Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 29603-2013 |
Full aperture easy open end made of tinplate or ECCS 镀锡或镀铬薄钢板全开式易开盖 |
China National Standards tin |
 English PDF |
| GB/T 29576-2013 |
Detection and identification of Achatina fulica Bowdich 非洲大蜗牛检疫鉴定方法 |
China National Standards tin |
English PDF |
| GB/T 29573-2013 |
Technical regulations for planting and management of mulberry tree in the tropical and subtropical zones 热带亚热带桑树栽培管理技术规程 |
China National Standards tin |
English PDF |
| GB/T 10067.42-2013 |
Basic specifications for electroheat installations - Part 42: Pusher resistance heating unit 电热装置基本技术条件 第42部分：推送式电阻加热机组 |
China National Standards tin |
English PDF |
| GB/T 10067.41-2013 |
Basic specifications for electroheat installations - Part 41: Mesh belt resistance heating unit 电热装置基本技术条件 第41部分：网带式电阻加热机组 |
China National Standards tin |
English PDF |
| GB 14711-2013 |
General requirements for safety of small and medium size rotating electrical machines 中小型旋转电机通用安全要求 |
China National Standards tin |
English PDF |
| GB/T 8923.4-2013 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分：与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards tin |
English PDF |
| GB/T 29493.7-2013 |
Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 7: Determination of monomeric diisocyanates in polyurethane coating agent 纺织染整助剂中有害物质的测定 第7部分：聚氨酯涂层整理剂中二异氰酸酯单体的测定 |
China National Standards tin |
English PDF |
| GB/T 16903.3-2013 |
Rules for the presentation of graphical symbols for use on graphical signs - Part 3: Method for testing perceptibility 标志用图形符号表示规则 第3部分：感知性测试方法 |
China National Standards tin |
English PDF |
| GB/T 16903.2-2013 |
Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility 标志用图形符号表示规则 第2部分：理解度测试方法 |
China National Standards tin |
English PDF |
| GB/T 7986-2013 |
Conveyor belts - Drum friction testing 输送带 滚筒摩擦试验 |
China National Standards tin |
English PDF |
| GB/T 5755-2013 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment 钢丝绳芯输送带 绳与包覆胶粘合试验 原始状态下和热老化后试验 |
China National Standards tin |
English PDF |
| GB/T 29536-2013 |
Testing method for the forming limit diagram (FLD) of metal tube 金属管材成形极限图（FLD） 试验方法 |
China National Standards tin |
English PDF |
| GB/T 29531-2013 |
Methods of measuring and evaluating vibration of pumps 泵的振动测量与评价方法 |
China National Standards tin |
English PDF |
| GB/T 29529-2013 |
Methods of measuring and evaluating noise of pumps 泵的噪声测量与评价方法 |
China National Standards tin |
English PDF |
| GB/T 29524-2013 |
Safety specification for Acid-making with Smelting Gas 冶炼烟气制酸安全生产规范 |
China National Standards tin |
English PDF |
| GB/T 29523-2013 |
Safety specification for zinc smelting（hydrometallurgy） 锌冶炼安全生产规范（湿法） |
China National Standards tin |
English PDF |
| GB/T 29522-2013 |
Safety specification for zinc smelting (pyrometallurgy) 锌冶炼安全生产规范(火法) |
China National Standards tin |
English PDF |
| GB/T 29520-2013 |
Safety specification for copper smelting enterprise 铜冶炼安全生产规范 |
China National Standards tin |
English PDF |
| GB/T 29519-2013 |
Safety specification for lead smelting 铅冶炼安全生产规范 |
China National Standards tin |
English PDF |
| GB/T 29548-2013 |
High speed precision straight side press - Testing of the accuracy 闭式高速精密压力机 精度 |
China National Standards tin |
English PDF |
| GB/T 29547-2013 |
Open front high speed precision press - Testing of the accuracy 开式高速精密压力机 精度 |
China National Standards tin |
English PDF |
| GB/T 29544-2013 |
Safety requirements for off-gird type wind-solar photovoltaic hybrid electricity generating system 离网型风光互补发电系统 安全要求 |
China National Standards tin |
English PDF |
| GB 19044-2013 |
Minimum allowable values of energy efficiency and the energy efficiency grades of self-ballasted fluorescent lamps for general lighting service 普通照明用自镇流荧光灯能效限定值及能效等级 |
China National Standards tin |
English PDF |
| GB 19043-2013 |
Minimum allowable values of energy efficiency and the energy efficiency grades of double-capped fluorescent lamps for general lighting service 普通照明用双端荧光灯能效限定值及能效等级 |
China National Standards tin |
English PDF |
| GB 50898-2013 |
Technical code for water mist fire extinguishing system 细水雾灭火系统技术规范 |
China National Standards tin |
English PDF |
| GB 50883-2013 |
Code for quality acceptance of light-metal smelting mechanical equipment installation engineering 轻金属冶炼机械设备安装工程质量验收规范 |
China National Standards tin |
English PDF |
| GB 50882-2013 |
Code for construction specification of light-metal smelting mechanical equipment installation engineering 轻金属冶炼机械设备安装工程施工规范 |
China National Standards tin |
English PDF |
| GB/T 6730.70-2013 |
Iron ores - Determination of total iron content - Titrimetric method after tin(Ⅱ) chloride reduction 铁矿石 全铁含量的测定 氯化亚锡还原滴定法 |
China National Standards tin |
English PDF |
| GB/T 4325.4-2013 |
Methods for chemical analysis of molybdenum - Part 4: Determination of tin content - Atomic fluorescence spectrometry 钼化学分析方法 第4部分：锡量的测定 原子荧光光谱法 |
China National Standards tin |
English PDF |
| GB/T 4325.26-2013 |
Methods for chemical analysis of molybdenum - Part 26: Determination of aluminium，magnesium，calcium，vanadium，chromium，manganese，iron，cobalt，nickel，copper，zinc，arsenic，cadmium ，tin，antimony，tungsten，lead and bismuth contents 钼化学分析方法 第26部分：铝、镁、钙、钒、铬、锰、铁、钴、镍、铜、锌、砷、镉、锡、锑、钨、铅和铋量的测定 电感耦合等离子体质谱法 |
China National Standards tin |
English PDF |
| GB/T 17398-2013 |
Code of dust and poison control for lead smelting 铅冶炼防尘防毒技术规程 |
China National Standards tin |
English PDF |
| GB/T 29499-2013 |
Synthetic resin curtain-wall-imitation coating on architectural 建筑用仿幕墙合成树脂涂层 |
China National Standards tin |
English PDF |
| GB/T 29493.3-2013 |
Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 3: Determination of organotins GC/MS method 纺织染整助剂中有害物质的测定 第3部分：有机锡化合物的测定 气相色谱-质谱法 |
China National Standards tin |
English PDF |
| GB/T 29492-2013 |
Chemicals applied in digital printing materials - The determination of triazines B - Reversed phase high performance liquid chromatography 数字印刷材料用化学品 三嗪B含量的测定 反相高效液相色谱法 |
China National Standards tin |
English PDF |
| GB/T 29489-2013 |
lnductive load switching of high-voltage alternating current switchgear and controlgear 高压交流开关设备和控制设备的感性负载开合 |
China National Standards tin |
English PDF |
| GB/T 29488-2013 |
Medium/high-power Biogas generating set 中大功率沼气发电机组 |
China National Standards tin |
English PDF |
| GB/T 29487-2013 |
Medium/high-power mine gas generating set 中大功率瓦斯发电机组 |
China National Standards tin |
English PDF |
| GB/T 10259-2013 |
Liquid-scintillation counting system 液体闪烁计数器 |
China National Standards tin |
English PDF |
| GB/T 50866-2013 |
Design code for photovoltaic power station connecting to power system 光伏发电站接入电力系统设计规范 |
China National Standards tin |
English PDF |
| GB/T 30315-2013 |
Test method for reciprocating flex fatigue of dipped cords 浸胶帘线往复曲挠疲劳试验方法 |
China National Standards tin |
English PDF |
| GB 29039-2012 |
Steel heating radiator 钢制采暖散热器 |
China National Standards tin |
English PDF |
| GB/T 8151.10-2012 |
Methods for chemical analysis of zinc concentrates - Part 10：Determination of tin content - Hydride generation-atomic fluorescence spectrometry 锌精矿化学分析方法 第10部分：锡量的测定 氢化物发生-原子荧光光谱法 |
China National Standards tin |
English PDF |
| GB/T 6003.2-2012 |
Test sieves - Technical requirements and testing - Part 2: Test sieves of metal wire cloth 试验筛 技术要求和检验 第2部分：金属穿孔板试验筛 |
China National Standards tin |
English PDF |
| GB/T 4324.3-2012 |
Methods for chemical analysis of tungsten - Part 3: Determination of tin content - Hydrogenate atomic absorption spectrometry 钨化学分析方法 第3部分：锡量的测定 氢化物原子吸收光谱法 |
China National Standards tin |
English PDF |
| GB/T 4324.26-2012 |
Methods for chemical analysis of tungsten - Part 26: Determination of nitrogen content - Pulse heating inert gas fusion-thermal conductive method and the Nessler reagent spectrophotometry 钨化学分析方法 第26部分：氮量的测定 脉冲加热惰气熔融-热导法和奈氏试剂分光光度法 |
China National Standards tin |
English PDF |
| GB/T 4324.25-2012 |
Methods for chemical analysis of tungsten - Part 25: Determination of oxygen content - Pulse heating inert gas fusion-infrared absorption method 钨化学分析方法 第25部分：氧量的测定 脉冲加热惰气熔融-红外吸收法 |
China National Standards tin |
English PDF |
| GB/T 4103.1-2012 |
Methods for chemical analysis of lead and lead alloys - Part 1: Determination of tin content 铅及铅合金化学分析方法 第1部分：锡量的测定 |
China National Standards tin |
English PDF |
| GB/T 29160-2012 |
Test methods for solar-plus-supplementary water heating system (tank capacity more than 0.6m3) 带辅助能源的太阳能热水系统(储水箱容积大于0.6m3)性能试验方法 |
China National Standards tin |
English PDF |
| GB/T 29158-2012 |
Technical code for solar-plus-supplementary water heating system (tank capacity more than 0.6m3) 带辅助能源的太阳能热水系统(储水箱容积大于0.6m3)技术规范 |
China National Standards tin |
English PDF |
| GB/T 29092-2012 |
Magnesium and magnesium alloy terms and definitions of die-castings defects 镁及镁合金压铸缺陷术语 |
China National Standards tin |
English PDF |
| GB/T 29089-2012 |
Spherical tin-solder powder 球形焊锡粉 |
China National Standards tin |
English PDF |
| GB/T 29071-2012 |
Non-destructive testing - Test method for industrial computed tomography (CT) examination of initiating explosive device 无损检测 火工装置工业计算机层析成像（CT）检测方法 |
China National Standards tin |
English PDF |
| GB/T 29070-2012 |
Non-destructive testing - Industrial computed tomography (CT) testing - General requirements 无损检测 工业计算机层析成像（CT）检测 通用要求 |
China National Standards tin |
English PDF |
| GB/T 29069-2012 |
Non-destructive testing - Test method for measurement of industrial computed tomography (CT) system performance 无损检测 工业计算机层析成像（CT）系统性能测试方法 |
China National Standards tin |
English PDF |
| GB/T 29068-2012 |
Non-destructive testing - Guide for industrial computed tomography (CT) system selection 无损检测 工业计算机层析成像（CT）系统选型指南 |
China National Standards tin |
English PDF |
| GB/T 29067-2012 |
Non-destructive testing - Test method for measuring industrial computed tomography (CT) image 无损检测 工业计算机层析成像（CT）图像测量方法 |
China National Standards tin |
English PDF |
| GB/T 29054-2012 |
Solar-grade casting multi-crystalline silicon brick 太阳能级铸造多晶硅块 |
China National Standards tin |
English PDF |
| GB/T 29037-2012 |
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures 热喷涂 抗高温腐蚀和氧化的保护涂层 |
China National Standards tin |
English PDF |
| GB/T 29034-2012 |
Non-destructive testing - Guide for industrial computed tomography (CT) imaging 无损检测 工业计算机层析成像（CT）指南 |
China National Standards tin |
English PDF |
| GB/T 29024.3-2012 |
Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter 粒度分析 单颗粒的光学测量方法：第3部分：液体颗粒计数器光阻法 |
China National Standards tin |
English PDF |
| GB/T 19350-2012 |
Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement 金属和其它无机覆盖层 为减少氢脆危险的涂覆后钢铁的处理 |
China National Standards tin |
English PDF |
| GB/T 19349-2012 |
Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement 金属和其它无机覆盖层 为减少氢脆危险的钢铁预处理 |
China National Standards tin |
English PDF |
| GB/T 19326-2012 |
Forged branch outlet fittings, socket-welding, threaded and buttwelding 锻制承插焊、螺纹和对焊支管座 |
China National Standards tin |
English PDF |
| GB/T 17492-2012 |
Industrial woven wire cloth - Technical requirements and testing 工业用金属丝编织网 技术要求和检验 |
China National Standards tin |
English PDF |
| GB/T 17185-2012 |
Steel flanged fittings 钢制法兰管件 |
China National Standards tin |
English PDF |
| GB/T 16840.5-2012 |
Technical determination methods for electrical fire evidence - Part 5: Method of recognizing and collecting the physical evidence of electrical fire 电气火灾痕迹物证技术鉴定方法 第5部分：电气火灾物证识别和提取方法 |
China National Standards tin |
English PDF |
| GB/T 16666-2012 |
Monitoring and testing for energy saving of motor-pump liquid transport system 泵类液体输送系统节能监测 |
China National Standards tin |
English PDF |
| GB 18614-2012 |
Fire extinguishing agent heptafluoropropane（HFC227ea） 七氟丙烷（HFC227ea）灭火剂 |
China National Standards tin |
English PDF |
| GB/T 29434-2012 |
Aluminum alloy ingots for high strength and toughness castings with heat resisting 耐热高强韧铸件用铝合金锭 |
China National Standards tin |
English PDF |
| GB/T 29291-2012 |
Button general technical requirements and testing methods - Zinc alloy buttons 钮扣通用技术要求和检测方法 锌合金类 |
China National Standards tin |
English PDF |
| GB/T 29290-2012 |
Button general technical requirements and testing methods - Unsaturated polyester resin buttons 钮扣通用技术要求和检测方法 不饱和聚酯树脂类 |
China National Standards tin |
English PDF |
| GB/T 29287-2012 |
Pulps - Laboratory beating - PFI mill method 纸浆 实验室打浆 PFI磨法 |
China National Standards tin |
English PDF |
| GB/T 29050-2012 |
Anti-rutting agent asphalt concrete for road engineering 道路用抗车辙剂沥青混凝土 |
China National Standards tin |
English PDF |
| GB/T 29048-2012 |
Operating forces - Test method - Windows 窗的启闭力试验方法 |
China National Standards tin |
English PDF |
| GB/T 29047-2012 |
Prefabricated directly buried insulating pipes and fittings with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards tin |
English PDF |
| GB/T 29046-2012 |
Test methods of technical specification for pre-insulated directly buried district heating pipes 城镇供热预制直埋保温管道技术指标检测方法 |
China National Standards tin |
English PDF |
| GB/T 29045-2012 |
Thin prefabricated hot water radiant heating board 预制轻薄型热水辐射供暖板 |
China National Standards tin |
English PDF |
| GB/T 29044-2012 |
Water quality for heating and air conditioning systems 采暖空调系统水质 |
China National Standards tin |
English PDF |
| GB/T 29043-2012 |
Graduation and test method for thermal insulating properties of curtain walls 建筑幕墙保温性能分级及检测方法 |
China National Standards tin |
English PDF |
| GB/T 29041-2012 |
Road wear testing methods for motor vehicle tyres 汽车轮胎道路磨耗试验方法 |
China National Standards tin |
English PDF |
| GB/T 11944-2012 |
Insulating glass unit 中空玻璃 |
China National Standards tin |
English PDF |
| GB/T 8077-2012 |
Methods for testing uniformity of concrete admixture 混凝土外加剂匀质性试验方法 |
China National Standards tin |
English PDF |
| GB/T 29419-2012 |
Establishing performance ratings for wood-plastic composite deck boards and guardrail system performance 塑木复合材料铺板性能等级和护栏体系性能 |
China National Standards tin |
English PDF |
| GB/T 29344-2012 |
Standards on harvesting and processing techniques of ganoderma lucidum spore powder 灵芝孢子粉采收及加工技术规范 |
China National Standards tin |
English PDF |
| GB/T 15916-2012 |
Surface active agents - Determination of chelating agent content - Titrimetric method 表面活性剂 螯合剂含量的测定 滴定法 |
China National Standards tin |
English PDF |
| GB/T 29470-2012 |
Self-regulating heating elements 自限温电热片 |
China National Standards tin |
English PDF |
| GB/Z 29014-2012 |
Cutting tool data representation and exchange - Definitions, principles and methods for reference dictionaries 切削刀具数据表达与交换 参考字典的定义、原则和方法 |
China National Standards tin |
English PDF |
| GB/Z 27414-2012 |
Construction guide of testing resource information sharing system 检测资源信息共享体系建设指南 |
China National Standards tin |
English PDF |
| GB/T 553-2012 |
Painting and marking of chain cables 锚链涂漆和标志 |
China National Standards tin |
English PDF |
| GB/T 29465-2012 |
Shell flange-rear head end of floating heat exchangers 浮头式热交换器用外头盖侧法兰 |
China National Standards tin |
English PDF |
| GB/T 29461-2012 |
Ultrasonic testing for electrofusion joint of polyethylene pipe 聚乙烯管道电熔接头超声检测 |
China National Standards tin |
English PDF |
| GB/T 29170-2012 |
Petroleum and natural gas industries - Drilling fluids - Laboratory testing 石油天然气工业 钻井液实验室测试 |
China National Standards tin |
English PDF |
| GB/T 29168.3-2012 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第3部分：法兰 |
China National Standards tin |
English PDF |
| GB/T 29168.2-2012 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第2部分：管件 |
China National Standards tin |
English PDF |
| GB/T 29168.1-2012 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第1部分：感应加热弯管 |
China National Standards tin |
English PDF |
| GB/T 29133-2012 |
Ships and marine technology - ECS databases - Contene,quality,updating and testing 船舶和海上技术 ECS数据库 内容、质量、更新和测试 |
China National Standards tin |
English PDF |
| GB/T 29129-2012 |
Marine disel engine for alternating current generating sets 船舶交流发电机组用柴油发动机 |
China National Standards tin |
English PDF |
| GB/T 29128-2012 |
General requirements for marine fixed gas fire-extinguishing systems 船舶固定式气体灭火系统通用要求 |
China National Standards tin |
English PDF |
| GB/T 29073-2012 |
Drafting rules of schedule network for spacecraft development 航天器研制计划流程编写规则 |
China National Standards tin |
English PDF |
| Find out:7708Items | To Page of: First -Previous-Next -Last | [32] [33] [34] [35] [36] [37] [38] |
+86-755-25831330
