-2009 |
Environmentally conscious design guide for electrical and electronic products 电子电气产品的环境意识设计导则 |
China National Standards p |
English PDF |
GB/T 23685-2009 |
General technical specifications of recovering for waste electrical and electronic equipment 废电器电子产品回收利用通用技术要求 |
China National Standards p |
English PDF |
GB/T 23683-2009 |
Method of testing flow capacity of refrigerant capillary tubes 制冷剂毛细管流量的试验方法 |
China National Standards p |
English PDF |
GB/T 23682-2009 |
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation 制冷系统和热泵 软管件、隔震管和膨胀接头 要求、设计与安装 |
China National Standards p |
English PDF |
GB/T 23681-2009 |
Refrigerating systems and heat pumps - System flow diagrams and piping instrument diagrams - Layout and symbols 制冷系统和热泵 系统流程图和管路仪表图 绘图与符号 |
China National Standards p |
English PDF |
GB/T 23648-2009 |
Guideline of earthquake emergency response and rescue for community volunteer 社区志愿者地震应急与救援工作指南 |
China National Standards p |
English PDF |
GB/T 23647-2009 |
General specification for self-service terminal 自助服务终端通用规范 |
China National Standards p |
English PDF |
GB 10408.6-2009 |
Combined passive infrared and microwave detector 微波和被动红外复合入侵探测器 |
China National Standards p |
English PDF |
GB/T 6609.37-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 37: Determination of the particles size content less then 20μm 氧化铝化学分析方法和物理性能测定方法 第37部分:粒度小于20μm颗粒含量的测定 |
China National Standards p |
English PDF |
GB/T 6609.36-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 36: Determination of flow time 氧化铝化学分析方法和物理性能测定方法 第36部分:流动时间的测定 |
China National Standards p |
English PDF |
GB/T 6609.35-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 35: Determination of specific surface area by nitrogen adsorption 氧化铝化学分析方法和物理性能测定方法 第35部分:比表面积的测定 氮吸附法 |
China National Standards p |
English PDF |
Find out:43499Items | To Page of: First -Previous-Next -Last | [282] [283] [284] [285] [286] [287] [288] |