GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 6227.2-2005 |
Food Additive Sunset Yellow Aluminum Lake 食品添加剂 日落黄铝色淀 |
China National Standards t |
English PDF |
GB 6226-2005 |
Food additive-Calcium lactate 食品添加剂 乳酸钙 |
China National Standards t |
English PDF |
GB 4479.2-2005 |
Food additive Amaranth aluminum lake 食品添加剂 苋菜红铝色淀 |
China National Standards t |
English PDF |
GB 19825-2005 |
Food additive-Diluted benzoyl peroxide 食品添加剂 稀释过氧化苯甲酰 |
China National Standards t |
English PDF |
GB 1904-2005 |
Food additive Sodium carboxymethyl cellulose 食品添加剂 羧甲基纤维素钠 |
China National Standards t |
English PDF |
GB 1902-2005 |
Food additive-Sodium benzoata 食品添加剂 苯甲酸钠 |
China National Standards t |
English PDF |
GB 1901-2005 |
Food additive-Benzoic acid 食品添加剂 苯甲酸 |
China National Standards t |
English PDF |
GB 1894-2005 |
Food additive Anhydrous sodium sulphite 食品添加剂 无水亚硫酸钠 |
China National Standards t |
English PDF |
GB 1890-2005 |
Food additive Sodium hexametaphosphate 食品添加剂 六偏磷酸钠 |
China National Standards t |
English PDF |
GB 15961-2005 |
Food additive Monascus color 食品添加剂 红曲红 |
China National Standards t |
English PDF |
GB 10617-2005 |
Food additive—Sucrose fatly acid ester (method of propylene glycol) 食品添加剂 蔗糖脂肪酸酯 (丙二醇法) |
China National Standards t |
English PDF |
GB/T 19817-2005 |
textiles-Fabrics for furnishings 纺织品 装饰用织物 |
China National Standards t |
English PDF |
GB 19790.2-2005 |
Disposable Bamboo Chopsticks 一次性筷子 第2部分:竹筷 |
China National Standards t |
English PDF |
GB 19790.1-2005 |
Disposable Wooden Chopsticks 一次性筷子 第1部分:木筷 |
China National Standards t |
English PDF |
GB 19815-2005 |
Safety Requirements for Centrifuge 离心机 安全要求 |
China National Standards t |
English PDF |
GB 19814-2005 |
Safety Requirements for Separator 分离机 安全要求 |
China National Standards t |
English PDF |
GB/T 6463-2005 |
Metallic and other inorganic coatings-Review of methods of measurement of thickness 金属和其它无机覆盖层厚度测量方法评述 |
China National Standards t |
English PDF |
GB/T 6462-2005 |
Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method 金属和氧化物覆盖层 厚度测量 显微镜法 |
China National Standards t |
English PDF |
GB/T 5270-2005 |
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 |
China National Standards t |
English PDF |
GB/T 19824-2005 |
thermal spraying-Approval testing of thermal sprayers 热喷涂 热喷涂操作人员考核要求 |
China National Standards t |
English PDF |
GB/T 19823-2005 |
thermal spraying procedures for the application of thermally sprayed coating for engineering components 热喷涂 工程零件热喷涂涂层的应用步骤 |
China National Standards t |
English PDF |
GB/T 19822-2005 |
Specification for hard anodic oxidation coatings on aluminium and its alloys 铝及铝合金硬质阳极氧化膜规范 |
China National Standards t |
English PDF |
GB/T 12612-2005 |
General specification for multifunctional solution of iron and steel surface treatment 多功能钢铁表面处理液通用技术条件 |
China National Standards t |
English PDF |
GB/T 12600-2005 |
Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials 金属覆盖层 塑料上镍+铬电镀层 |
China National Standards t |
English PDF |
GB/T 11378-2005 |
Metallic coatings-Measurement of coating thickness-Profilometric method 金属覆盖层 覆盖层厚度测量 轮廓仪法 |
China National Standards t |
English PDF |
GB/T 19820-2005 |
Hydraulic cotton bale press 液压棉花打包机 |
China National Standards t |
English PDF |
GB/T 19818-2005 |
Seed Cotton Cleaner 籽棉清理机 |
China National Standards t |
English PDF |
GB/T 19812.2-2005 |
Plastic equipment for water saving irrigation-Pressure compensating emitter and emitting pipe 塑料节水灌溉器材 压力补偿式滴头及滴灌管 |
China National Standards t |
English PDF |
GB/T 19812.1-2005 |
Plastic equipment for water saving irrigation-drip tape with labyrinth on one side 塑料节水灌溉器材 单翼迷宫式滴灌带 |
China National Standards t |
English PDF |
GB 5606.6-2005 |
Cigarettes-Quality Evaluation 卷烟 第6部分:质量综合判定 |
China National Standards t |
English PDF |
GB 5606.5-2005 |
Cigarettes-Mainstream smoke 卷烟 第5部分:主流烟气 |
China National Standards t |
English PDF |
GB 5606.4-2005 |
Cigarettes-Technical Requirements for Sense Evaluation 卷烟 第4部分:感官技术要求 |
China National Standards t |
English PDF |
GB 5606.3-2005 |
Cigarettes--Technical Requirements for Packing,Making,Storage and Transport 卷烟 第3部分:包装、卷制技术要求及贮运 |
China National Standards t |
English PDF |
GB 5606.2-2005 |
Cigarettes-mark 卷烟 第2部分:包装标识 |
China National Standards t |
English PDF |
GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards t |
English PDF |
GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards t |
English PDF |
GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards t |
English PDF |
GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards t |
English PDF |
GB/T 19813-2005 |
Solar energy raised pavement markers 太阳能突起路标 |
China National Standards t |
English PDF |
GB/T 11797-2005 |
the graphics symbols for the scene of road traffic accident 道路交通事故现场图形符号 |
China National Standards t |
English PDF |
GB/T 10752-2005 |
Marine steel butt-welding fittings 船用钢管对焊接头 |
China National Standards t |
English PDF |
GB/Z 19798-2005 |
Agricultural irrigation equipment-Automatic irrigation systems-Hydraulic control 农业灌溉设备 自动灌溉系统 水力控制 |
China National Standards t |
English PDF |
GB/T 8511-2005 |
Vibratory roller 振动压路机 |
China National Standards t |
English PDF |
GB/T 8094-2005 |
Equipment for harvesting-Combine harvesters-Determination and designation of grain tank capacity and unloading device performance 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards t |
English PDF |
GB/T 6979.2-2005 |
Equipment for harvesting-Combines and functional components Part 2:Assessment of characteristics and performance defined in vocabulary 收获机械 联合收割机及功能部件 第2部分:在词汇中定义的性能和特征评价 |
China National Standards t |
English PDF |
GB/T 6979.1-2005 |
Equipment for harvesting-Combines and functional components Part 1:Vocabulary 收获机械 联合收割机及功能部件 第1部分:词汇 |
China National Standards t |
English PDF |
GB/T 5982-2005 |
testing method for thresher 脱粒机 试验方法 |
China National Standards t |
English PDF |
GB/T 5097-2005 |
Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions 无损检测 渗透检测和磁粉检测 观察条件 |
China National Standards t |
English PDF |
GB/T 19805-2005 |
Qualification test of welding operators 焊接操作工 技能评定 |
China National Standards t |
English PDF |
GB/T 19804-2005 |
Welding-General tolerances for welded constructions-Dimensions for lengths and angles-Shape and position 焊接结构的一般尺寸公差和形位公差 |
China National Standards t |
English PDF |
GB/T 19803-2005 |
Non-destructive testing-Radiographic image quality indicators-Principles and identification 无损检测 射线照相像质计 原则与标识 |
China National Standards t |
English PDF |
GB/T 19802-2005 |
Non-destructive testing-Industrial radiographic illuminators-Minimum requirements 无损检测 工业射线照相观片灯 最低要求 |
China National Standards t |
English PDF |
GB/T 19801-2005 |
Non-destructive testing-Acoustic emission inspection-Secondary calibration of acoustic emission sensors 无损检测 声发射检测 声发射传感器的二级校准 |
China National Standards t |
English PDF |
GB/T 19800-2005 |
Non-destructive testing-Acoustic emission inspection-Primary calibration of transducers 无损检测 声发射检测 换能器的一级校准 |
China National Standards t |
English PDF |
GB/T 19799.1-2005 |
Non-destructive testing-Ultrasonic testing-Calibration block No.1 无损检测 超声检测 1 号校准试块 |
China National Standards t |
English PDF |
GB/T 19796-2005 |
Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes 农业灌溉设备 聚乙烯承压管用塑料鞍座 |
China National Standards t |
English PDF |
GB/T 19795.1-2005 |
Agricultural irrigation equipment-Rotating sprinklers-Part 1:Design and operational requirements 农业灌溉设备 旋转式喷头 第1部分:结构和运行要求 |
China National Standards t |
English PDF |
GB/T 19791-2005 |
the criterion Insect proof net design And its installation for greenhouse 温室防虫网设计安装规范 |
China National Standards t |
English PDF |
GB/T 18851.4-2005 |
Non-destructive testing-Penetrant testing-Part 4:Equipment 无损检测 渗透检测 第4部分:设备 |
China National Standards t |
English PDF |
GB/T 12604.4-2005 |
Non-destructive testing-Terminology-Terms used in acoustic emission testing 无损检测 术语 声发射检测 |
China National Standards t |
English PDF |
GB/T 12604.1-2005 |
Non-destructive testing-Terminology-Terms used in ultrasonic testing 无损检测 术语 超声检测 |
China National Standards t |
English PDF |
GB/T 10054-2005 |
Builder’s hoist 施工升降机 |
China National Standards t |
English PDF |
GB 19781-2005 |
Medical laboratories-Requirements for safety 医学实验室-安全要求 |
China National Standards t |
English PDF |
GB/T 27011-2005 |
Conformity assessment-General requirements for accreditation bodies accrediting conformity assessment bodies 合格评定--认可机构通用要求 |
China National Standards t |
English PDF |
GB/T 19783-2005 |
Chinese mitten-handed crab 中华绒螯蟹 |
China National Standards t |
English PDF |
GB 11780-2005 |
the minimum mesh size of the traw1 cod-end in South China Sea 南海区拖网网囊最小网目尺寸 |
China National Standards t |
English PDF |
GB 11779-2005 |
the minimum mesh size of the trawl cod-end in the East China Sea and Yellow Sea 东海、黄海区拖网网囊 最小网目尺寸 |
China National Standards t |
English PDF |
GB/T 19661.1-2005 |
Safety requirements for nuclear instrumentations and systems Part 1:General requirements 核仪器及系统安全要求 第1部分:通用要求 |
China National Standards t |
English PDF |
GB/T 9218-2005 |
Reels for 35mm motion picture projectors-Dimensions 35mm电影放映片夹 尺寸 |
China National Standards t |
English PDF |
GB/T 7700-2005 |
Spindle for 16mm motion picture projector reels-Dimensions 16mm电影放映机片轴 尺寸 |
China National Standards t |
English PDF |
GB 17691-2005 |
Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V) 车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法(中国III、IV、V阶段) |
China National Standards t |
English PDF |
GB 19756-2005 |
Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheel low-speed goods vehicles 三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法(中国I、II阶段) |
China National Standards t |
English PDF |
GB 3847-2005 |
Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E. 车用压燃式发动机和压燃式发动机汽车排气烟度排放限值及测量方法 |
China National Standards t |
English PDF |
GB 19758-2005 |
Limits and measurement methods for exhaust smoke emissions from motorcycles and mopeds 摩托车和轻便摩托车排气烟度排放限值及测量方法 |
China National Standards t |
English PDF |
GB 19757-2005 |
Limits and measurement methods for noise emitted by accelerating tri-wheel and low-speed vehicle 三轮汽车和低速货车加速行驶车外噪声限值及测量方法(中国I、II阶段) |
China National Standards t |
English PDF |
GB 18285-2005 |
Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions 点燃式发动机汽车排气污染物排放限值及测量方法(双怠速法及简易工况法) |
China National Standards t |
English PDF |
GB/T 19771-2005 |
Information technology-Security technology-Public key infrastructure-Minimum interoperability specification for PKI components 信息技术 安全技术 公钥基础设施 PKI 组件最小互操作规范 |
China National Standards t |
English PDF |
GB/T 16264.8-2005 |
Information technology-Open Systems Interconnection-The Directory:Public-key and attribute certificate frameworks 信息技术 开放系统互连 目录 第8部分:公钥和属性证书框架 |
China National Standards t |
English PDF |
GB/T 514-2005 |
Specification for liquid-in-glass thermometers for testing of petroleum products 石油产品试验用玻璃液体温度计技术条件 |
China National Standards t |
English PDF |
GB/T 4857.7-2005 |
Packaging-Basic tests for transport packages-Part 7:Sinusoidal vibration test method at constant frequency 包装 运输包装件基本试验 第7部分:正弦定频振动试验方法 |
China National Standards t |
English PDF |
GB/T 4857.2-2005 |
Packaging-Basic tests for transport packages-Part 2:Temperature and humidity conditioning 包装 运输包装件基本试验 第2部分:温湿度调节处理 |
China National Standards t |
English PDF |
GB/T 4857.13-2005 |
Packaging-Basic tests for transport packages-Part 13:Low pressure test 包装 运输包装件基本试验 第13部分:低气压试验方法 |
China National Standards t |
English PDF |
GB/T 4857.11-2005 |
Packaging-Basic tests for transport packages-Part 11:Horizontal impact test methods 包装 运输包装件基本试验 第11部分:水平冲击试验方法 |
China National Standards t |
English PDF |
GB/T 4857.10-2005 |
Packaging-Basic tests for transport packages-Part 10:Sinusoidal vibration test method using at variable vibration frequency 包装 运输包装件基本试验 第10部分:正弦变频振动试验方法 |
China National Standards t |
English PDF |
GB/T 19787-2005 |
Heat-shrinkable Polyolefine Films for Packaging Materials 包装材料 聚烯烃热收缩薄膜 |
China National Standards t |
English PDF |
GB/T 19785-2005 |
Stretch packaging 拉伸缠绕包装 |
China National Standards t |
English PDF |
GB/T 19780-2005 |
Capacity calibration of spherical metal tank-Total station external measuring method 球形金属罐的容积标定 全站仪外测法 |
China National Standards t |
English PDF |
GB/T 19779-2005 |
Petroleum and liquid petroleum products-Calculation of oil quantities-Static measurement 石油和液体石油产品油量计算 静态计量 |
China National Standards t |
English PDF |
GB/T 19775-2005 |
Glass-metal sealed heat-pipe evacuated solar collector tubes 玻璃--金属封接式热管真空太阳集热管 |
China National Standards t |
English PDF |
GB/T 19774-2005 |
Specification of water electrolyte system for producing hydrogen 水电解制氢系统技术要求 |
China National Standards t |
English PDF |
GB/T 19773-2005 |
Specification of hydrogen purification system on pressure swing adsorption 变压吸附提纯氢系统技术要求 |
China National Standards t |
English PDF |
GB/T 19772-2005 |
the reuse of urban recycling water Water quality standard for groundwater recharge 城市污水再生利用 地下水回灌水质 |
China National Standards t |
English PDF |
GB/T 19789-2005 |
Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 |
China National Standards t |
English PDF |
GB/T 17049-2005 |
All-glass evacuated solar collector tubes 全玻璃真空太阳集热管 |
China National Standards t |
English PDF |
GB/T 16811-2005 |
Running result and the monitoring and testing for industrial boilers water-treatment equipment 工业锅炉水处理设施运行效果与监测 |
China National Standards t |
English PDF |
GB/T 11081-2005 |
Standard Test Method for Ultraviolet Adsorption of White Oils 白油紫外吸光度测定法 |
China National Standards t |
English PDF |
GB/T 10411-2005 |
D.C.traction power supply system for urban rail transit 城市轨道交通直流牵引供电系统 |
China National Standards t |
English PDF |
GB 19778-2005 |
Packaging glass containers-Release of lead cadmium arsenic and antimony-Permissible limits 包装玻璃容器 铅、镉、砷、锑 溶出允许限量 |
China National Standards t |
English PDF |
GB/T 19755-2005 |
Measurement Methods for Emissions from Light-duty Hybrid Electric Vehicles 轻型混合动力电动汽车 污染物排放测量方法 |
China National Standards t |
English PDF |
GB/T 19752-2005 |
Hybrid electric vehicles-Power performance-Test method 混合动力电动汽车 动力性能 试验方法 |
China National Standards t |
English PDF |
Find out:54692Items | To Page of: First -Previous-Next -Last | [458] [459] [460] [461] [462] [463] [464] |