Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 19889.2-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-part2:Determination,verification and application of precision data 声学 建筑和建筑构件隔声测量 第2部分：数据精密度的确定、验证和应用 |
China National Standards p |
 English PDF |
| GB/T 19889.1-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-part 1:Requirements for laboratory test facilities with suppressed flanking transmission 声学 建筑和建筑构件隔声测量 第1部分：侧向传声受抑制的实验室测试 设施要求 |
China National Standards p |
English PDF |
| GB/T 19888.1-2005 |
Acoustics-Stationary audible warning devices used outdoors-part 1:Field measurements for determination of sound emission quantities 声学 户外用固定式听觉报警器 第1部分：声发射量的现场测定 |
China National Standards p |
English PDF |
| GB/T 19885-2005 |
Acoustics-Determination of sound insulation performance of cabins-laborartory and in situ measurements 声学 隔声间的隔声性能测定 实验室和现场测量 |
China National Standards p |
English PDF |
| GB/T 19884-2005 |
Acoustics-In-situ determination of insertion loss of outdoor noise barriers of all types 声学 各种户外声屏障插入损失的现场测定 |
China National Standards p |
English PDF |
| GB/T 19882.1-2005 |
Automatic Meter Reading System part 1:General Principles 自动抄表系统 第1部分：总则 |
China National Standards p |
English PDF |
| GB/T 19870-2005 |
Industrial inspecting thermal imagers 工业检测型红外热像仪 |
China National Standards p |
English PDF |
| GB/T 17249.2-2005 |
Acoustics-Guidelines for the design of low-noise workplaces-Part 2:Noise control measures 声学 低噪声工作场所设计指南 第2部分：噪声控制措施 |
China National Standards p |
English PDF |
| GB/T 17214.4-2005 |
Operating conditions for industrial-process measurement and control equipment Part 4:Corrosive and erosive influences 工业过程测量和控制装置的工作条件 第4部分：腐蚀和侵蚀影响 |
China National Standards p |
English PDF |
| GB/T 17214.2-2005 |
Operating conditions for industrial-process measurement and control equipment Part 2:Power 工业过程测量和控制装置的工作条件 第2部分：动力 |
China National Standards p |
English PDF |
| GB/T 17213.9-2005 |
Industrial-process control valves Part 2-3:Flow capacity-Test procedures 工业过程控制阀 第2-3部分：流通能力 试验程序 |
China National Standards p |
English PDF |
| GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分：定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards p |
English PDF |
| GB/T 17213.4-2005 |
Industrial-process control valves Part 4:Inspection and routine testing 工业过程控制阀 第4部分：检验和例行试验 |
China National Standards p |
English PDF |
| GB/T 17213.3-2005 |
Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分：尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards p |
English PDF |
| GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分：流通能力 安装条件下流体流量的计算公式 |
China National Standards p |
English PDF |
| GB/T 17213.16-2005 |
Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分：噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards p |
English PDF |
| GB/T 17213.15-2005 |
Industrial-process control valves Part 8-3:Noise considerations-Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分：噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards p |
English PDF |
| GB/T 17213.14-2005 |
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分：噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards p |
English PDF |
| GB/T 17213.13-2005 |
Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分：定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards p |
English PDF |
| GB/T 17213.12-2005 |
Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves 工业过程控制阀 第3-3部分：尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards p |
English PDF |
| GB/T 17213.11-2005 |
Industrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves 工业过程控制阀 第3-2部分：尺寸 角行程控制阀(蝶阀除外)的端面距 |
China National Standards p |
English PDF |
| GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分：流通能力 固有流量特性和可调比 |
China National Standards p |
English PDF |
| GB/T 16656.502-2005 |
Industrial automation systems and integration product data representation and exchange Part 502:Application interpreted construct:Shell-based wireframe 工业自动化系统与集成 产品数据表达与交换 第502部分:应用解释构:基于壳的线框 |
China National Standards p |
English PDF |
| GB/T 16656.501-2005 |
Industrial automation systems and integration product data representation and exchange Part 501:Application interpreted construct:Edge-based wireframe 工业自动化系统与集成 产品数据表达与交换 第501部分:应用解释构造:基于边的线框 |
China National Standards p |
English PDF |
| GB/T 10973-2005 |
Color paper processor 彩色相纸冲洗机 |
China National Standards p |
English PDF |
| GB/T 10970-2005 |
Color printer and processer 彩色扩印冲洗机 |
China National Standards p |
English PDF |
| GB/T 10047.1-2005 |
Camera part 1:civil miniature camera 照相机 第1部分：民用小型照相机 |
China National Standards p |
English PDF |
| GB 6222-2005 |
Safety code for gas of industrial enterprises 工业企业煤气安全规程 |
China National Standards p |
English PDF |
| GB 19914-2005 |
powder load 射钉弹 |
China National Standards p |
English PDF |
| GB 19881-2005 |
Safety regulation for dust explosion prevention in flax fiber processing system 亚麻纤维加工系统粉尘防爆安全规程 |
China National Standards p |
English PDF |
| GB 14192-2005 |
Safety code of practice for logging operations 木材采伐运输安全通则 |
China National Standards p |
English PDF |
| GB/T 14614.4-2005 |
Determination of rheological properties of dough using alveograph 小麦粉面团流变特性测定 吹泡仪法 |
China National Standards p |
English PDF |
| GB/T 19878-2005 |
General specifications for capacitance type & resistance type grain moisture tester 电容法和电阻法粮食水分测定仪 通用技术条件 |
China National Standards p |
English PDF |
| GB/T 8381.9-2005 |
Determination of Choramphenicol in Feeds Gas Chromatography 饲料中氯霉素的测定 气相色谱法 |
China National Standards p |
English PDF |
| GB/T 8381.8-2005 |
Determination of polychlorobiphenyls(PCBs)in Feeds-Gas Chromatography 饲料中多氯联苯的测定 气相色谱法 |
China National Standards p |
English PDF |
| GB/T 8381.6-2005 |
Method for determination of deoxynivalenol in formula feed-Thin layer chromatography 配合饲料中脱氧雪腐镰刀菌烯醇的测定 薄层色谱法 |
China National Standards p |
English PDF |
| GB/T 8381.4-2005 |
Method for determination of T-2 toxin in formula feed-Thin layer chromatography 配合饲料中 T-2 毒素的测定 薄层色谱法 |
China National Standards p |
English PDF |
| GB/T 8381.11-2005 |
Determination of Amprolium in Feeds-High Performance Liquid Chromatography 饲料中盐酸氨丙啉的测定-高效液相色谱法 |
China National Standards p |
English PDF |
| GB/T 8381.10-2005 |
Determination of Sulfaquinoxaline in feeds High-performance Liquid chromatography 饲料中磺胺喹恶啉的测定-高效液相色谱法 |
China National Standards p |
English PDF |
| GB/T 17778-2005 |
Determination of d-biotin in premix 预混合饲料中d-生物素的测定 |
China National Standards p |
English PDF |
| GB/T 13080.2-2005 |
Determination of chelation percentage of iron、copper、manganese and zinc methionine of gel filtration chromatography 饲料添加剂 蛋氨酸铁(铜、锰、锌)螯合率的测定 凝胶过滤色谱法 |
China National Standards p |
English PDF |
| GB/T 19857-2005 |
Determination of malachite green and crystal violet residues in aquatic product 水产品中孔雀石绿和结晶紫残留量的测定 |
China National Standards p |
English PDF |
| GB 19877.3-2005 |
Special Toilet Soaps 特种香皂 |
China National Standards p |
English PDF |
| GB 19877.2-2005 |
Special Bath Agents and Shower Agents 特种沐浴剂 |
China National Standards p |
English PDF |
| GB 19877.1-2005 |
Special Hand Cleaner 特种洗手液 |
China National Standards p |
English PDF |
| GB/T 19859-2005 |
product of geographicl indication-kuerle fragrant pear 地理标志产品 库尔勒香梨 |
China National Standards p |
English PDF |
| GB/T 19858-2005 |
product of geographicl indication-Fuling mustard tuber 地理标志产品 涪陵榨菜 |
China National Standards p |
English PDF |
| GB 4716-2005 |
point type heat fire detectors 点型感温火灾探测器 |
China National Standards p |
English PDF |
| GB 4715-2005 |
Smoke detectors-point detectors using scattered light,transmitted light or ionization 点型感烟火灾探测器 |
China National Standards p |
English PDF |
| GB 19880-2005 |
Manual fire call points 手动火灾报警按钮 |
China National Standards p |
English PDF |
| GB 16838-2005 |
Environmental test methods and severities for fire electronic products 消防电子产品 环境试验方法及严酷等级 |
China National Standards p |
English PDF |
| GB 15208.1-2005 |
Micro-dose X-ray security inspection system-Part 1:General technical requirements 微剂量X射线安全检查设备 第1部分：通用技术要求 |
China National Standards p |
English PDF |
| GB 14003-2005 |
Smoke detectors-Line detectors using an optical light beam 线型光束感烟火灾探测器 |
China National Standards p |
English PDF |
| GB 19872-2005 |
Rock drilling machines and pneumatic tools-Limited value of noise 凿岩机械与气动工具 噪声限值 |
China National Standards p |
English PDF |
| GB 17957-2005 |
Rock drilling machines and pneumatic tools-Safety requirements 凿岩机械与气动工具 安全要求 |
China National Standards p |
English PDF |
| GB 10892-2005 |
Stationary air compressors-Safety rules and code of practice 固定的空气压缩机 安全规则和操作规程 |
China National Standards p |
English PDF |
| GB/T 19875-2005 |
Mechanical vibration and shock-Vibration of stationary structures-Specific requirements for quality management in measurement and evaluation of vibration 机械振动与冲击 固定结构的振动 在振动测量和评价方面质量管理的具体要求 |
China National Standards p |
English PDF |
| GB/T 19874-2005 |
Mechanical vibration-Susceptibility and sensitivity of machines to unbalance 机械振动 机器不平衡敏感度和不平衡灵敏度 |
China National Standards p |
English PDF |
| GB/T 19873.1-2005 |
Condition monitoring and diagnostics of machines-Vibration condition monitoring-part 1:General procedures 机器状态监测与诊断 振动状态监测 第1部分：总则 |
China National Standards p |
English PDF |
| GB/T 14099-2005 |
Gas turbines-procurement 燃气轮机 采购 |
China National Standards p |
English PDF |
| GB 15763.2-2005 |
Safety glazing materials in building-part2:Tempered glass 建筑用安全玻璃 第2部分：钢化玻璃 |
China National Standards p |
English PDF |
| GB/T 16825.2-2005 |
Verification of static uniaxial testing machines-part 2:Tension creep testing machines-Verification of the applied force 静力单轴试验机的检验 第2部分：拉力蠕变试验机施加力的检验 |
China National Standards p |
English PDF |
| GB 4706.1-2005 |
Household and similar electrical appliances-Safety Part 1:General requirements 家用和类似用途电器的安全 第1部分:通用要求 |
China National Standards p |
English PDF |
| GB/T 772-2005 |
Technical specifications of porcelain element for high voltage insulators 高压绝缘子瓷件 技术条件 |
China National Standards p |
English PDF |
| GB/T 5585.2-2005 |
Copper or aluminium and its alloy bus bars for electrical purposes Part 2:Aluminium and aluminium alloy bus bars 电工用铜、铝及其合金母线 第2部分：铝和铝合金母线 |
China National Standards p |
English PDF |
| GB/T 5585.1-2005 |
Copper or aluminium and its alloy bus bars for electrical purposes Part 1:Copper and copper alloy bus bars 电工用铜、铝及其合金母线 第1部分：铜和铜合金母线 |
China National Standards p |
English PDF |
| GB/T 5170.20-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments 电工电子产品环境试验设备 基本参数检定方法 水试验设备 |
China National Standards p |
English PDF |
| GB/T 5170.19-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备 |
China National Standards p |
English PDF |
| GB/T 5170.17-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 |
China National Standards p |
English PDF |
| GB/T 4797.2-2005 |
Environmental conditions for electric and electronic products appearing in nature Part 2:Altitude and air pressure,deepness and water pressure 电工电子产品自然环境条件 第2部分：海拔与气压、水深与水压 |
China National Standards p |
English PDF |
| GB/T 2423.36-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/BFc：散热和非散热试验样品的高温/振动(正弦)综合试验 |
China National Standards p |
English PDF |
| GB/T 2423.35-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/Afc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/AFc：散热和非散热试验样品的低温/振动(正弦)综合试验 |
China National Standards p |
English PDF |
| GB/T 2423.28-2005 |
Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering 电工电子产品环境试验 第2部分：试验方法 试验T：锡焊 |
China National Standards p |
English PDF |
| GB/T 2423.27-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test 电工电子产品环境试验 第2部分：试验方法 试验Z/AMD：低温/低气压/湿热连续综合试验 |
China National Standards p |
English PDF |
| GB/T 16514.2-2005 |
Electromechanical switches for use in electronic equipment Part 5:Sectional specification for pushbutton switches Section 1-Blank detail specification 电子设备用机电开关 第5-1部分：按钮开关 空白详细规范 |
China National Standards p |
English PDF |
| GB/T 14598.17-2005 |
Electrical relay-part 22-6：Electrical disturbance tests for measuring relays and protection equipment-Immunity to conducted disturbances induced by radio frequency fields 电气继电器 第22-6部分：量度继电器和保护装置的电气骚扰试验-射频场感应的传导骚扰的抗扰度 |
China National Standards p |
English PDF |
| GB/T 11020-2005 |
Flammability of solid non-metallic meterials when exposed to flame sources-List of test methods 固体非金属材料暴露在火焰源时的燃烧性试验方法清单 |
China National Standards p |
English PDF |
| GB/T 1094.4-2005 |
power transformers-Part 4:Guide to the lightning impulse and switching impulse testing-Power transformers and reactors 电力变压器 第4部分：电力变压器和电抗器的雷电冲击和操作冲击试验导则 |
China National Standards p |
English PDF |
| GB/T 10761-2005 |
General requirements for tropical electrical micro-machine 热带微电机基本技术要求 |
China National Standards p |
English PDF |
| GB/T 10593.1-2005 |
Measuring methods of environmental parameters for electric and electronic products Part 1:Vibration 电工电子产品环境参数测量方法 第1部分：振 动 |
China National Standards p |
English PDF |
| GB/T 1029-2005 |
Test procedures for three-phase synchronous machines 三相同步电机试验方法 |
China National Standards p |
English PDF |
| GB/T 10067.4-2005 |
Basic specifications for electroheat installations Part 4:Indirect resistance furnaces 电热装置基本技术条件 第4部分：间接电阻炉 |
China National Standards p |
English PDF |
| GB/T 10067.2-2005 |
Basic specifications for electroheat installations Part 2:Arc electroheat installations 电热装置基本技术条件 第2部分：电弧加热装置 |
China National Standards p |
English PDF |
| GB/T 10067.1-2005 |
Basic specifications for electroheat installations Part 1:General 电热装置基本技术条件 第1部分：通用部分 |
China National Standards p |
English PDF |
| GB/T 10066.11-2005 |
Test methods for electroheat installations part 11:Submerged-arc furnaces 电热装置的试验方法 第11部分：埋弧炉 |
China National Standards p |
English PDF |
| GB/T 10066.10-2005 |
Test methods for electroheat installtions part 10:Direct arc furnaces 电热装置的试验方法 第10部分：直接电弧炉 |
China National Standards p |
English PDF |
| GB/T 19851.9-2005 |
Sports equipment and playground for middle school primary school Part 9:Shuttlecocks 中小学体育器材和场地 第9部分:羽毛球拍 |
China National Standards p |
English PDF |
| GB/T 19851.8-2005 |
Sports equipment and playground for middle school primary school Part 8:Table tennis ball 中小学体育器材和场地 第8部分:乒乓球 |
China National Standards p |
English PDF |
| GB/T 19851.7-2005 |
Sports equipment and playground for middle school primary school Part 7:Table tennis table 中小学体育器材和场地 第7部分:乒乓球台 |
China National Standards p |
English PDF |
| GB/T 19851.6-2005 |
Sports equipment and playground for middle school primary school Part 6:Soft-volleyball 中小学体育器材和场地 第6部分:软式排球 |
China National Standards p |
English PDF |
| GB/T 19851.5-2005 |
Sports equipment and playground for middle school primary school Part 5:Volleyball 中小学体育器材和场地 第5部分:排球 |
China National Standards p |
English PDF |
| GB/T 19851.4-2005 |
Sports equipment and playground for middle school primary school Part 4:Basketball 中小学体育器材和场地 第4部分:篮球 |
China National Standards p |
English PDF |
| GB/T 19851.3-2005 |
Sports equipment and playground for middle school primary school Part 3:Basketball backstop 中小学体育器材和场地 第3部分:篮球架 |
China National Standards p |
English PDF |
| GB/T 19851.2-2005 |
Sports equipment and playground for middle school primary school Part 2:Gymnastic equipment 中小学体育器材和场地 第2部分:体操器材 |
China National Standards p |
English PDF |
| GB/T 19851.12-2005 |
Sports equipment and playground for middle school primary school Part 12:Checkout-equipment for physique-health of students 中小学体育器材和场地 第12部分:学生体质健康测试器材 |
China National Standards p |
English PDF |
| GB/T 19851.1-2005 |
Sports equipment and playground for middle school primary school Part 1:Body-building equipment 中小学体育器材和场地 第1部分:健身器材 |
China National Standards p |
English PDF |
| GB/T 19851.11-2005 |
Sports equipment and playground for middle school primary school Part 11:Synthetic surfaced athletic aracks 中小学体育器材和场地 第11部分:合成材料面层运动场地 |
China National Standards p |
English PDF |
| GB/T 19851.10-2005 |
Sports equipment and playground for middle school primary school Part 10:Tennis Racket 中小学体育器材和场地 第10部分:网球拍 |
China National Standards p |
English PDF |
| GB/T 4083-2005 |
General safety principles of nuclear reactor protection system 核反应堆保护系统安全准则 |
China National Standards p |
English PDF |
| GB/T 6417.2-2005 |
Classification and explanation of imperfections in pressure welded joints 金属压力焊接头缺欠分类及说明 |
China National Standards p |
English PDF |
| Find out:43499Items | To Page of: First -Previous-Next -Last | [362] [363] [364] [365] [366] [367] [368] |
+86-755-25831330
