GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 38922-2020 |
General specification for 35kV and below voltage standardized protection equipment 35kV及以下标准化继电保护装置通用技术要求 |
China National Standards p |
English PDF |
GB/T 38921-2020 |
Specification of steam turbine safty protection system for thermal power plant 火力发电厂汽轮机安全保护系统技术条件 |
China National Standards p |
English PDF |
GB/T 38920-2020 |
Coding requirements for dispatch unit of hazardous waste 危险废物储运单元编码要求 |
China National Standards p |
English PDF |
GB/T 38919-2020 |
General technical requirements for porous media burners 多孔介质燃烧器通用技术要求 |
China National Standards p |
English PDF |
GB/T 38918-2020 |
Civil airplane landing gear structure design and simulation 民用飞机起落架结构设计与仿真 |
China National Standards p |
English PDF |
GB/T 38914-2020 |
Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application 车用质子交换膜燃料电池堆使用寿命测试评价方法 |
China National Standards p |
English PDF |
GB/T 38907-2020 |
Water saving enterprises—Polysilicon industry 节水型企业 多晶硅行业 |
China National Standards p |
English PDF |
GB/T 38906-2020 |
Low impact development stormwater management and harvest—Facility classification 低影响开发雨水控制利用 设施分类 |
China National Standards p |
English PDF |
GB/T 38903-2020 |
Technical guideline for material flow analysis of industrial parks 工业园区物质流分析技术导则 |
China National Standards p |
English PDF |
GB/T 38899-2020 |
Implementation guidance for energy management system in chemical industry 化工行业能源管理体系实施指南 |
China National Standards p |
English PDF |
GB/T 38889-2020 |
Antennas and reception systems for radio interference—Antenna measurement—Vehicle antennas and system 天线及接收系统的无线电干扰 天线测量 车载天线及系统 |
China National Standards p |
English PDF |
GB/T 38888-2020 |
performance and calibration methods for data acquisition software 数据采集软件的性能及校准方法 |
China National Standards p |
English PDF |
GB/T 38897-2020 |
Non-destructive testing—Measurement method for material elastic modulus and poisson’s ratio using ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards p |
English PDF |
GB/T 38896-2020 |
Non-destructive testing—Integrated non-destructive testing—General principles 无损检测 集成无损检测 总则 |
China National Standards p |
English PDF |
GB/T 38894-2020 |
Non-destructive testing—Electrochemical testing—General principles 无损检测 电化学检测 总则 |
China National Standards p |
English PDF |
GB/T 38887-2020 |
Spherical graphite 球形石墨 |
China National Standards p |
English PDF |
GB/T 38886-2020 |
High temperature bearing steel 高温轴承钢 |
China National Standards p |
English PDF |
GB/T 38885-2020 |
General specification for ultra-high cleanliness of high carbon chromium bearing steel 超高洁净高碳铬轴承钢通用技术条件 |
China National Standards p |
English PDF |
GB/T 38883-2020 |
Non-destructive testing—Active thermographic testing method 无损检测 主动式红外热成像检测方法 |
China National Standards p |
English PDF |
GB/T 38881-2020 |
Non-destructive testing—Cloud-testing—General principles 无损检测 云检测 总则 |
China National Standards p |
English PDF |
GB/T 38879-2020 |
particle—Size analysis—Color image analysis methods 颗粒 粒度分析 彩色图像分析法 |
China National Standards p |
English PDF |
GB/T 38878-2020 |
System tests for the projects of high-voltage direct current (HVDC) transmission power using voltage sourced converters (VSC) 柔性直流输电工程系统试验 |
China National Standards p |
English PDF |
GB/T 38884-2020 |
High temperature stainless steels for bearing 高温不锈轴承钢 |
China National Standards p |
English PDF |
GB/T 38877-2020 |
Insulating coatings for the electrical steel strip(sheet) 电工钢带(片)绝缘涂层 |
China National Standards p |
English PDF |
GB/T 38875-2020 |
Reduced activation martensitic steel plates with heat-resistance and corrosion-resistance for nuclear facilities 核电用耐高温抗腐蚀低活化马氏体结构钢板 |
China National Standards p |
English PDF |
GB/T 38874.4-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 4:Production,operation,modification and supporting processes 农林拖拉机和机械 控制系统安全相关部件 第4部分:生产、运行、修改与支持规程 |
China National Standards p |
English PDF |
GB/T 38874.3-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 3: Series development,hardware and software 农林拖拉机和机械 控制系统安全相关部件 第3部分:软硬件系列开发 |
China National Standards p |
English PDF |
GB/T 38874.2-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 2: Concept phase 农林拖拉机和机械 控制系统安全相关部件 第2部分:概念阶段 |
China National Standards p |
English PDF |
GB/T 38874.1-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 1:General principles for design and development 农林拖拉机和机械 控制系统安全相关部件 第1部分:设计与开发通则 |
China National Standards p |
English PDF |
GB/T 38853-2020 |
performance requirements of monitoring and measuring systems used for data collection and analysis 用于数据采集和分析的监测和测量系统的性能要求 |
China National Standards p |
English PDF |
GB/T 38844-2020 |
Smart factory—General specification for time synchronization, time management and test in industry automation system 智能工厂 工业自动化系统时钟同步、管理与测量通用规范 |
China National Standards p |
English PDF |
GB/T 38843-2020 |
Data description of smart instrumentation—Actuators 智能仪器仪表的数据描述 执行机构 |
China National Standards p |
English PDF |
GB/T 38842-2020 |
Categories and test methods of practical superconducting wires—General characteristics and guidance 实用超导线的分类和检测方法 一般特性和指南 |
China National Standards p |
English PDF |
GB/T 38841-2020 |
Mechanical properties measurement—Room temperature tensile test of reacted Nb3Sn composite superconductors 力学性能测量 反应后的Nb3Sn复合超导线室温拉伸试验方法 |
China National Standards p |
English PDF |
GB/T 38840-2020 |
Digital technique application of building and residence community—Primary data element 建筑及居住区数字化技术应用 基础数据元 |
China National Standards p |
English PDF |
GB/T 38835-2020 |
Industrial robot—Life cycle impact on environment evaluation method 工业机器人 生命周期对环境影响评价方法 |
China National Standards p |
English PDF |
GB/T 38834.1-2020 |
Robotics—performance criteria and related test methods for service robots—Part 1: Locomotion for wheeled robots 机器人 服务机器人性能规范及其试验方法 第1部分:轮式机器人运动 |
China National Standards p |
English PDF |
GB/T 38833-2020 |
240V/336V DC power system technical requirements and test methods for information and telecommunication 信息通信用240V/336V直流供电系统技术要求和试验方法 |
China National Standards p |
English PDF |
GB/T 38832-2020 |
Technical requirements of broadband customer networking based on public telecommunication network—High-speed visible light communications under lighting constrains 基于公用电信网的宽带客户网络联网技术要求 通照一体化高速可见光通信 |
China National Standards p |
English PDF |
GB/T 38831-2020 |
Technical requirements for IpTV media delivery system—Media distribution and storage subsystem IPTV媒体交付系统技术要求 媒体分发存储子系统 |
China National Standards p |
English PDF |
GB/T 38830-2020 |
Technical requirements for IpTV media delivery system—Global load balance subsystem IPTV媒体交付系统技术要求 全局负载均衡子系统 |
China National Standards p |
English PDF |
GB/T 38829-2020 |
Technical requirements for IpTV media delivery system—Content access IPTV媒体交付系统技术要求 内容接入 |
China National Standards p |
English PDF |
GB/T 38828-2020 |
Technical requirements for IpTV media delivery system—Use cases and requirements IPTV媒体交付系统技术要求 场景和需求 |
China National Standards p |
English PDF |
GB/T 38827-2020 |
Technical requirements for IpTV media delivery system—Functional architecture IPTV媒体交付系统技术要求 体系架构 |
China National Standards p |
English PDF |
GB/T 38826-2020 |
Technical requirements for IpTV media delivery system—General requirements IPTV媒体交付系统技术要求 总体要求 |
China National Standards p |
English PDF |
GB/T 38825-2020 |
Requirements of riveting connection in civil aircraft of composite parts 民用飞机复合材料制件铆接要求 |
China National Standards p |
English PDF |
GB/T 38822-2020 |
Metallic materials—Creep-fatigue test method 金属材料 蠕变-疲劳试验方法 |
China National Standards p |
English PDF |
GB/T 38818-2020 |
Steel wire ropes for hanger of suspension bridge 悬索桥吊索用钢丝绳 |
China National Standards p |
English PDF |
GB/T 38817-2020 |
Steel for high heat input welding 大线能量焊接用钢 |
China National Standards p |
English PDF |
GB/T 38815-2020 |
Superalloy powders atomized by plasma rotating electrode process 等离子旋转电极雾化高温合金粉末 |
China National Standards p |
English PDF |
GB/T 38814-2020 |
Steel wire ropes slings—Fatigue testing method 钢丝绳索具 疲劳试验方法 |
China National Standards p |
English PDF |
GB/T 38813-2020 |
General requirements for hot-rolled pickled steel sheet and strip 热轧酸洗钢板及钢带的一般要求 |
China National Standards p |
English PDF |
GB/T 38812.3-2020 |
Direct reduced iron—Determination of silicon, manganese, phosphorus, vanadium, titanium, copper, aluminum, arsenic, magnesium, calcium, potassium and sodium content—Inductively coupled plasma atomic emission spectrometric method 直接还原铁 硅、锰、磷、钒、钛、铜、铝、砷、镁、钙、钾、钠含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards p |
English PDF |
GB/T 38812.2-2020 |
Direct reduced iron—Determination of metallic iron content—The potassium dichromate titrimetric method after decomposition of sample by ferric chloride 直接还原铁 金属铁含量的测定 三氯化铁分解重铬酸钾滴定法 |
China National Standards p |
English PDF |
GB/T 38812.1-2020 |
Direct reduced iron—Determination of iron(Ⅱ) content—The potassium dichromate titrimetric method after decomposition of sample by ferric chloride 直接还原铁 亚铁含量的测定 三氯化铁分解重铬酸钾滴定法 |
China National Standards p |
English PDF |
GB/T 38810-2020 |
Seamless stainless steel pipes for liquefied natural gas 液化天然气用不锈钢无缝钢管 |
China National Standards p |
English PDF |
GB/T 38809-2020 |
General specification for low alloy ultra-high strength steels 低合金超高强度钢通用技术条件 |
China National Standards p |
English PDF |
GB/T 38807-2020 |
General specification for super austenitic stainless steels 超级奥氏体不锈钢通用技术条件 |
China National Standards p |
English PDF |
GB/T 38806-2020 |
Metallic materials—Sheet and strip—Test method for bending and folding properties 金属材料 薄板和薄带 弯折性能试验方法 |
China National Standards p |
English PDF |
GB/T 38804-2020 |
Test method for oxidation of metallic materials exposed in high-temperature steam 金属材料高温蒸汽氧化试验方法 |
China National Standards p |
English PDF |
GB/T 38803-2020 |
Specification for failure analysis of steel wire ropes 钢丝绳失效分析规范 |
China National Standards p |
English PDF |
GB/T 38795-2020 |
performance requirements of side airbag and curtain airbag module 汽车侧面气囊和帘式气囊模块性能要求 |
China National Standards p |
English PDF |
GB/T 38754-2020 |
Technical requirements for IpTV media delivery system—Streaming media services IPTV媒体交付系统技术要求 流媒体服务 |
China National Standards p |
English PDF |
GB/T 38696.2-2020 |
Eye and face protection—Intense light sources(non-laser) protector—Part 2: Guidance for use 眼面部防护 强光源(非激光)防护镜 第2部分:使用指南 |
China National Standards p |
English PDF |
GB/T 38696.1-2020 |
Eye and face protection—Intense light sources(non-laser) protector—Part 1: Technical requirements 眼面部防护 强光源(非激光)防护镜 第1部分:技术要求 |
China National Standards p |
English PDF |
GB/T 37733.3-2020 |
Sensor networks—Remote personal health status monitoring—Part 3: Terminals technical requirements 传感器网络 个人健康状态远程监测 第3部分:终端技术要求 |
China National Standards p |
English PDF |
GB/T 36290.1-2020 |
process diagrams for power plants—Part 1: Specification for diagrams 电站流程图 第1部分:制图规范 |
China National Standards p |
English PDF |
GB/T 36014.2-2020 |
Industrial process control devices—Radiation thermometers—Part 2:Determination of the technical data for radiation thermometers 工业过程控制装置 辐射温度计 第2部分:辐射温度计技术参数的确定 |
China National Standards p |
English PDF |
GB/T 32288-2020 |
Electrical steel core for power transformers 电力变压器用电工钢铁心 |
China National Standards p |
English PDF |
GB/T 31309-2020 |
Calculation of electron vacancy number in cast superalloys 铸造高温合金电子空位数计算方法 |
China National Standards p |
English PDF |
GB/T 30431-2020 |
Gas chromatography for laboratory 实验室气相色谱仪 |
China National Standards p |
English PDF |
GB/T 30269.809-2020 |
Information technology—Sensor networks—part 809:Testing:Conformance testing for the network layer of wireless sensor networks based on IP protocol 信息技术 传感器网络 第809部分:测试:基于IP的无线传感器网络网络层协议一致性测试 |
China National Standards p |
English PDF |
GB/T 27947-2020 |
Hygienic requirements for phenol disinfectant 酚类消毒剂卫生要求 |
China National Standards p |
English PDF |
GB/T 26371-2020 |
Hygienic requirements for peroxide disinfectants 过氧化物类消毒液卫生要求 |
China National Standards p |
English PDF |
GB/T 25085.3-2020 |
Road vehicles—Automotive cables—part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single-core copper conductor cables 道路车辆 汽车电缆 第3部分:交流30 V或直流60 V单芯铜导体电缆的尺寸和要求 |
China National Standards p |
English PDF |
GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards p |
English PDF |
GB/T 24180-2020 |
Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip 冷轧电镀铬钢板及钢带 |
China National Standards p |
English PDF |
GB/T 22578.3-2020 |
Electrical insulation system (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors 电气绝缘系统(EIS) 液体和固体组件的热评定 第3部分:密封式电动机-压缩机 |
China National Standards p |
English PDF |
GB/T 21715.6-2020 |
Health informatics—patient healthcard data—Part 6: Administrative data 健康信息学 患者健康卡数据 第6部分:管理数据 |
China National Standards p |
English PDF |
GB/T 21715.8-2020 |
Health informatics—patient healthcard data—Part 8: Links 健康信息学 患者健康卡数据 第8部分:链接 |
China National Standards p |
English PDF |
GB/T 20111.5-2020 |
Electrical insulation systems—procedures for thermal evaluation—Part 5: Applications with a designed life of 5000h or less 电气绝缘系统 热评定规程 第5部分:设计寿命5000h及以下的应用 |
China National Standards p |
English PDF |
GB/T 18569.2-2020 |
Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—part 2: Methodology leading to verification procedures 机械安全 减小由机械排放的有害物质对健康的风险 第2部分:生成验证流程的方法 |
China National Standards p |
English PDF |
GB/T 18569.1-2020 |
Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—part 1: Principles and specifications for machinery manufacturers 机械安全 减小由机械排放的有害物质对健康的风险 第1部分:用于机械制造商的原则和规范 |
China National Standards p |
English PDF |
GB/T 14598.301-2020 |
Technical requirements for power system continuous recorder 电力系统连续记录装置技术要求 |
China National Standards p |
English PDF |
GB/T 14513.3-2020 |
pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems 气动 使用可压缩流体元件的流量特性测定 第 3 部分:系统稳态流量特性的计算方法 |
China National Standards p |
English PDF |
GB/T 9771.6-2020 |
Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport 通信用单模光纤 第6部分:宽波长段光传输用非零色散单模光纤特性 |
China National Standards p |
English PDF |
GB/T 9771.5-2020 |
Single-mode optical fibres for telecommunication—Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre 通信用单模光纤 第5部分:非零色散位移单模光纤特性 |
China National Standards p |
English PDF |
GB/T 9771.4-2020 |
Single-mode optical fibres for telecommunication—Part 4: Characteristics of a dispersion shifted single-mode optical fibre 通信用单模光纤 第4部分:色散位移单模光纤特性 |
China National Standards p |
English PDF |
GB/T 9771.3-2020 |
Single-mode optical fibres for telecommunication—Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre 通信用单模光纤 第3部分:波长段扩展的非色散位移单模光纤特性 |
China National Standards p |
English PDF |
GB/T 9771.2-2020 |
Single-mode optical fibres for telecommunication—Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre 通信用单模光纤 第2部分:截止波长位移单模光纤特性 |
China National Standards p |
English PDF |
GB/T 9771.1-2020 |
Single-mode optical fibres for telecommunication—Part 1: Characteristics of a dispersion unshifted single-mode optical fibre 通信用单模光纤 第1部分:非色散位移单模光纤特性 |
China National Standards p |
English PDF |
GB/T 9065.6-2020 |
Connections for hydraulic fluid power—Hose fittings—Part 6: 60° cone ends 液压传动连接 软管接头 第6部分:60°锥形 |
China National Standards p |
English PDF |
GB/T 9065.4-2020 |
Connections for hydraulic fluid power—Hose fittings—Part 4: Stud ends 液压传动连接 软管接头 第4部分:螺柱端 |
China National Standards p |
English PDF |
GB/T 9065.3-2020 |
Connections for hydraulic fluid power—Hose fittings—Part 3: Flange ends 液压传动连接 软管接头 第3部分:法兰式 |
China National Standards p |
English PDF |
GB/T 8454-2020 |
Reduced ilmenite powder for welding rob—Determination of ferrous iron content—Potassium dichromate titrimetric method 焊条用还原钛铁矿粉 亚铁含量的测定 重铬酸钾滴定法 |
China National Standards p |
English PDF |
GB/T 8423.6-2020 |
petroleum and natural gas industries terminology—Part 6:Safety and environmental protection and energy conservation 石油天然气工业术语 第6部分:安全环保节能 |
China National Standards p |
English PDF |
GB/T 7920.9-2020 |
Earth-moving machinery—Graders—Terminology and commercial specifications 土方机械 平地机 术语和商业规格 |
China National Standards p |
English PDF |
GB/T 6770-2020 |
Special safety regulations for driver’s cabs of locomotives 机车司机室特殊安全规则 |
China National Standards p |
English PDF |
GB/T 6730.81-2020 |
Iron ores—Determination of multiple trace elements—Inductively coupled plasma mass spectrometric method 铁矿石 多种微量元素含量的测定 电感耦合等离子体质谱法 |
China National Standards p |
English PDF |
GB/T 5226.7-2020 |
Electrical safety of machinery—Electrical equipment of machines—Part 7: Requirements of industrial robot 机械电气安全 机械电气设备 第7部分:工业机器人技术条件 |
China National Standards p |
English PDF |
Find out:43499Items | To Page of: First -Previous-Next -Last | [65] [66] [67] [68] [69] [70] [71] |