Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 24627-2023 |
Nickel-titanium shape memory alloy processing materials for surgical implants 外科植入物用镍-钛形状记忆合金加工材 |
China National Standards shape |
 English PDF |
| GB/T 17732-2023 |
Test methods for dense shaped carbon-containing refractory products 致密定形含碳耐火制品试验方法 |
China National Standards shape |
English PDF |
| GB/T 16763-2023 |
Classification of shaped thermal insulation and refractory products 定形隔热耐火制品分类 |
China National Standards shape |
English PDF |
| GB/T 2484-2023 |
Bonded Abrasives shape Types, Markings and Symbols 固结磨具 形状类型、标记和标志 |
China National Standards shape |
English PDF |
| GB/T 43196-2023 |
Nanotechnology Scanning electron microscopy to measure nanoparticle size and shape distribution 纳米技术 扫描电子显微术测量纳米颗粒粒度及形状分布 |
China National Standards shape |
English PDF |
| GB/T 28712.3-2023 |
Heat exchanger types and basic parameters Part 3: U-shaped tube heat exchanger 热交换器型式与基本参数 第3部分：U形管式热交换器 |
China National Standards shape |
English PDF |
| GB/T 42690-2023 |
Shipbuilding Deck machinery Drum shape 造船 甲板机械 绞缆筒外形 |
China National Standards shape |
English PDF |
| GB/T 42516-2023 |
Chemical analysis method of high temperature shape memory alloy - determination of platinum content - thiourea complex precipitation method 高温形状记忆合金化学分析方法 铂含量的测定 硫脲络合沉淀法 |
China National Standards shape |
English PDF |
| GB/T 21944.2-2022 |
Silicon carbide special products - Reaction sintered silicon carbide kiln furniture - Part 2: shaped beams 碳化硅特种制品 反应烧结碳化硅窑具 第2部分：异形梁 |
China National Standards shape |
English PDF |
| GB/T 41420-2022 |
Testing and evaluation of shape memory properties of textiles 纺织品 形状记忆性能检测和评价 |
China National Standards shape |
English PDF |
| GB/T 41403-2022 |
Superabrasive Products Diamond or CBN Abrasives shapes and Dimensions 超硬磨料制品 金刚石或立方氮化硼磨具 形状和尺寸 |
China National Standards shape |
English PDF |
| GB/T 41763-2022 |
Dimensions, shapes, weights and allowable deviations of twin-roll cast-rolled hot-rolled steel sheets and strips 双辊铸轧热轧薄钢板及钢带的尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 18931-2022 |
Classification of alkaline dense shaped refractory products with carbon content less than 7% 碳含量小于7%的碱性致密定形耐火制品分类 |
China National Standards shape |
English PDF |
| GB 16161-2021 |
Regulations for the shape of the marks of maritime buoyage system in China 中国海区水上助航标志形状显示规定 |
China National Standards shape |
English PDF |
| GB/T 40316-2021 |
Welded high strength shaped and round steel tubes for automobile structure 汽车结构用高强度异型及圆形焊接钢管 |
China National Standards shape |
English PDF |
| GB 16161-2021 |
Regulations for the shape of the marks of maritime buoyage system in China 中国海区水上助航标志形状显示规定 |
China National Standards shape |
English PDF |
| GB/T 39989-2021 |
Superelastic titanium-nickel shape memory alloy bar and wire 超弹性钛镍形状记忆合金棒材和丝材 |
China National Standards shape |
English PDF |
| GB/T 39985-2021 |
Titanium-nickel shape memory alloy plate 钛镍形状记忆合金板材 |
China National Standards shape |
English PDF |
| GB/T 39967-2021 |
5-axis simultaneous machining center -- Accuracy of S-shaped test piece 五轴联动加工中心 S形试件精度检验 |
China National Standards shape |
English PDF |
| GB/T 39799-2021 |
Dimension,shape,weight and tolerances for titanium and titanium alloy bars and wires 钛及钛合金棒材和丝材尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 40568-2021 |
Nanotechnologies—Characterization of multiwall carbon nanotubes—Mesoscopic shape factors 纳米技术 多壁碳纳米管的表征 介观形状因子 |
China National Standards shape |
English PDF |
| GB/T 38982-2020 |
Method of measuring shape and dimension for wrought titanium and titanium alloy products 钛及钛合金加工产品外形尺寸检测方法 |
China National Standards shape |
English PDF |
| GB/T 16546-2020 |
General rules for packing, marking, transport, storage and quality certificates of shaped refractory 定形耐火材料包装、标志、运输、储存和质量证明书的一般规定 |
China National Standards shape |
English PDF |
| GB/T 15545-2020 |
General rules for packing, marking, transport, storage and quality certificates of unshaped refractory 不定形耐火材料包装、标志、运输、储存和质量证明书的一般规定 |
China National Standards shape |
English PDF |
| GB/T 25895.2-2020 |
Water safety signs and beach safety flags—Part 2: Specifications for beach safety flags colour,shape,meaning and performance 水域安全标志和海滩安全旗 第2部分：海滩安全旗颜色、形状、含义及性能的规范 |
China National Standards shape |
English PDF |
| GB/T 908-2019 |
Forged bars for dimensions,shape,weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 37799-2019 |
shaped reinforced concrete pipes 钢筋混凝土异形管 |
China National Standards shape |
English PDF |
| GB/T 908-2019 |
Forged bars for dimensions,shape,weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 709-2019 |
Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet 热轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 708-2019 |
Dimension,shape,weight and tolerance for cold-rolled steel strip and sheet 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 37171-2018 |
Specification and test methods for bronze plate containing diamond-shaped solid lubricant 含有菱形固体润滑剂的青铜板材技术要求和检验方法 |
China National Standards shape |
English PDF |
| GB/T 36341.3-2018 |
Information technology—Information presentation of shape modeling—Part 3: Streaming transmission 信息技术 形状建模信息表示 第3部分：流式传输 |
China National Standards shape |
English PDF |
| GB/T 36341.4-2018 |
Information technology—Information presentation of shape modeling—Part 4: Storage format 信息技术 形状建模信息表示 第4部分：存储格式 |
China National Standards shape |
English PDF |
| GB/T 36341.1-2018 |
Information technology—Information representation of shape modeling—Part 1: Framework and basic component 信息技术 形状建模信息表示 第1部分：框架和基本组件 |
China National Standards shape |
English PDF |
| GB/T 36341.2-2018 |
Information technology—Information representation of shape modeling—Part 2: Feature constraint 信息技术 形状建模信息表示 第2部分：特征约束 |
China National Standards shape |
English PDF |
| GB/T 36134-2018 |
Monolithic(unshaped) refractory products—Determination of resistance to explosive spalling during heating 不定形耐火材料 抗爆裂性试验方法 |
China National Standards shape |
English PDF |
| GB/T 342-2017 |
Dimension,shape,mass and tolerance of cold-drawn round,square and hexagonal steel wires 冷拉圆钢丝、方钢丝、六角钢丝尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 34901-2017 |
shape closed-loop control system for cold rolling strip 冷轧带材板形闭环测控系统 |
China National Standards shape |
English PDF |
| GB/T 34902-2017 |
Contact shapemeter for cold rolling strip 冷轧带材接触式板形仪 |
China National Standards shape |
English PDF |
| GB/T 34334-2017 |
Test method of mirror shape for solar collector 光热玻璃反射镜面形测试方法 |
China National Standards shape |
English PDF |
| GB/T 4513.4-2017 |
Monolithic (unshaped) refractory products—Part 4： Determination of consistency of castables 不定形耐火材料 第4部分：浇注料流动性的测定 |
China National Standards shape |
English PDF |
| GB/T 4513.2-2017 |
Monolithic (unshaped) refractory products—Part 2：Sampling for testing 不定形耐火材料 第2部分：取样 |
China National Standards shape |
English PDF |
| GB/T 4513.7-2017 |
Monolithic (unshaped) refractory products—Part 7：Tests on pre-formed shapes 不定形耐火材料 第7部分：预制件的测定 |
China National Standards shape |
English PDF |
| GB/T 4513.5-2017 |
Monolithic (unshaped) refractory products—Part5： Preparation and treatment of test pieces 不定形耐火材料 第5部分：试样制备和预处理 |
China National Standards shape |
English PDF |
| GB/T 4513.6-2017 |
Monolithic (unshaped) refractory products—Part 6：Measurement of physical properties 不定形耐火材料 第6部分：物理性能的测定 |
China National Standards shape |
English PDF |
| GB/T 4513.8-2017 |
Monolithic (unshaped) refractory products—Part 8： Determination of complementary properties 不定形耐火材料 第8部分：特殊性能的测定 |
China National Standards shape |
English PDF |
| GB/T 4513.3-2017 |
Monolithic (unshaped) refractory products—Part 3：Characterization as received 不定形耐火材料 第3部分：基本特性 |
China National Standards shape |
English PDF |
| GB/T 702-2017 |
Hot-rolled steel bars—Dimensions,shape,weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 34374-2017 |
Stamping dies—L-shaped guide plates 冲模 L形导板 |
China National Standards shape |
English PDF |
| GB/T 7321-2017 |
Sample preparation for testing of shaped refractory products 定形耐火制品试样制备方法 |
China National Standards shape |
English PDF |
| GB/T 34106-2017 |
Hot-dip zinc or zinc-aluminium coated S-shaped steel wire wraps for bridge cables 桥梁主缆缠绕用S形热镀锌或锌铝合金钢丝 |
China National Standards shape |
English PDF |
| GB/T 10326-2016 |
shaped refractory products inspections of dimension, appearance and section 定形耐火制品尺寸、外观及断面的检查方法 |
China National Standards shape |
English PDF |
| GB/T 3000-2016 |
Dense shaped refractory products—Determination of permeability to gases 致密定形耐火制品 透气度试验方法 |
China National Standards shape |
English PDF |
| GB/T 5587-2016 |
Basic shapes,dimensions,symbols and notations of silver based electrical contacts 银基电触头基本形状、尺寸、符号及标注 |
China National Standards shape |
English PDF |
| GB/T 2998-2015 |
Test method for bulk density and true porosity of shaped insulating refractory products 定形隔热耐火制品体积密度和真气孔率试验方法 |
China National Standards shape |
English PDF |
| GB/T 2997-2015 |
Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products 致密定形耐火制品体积密度、显气孔率和真气孔率试验方法 |
China National Standards shape |
English PDF |
| GB/T 4513.1-2015 |
Monolithic (unshaped) refractory products—Part 1: Introduction and classification 不定形耐火材料 第1部分：介绍和分类 |
China National Standards shape |
English PDF |
| GB/T 15445.6-2014 |
Representation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology 粒度分析结果的表述 第6部分：颗粒形状和形态的定性及定量表述 |
China National Standards shape |
English PDF |
| GB 31039-2014 |
Pretensioned spun concrete special-shaped piles 先张法预应力离心混凝土异型桩 |
China National Standards shape |
English PDF |
| GB/T 30870-2014 |
Classification of special dense shaped refractory products 特种致密定形耐火制品分类 |
China National Standards shape |
English PDF |
| GB/T 30829-2014 |
shaped and round seamless steel tubes for oil derrick 石油井架用异型及圆形无缝钢管 |
China National Standards shape |
English PDF |
| GB/T 30757-2014 |
Classification of basic dense shaped refractory products containing from 7% to 50% residual carbon 残碳量7％～50％的碱性致密定形耐火制品分类 |
China National Standards shape |
English PDF |
| GB/T 2992.2-2014 |
Dimensions of refractory bricks―Part 2: Terminology for shapes and brickworks of refractory bricks 耐火砖形状尺寸 第2部分：耐火砖砖形及砌体术语 |
China National Standards shape |
English PDF |
| GB/T 13916-2013 |
Unnoted tolerance of shape and position for stamping parts 冲压件形状和位置未注公差 |
China National Standards shape |
English PDF |
| GB/T 16763-2012 |
shaped insulating refractory products - Classification 定形隔热耐火制品分类 |
China National Standards shape |
English PDF |
| GB/T 10325-2012 |
shaped refractory products-rule of acceptance,sampling and inspection 定形耐火制品验收抽样检验规则 |
China National Standards shape |
English PDF |
| GB/T 28849-2012 |
SX series experimental box-shape resistance furnace SX系列实验用箱式电阻炉 |
China National Standards shape |
English PDF |
| GB/T 3094-2012 |
Cold drawn shaped steel tubes 冷拔异型钢管 |
China National Standards shape |
English PDF |
| GB/T 26456-2011 |
Woven paper machine dryer fabric with special shape yarn 造纸用异形丝干燥网 |
China National Standards shape |
English PDF |
| GB/T 26303.3-2010 |
Measuring methods for dimensions and shapes of wrought copper and copper alloys - Part 3: Sheets and strips 铜及铜合金加工材外形尺寸检测方法 第3部分 板带材 |
China National Standards shape |
English PDF |
| GB/T 26303.2-2010 |
Measuring methods for dimensions and shapes of wrought copper and copper alloy - Part 2: Rod，wire and profile 铜及铜合金加工材外形尺寸检测方法 第2部分 棒、线、型材 |
China National Standards shape |
English PDF |
| GB/T 26303.1-2010 |
Measuring method for dimensions and shapes of wrought copper and copper alloy - Part 1: Tube 铜及铜合金加工材外形尺寸检测方法 第1部分 管材 |
China National Standards shape |
English PDF |
| GB/Z 16656.1009-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 1009: Application module: shape appearance and layers 工业自动化系统与集成 产品数据表达与交换 第1009 部分：应用模块：形状外观和层 |
China National Standards shape |
English PDF |
| GB/Z 16656.1004-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 1004: Application module: Elemental geometric shape 工业自动化系统与集成 产品数据表达与交换 第1004部分：应用模块：基本几何形状 |
China National Standards shape |
English PDF |
| GB/T 25895.2-2010 |
Water safety signs and beach safety flags - Part2: Specifications for beach safety flags - Colour, shape, meaning and performance 水域安全标志和沙滩安全旗 第2部分：沙滩安全旗颜色、形状、含义及性能的规范 |
China National Standards shape |
English PDF |
| GB/T 25822-2010 |
shaped and round seamless steel tubes for axle 车轴用异型及圆形无缝钢管 |
China National Standards shape |
English PDF |
| GB/T 25052-2010 |
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions,shape and weight 连续热浸镀层钢板和钢带尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 15391-2010 |
Dimension,shape and tolerances for cold-rolled steel strips with a width less than 600mm 宽度小于600mm冷轧钢带的尺寸、外形及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 25020.2-2010 |
Steel pole for overhead contact system of electrified railway - Part 2：Square shape tube steel pole 电气化铁路接触网钢支柱 第2部分：方形钢管支柱 |
China National Standards shape |
English PDF |
| GB/T 24791.3-2009 |
Photography - Sensitometry of screen/film systems for medical radiography - Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography 摄影 医疗X射线成像用屏/片系统的感光测定 第3部分：乳腺X射线成像感光特性曲线形状、感光度与平均斜率的测定 |
China National Standards shape |
English PDF |
| GB/T 24791.1-2009 |
Photography - Sensitometry of screen/film systems for medical X-radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient 摄影 医疗X射线成像用屏/片系统的感光测定 第1部分：感光特性曲线形状、感光度与平均斜率的测定 |
China National Standards shape |
English PDF |
| GB 24627-2009 |
Standard specification for wrought nickel-titanium shape memory alloys for medical devices and surgical implants 医疗器械和外科植入物用镍-钛形状记忆合金加工材 |
China National Standards shape |
English PDF |
| GB/T 14981-2009 |
Dimension，shape，mass and tolerance for hot-rolled round wire rod 热轧圆盘条尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 15006-2009 |
General rules of dimensions，shape,surface quality, test method and inspection for elastic alloys 弹性合金的尺寸、外形、表面质量、试验方法和检验规则的一般规定 |
China National Standards shape |
English PDF |
| GB/T 6409.2-2009 |
Superabrasives - Diamond or cubic boron nitride grinding tools - shapes and dimensions 超硬磨料制品 金刚石或立方氮化硼磨具 形状和尺寸 |
China National Standards shape |
English PDF |
| GB/T 23614.2-2009 |
Chemical analysis methods for titanium nickel shape memory alloy - Part 2: Determination of cobalt, copper, chromium, iron, niobium content - Inductively coupled plasma atomic emission spectrometry 钛镍形状记忆合金化学分析方法 第2部分：钴、铜、铬、铁、铌量的测定 电感耦合等离子体发射光谱法 |
China National Standards shape |
English PDF |
| GB/T 23614.1-2009 |
Methods for chemical analysis of titanium nickel shape memory alloy - Part 1: Determination of nickel content - Dimethylglyoxime precipitate separatioin－EDTA complex-zinc chloride back titration 钛镍形状记忆合金化学分析方法 第1部分：镍量的测定 丁二酮肟沉淀分离－EDTA络合-氯化锌返滴定法 |
China National Standards shape |
English PDF |
| GB/T 3917.5-2009 |
Textiles - Tear properties of fabrics - Part 5: Determination of tear force of wing-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第5部分：翼形试样(单缝)撕破强力的测定 |
China National Standards shape |
English PDF |
| GB/T 3917.4-2009 |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) 纺织品 织物撕破性能 第4部分：舌形试样（双缝）撕破强力的测定 |
China National Standards shape |
English PDF |
| GB/T 3917.3-2009 |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of trapezoid-shaped test specimens 纺织品 织物撕破性能 第3部分：梯形试样撕破强力的测定 |
China National Standards shape |
English PDF |
| GB/T 3917.2-2009 |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第2部分：裤形试样（单缝）撕破强力的测定 |
China National Standards shape |
English PDF |
| GB/T 16656.47-2008 |
Industrial automation systems and integration - Product data representation and exchange - Part 47: Iintergrated generic resources: shape variation tolerances 工业自动化系统与集成 产品数据表达与交换 第47部分：集成通用资源：形状变化公差 |
China National Standards shape |
English PDF |
| GB/T 908-2008 |
Forged bars - Dimensions, shape, weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 702-2008 |
Hot-rolled steel bars - Dimensions，shape，weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 6726-2008 |
Cold forming sectional steel for vehicles - Dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 6723-2008 |
Cold forming sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 21940-2008 |
Earth-moving machinery - Cutting edges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards shape |
English PDF |
| GB/T 17732-2008 |
Dense，shaped refractory products - Test methods for products containing carbon 致密定形含碳耐火制品试验方法 |
China National Standards shape |
English PDF |
| GB/T 17395-2008 |
Dimensions,shapes,masses,and tolerances of seamless steel tubes 无缝钢管尺寸、外形、重量及允许偏差 |
China National Standards shape |
English PDF |
| GB/T 18931-2008 |
Classification of basic dense shaped refractory products containing less than 7% residual carbon 残碳量小于7%的碱性致密定形耐火制品分类 |
China National Standards shape |
English PDF |
| Find out:139Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
