GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 11211-2009 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method 硫化橡胶或热塑性橡胶 与金属粘合强度的测定 二板法 |
China National Standards thermoplastic |
English PDF |
GB/T 4217-2008 |
thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures 流体输送用热塑性塑料管材 公称外径和公称压力 |
China National Standards thermoplastic |
English PDF |
GB/T 18252-2008 |
Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 |
China National Standards thermoplastic |
English PDF |
GB/T 1632.5-2008 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : thermoplastic polyester(TP) homopolymers and copolymers 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第5部分:热塑性均聚和共聚型聚酯(TP) |
China National Standards thermoplastic |
English PDF |
GB/T 9352-2008 |
Plastic - Compression moulding of test specimens of thermoplastic materials 塑料 热塑性塑料材料试样的压塑 |
China National Standards thermoplastic |
English PDF |
GB/T 2412-2008 |
Plastics - Polypropylene(PP) and propylene copolymer thermoplastics - Determination of isotactic index 塑料 聚丙烯(PP)和丙烯共聚物热塑性塑料等规指数的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 22027-2008 |
thermoplastic elastomers - Nomenclature and abbreviated terms 热塑性弹性体 命名和缩略语 |
China National Standards thermoplastic |
English PDF |
GB/T 9870.2-2008 |
Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies 硫化橡胶或热塑性橡胶动态性能的测定 第2部分:低频扭摆法 |
China National Standards thermoplastic |
English PDF |
GB/T 533-2008 |
Rubber,vulcanized or thermoplastic - Determination of density 硫化橡胶或热塑性橡胶 密度的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 532-2008 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 531.1-2008 |
Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) |
China National Standards thermoplastic |
English PDF |
GB/T 529-2008 |
Rubber,vulcanized or thermoplastic - Determination of tear strength(Trouser,angle and crescent test pieces) 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) |
China National Standards thermoplastic |
English PDF |
GB/T 12830-2008 |
Rubber,vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards thermoplastic |
English PDF |
GB/T 1685-2008 |
Rubber,vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures 硫化橡胶或热塑性橡胶 在常温和高温下压缩应力松弛的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 21874-2008 |
Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - thermoplastic elastomers 弹性体密封件 排水管道接口密封件材料要求 热塑性弹性体 |
China National Standards thermoplastic |
English PDF |
GB/T 21283.5-2008 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections 密封元件为热塑性材料的旋转轴唇形密封圈 第5部分 外观缺陷的识别 |
China National Standards thermoplastic |
English PDF |
GB/T 21283.4-2008 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures 密封元件为热塑性材料的旋转轴唇形密封圈 第4部分:性能试验程序 |
China National Standards thermoplastic |
English PDF |
GB/T 21283.3-2008 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3 :Storage,handling and installation 密封元件为热塑性材料的旋转轴唇形密封圈 第3部分:贮存、搬运和安装 |
China National Standards thermoplastic |
English PDF |
GB/T 9871-2008 |
Rubber,vulcanized or thermoplastic-Determination of aging characteristics by measurement of stress relaxation 硫化橡胶或热塑性橡胶老化性能的测定 拉伸应力松弛试验 |
China National Standards thermoplastic |
English PDF |
GB/T 9867-2008 |
Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device 硫化橡胶或热塑性橡胶耐磨性能的测定(旋转辊筒式磨耗机法) |
China National Standards thermoplastic |
English PDF |
GB/T 3511-2008 |
Rubber, vulcanized or thermoplastic - Resistance to weathering 硫化橡胶或热塑性橡胶 耐候性 |
China National Standards thermoplastic |
English PDF |
GB/T 21283.2-2007 |
Rotary shaft lip-type seals incorporating thermoplastic sealing element - Part 2:Vocabulary 密封元件为热塑性材料的旋转轴唇形密封圈 第2部分:词汇 |
China National Standards thermoplastic |
English PDF |
GB/T 21283.1-2007 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements-Part 1: Nominal dimensions and tolerances 密封元件为热塑性材料的旋转轴唇形密封圈 第1部分:基本尺寸和公差 |
China National Standards thermoplastic |
English PDF |
GB/T 20860-2007 |
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds 包装 热塑性软质薄膜袋 折边处撕裂扩展试验方法 |
China National Standards thermoplastic |
English PDF |
GB/T 13934-2006 |
Rubber,vulcanized or thermoplastic - Determination of flex cracking and crack growth(De Mattia) 硫化橡胶或热塑性橡胶 屈挠龟裂和裂口增长的测定(德墨西亚型) |
China National Standards thermoplastic |
English PDF |
GB/T 9870.1-2006 |
Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance 硫化橡胶或热塑性橡胶动态性能的测定 第1部分:通则 |
China National Standards thermoplastic |
English PDF |
GB/T 12829-2006 |
Rubber, vulcanized or thermoplastic - Determination of tear strength of small test pieces (Delft test pieces) 硫化橡胶或热塑性橡胶小试样(德尔夫特试样)撕裂强度的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 20462.2-2006 |
thermoplastic tubing and hoses for automotive use―Part 2:Petroleum-based-fuel applications 汽车用热塑性非增强软管和软管 第2部分: 石油基燃油用 |
China National Standards thermoplastic |
English PDF |
GB/T 20462.1-2006 |
thermoplastic tubing and hoses for automotive use―Part 1: Non-fuel applications 汽车用热塑性非增强软管和软管 第1部分: 非燃油用 |
China National Standards thermoplastic |
English PDF |
GB/T 19993-2005 |
thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 |
China National Standards thermoplastic |
English PDF |
GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards thermoplastic |
English PDF |
GB/T 19280-2003 |
thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验) |
China National Standards thermoplastic |
English PDF |
GB/T 19278-2003 |
General terms and their definitions of thermoplastic pipes,fittings and valves 热塑性塑料管材、管件及阀门通用术语及其定义 |
China National Standards thermoplastic |
English PDF |
GB/T 19243-2003 |
Rubber,vulcanized or thermoplastic--Methods of test for staining in contact with organic material 硫化橡胶或热塑性橡胶与有机物接触污染的试验方法 |
China National Standards thermoplastic |
English PDF |
GB/T 7755-2003 |
Rubber,vulcanized of thermoplastic--Determination of permeability to gases 硫化橡胶或热塑性橡胶 透气性的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 9647-2003 |
thermoplastics pipes--Determination of ringstiffness 热塑性塑料管材环刚度的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 8804.3-2003 |
thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材 |
China National Standards thermoplastic |
English PDF |
GB/T 8804.2-2003 |
thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards thermoplastic |
English PDF |
GB/T 8804.1-2003 |
thermoplastic pipes--Determination of tensile properties--Part 1: General test method 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则 |
China National Standards thermoplastic |
English PDF |
GB/T 6111-2003 |
thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards thermoplastic |
English PDF |
GB/T 18991-2003 |
thermoplastics pipes and fittings forhot and cold water systems 冷热水系统用热塑性塑料管材和管件 |
China National Standards thermoplastic |
English PDF |
GB/T 17037.4-2003 |
Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 17037.3-2003 |
Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards thermoplastic |
English PDF |
GB/T 7760-2003 |
Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method 硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法 |
China National Standards thermoplastic |
English PDF |
GB/T 18743-2002 |
thermoplastics pipes for the transport of fluids--Determination of impact by the charpy method 流体输送用热塑性塑料管材简支梁冲击试验方法 |
China National Standards thermoplastic |
English PDF |
GB/T 8802-2001 |
thermoplastics pipes and fitting--Determination of vicat softening temperature 热塑性塑料管材、管件 维卡软化温度的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 6671-2001 |
thermoplastics pipes--Determination of longitudinal reversion 热塑性塑料管材 纵向回缩率的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 18475-2001 |
thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 |
China National Standards thermoplastic |
English PDF |
GB/T 14152-2001 |
thermoplastics pipes--Determination of resistance to external blows--Round-the-clock method 热塑性塑料管材耐外冲击性能试验方法 时针旋转法 |
China National Standards thermoplastic |
English PDF |
GB/T 10798-2001 |
thermoplastics pipes--Universal wall thickness table 热塑性塑料管材通用壁厚表 |
China National Standards thermoplastic |
English PDF |
GB/T 6036-2001 |
Rubber,vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验) |
China National Standards thermoplastic |
English PDF |
GB/T 2439-2001 |
Conducting and dissipative rubbers,vulcanized or thermoplastic--Measurement of resistivity 硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 12585-2001 |
Rubber,vulcanized or thermoplastic--Rubber sheet and rubber-coated fabric--Determination rate of volatile liquids(gravimetic technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定(质量法) |
China National Standards thermoplastic |
English PDF |
GB/T 3682-2000 |
Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 1633-2000 |
Plastics--thermoplastic materials--Determination of Vicat softening temperature(VST) 热塑性塑料维卡软化温度(VST)的测定 |
China National Standards thermoplastic |
English PDF |
GB/T 18042-2000 |
thermoplastics pipes--Determination of creep ratio 热塑性塑料管材蠕变比率的试验方法 |
China National Standards thermoplastic |
English PDF |
GB/T 6031-1998 |
Rubber,vulcanized or thermoplastic--Determination of hardness (hardness between 10IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶硬度的测定(10~100 IRHD) |
China National Standards thermoplastic |
English PDF |
GB/T 17037.1-1997 |
Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards thermoplastic |
English PDF |
Find out:158Items | To Page of: First -Previous-Next -Last | 1 2 |