Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6404.2-2005 |
Acceptance code for gear units-Part2:Determination of mechanical vibrations of gear units during acceptance testing 齿轮装置的验收规范 第2部分：验收试验中齿轮装置机械振动的测定 |
China National Standards t |
 English PDF |
| GB/T 6404.1-2005 |
Acceptance code for gear units-Part1:Test code for airborne sound 齿轮装置的验收规范 第1部分：空气传播噪声的试验规范 |
China National Standards t |
English PDF |
| GB/T 4307-2005 |
Lifting hook-Nomenclature 起重吊钩 术语 |
China National Standards t |
English PDF |
| GB/T 3871.12-2005 |
Agricultural Tractors-Test procedures-Part 12:Working Tests 农业拖拉机 试验规程 第12部分 使用试验 |
China National Standards t |
English PDF |
| GB/T 3871.11-2005 |
Agricultural tractors-Test procedures-Part 11:Suitability tests for hot atmosphere 农业拖拉机 试验规程 第11部分：高温性能试验 |
China National Standards t |
English PDF |
| GB/T 3452.3-2005 |
Housing dimensions for O-ring elastomer seals in hydraulic and pneumatic applications 液压气动用O形橡胶密封圈 沟槽尺寸 |
China National Standards t |
English PDF |
| GB/T 3216-2005 |
Rotodynamic pumps-Hdraulic peformance acceptance tests-Grades 1 and 2 回转动力泵 水力性能验收试验 1级和2级 |
China National Standards t |
English PDF |
| GB/T 6826-2005 |
Serial type of mineral processing equipment 洗选设备 系列型谱 |
China National Standards t |
English PDF |
| GB/T 2353-2005 |
Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors 液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号 |
China National Standards t |
English PDF |
| GB/T 19956.2-2005 |
Positive-displacement cacuum pumps-Measurement of performance characteristics Part2:Measurement of ultimate pressure 容积真空泵性能测量方法 第2部分：极限压力的测量 |
China National Standards t |
English PDF |
| GB/T 19956.1-2005 |
Positive-displacement cacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 容积真空泵性能测量方法 第1部分：体积流率（抽速）的测量 |
China National Standards t |
English PDF |
| GB/T 19955.2-2005 |
Vapour vacuum pumps-Measurement of performance characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分：临界前级压力的测量 |
China National Standards t |
English PDF |
| GB/T 19955.1-2005 |
Vapour vacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分：体积流率（抽速）的测量 |
China National Standards t |
English PDF |
| GB/T 19943-2005 |
Non-destructive testing-Radiographic examination of metallic materials by X-and gamma-rays-Basic rules 无损检测 金属材料X和伽玛射线 照相检测 基本规则 |
China National Standards t |
English PDF |
| GB/T 19939-2005 |
technical Requirements for Crid Connection of PV System 光伏系统并网技术要求 |
China National Standards t |
English PDF |
| GB/T 19936.1-2005 |
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards t |
English PDF |
| GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards t |
English PDF |
| GB/T 19934.1-2005 |
Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法 |
China National Standards t |
English PDF |
| GB/T 19932-2005 |
Earth-moving machinery-Hydraulic excavators-Laboratory tests and performance requirements for operator protective guards 土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求 |
China National Standards t |
English PDF |
| GB/T 19931-2005 |
Earth-moving machinery-Trenchers-Definitions and commercial specifications 土方机械 挖沟机 术语和商业规范 |
China National Standards t |
English PDF |
| GB/T 19930-2005 |
Earth-moving machinery-Tip-Over Protection Structure(TOPS)for compact excavators-Laboratory tests and performance requirements 土方机械 小型挖掘机 倾翻保护结构的试验室试验和性能要求 |
China National Standards t |
English PDF |
| GB/T 19928-2005 |
Earth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom 土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量 |
China National Standards t |
English PDF |
| GB/T 19927-2005 |
Cranked-link drag chains of welded construction,attachments and sprockets 曳引用焊接结构弯板链、附件和链轮 |
China National Standards t |
English PDF |
| GB/T 19926-2005 |
Hydraulic fluid power-Gas-loaded accumulators-Dimensions of gas port 液压传动 充气式蓄能器 气口尺寸 |
China National Standards t |
English PDF |
| GB/T 19925-2005 |
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards t |
English PDF |
| GB/T 19924-2005 |
Mobile cranes-Determination of stability 流动式起重机 稳定性的确定 |
China National Standards t |
English PDF |
| GB/T 19922-2005 |
Standard test methods for measuring site flatness on silicon wafers by noncontact scanning 硅片局部平整度非接触式标准测试方法 |
China National Standards t |
English PDF |
| GB/T 19921-2005 |
test method of particles on silicon wafer surfaces 硅抛光片表面颗粒测试方法 |
China National Standards t |
English PDF |
| GB/T 1883.2-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance 往复式内燃机 词汇 第2部分：发动机维修术语 |
China National Standards t |
English PDF |
| GB/T 1883.1-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation 往复式内燃机 词汇 第1部分：发动机设计和运行术语 |
China National Standards t |
English PDF |
| GB/T 15822.3-2005 |
Non-destructive testing-Magnetic particle testing-Part 3:Equipment 无损检测 磁粉检测 第3部分：设备 |
China National Standards t |
English PDF |
| GB/T 15822.2-2005 |
Non-desstructive testing-Magnetic particle testing-Part 2:Detection media 无损检测 磁粉检测 第2部分：检测介质 |
China National Standards t |
English PDF |
| GB/T 15822.1-2005 |
Non-destructive testing-Magnetic particle testing-Part 1:General principles 无损检测 磁粉检测 第1部分：总则 |
China National Standards t |
English PDF |
| GB/T 15390-2005 |
Cranked-link mill chains of welded construction,attachments and sprockets 工程用焊接结构弯板链、附件和链轮 |
China National Standards t |
English PDF |
| GB/T 15113-2005 |
Dispatching winch 调度绞车 |
China National Standards t |
English PDF |
| GB/T 13401-2005 |
Steel plate butt-welding pipe fittings 钢板制对焊管件 |
China National Standards t |
English PDF |
| GB/T 12965-2005 |
Monocrystalline silicon as cut slices and lapped slices 硅单晶切割片和研磨片 |
China National Standards t |
English PDF |
| GB/T 12962-2005 |
Monoccrystalline silicon 硅单晶 |
China National Standards t |
English PDF |
| GB/T 12604.2-2005 |
Non-destructive testing-Terminology-Terms used in radiographic testing 无损检测 术语 射线照相检测 |
China National Standards t |
English PDF |
| GB/T 12225-2005 |
General purpose industrial valves-Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards t |
English PDF |
| GB/T 12224-2005 |
General requirements for industrial steel valves 钢制阀门 一般要求 |
China National Standards t |
English PDF |
| GB/T 10913-2005 |
Earth-woving machinery-Determination of ground speed 土方机械 行驶速度测定 |
China National Standards t |
English PDF |
| GB/T 10857-2005 |
Steel roller chains,types S and C,attachments and sprockets S型和C型钢制滚子链条，附件和链轮 |
China National Standards t |
English PDF |
| GB/T 10598.2-2005 |
Industrial test method of open-cut mine rotary blast hole drill 露天矿用牙轮钻机和旋转钻机 工业试验方法 |
China National Standards t |
English PDF |
| GB/T 10598.1-2005 |
Open-cut mine rotary blast hole drill 露天矿用牙轮钻机和旋转钻机 |
China National Standards t |
English PDF |
| GB/T 9769-2005 |
Rim contour measure 轮辋轮廓检测 |
China National Standards t |
English PDF |
| GB/T 7985-2005 |
Conveyor belts -- Method for the determination of the tear propagation resistance of textile conveyor belts 输送带 织物芯输送带抗撕裂扩大性试验方法 |
China National Standards t |
English PDF |
| GB/T 5754.2-2005 |
Steel cord conveyor belt -- Longitudinal test -- Part 2: Measurement of tensile strength 钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定 |
China National Standards t |
English PDF |
| GB/T 3515-2005 |
Rubber -- Determination of carbon black content -- Pyrolytic method 橡胶 炭黑含量的测定 热解法 |
China National Standards t |
English PDF |
| GB/T 3487-2005 |
Rim contour for motor vehicles 汽车轮辋规格系列 |
China National Standards t |
English PDF |
| GB/T 3402.1-2005 |
Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分：命名体系和规范基础 |
China National Standards t |
English PDF |
| GB/T 20029-2005 |
Rubber isolation bearings for instruments and equipments 仪器 设备用橡胶隔震垫 |
China National Standards t |
English PDF |
| GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards t |
English PDF |
| GB/T 20027-2005 |
Rubber-or plastics-coated fabrics -- Determiation of bursting strength 橡胶或塑料涂覆织物 破裂强度的测定 |
China National Standards t |
English PDF |
| GB/T 20026-2005 |
Rubber and plastics hose -- Determination of abrasion of lining 橡胶和塑料软管 内衬层耐磨性测定 |
China National Standards t |
English PDF |
| GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards t |
English PDF |
| GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards t |
English PDF |
| GB/T 20023-2005 |
Rubber and/or plastics hoses and hoses assemblies for airless paint spraying 无气喷涂用橡胶和/或塑料软管及软管组合件 |
China National Standards t |
English PDF |
| GB/T 20022-2005 |
Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards t |
English PDF |
| GB/T 20021-2005 |
Heat resistant conveyor belts of duck construction 帆布芯耐热输送带 |
China National Standards t |
English PDF |
| GB/T 1695-2005 |
Rubber,vulcanized -- Determination of electrical breakdown strength and voltage resistant at commercial power frequency 硫化橡胶 工频击穿电压强度和耐电压的测定方法 |
China National Standards t |
English PDF |
| GB/T 3903.7-2005 |
Footwear-Ageing conditioning 鞋类通用试验方法-老化处理 |
China National Standards t |
English PDF |
| GB/T 3903.14-2005 |
Footwear-Test methods for outsoles-Needle tear strength 鞋类-外底试验方法-针撕破强度 |
China National Standards t |
English PDF |
| GB/T 3903.13-2005 |
Footwear-Test methods for outsoles-Dimensional stability 鞋类-外底试验方法-尺寸稳定性 |
China National Standards t |
English PDF |
| GB/T 3903.12-2005 |
Footwear-Test methods for outsoles-Tear strengh 鞋类-外底试验方法-撕裂强度 |
China National Standards t |
English PDF |
| GB/T 3903.11-2005 |
Footwear-Test methods for insoles,lining and insocks-perspiration resistance 鞋类-内底、衬里和内垫试验方法-耐汗性 |
China National Standards t |
English PDF |
| GB/T 3903.10-2005 |
Footwear-Test methods for insoles-Dimensional stability 鞋类-内底试验方法-尺寸稳定性 |
China National Standards t |
English PDF |
| GB/Z 19027-2005 |
Guidance on statistical techniques for GB/T19001-2000 GB/T19001-2000的统计技术指南 |
China National Standards t |
English PDF |
| GB/T 20032-2005 |
Project risk management -- Application guidelines 项目风险管理 应用指南 |
China National Standards t |
English PDF |
| GB/T 19016-2005 |
Quality management systems -- Guidelines for quality management in projects 质量管理体系 项目质量管理指南 |
China National Standards t |
English PDF |
| GB 19891-2005 |
Safety of machinery-Hygiene requirements for the design of machinery 机械安全 机械设计的卫生要求 |
China National Standards t |
English PDF |
| GB/T 19920-2005 |
Container buttress fitting for ships 船用集装箱支撑件 |
China National Standards t |
English PDF |
| GB/T 19919-2005 |
Small craft-Windows,portlights,hatches,deadlights and doors Strength and watertightness requirements 小艇 窗、舷窗、舱口盖、风暴盖和门 强度和密封性要求 |
China National Standards t |
English PDF |
| GB/T 19918-2005 |
Small craft-Graphical symbols 小艇 图形符号 |
China National Standards t |
English PDF |
| GB/T 19917-2005 |
Small craft-Owner’s manual 小艇 艇主手册 |
China National Standards t |
English PDF |
| GB/T 19916-2005 |
Small craft-Principal data 小艇 主要数据 |
China National Standards t |
English PDF |
| GB/T 19912-2005 |
Safety code for the rubber-tyred transtainer 轮胎式集装箱门式起重机安全规程 |
China National Standards t |
English PDF |
| GB/T 19911-2005 |
Shipbuilding-Inland navigation-bucket Dredgers-Scale of bucket capacities 造船 内河 链斗挖泥船挖斗容量标定 |
China National Standards t |
English PDF |
| GB/T 19910-2005 |
technical requirements for electronic control system of motor-vehicles engine being overhauled 汽车发动机电子控制系统修理技术要求 |
China National Standards t |
English PDF |
| GB/T 19905-2005 |
Liquefied gas tanker 液化气体运输车 |
China National Standards t |
English PDF |
| GB/T 19904-2005 |
Electrochemical oxygenmeter for medical hyperbaric oxygen chamber 医用氧舱用电化学式测氧仪 |
China National Standards t |
English PDF |
| GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards t |
English PDF |
| GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards t |
English PDF |
| GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards t |
English PDF |
| GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法 |
China National Standards t |
English PDF |
| GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法 |
China National Standards t |
English PDF |
| GB/T 18570.5-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards t |
English PDF |
| GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards t |
English PDF |
| GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法 |
China National Standards t |
English PDF |
| GB/T 12130-2005 |
Mediccal hyperbaric chamber pressurized with air 医用空气加压氧舱 |
China National Standards t |
English PDF |
| GB/T 10868-2005 |
Steam converting valve for power stations 电站减温减压阀 |
China National Standards t |
English PDF |
| GB 9193-2005 |
Acoustic,optical alarm signals and identifying indications in ships 船舶声光报警信号和识别标志 |
China National Standards t |
English PDF |
| GB 5908-2005 |
flame arresters for petroleum tanks 石油储罐阻火器 |
China National Standards t |
English PDF |
| GB 3445-2005 |
Indoor fire hydrant 室内消火栓 |
China National Standards t |
English PDF |
| GB 3033.2-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 2:Additional colours for different media and/or functions 船舶与海上技术 管路系统内含物的识别颜色 第2部分：不同介质和(或)功能的附加颜色 |
China National Standards t |
English PDF |
| GB 3033.1-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 1:Main colours and media 船舶与海上技术 管路系统内含物的识别颜色 第1部分：主颜色和介质 |
China National Standards t |
English PDF |
| GB 5226.4-2005 |
Safety of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems 机械安全 机械电气设备 第31部分：缝纫机、缝制单元和缝制系统的特殊安全和EMC要求 |
China National Standards t |
English PDF |
| GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分：电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards t |
English PDF |
| GB/T 8338-2005 |
Camera shutters 照相机快门 |
China National Standards t |
English PDF |
| GB/T 6148-2005 |
test method for temperature-resistance coefficient of precision resistance alloys 精密电阻合金电阻温度系数测试方法 |
China National Standards t |
English PDF |
| Find out:54692Items | To Page of: First -Previous-Next -Last | [454] [455] [456] [457] [458] [459] [460] |
+86-755-25831330
