Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 16935.6-2016 |
Insulation coordination for equipment within low-voltage systems—Part 2-2: Interface considerations—Application guide 低压系统内设备的绝缘配合 第2-2部分：交界面考虑 应用指南 |
China National Standards t |
 English PDF |
| GB/T 6084-2016 |
Gear hobs—the general technical specification 齿轮滚刀 通用技术条件 |
China National Standards t |
English PDF |
| GB/T 6083-2016 |
the basic types and dimensions of gear hobs 齿轮滚刀 基本型式和尺寸 |
China National Standards t |
English PDF |
| GB/T 6078-2016 |
Centre drills 中心钻 |
China National Standards t |
English PDF |
| GB/T 6046-2016 |
Analogue quartz clocks 指针式石英钟 |
China National Standards t |
English PDF |
| GB/T 6044-2016 |
Analogue quartz watches 指针式石英手表 |
China National Standards t |
English PDF |
| GB/T 5959.11-2016 |
Safety in electroheat installations—Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals 电热装置的安全 第11部分：对液态金属电磁力作用装置的特殊要求 |
China National Standards t |
English PDF |
| GB/T 4854.9-2016 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件 |
China National Standards t |
English PDF |
| GB/T 4831-2016 |
Specification for model of rotating electrical motor 旋转电机产品型号编制方法 |
China National Standards t |
English PDF |
| GB/T 3797-2016 |
Electrical control assemblies 电气控制设备 |
China National Standards t |
English PDF |
| GB/T 3767-2016 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 反射面上方近似自由场的工程法 |
China National Standards t |
English PDF |
| GB/T 3667.2-2016 |
AC motor capacitors—Part 2：Motor start capacitors 交流电动机电容器 第2部分：电动机起动电容器 |
China National Standards t |
English PDF |
| GB/T 3667.1-2016 |
AC motor capacitors—Part 1: General—Performance, testing and rating—Safety requirements—Guide for installation and operation 交流电动机电容器 第1部分：总则 性能、试验和额定值 安全要求 安装和运行导则 |
China National Standards t |
English PDF |
| GB/T 32620.2-2016 |
Lead-acid batteries used for electric road vehicles—Part 2: Kinds of products and specifications 电动道路车辆用铅酸蓄电池 第2部分：产品品种和规格 |
China National Standards t |
English PDF |
| GB/T 32620.1-2016 |
Lead-acid batteries used for electric road vehicles—Part 1: Technical condition 电动道路车辆用铅酸蓄电池 第1部分：技术条件 |
China National Standards t |
English PDF |
| GB/T 32567-2016 |
Blast wheel 抛丸器 |
China National Standards t |
English PDF |
| GB/T 32566-2016 |
Welded stainless steel cylinders 不锈钢焊接气瓶 |
China National Standards t |
English PDF |
| GB/T 32558-2016 |
Reduction sleeves with 7/24 external and Morse internal taper 带7:24外圆锥和莫氏内圆锥的缩柄套 |
China National Standards t |
English PDF |
| GB/T 32557.2-2016 |
Polygonal taper interface with flange contact surface—Part 2: Dimensions and designation of receivers 带有法兰接触面的多棱锥接口 第2部分：安装孔尺寸和标记 |
China National Standards t |
English PDF |
| GB/T 32557.1-2016 |
Polygonal taper interface with flange contact surface—Part 1: Dimensions and designation of shanks 带有法兰接触面的多棱锥接口 第1部分：柄部尺寸和标记 |
China National Standards t |
English PDF |
| GB/T 32556.3-2016 |
Cutter arbors with tenon drive—Part 3: Dimensions of hollow taper interface with flange contact surface 带端键传动的铣刀杆 第3部分：带法兰接触面的空心锥柄的铣刀杆尺寸 |
China National Standards t |
English PDF |
| GB/T 32556.2-2016 |
Cutter arbors with tenon drive—Part 2: Dimensions of 7:24 taper 带端键传动的铣刀杆 第2部分：带7:24锥柄的铣刀杆尺寸 |
China National Standards t |
English PDF |
| GB/T 32556.1-2016 |
Cutter arbors with tenon drive—Part 1: Dimension of Morse taper 带端键传动的铣刀杆 第1部分：带莫氏锥柄的铣刀杆尺寸 |
China National Standards t |
English PDF |
| GB/T 32544-2016 |
Acoustic emission examination and evaluation methods of steel structures of bridge and gantry cranes 桥式与门式起重机金属结构声发射检测及结果评定方法 |
China National Standards t |
English PDF |
| GB/T 32541-2016 |
Quality control systems for heat treatment 热处理质量控制体系 |
China National Standards t |
English PDF |
| GB/T 32540-2016 |
technical requirements for accuracy-controlled gas nitriding heat treatment 精密气体渗氮热处理技术要求 |
China National Standards t |
English PDF |
| GB/T 32539-2016 |
High temperature carburizing 高温渗碳 |
China National Standards t |
English PDF |
| GB/T 32538.2-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 2: Coupling ring 40 with socket 农业车辆 被牵引车辆的机械连接装置 第2部分：带座孔的40连接环 |
China National Standards t |
English PDF |
| GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross section 农业车辆 被牵引车辆的机械连接装置 第1部分：50mm/30mm横截面的挂接环尺寸 |
China National Standards t |
English PDF |
| GB/T 32537-2016 |
Runouts, undercuts and chamfers for trapezoidal and buttress threads 梯形和锯齿形螺纹收尾、肩距、退刀槽和倒角 |
China National Standards t |
English PDF |
| GB/T 32536-2016 |
test method for feed mixers 饲料混合机试验方法 |
China National Standards t |
English PDF |
| GB/T 32535-2016 |
Runouts, undercuts and chamfers for pipe threads 管螺纹收尾、肩距、退刀槽和倒角 |
China National Standards t |
English PDF |
| GB/T 32534-2016 |
test methods for taper screw threads 圆锥螺纹检测方法 |
China National Standards t |
English PDF |
| GB/T 32533-2016 |
Covered electrodes for manual metal arc welding of high-strength steels 高强钢焊条 |
China National Standards t |
English PDF |
| GB/T 32532-2016 |
Nonconsumable tungsten electrodes for arc welding and cutting 焊接与切割用钨极 |
China National Standards t |
English PDF |
| GB/T 32531-2016 |
Printing machinery—Violet laster digital direct plate setter 印刷机械 紫激光型数字直接制版机 |
China National Standards t |
English PDF |
| GB/T 32530-2016 |
Machinery for forestry—Saw chain shot guarding systems—Test method and performance criteria 林业机械 锯链甩射防护系统 试验方法和性能要求 |
China National Standards t |
English PDF |
| GB/T 32529-2016 |
technical requirement of cleaning liquid waste recycling and emissions for heat treatment 热处理清洗废液回收及排放技术要求 |
China National Standards t |
English PDF |
| GB/T 32528-2016 |
Printing machinery—hard-cover book binding line 印刷机械 精装书籍联动线 |
China National Standards t |
English PDF |
| GB/T 32527-2016 |
Design specification of space materials science experimental facility—Multifunctional high temperature furnace 空间材料科学实验装置 多功能高温炉设计规范 |
China National Standards t |
English PDF |
| GB/T 32526-2016 |
General specification for the equipment of passing azimuth angle vertically 方位垂直传递装置通用规范 |
China National Standards t |
English PDF |
| GB/T 32525-2016 |
General specification for photoelectric tracking and measuring equipment 光电跟踪测量设备通用规范 |
China National Standards t |
English PDF |
| GB/T 32524.2-2016 |
Acoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分：反射面上方近似自由场的工程法 |
China National Standards t |
English PDF |
| GB/T 32524.1-2016 |
Acoustics—Determination of sound power level and directivity character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分：半消声室精密法 |
China National Standards t |
English PDF |
| GB/T 32523-2016 |
Acoustics—Measurement of sound pressure reflection coefficient, sound pressure transmission coefficient and absorption coefficient for underwater acoustical material sample—Travelling wave tube method 声学 水声材料样品声压反射系数、声压透射系数和吸声系数的测量 行波管法 |
China National Standards t |
English PDF |
| GB/T 32522-2016 |
Acoustics—Electroacoustic characteristics and measurements of spherically focusing ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards t |
English PDF |
| GB/T 32521-2016 |
Subdivision and numbering for the lunar primary scale topographic maps 月球基本比例尺地形图分幅和编号 |
China National Standards t |
English PDF |
| GB/T 32520-2016 |
Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV 交流1 kV以上架空输电和配电线路用带外串联间隙金属氧化物避雷器（EGLA） |
China National Standards t |
English PDF |
| GB/T 32518.1-2016 |
Field test code of controlled shunt reactor of extra high voltage—Part 1: Multistage controlled shunt reactor 超高压可控并联电抗器现场试验技术规范 第1部分：分级调节式 |
China National Standards t |
English PDF |
| GB/T 32517-2016 |
Installation couplers intended for permanent connection in fixed installations 固定装置中永久性连接用安装式耦合器 |
China National Standards t |
English PDF |
| GB/T 32516-2016 |
thyristor valves of multistage controlled shunt reactors in extra high-voltage transmission systems 超高压分级式可控并联电抗器晶闸管阀 |
China National Standards t |
English PDF |
| GB/T 32515-2016 |
Variable-frequency drive for injection molding machine 注塑机专用变频调速设备 |
China National Standards t |
English PDF |
| GB/T 32514.5-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 5: Verification of welding current measuring system 电阻焊 焊接电流的测量 第5部分：焊接电流测量系统的确认 |
China National Standards t |
English PDF |
| GB/T 32514.4-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 4: Calibration system 电阻焊 焊接电流的测量 第4部分：校准系统 |
China National Standards t |
English PDF |
| GB/T 32514.3-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 3: Current sensing coil 电阻焊 焊接电流的测量 第3部分：电流感应线圈 |
China National Standards t |
English PDF |
| GB/T 32514.2-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 2: Welding current meter with current sensing coil 电阻焊 焊接电流的测量 第2部分：带电流感应线圈的焊接电流测量仪 |
China National Standards t |
English PDF |
| GB/T 32514.1-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 1: Guidelines for measurement 电阻焊 焊接电流的测量 第1部分：测量指南 |
China National Standards t |
English PDF |
| GB/T 32512-2016 |
technical requirements for protection of photovoltaic power station against lightning 光伏发电站防雷技术要求 |
China National Standards t |
English PDF |
| GB/T 32511-2016 |
General technical requirements for electromagnetic shielding plastic 电磁屏蔽塑料通用技术要求 |
China National Standards t |
English PDF |
| GB/T 32510-2016 |
Guide for pumped storage power plant identification system 抽水蓄能电厂标识系统（KKS）编码导则 |
China National Standards t |
English PDF |
| GB/T 32509-2016 |
General specification for vanadium flow battery 全钒液流电池通用技术条件 |
China National Standards t |
English PDF |
| GB/T 32508-2016 |
Quantitative determination of corrosive sulfur (dibenzyl disulfide , DBDS) in insulating liquids 绝缘油中腐蚀性硫（二苄基二硫醚）定量检测方法 |
China National Standards t |
English PDF |
| GB/T 32507-2016 |
Power quality—Terms 电能质量 术语 |
China National Standards t |
English PDF |
| GB/T 32506-2016 |
Code for operation and maintenance for excitation system of pumped-storage unit 抽水蓄能机组励磁系统运行检修规程 |
China National Standards t |
English PDF |
| GB/T 32505-2016 |
Variable-frequency drive for machine tool 机床专用变频调速设备 |
China National Standards t |
English PDF |
| GB/T 32504-2016 |
Civil lead-acid battery technical code for safety 民用铅酸蓄电池安全技术规范 |
China National Standards t |
English PDF |
| GB/T 32503.1-2016 |
Household and similar adjustable frequency converter safety—Part 1: General requirements 家用和类似用途变频控制器的安全 第1部分：通用要求 |
China National Standards t |
English PDF |
| GB/T 32502-2016 |
Overhead electrical stranded conductors composite core supported/reinforced 复合材料芯架空导线 |
China National Standards t |
English PDF |
| GB/T 32499-2016 |
Connecting devices—Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units 连接器件 任何材料的夹紧件用铝线的连接器件及铝基夹紧件用铜线的连接器件 |
China National Standards t |
English PDF |
| GB/T 32487-2016 |
General technical requirements for plastic furniture 塑料家具通用技术条件 |
China National Standards t |
English PDF |
| GB/T 32486-2016 |
General specification for LED luminaries of stage 舞台LED灯具通用技术要求 |
China National Standards t |
English PDF |
| GB/T 32485-2016 |
Methods of evaluation of the battery life of a battery-powered watch 电池驱动手表的电池寿命的评估方法 |
China National Standards t |
English PDF |
| GB/T 32484-2016 |
Watch-cases and accessories—Vapour phase deposited coatings 表壳体及其附件 气相沉积镀层 |
China National Standards t |
English PDF |
| GB/T 32483.3-2016 |
Energy performance of lamp controlgear—Part 3: Controlgear for halogen lamps and LED modules—Method of measurement to determine the efficiency of the controlgear 灯控制装置的效率要求 第3部分：卤钨灯和LED模块 控制装置效率的测量方法 |
China National Standards t |
English PDF |
| GB/T 32482.1-2016 |
LED—Binning—Part 1: General requirements and white colour grid LED 分选 第1部分：一般要求和白光栅格 |
China National Standards t |
English PDF |
| GB/T 32481-2016 |
Performance requirements of LED luminaires for tunnel lighting 隧道照明用LED灯具性能要求 |
China National Standards t |
English PDF |
| GB/T 32480-2016 |
textile machinery—Mixing bale openers for cotton spinning—Vocabulary and principles of construction 纺织机械 棉纺用开包混棉机 术语、定义和结构原理 |
China National Standards t |
English PDF |
| GB/T 32479-2016 |
General safety technical requirements for recycled fiber 再加工纤维基本安全技术要求 |
China National Standards t |
English PDF |
| GB/T 32478-2016 |
Household and similar electrical appliances method of measuring performance —Assessment of repeatability and reproducibility 家用和类似用途电器性能测试方法 重复性和再现性评价 |
China National Standards t |
English PDF |
| GB/T 32477-2016 |
Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定 |
China National Standards t |
English PDF |
| GB/T 32476-2016 |
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 |
China National Standards t |
English PDF |
| GB/T 32475-2016 |
Rubber hose and hose assemblies for coal seam water injection,gas drainage and drilling plugging 煤层注水、钻孔封堵及瓦斯排放橡胶软管和软管组合件 |
China National Standards t |
English PDF |
| GB/T 32474-2016 |
Rubber hoses and hose assemblies for petroleum drilling well control equipments 石油钻井井控设备用橡胶软管及软管组合件 |
China National Standards t |
English PDF |
| GB/T 32473-2016 |
Ion exchange resins for condensate polishing treatment 凝结水精处理用离子交换树脂 |
China National Standards t |
English PDF |
| GB/T 32472-2016 |
D113 macroporous weak acid acrylic type cation exchange resins D113大孔弱酸性丙烯酸系阳离子交换树脂 |
China National Standards t |
English PDF |
| GB/T 32471-2016 |
Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯异构比的测定 |
China National Standards t |
English PDF |
| GB/T 32469-2016 |
Plastics—Polyurethane raw materials—Toluene diisocyanates 塑料 聚氨酯原料 甲苯二异氰酸酯 |
China National Standards t |
English PDF |
| GB/T 6882-2016 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for anechoic rooms and hemi-anechoic rooms 声学 声压法测定噪声源声功率级和声能量级 消声室和半消声室精密法 |
China National Standards t |
English PDF |
| GB/T 5587-2016 |
Basic shapes,dimensions,symbols and notations of silver based electrical contacts 银基电触头基本形状、尺寸、符号及标注 |
China National Standards t |
English PDF |
| GB/T 5586-2016 |
test methods for essential property of electrical contact materials 电触头材料基本性能试验方法 |
China National Standards t |
English PDF |
| GB/T 31897.201-2016 |
Luminaire performance—Part 2-1: Particular requirements for LED luminaires 灯具性能 第2-1部分：LED灯具特殊要求 |
China National Standards t |
English PDF |
| GB/T 31052.7-2016 |
Lifting appliances—Code of inspection and maintenance—Part 7: Derrick cranes 起重机械 检查与维护规程 第7部分：桅杆起重机 |
China National Standards t |
English PDF |
| GB/T 31052.10-2016 |
Lifting appliances—Code of inspection and maintenance—Part 10: Series lifting equipments 起重机械 检查与维护规程 第10部分：轻小型起重设备 |
China National Standards t |
English PDF |
| GB/T 2970-2016 |
Method for ultrasonic testing of thicker steel plates 厚钢板超声检测方法 |
China National Standards t |
English PDF |
| GB/T 2900.20-2016 |
Electrotechnical terminology High-voltage switchgear and controlgear 电工术语 高压开关设备和控制设备 |
China National Standards t |
English PDF |
| GB/T 25774.2-2016 |
test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验 |
China National Standards t |
English PDF |
| GB/T 2550-2016 |
Gas welding equipment—Rubber hoses for welding, cutting and allied processes 气体焊接设备 焊接、切割和类似作业用橡胶软管 |
China National Standards t |
English PDF |
| GB/T 23724.1-2016 |
Cranes—Inspections—Part 1: General 起重机 检查 第1部分：总则 |
China National Standards t |
English PDF |
| GB/T 22715-2016 |
Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines 旋转交流电机定子成型线圈耐冲击电压水平 |
China National Standards t |
English PDF |
| GB/T 20835-2016 |
Guides for magnetization test of generator stator core 发电机定子铁心磁化试验导则 |
China National Standards t |
English PDF |
| Find out:54692Items | To Page of: First -Previous-Next -Last | [202] [203] [204] [205] [206] [207] [208] |
+86-755-25831330
