GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 1800.2-2009 |
Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts 产品几何技术规范(GPS) 极限与配合 第2部分:标准公差等级和孔、轴极限偏差表 |
China National Standards pro |
English PDF |
GB/T 1800.1-2009 |
Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits 产品几何技术规范(GPS) 极限与配合 第1部分:公差、偏差和配合的基础 |
China National Standards pro |
English PDF |
GB/T 16747-2009 |
Geometrical product specification (GPS) - Surface texture:Profile method - Surface waviness terms 产品几何技术规范(GPS) 表面结构 轮廓法 表面波纹度词汇 |
China National Standards pro |
English PDF |
GB/T 16671-2009 |
Geometrical product specifications(GPS) - Geometrical tolerancing - Maximum material requirement(MMR),least material requirement(LMR) and reciprocity requirement(RPR) 产品几何技术规范(GPS) 几何公差 最大实体要求、最小实体要求和可逆要求 |
China National Standards pro |
English PDF |
GB/T 14495-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards pro |
English PDF |
GB/T 12471-2009 |
Geometrical product specifications(GPS) - Wooden part - Limit and fit 产品几何技术规范(GPS) 木制件 极限与配合 |
China National Standards pro |
English PDF |
GB/T 10610-2009 |
Geometrical product specifications(GPS) - Surface texture:Profile method - Rules and procedures for the assessment of surface texture 产品几何技术规范(GPS) 表面结构 轮廓法 评定表面结构的规则和方法 |
China National Standards pro |
English PDF |
GB/T 1031-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values 产品几何技术规范(GPS) 表面结构 轮廓法 表面粗糙度参数及其数值 |
China National Standards pro |
English PDF |
GB/T 9109.5-2009 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Dynamic measurement 石油和液体石油产品油量计算 动态计量 |
China National Standards pro |
English PDF |
GB/T 21412.6-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems 石油天然气工业 水下生产系统的设计与操作 第6部分:水下生产控制系统 |
China National Standards pro |
English PDF |
GB/T 21412.3-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems 石油天然气工业 水下生产系统的设计与操作 第3部分:过出油管(TFL)系统 |
China National Standards pro |
English PDF |
GB/T 14191.1-2009 |
prosthetics and orthotics-vocabulary - Part 1: General terms for external limb prostheses and external orthoses 假肢学和矫形器学术语 第1部分:体外肢体假肢和体外矫形器的基本术语 |
China National Standards pro |
English PDF |
GB/T 16901.3-2009 |
Rules for the presentation of graphical symbols - Graphical symbols for use in the technical documentation of products - Part 3: Classification of connect notes, networks and their encoding 技术文件用图形符号表示规则 第3部分:连接点、网络的分类及其编码 |
China National Standards pro |
English PDF |
GB/T 16679-2009 |
Industrial systems,installations and equipment and industrial products - Designation of signals 工业系统、装置与设备以及工业产品 信号代号 |
China National Standards pro |
English PDF |
GB/T 23270.2-2009 |
Information and documentation - Open systems interconnection - Interlibrary loan application protocol specification - Part 2: Protocol implementation conformance statement (PICS) proforma 信息与文献 开放系统互连 馆际互借应用协议规范 第2部分:协议实施一致性声明(PICS)条文 |
China National Standards pro |
English PDF |
GB/T 23270.1-2009 |
Information and documentation - Open system interconnection - Interlibrary loan application protocol specification - Part 1: Protocol specification 信息与文献 开放系统互连 馆际互借应用协议规范 第1部分:协议说明书 |
China National Standards pro |
English PDF |
GB/T 23247-2009 |
Autonomous drifting profiler 自持式剖面循环探测漂流浮标 |
China National Standards pro |
English PDF |
GB/T 23246-2009 |
Conductivity-temperature-depth profiler 电导率温度深度剖面仪 |
China National Standards pro |
English PDF |
GB/T 17358-2009 |
Power consumption, measurement,and testing in heat treating production 热处理生产电耗计算和测定方法 |
China National Standards pro |
English PDF |
GB/T 23263-2009 |
Determination of asbestos in products 制品中石棉含量测定方法 |
China National Standards pro |
English PDF |
GB/T 23260-2009 |
Waterproof sheet with self-adhering layer 带自粘层的防水卷材 |
China National Standards pro |
English PDF |
GB/T 8923.3-2009 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds,edges and other areas with surface imperfections 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第3部分:焊缝、边缘和其他区域的表面缺陷的处理等级 |
China National Standards pro |
English PDF |
GB/T 18573-2009 |
Small craft - Electrical devices - Lightning-protection systems 小艇 电气装置 避雷保护 |
China National Standards pro |
English PDF |
GB/T 18570.2-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分:清理过的表面上氯化物的实验室测定 |
China National Standards pro |
English PDF |
GB/T 18570.11-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法 |
China National Standards pro |
English PDF |
GB/T 13288.5-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法 |
China National Standards pro |
English PDF |
GB/T 13288.3-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 |
China National Standards pro |
English PDF |
GB/T 13030-2009 |
Specification for electric propulsion plant of ship 船舶电力推进系统技术条件 |
China National Standards pro |
English PDF |
GB/T 11700-2009 |
Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations 小艇 船用推进往复式内燃机 功率的测定和标定 |
China National Standards pro |
English PDF |
GB/T 21956.4-2009 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分:后置式动态试验方法 |
China National Standards pro |
English PDF |
GB 9690-2009 |
Hygienic standard for melamine - Formaldehyde products used as food containers and packaging materials 食品容器、包装材料用三聚氰胺-甲醛成型品卫生标准 |
China National Standards pro |
English PDF |
GB 23242-2009 |
Food processing machinery - Food processors and blenders - Safety and hygiene requirements 食品加工机械 食物切碎机和搅拌机 安全和卫生要求 |
China National Standards pro |
English PDF |
GB 50482-2009 |
Code for design of aluminium processing plant 铝加工厂工艺设计规范 |
China National Standards pro |
English PDF |
GB/T 23235-2009 |
Index and method of evaluating quality in project for conversion of cropland to forest 退耕还林工程质量评估指标与方法 |
China National Standards pro |
English PDF |
GB/T 23233-2009 |
Evaluation in project for the construction of conversion of cropland to forest 退耕还林工程建设效益监测评价 |
China National Standards pro |
English PDF |
GB/T 23231-2009 |
Checking regulation in project for conversion of cropland to forest 退耕还林工程检查验收规则 |
China National Standards pro |
English PDF |
GB/T 27342-2009 |
Hazard analysis and critical control point(HACCP)system - Requirements for dairy processing plant 危害分析与关键控制点(HACCP)体系 乳制品生产企业要求 |
China National Standards pro |
English PDF |
GB/T 27341-2009 |
Hazard analysis and critical control point(HACCP)system - General requirements for food processing plant 危害分析与关键控制点(HACCP)体系 食品生产企业通用要求 |
China National Standards pro |
English PDF |
GB/T 23268.1-2009 |
Specifications for protective equipments for sports - Part 1: Dynamic mountaineering ropes 运动保护装备要求 第1部分:登山动力绳 |
China National Standards pro |
English PDF |
GB/T 22900-2009 |
Science and technology research projects evaluation - General rules 科学技术研究项目评价通则 |
China National Standards pro |
English PDF |
GB 1444-2008 |
Edison screw lampholders specially used for explosion-proof liminaires 防爆灯具专用螺口式灯座 |
China National Standards pro |
English PDF |
GB 12279-2008 |
Cardiovasular implants - Cardiac valve prostheses 心血管植入物 人工心脏瓣膜 |
China National Standards pro |
English PDF |
GB/Z 22695-2008 |
Guidelines for the addition of environmental aspects in product standards specific to electrical accessories 在电器附件产品标准中增加环境因素的指南 |
China National Standards pro |
English PDF |
GB/T 2952.3-2008 |
protective coverings for electric cables - Part 3: General protective coverings for cables with non-metallic sheath 电缆外护层 第3部分:非金属套电缆通用外护层 |
China National Standards pro |
English PDF |
GB/T 2952.2-2008 |
protective coverings for electric cables - Part 2: Protective coverings for cables with metallic sheath 电缆外护层 第2部分:金属套电缆外护层 |
China National Standards pro |
English PDF |
GB/T 2952.1-2008 |
protective coverings for electric cables - Part 1: General 电缆外护层 第1部分:总则 |
China National Standards pro |
English PDF |
GB/T 22697.3-2008 |
The risk assessment for the temperatures of hot surfaces of electrical equipments to be touched - Part 3: The protective measures against burns 电气设备热表面灼伤风险评估 第3部分:防护措施 |
China National Standards pro |
English PDF |
GB/T 22694-2008 |
Fixed residual current protective socket-outlets without integral overcurrent protection for household and similar uses(FRCS) 家用和类似用途不带过电流保护的固定式剩余电流保护插座(FRCS) |
China National Standards pro |
English PDF |
GB/T 22684-2008 |
Motor-type programme controls for household and similar use 家用和类似用途电动机式程序控制器 |
China National Standards pro |
English PDF |
GB/T 22672-2008 |
Test procedures for small power synchronous motors 小功率同步电动机试验方法 |
China National Standards pro |
English PDF |
GB/T 22671-2008 |
Test procedures for with external rotor motors 外转子电动机试验方法 |
China National Standards pro |
English PDF |
GB/T 22670-2008 |
Test procedures for converter-fed three phase cage induction motors 变频器供电三相笼型感应电动机试验方法 |
China National Standards pro |
English PDF |
GB/T 22669-2008 |
Test procedures for three-phase permanent magnet synchronous machines 三相永磁同步电动机试验方法 |
China National Standards pro |
English PDF |
GB/T 19216.31-2008 |
Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 31: procedures and requirements for fire with shock - Cables of rated voltage up to and including 0.6/1 kV 在火焰条件下电缆或光缆的线路完整性试验 第31部分:供火并施加冲击的试验程序和要求 额定电压0.6/1kV及以下电缆 |
China National Standards pro |
English PDF |
GB/T 18802.22-2008 |
Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles 低压电涌保护器 第22部分:电信和信号网络的电涌保护器(SPD) 选择和使用导则 |
China National Standards pro |
English PDF |
GB 5092-2008 |
Specification of induction protective devices for presses 压力机用感应式安全装置技术条件 |
China National Standards pro |
English PDF |
GB/T 8143-2008 |
Test methods of lac products 紫胶产品检验方法 |
China National Standards pro |
English PDF |
GB/T 8142-2008 |
Methods of sampling lac products 紫胶产品取样方法 |
China National Standards pro |
English PDF |
GB/T 15721.5-2008 |
prosthetics and orthotics - Limb deficiencies - Part 5: Description of conditions of patient requiring a prosthesis 假肢和矫形器 肢体缺失 第5部分:截肢者的临床症状描述 |
China National Standards pro |
English PDF |
GB/T 15721.4-2008 |
prosthetics and orthotics - Limb deficiencies - Part 4: Description of causal conditions leading to amputation 假肢和矫形器 肢体缺失 第4部分:截肢原因的描述 |
China National Standards pro |
English PDF |
GB/T 22704-2008 |
Code of practice for the design and manufacture of children’s clothing to promote mechanical safety 提高机械安全性的儿童服装设计和生产实施规范 |
China National Standards pro |
English PDF |
GB 22749-2008 |
Food processing machinery - Slicing machines - Safety and hygiene requirements 食品加工机械 切片机 安全和卫生要求 |
China National Standards pro |
English PDF |
GB 22748-2008 |
Food processing machinery - Dough mixers - Safety and hygiene requirements 食品加工机械 立式和面机 安全和卫生要求 |
China National Standards pro |
English PDF |
GB 22747-2008 |
Food processing machinery - Basic concepts - Hygiene requirements 食品加工机械 基本概念 卫生要求 |
China National Standards pro |
English PDF |
GB/T 23225-2008 |
Tobacco and tobacco products - Determination of alkaloids - Spectrometric method 烟草及烟草制品 总植物碱的测定 光度法 |
China National Standards pro |
English PDF |
GB/T 23196-2008 |
Determination of ferulic acid content in propolis - HPLC-UV method 蜂胶中阿魏酸含量的测定方法 液相色谱-紫外检测法 |
China National Standards pro |
English PDF |
GB/T 22655-2008 |
product of geographical indication - Nantong changjiang obscure puffer 地理标志产品 南通长江河豚(养殖) |
China National Standards pro |
English PDF |
GB/T 19265-2008 |
product of geographical indication - Shacheng wine 地理标志产品 沙城葡萄酒 |
China National Standards pro |
English PDF |
GB/T 19049-2008 |
product of geographical indication - Changli wine 地理标志产品 昌黎葡萄酒 |
China National Standards pro |
English PDF |
GB/T 18353-2008 |
Basic technical condition of cotton processing enterprise 棉花加工企业基本技术条件 |
China National Standards pro |
English PDF |
GB/T 23217-2008 |
Determination of tetrodotoxin in aquatic products - HPLC-fluorescence detection method 水产品中河豚毒素的测定 液相色谱-荧光检测法 |
China National Standards pro |
English PDF |
GB/T 23182-2008 |
procedure for veterinary drug and other chemicals determination in feeds 饲料中兽药及其他化学物检测试验规程 |
China National Standards pro |
English PDF |
GB/T 22917-2008 |
protocol of fluorogenic RT-PCR for swine vesicular disease virus 猪水泡病病毒荧光RT-PCR检测方法 |
China National Standards pro |
English PDF |
GB/T 22916-2008 |
protocol of fluorogenic RT-PCR for vesicular stomatitis virus 水泡性口炎病毒荧光RT-PCR检测方法 |
China National Standards pro |
English PDF |
GB/T 22915-2008 |
protocol of universal fluorogenic RT-PCR for foot and mouth disease virus 口蹄疫病毒荧光RT-PCR检测方法 |
China National Standards pro |
English PDF |
GB/T 22985-2008 |
Determination of enrofloxacin, danofloxacin, ciprofloxacin, sarafloxacin, orbifloxacin, difloxacin and marbofloxacin in milk and milk powder - LC-MS-MS method 牛奶和奶粉中恩诺沙星、达氟沙星、环丙沙星、沙拉沙星、奥比沙星、二氟沙星和麻保沙星残留量的测定 液相色谱-串联质谱法 |
China National Standards pro |
English PDF |
GB/T 22335-2008 |
Technical regulations for cotton processing 棉花加工技术规程 |
China National Standards pro |
English PDF |
GB/T 18090-2008 |
Diagnostic methods of porcine reproductive and respiratory syndrome 猪繁殖与呼吸综合征诊断方法 |
China National Standards pro |
English PDF |
GB 17466.24-2008 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing pro tective devices and similar power consuming devices 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第24部分:住宅保护装置和类似电源功耗装置的外壳的特殊要求 |
China National Standards pro |
English PDF |
GB 17466.21-2008 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第21部分:用于悬吊装置的安装盒和外壳的特殊要求 |
China National Standards pro |
English PDF |
GB 17465.3-2008 |
Appliance couplers for household and similar general purposes - Part 2: Appliance couplers with a degree of protection higher than IPX0 家用和类似用途器具耦合器 第2部分:防护等级高于IPX0的器具耦合器 |
China National Standards pro |
English PDF |
GB 14536.5-2008 |
Automatic electrical controls for household and similar use - Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type 家用和类似用途电自动控制器 密封和半密封电动机-压缩机用电动机热保护器的特殊要求 |
China National Standards pro |
English PDF |
GB 14536.4-2008 |
Automatic electrical controls for household and similar use - Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps 家用和类似用途电自动控制器 管形荧光灯镇流器热保护器的特殊要求 |
China National Standards pro |
English PDF |
GB 22794-2008 |
Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) 家用和类似用途的不带和带过电流保护的B型剩余电流动作断路器(B型RCCB和B型RCBO) |
China National Standards pro |
English PDF |
GB 10963.2-2008 |
Circuit-breakers for overcurrent protection for household and similar installation - Part 2: Circuit-breakers for a.c. and d.c.operation 家用及类似场所用过电流保护断路器 第2部分:用于交流和直流的断路器 |
China National Standards pro |
English PDF |
GB/T 20634.4-2008 |
Non-impregnated densified laminated wood for electrical purposes - Part 4: Specifications for individual materials - Rings produced from birch veneer 电气用非浸渍致密层压木 第4部分:单项材料规范 由桦木薄片制成的环材 |
China National Standards pro |
English PDF |
GB/T 20634.3-2008 |
Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheets produced from birch veneer 电气用非浸渍致密层压木 第3部分:单项材料规范 由桦木薄片制成的板材 |
China National Standards pro |
English PDF |
GB/Z 6829-2008 |
General requirements for residual current operated protective devices 剩余电流动作保护电器的一般要求 |
China National Standards pro |
English PDF |
GB/Z 22721-2008 |
Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use 正确使用家用和类似用途剩余电流动作保护电器(RCD)的指南 |
China National Standards pro |
English PDF |
GB/T 5169.5-2008 |
Fire hazard testing for electric and electronic products - Part 5: Test flames - Needle test method - Apparatus, confirmatory arrangement and guidance 电工电子产品着火危险试验 第5部分:试验火焰 针焰试验方法 装置、确认试验方法和导则 |
China National Standards pro |
English PDF |
GB/T 5169.31-2008 |
Fire hazard testing for electric and eletronic products - Part 31: Surface spread of flame - General guidance 电工电子产品着火危险试验 第31部分:火焰表面蔓延 总则 |
China National Standards pro |
English PDF |
GB/T 5169.30-2008 |
Fire hazard testing for electric and electronic products - Part 30: Heat release - Summary and relevance of test methods 电工电子产品着火危险试验 第30部分:热释放 试验方法概要和相关性 |
China National Standards pro |
English PDF |
GB/T 5169.29-2008 |
Fire hazard testing for electric and electronic products - Part 29: Heat release - General guidance 电工电子产品着火危险试验 第29部分:热释放 总则 |
China National Standards pro |
English PDF |
GB/T 5169.28-2008 |
Fire hazard testing for electric and electronic products - Part 28: Smoke obscuration - Small-scale static test - Materials 电工电子产品着火危险试验 第28部分:烟模糊 小规模静态试验方法 材料 |
China National Standards pro |
English PDF |
GB/T 5169.27-2008 |
Fire hazard testing for electric and electronic products - Part 27: Smoke obscuration - Small-scale static test - Description of the apparatus 电工电子产品着火危险试验 第27部分:烟模糊 小规模静态试验方法 仪器说明 |
China National Standards pro |
English PDF |
GB/T 5169.26-2008 |
Fire hazard testing for electric and electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods 电工电子产品着火危险试验 第26部分:烟模糊 试验方法概要和相关性 |
China National Standards pro |
English PDF |
GB/T 5169.25-2008 |
Fire hazard testing for electric and electronic products - Part 25: Smoke obscuration - General guidance 电工电子产品着火危险试验 第25部分:烟模糊 总则 |
China National Standards pro |
English PDF |
GB/T 5169.24-2008 |
Fire hazard testing for electric and electronic products - Part 24: Guidance for assessing the fire hazard - Insulating liquids 电工电子产品着火危险试验 第24部分:着火危险评定导则 绝缘液体 |
China National Standards pro |
English PDF |
GB/T 5169.23-2008 |
Fire hazard testing for electric and electronic products - Part 23: Test flames-500W vertical flame test method for tubular polymeric materials 电工电子产品着火危险试验 第23部分:试验火焰 管形聚合材料500W垂直火焰试验方法 |
China National Standards pro |
English PDF |
GB/T 22762-2008 |
Built-in thermal protectors for electrical machines of household and similar use 家用和类似用途用装入式电动机热保护器 |
China National Standards pro |
English PDF |
Find out:8869Items | To Page of: First -Previous-Next -Last | [56] [57] [58] [59] [60] [61] [62] |