GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/Z 43468.1-2023 |
Assistive technology systems and assistive devices for persons with disabilities - wheelchair fastening and occupant restraint systems - Part 1: General requirements and test methods 残障人辅助技术系统和辅助器具 轮椅车系固和乘坐者约束系统 第1部分:一般要求和试验方法 |
China National Standards wheel |
English PDF |
GB/T 23930-2023 |
Three wheel vehicle steering gear 三轮汽车 转向器 |
China National Standards wheel |
English PDF |
GB/T 23921-2023 |
Three wheel vehicle half shaft 三轮汽车 半轴 |
China National Standards wheel |
English PDF |
GB/T 43336-2023 |
General technical conditions for steering wheel control systems 舵轮控制系统通用技术条件 |
China National Standards wheel |
English PDF |
GB/Z 41082.2-2023 |
wheelchairs Part 2: Typical values and recommended limit values of dimensions, mass and operating space measured according to GB/Z 18029.5 轮椅车 第2部分:按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值 |
China National Standards wheel |
English PDF |
GB/T 5334-2021 |
Passenger car wheel bending and radial fatigue performance requirements and test methods "Modification No. 1" 乘用车 车轮 弯曲和径向疲劳性能要求及试验方法《第1号修改单》 |
China National Standards wheel |
English PDF |
GB/T 43136-2023 |
Superabrasive products Grinding wheels for precision scribing of semiconductor chips 超硬磨料制品 半导体芯片精密划切用砂轮 |
China National Standards wheel |
English PDF |
GB/T 43132-2023 |
Superabrasive products Grinding wheels for CNC grinding of precision tools 超硬磨料制品 精密刀具数控磨削用砂轮 |
China National Standards wheel |
English PDF |
GB/T 14781-2023 |
Earthmoving Machinery wheeled Machinery Steering Requirements 土方机械 轮式机器 转向要求 |
China National Standards wheel |
English PDF |
GB/T 24748-2023 |
Reciprocating internal combustion engine flywheel technical conditions 往复式内燃机 飞轮 技术条件 |
China National Standards wheel |
English PDF |
GB/T 22790-2023 |
Bicycles - Luggage racks for two-wheeled bicycles - Requirements and test methods 自行车 两轮自行车行李架 要求和试验方法 |
China National Standards wheel |
English PDF |
GB/T 41357-2022 |
Superabrasive Products Vitrified CBN Grinding wheels for Camshaft and Crankshaft Grinding 超硬磨料制品 凸轮轴和曲轴磨削用陶瓷结合剂立方氮化硼砂轮 |
China National Standards wheel |
English PDF |
GB/T 3565.7-2022 |
Safety requirements for bicycles - Part 7: Test methods for wheels and rims 自行车安全要求 第7部分:车轮与轮辋试验方法 |
China National Standards wheel |
English PDF |
GB/T 18029.2-2022 |
wheelchairs - Part 2: Determination of the dynamic stability of electric wheelchairs 轮椅车 第2部分:电动轮椅车动态稳定性的测定 |
China National Standards wheel |
English PDF |
GB/T 18029.25-2022 |
wheelchairs - Part 25: Batteries and chargers for electric wheelchairs 轮椅车 第25部分:电动轮椅车的电池和充电器 |
China National Standards wheel |
English PDF |
GB/T 40887.2-2022 |
wheelchairs and occupant restraint systems for barrier-free passenger cars - Part 2: Forward-facing wheelchair occupant systems 无障碍客车的轮椅车及乘坐者限位系统 第2部分: 前向式轮椅车乘坐者系统 |
China National Standards wheel |
English PDF |
GB/T 30661.6-2022 |
Seats for wheelchairs - Part 6: Simulated use and determination of seat cushion performance changes 轮椅车座椅 第6部分:模拟使用和座垫性能变化的测定 |
China National Standards wheel |
English PDF |
GB/T 40327-2021 |
Test methods of guided motion performance for wheeled mobile robot 轮式移动机器人导引运动性能测试方法 |
China National Standards wheel |
English PDF |
GB/T 40325-2021 |
Performance test for rubber sealing device of railway vehicle wheel rolling bearing 轨道车辆轮对滚动轴承橡胶密封装置性能试验 |
China National Standards wheel |
English PDF |
GB/T 26495-2021 |
Magneium alloy die casting for steering wheel armature 镁合金压铸转向盘骨架坯料 |
China National Standards wheel |
English PDF |
GB/T 23540-2021 |
Coated abrasives - Flap wheels with incorporated flanges or separate flanges 涂附磨具 装有卡盘或未装卡盘的砂页轮 |
China National Standards wheel |
English PDF |
GB/T 23537-2021 |
Superabrasive products - Grinding wheels and mounted points with diamond or cubic boron nitride - Limit deviations and run-out tolerances 超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差 |
China National Standards wheel |
English PDF |
GB/T 40078-2021 |
Fuel efficiency of wheeled tractors—Evaluation criteria 轮式拖拉机燃油经济性 评价指标 |
China National Standards wheel |
English PDF |
GB/T 6232-2021 |
Tractors and machinery for agriculture and forestry—wheel-to-hub fixing dimensions 农林拖拉机和机械 车轮在轮毂上安装尺寸 |
China National Standards wheel |
English PDF |
GB/T 14695-2021 |
Bucket wheel stacker reclaimer -- Type and basic parameters 臂式斗轮堆取料机 型式和基本参数 |
China National Standards wheel |
English PDF |
GB/T 4022.1-2021 |
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table—Testing of the accuracy—Part 1:Machines with table surface length of up to 1600 mm 卧轴矩台平面磨床 精度检验 第1部分:工作台面长度至1600mm的机床 |
China National Standards wheel |
English PDF |
GB/T 6476-2021 |
Surface grinding machines with vertical grinding wheel spindle and reciprocating table—Testing of the accuracy 立轴矩台平面磨床 精度检验 |
China National Standards wheel |
English PDF |
GB/T 40887.1-2021 |
wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers—Part 1:Systems for rearward-facing wheelchair seated passengers 无障碍客车的轮椅车及乘坐者限位系统 第1部分:后向式轮椅车乘坐者系统 |
China National Standards wheel |
English PDF |
GB/T 5909-2021 |
Commercial vehicles—wheels—Performance requirements and test methods for cornering and radial fatigue 商用车 车轮 弯曲和径向疲劳性能要求及试验方法 |
China National Standards wheel |
English PDF |
GB/T 5334-2021 |
Passenger car—wheels—Performance requirements and test methods for cornering and radial fatigue 乘用车 车轮 弯曲和径向疲劳性能要求及试验方法 |
China National Standards wheel |
English PDF |
GB/T 23931-2021 |
Tri-wheel vehicles—Test method 三轮汽车 试验方法 |
China National Standards wheel |
English PDF |
GB/T 24945-2021 |
Tri-wheel vehicles—General specifications 三轮汽车 通用技术条件 |
China National Standards wheel |
English PDF |
GB/T 8601-2021 |
Forged and rolled solid wheels for railway 铁路用辗钢整体车轮 |
China National Standards wheel |
English PDF |
GB/T 26036-2020 |
Aluminum alloy die forgings for automobile wheels 汽车轮毂用铝合金模锻件 |
China National Standards wheel |
English PDF |
GB/T 38834.1-2020 |
Robotics—Performance criteria and related test methods for service robots—Part 1: Locomotion for wheeled robots 机器人 服务机器人性能规范及其试验方法 第1部分:轮式机器人运动 |
China National Standards wheel |
English PDF |
GB/T 10910-2020 |
Agricultural wheeled tractors and field machinery—Measurement of whole-body vibration of the operator 农业轮式拖拉机和田间作业机械 驾驶员全身振动的测量 |
China National Standards wheel |
English PDF |
GB/T 8421-2020 |
Agricultural wheeled tractors—Operator's seat—Laboratory measurement of transmitted vibration 农业轮式拖拉机 驾驶员座椅 传递振动的实验室测量 |
China National Standards wheel |
English PDF |
GB/T 37930-2019 |
Non-destructive testing instruments—Technical specifications of X-ray real-time imaging system for automobile wheel 无损检测仪器 汽车轮毂X射线实时成像检测仪技术要求 |
China National Standards wheel |
English PDF |
GB/T 36977-2018 |
Earth-moving machinery —Forklift wheel loader—Methods of tests 土方机械-轮胎式叉装机-试验方法 |
China National Standards wheel |
English PDF |
GB/T 36978-2018 |
Earth-moving machinery — Fuel consumption for forklift wheel loader — Test methods 土方机械-轮胎式叉装机燃油消耗量-试验方法 |
China National Standards wheel |
English PDF |
GB/T 36974-2018 |
Earth-moving machinery—Forklift wheel loader—Technical specifications 土方机械-轮胎式叉装机-技术条件 |
China National Standards wheel |
English PDF |
GB/T 21152-2018 |
Earth-moving machinery—wheeled or high-speed rubber-tracked machines—Performance requirements and test procedures for brake systems 土方机械-轮式或高速橡胶履带式机器-制动系统的性能要求和试验方法 |
China National Standards wheel |
English PDF |
GB/T 12760-2018 |
Cylindrical worm and wormwheel information of the dimensional data to be givem on the drawing 圆柱蜗杆、蜗轮图样上应注明的尺寸数据 |
China National Standards wheel |
English PDF |
GB/T 10089-2018 |
Accuracy of cylindrical worm and wormwheel 圆柱蜗杆、蜗轮精度 |
China National Standards wheel |
English PDF |
GB/T 10086-2018 |
Symbols for cylindrical worm and wormwheel 圆柱蜗杆、蜗轮代号 |
China National Standards wheel |
English PDF |
GB/T 35094-2018 |
Magnesium-aluminium alloy wheel hub fixture general specification 镁铝合金轮毂夹具通用技术规范 |
China National Standards wheel |
English PDF |
GB/T 10183.1-2018 |
Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:General 起重机 车轮及大车和小车轨道公差 第1部分:总则 |
China National Standards wheel |
English PDF |
GB 36581-2018 |
Safety performance requirements and test methods of automobile wheels 汽车车轮安全性能要求及试验方法 |
China National Standards wheel |
English PDF |
GB/T 36696-2018 |
Earth-moving machinery—Fuel consumption for wheel loader —Test methods 土方机械 轮胎式装载机燃油消耗量 试验方法 |
China National Standards wheel |
English PDF |
GB/T 34592-2017 |
Steering force steering angle detector for steering wheel of automobile 汽车转向盘转向力-转向角检测仪 |
China National Standards wheel |
English PDF |
GB/T 21958-2017 |
wheeled tractor—Front drive axle 轮式拖拉机 前驱动桥 |
China National Standards wheel |
English PDF |
GB/T 15370.7-2017 |
Agricultural tractors—General requirement—Part 7: Three-wheel boat tractors 农业拖拉机 通用技术条件 第7部分:三轮船式拖拉机 |
China National Standards wheel |
English PDF |
GB/T 34227-2017 |
Rubber wheel lining for passenger ropeway 客运索道用橡胶轮衬 |
China National Standards wheel |
English PDF |
GB/T 33941.2-2017 |
Earth-moving machinery—Structure stress test method—Part 2: Frame of wheeled loaders 土方机械 结构件应力测试方法 第2部分:轮胎式装载机机架 |
China National Standards wheel |
English PDF |
GB/T 33570-2017 |
Four-wheel aligner 四轮定位仪 |
China National Standards wheel |
English PDF |
GB/T 35199-2017 |
Earth-moving machinery—wheeled loader—Technical specifications 土方机械 轮胎式装载机 技术条件 |
China National Standards wheel |
English PDF |
GB/T 4127.18-2017 |
Bonded abrasive products—Dimensions—Part 18: Grinding wheels for flat glass edge grinding machines 固结磨具 尺寸 第18部分:平板玻璃磨边用砂轮 |
China National Standards wheel |
English PDF |
GB/T 2492-2017 |
Bonded abrasive products—Permissible unbalances of grinding wheels as delivered—Testing 固结磨具 交付砂轮允许的不平衡量 测量 |
China National Standards wheel |
English PDF |
GB/T 23541-2017 |
Bonded abrasive products—Grinding wheel for steel balls 固结磨具 磨钢球砂轮 |
China National Standards wheel |
English PDF |
GB/T 35198-2017 |
Earth-moving machinery—wheeled loader—Test methods 土方机械 轮胎式装载机 试验方法 |
China National Standards wheel |
English PDF |
GB/T 35485-2017 |
Specification of guide wheel sorting machine 导轮式分拣机技术规范 |
China National Standards wheel |
English PDF |
GB/T 4127.17-2017 |
Bonded abrasive products—Dimensions—Part 17: Spindle mounted wheels 固结磨具 尺寸 第17部分:带柄磨头 |
China National Standards wheel |
English PDF |
GB/T 33436-2016 |
Test method of reliability and durability for four wheeled all-terrain vehicles 四轮全地形车可靠性和耐久性试验方法 |
China National Standards wheel |
English PDF |
GB/T 32567-2016 |
Blast wheel 抛丸器 |
China National Standards wheel |
English PDF |
GB/T 15370.6-2016 |
Agricultural tractors—General requirements—Part 6:Four-wheel boat tractors 农业拖拉机 通用技术条件 第6部分:四轮船式拖拉机 |
China National Standards wheel |
English PDF |
GB/T 21956.3-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3:Static testing method of rear mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第3部分:后置式静态试验方法 |
China National Standards wheel |
English PDF |
GB/T 21956.2-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2:Dynamic testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第2部分:前置式动态试验方法 |
China National Standards wheel |
English PDF |
GB/T 21956.1-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1:Static testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第1部分:前置式静态试验方法 |
China National Standards wheel |
English PDF |
GB/T 32069-2015 |
Earth-moving machinery—wheeled loader coupler for attachments 土方机械 轮胎式装载机附属装置的连接装置 |
China National Standards wheel |
English PDF |
GB/T 31883-2015 |
Road vehicles—Drawbar couplings, drawbar eyes ,fifth wheel kingpins ,hook couplings and toroidal eyes—Wear limits for in-use mechanical couplings 道路车辆 牵引连接件、牵引杆孔、牵引座牵引销、连接钩及环形孔 机械连接件使用磨损极限 |
China National Standards wheel |
English PDF |
GB/T 31879-2015 |
Road vehicles—General technical requirements for fifth wheel 道路车辆 牵引座通用技术条件 |
China National Standards wheel |
English PDF |
GB 21377-2015 |
Tri-wheel vehicles—Limits and measurement methods for fuel consumption 三轮汽车 燃料消耗量限值及测量方法 |
China National Standards wheel |
English PDF |
GB/T 30661.3-2015 |
wheelchair seating—Part 3: Determination of static, impact and repetitive load strengths for postural support devices 轮椅车座椅 第3部分:体位支撑装置的静态、冲击和疲劳强度测定 |
China National Standards wheel |
English PDF |
GB/T 19134-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Rear view mirrors—Requirements of performance and installation 三轮汽车和低速货车 后视镜 性能和安装要求 |
China National Standards wheel |
English PDF |
GB/T 19133-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Test methond of maximum stable side-inclination 三轮汽车和低速货车 最大侧倾稳定角试验方法 |
China National Standards wheel |
English PDF |
GB/T 19131-2015 |
Tri-wheel vehicles and low-speed goods vehicles—License plates(crackets) and it`s position 三轮汽车和低速货车 号牌板(架)及其位置 |
China National Standards wheel |
English PDF |
GB/T 19130-2015 |
Tri-wheel vehicles and low-speed goods vehicles―Performance of speed meters 三轮汽车和低速货车 车速表使用性能 |
China National Standards wheel |
English PDF |
GB/T 19128-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Retro reflector 三轮汽车和低速货车 回复反射器 |
China National Standards wheel |
English PDF |
GB/T 19125-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of front and rear position lamps,stop lamps 三轮汽车和低速货车 前位灯、后位灯和制动灯配光性能 |
China National Standards wheel |
English PDF |
GB/T 19124-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Head lamps 三轮汽车和低速货车 前照灯 |
China National Standards wheel |
English PDF |
GB/T 19123-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of turn signal lamps 三轮汽车和低速货车 转向信号灯配光性能 |
China National Standards wheel |
English PDF |
GB/T 19122-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Symbols for controls,indicators and tell tales 三轮汽车和低速货车 操纵件、指示器及信号装置的符号 |
China National Standards wheel |
English PDF |
GB/T 19121-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Steering system 三轮汽车和低速货车 转向系 |
China National Standards wheel |
English PDF |
GB/T 19120-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Braking system—Structure, performance and test methods 三轮汽车和低速货车 制动系统结构、性能和试验方法 |
China National Standards wheel |
English PDF |
GB/T 19119-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Prescription for installation of lighting and light signalling devices 三轮汽车和低速货车 照明与信号装置的安装规定 |
China National Standards wheel |
English PDF |
GB/T 19118-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Test method of noise 三轮汽车和低速货车 噪声测量方法 |
China National Standards wheel |
English PDF |
GB/T 19135-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of reversing lamps 三轮汽车和低速货车 倒车灯配光性能 |
China National Standards wheel |
English PDF |
GB/T 19129-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Electric horn—Performance requirement and methods 三轮汽车和低速货车 电喇叭 性能要求及试验方法 |
China National Standards wheel |
English PDF |
GB/T 1593-2015 |
Agricultural wheeled tractor—Rear-mounted three-point linkage—Categories 0、1N、1、2N、2、3N、3、4N and 4 农业轮式拖拉机 后置式三点悬挂装置 0、1N、1、2N、2、3N、3、4N和4类 |
China National Standards wheel |
English PDF |
GB/T 10916.2-2015 |
Agricultural wheeled tractors—Front-mounted equipment—Part 2:Stationary equipment connection 农业轮式拖拉机 前置装置 第2部分:固定设备的连接 |
China National Standards wheel |
English PDF |
GB/T 30661.2-2014 |
wheelchair seating―Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity―Seat cushions 轮椅车座椅 第2部分:维持组织完整性装置的物理和机械特性测定 座垫 |
China National Standards wheel |
English PDF |
GB/T 18029.19-2014 |
wheelchairs―Part 19: Wheeled mobility devices for use as seats in motor vehicles 轮椅车 第19部分:可作机动车座位的轮式移动装置 |
China National Standards wheel |
English PDF |
GB/T 31203-2014 |
Aluminum alloy wheel castings for passenger car 乘用车铝合金车轮铸件 |
China National Standards wheel |
English PDF |
GB/T 18029.26-2014 |
wheelchairs―Part 26:Vocabulary 轮椅车 第26部分:术语 |
China National Standards wheel |
English PDF |
GB/T 2493-2013 |
Rotation test of grinding wheel strength 砂轮的回转试验方法 |
China National Standards wheel |
English PDF |
GB/T 29634-2013 |
General specification for permanent magnetic DC gearmotor using on electric wheelchairs 电动轮椅车用永磁直流齿轮减速电动机构通用技术条件 |
China National Standards wheel |
English PDF |
GB/T 29008-2012 |
wheeled tractors for agricultural and forestry - Performance requirements of service braking device 农林轮式拖拉机 行车制动装置的性能要求 |
China National Standards wheel |
English PDF |
GB/T 15704-2012 |
Road vehicles - Light alloy wheels - Impact test procedure 道路车辆 轻合金车轮 冲击试验方法 |
China National Standards wheel |
English PDF |
GB/T 15370.5-2012 |
General requirement of agricultural tractors - Part 5: Belt-drive wheeled tractors 农业拖拉机 通用技术条件 第5部分:皮带传动轮式拖拉机 |
China National Standards wheel |
English PDF |
GB/T 15370.3-2012 |
General requirement of agricultural tractors - Part 3: Over 130kW wheeled tractors 农业拖拉机 通用技术条件 第3部分:130kW以上轮式拖拉机 |
China National Standards wheel |
English PDF |
Find out:278Items | To Page of: First -Previous-Next -Last | 1 2 3 |