Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43319-2023 |
Casting machinery Investment and lost foam casting equipment Safety technICal specifications {译} 铸造机械 熔模和消失模铸造设备 安全技术规范 |
China National Standards IC |
 English PDF |
| GB/T 43356-2023 |
Test method for periodIC infiltration of corrosion salt solution on steel bars {译} 钢筋腐蚀盐溶液周期浸润试验方法 |
China National Standards IC |
English PDF |
| GB/T 43312-2023 |
Wire rope for medICal equipment {译} 医疗器械用钢丝绳 |
China National Standards IC |
English PDF |
| GB/T 30163-2023 |
TechnICal Specifications for Energy Saving of High Air Temperature Top-Fired Hot Air Stoves for Blast Furnaces {译} 高炉用高风温顶燃式热风炉节能技术规范 |
China National Standards IC |
English PDF |
| GB/T 28924-2023 |
Guidelines for Calculation of Energy EffICiency Index for Steel Enterprises {译} 钢铁企业能效指数计算导则 |
China National Standards IC |
English PDF |
| GB/T 21837-2023 |
ElectromagnetIC detection method of ferromagnetic steel wire rope {译} 铁磁性钢丝绳电磁检测方法 |
China National Standards IC |
English PDF |
| GB/T 3286.12-2023 |
Methods for chemICal analysis of limestone and dolomite Part 12: Determination of potassium oxide and sodium oxide content Flame atomic absorption spectrometry {译} 石灰石及白云石化学分析方法 第12部分：氧化钾和氧化钠含量的测定 火焰原子吸收光谱法 |
China National Standards IC |
English PDF |
| GB/T 18639-2023 |
Rabies DiagnostIC Technology {译} 狂犬病诊断技术 |
China National Standards IC |
English PDF |
| GB/T 43449-2023 |
ForensIC Science Toxicology Laboratory Quality Control Practices {译} 法庭科学 毒物分析实验室质量控制规范 |
China National Standards IC |
English PDF |
| GB/T 29349-2023 |
ForensIC science on-site photography and video recording requirements {译} 法庭科学 现场照相、录像要求 |
China National Standards IC |
English PDF |
| GB/T 19267.1-2023 |
ForensIC Science Physical and Chemical Examination of Trace Evidence Part 1: Infrared Absorption Spectroscopy {译} 法庭科学 微量物证的理化检验 第1部分：红外吸收光谱法 |
China National Standards IC |
English PDF |
| GB/T 32800.9-2023 |
Safety requirements for hand-held non-electrIC power tools Part 9: Grinder for molds {译} 手持式非电类动力工具 安全要求 第9部分：模具用砂轮机 |
China National Standards IC |
English PDF |
| GB/T 32800.8-2023 |
Hand-held non-electrIC power tools Safety requirements Part 8: Grinders and polishers {译} 手持式非电类动力工具 安全要求 第8部分：磨光机和抛光机 |
China National Standards IC |
English PDF |
| GB/T 32800.6-2023 |
Hand-held non-electrIC power tools Safety requirements Part 6: Assembly power tools for threaded fasteners {译} 手持式非电类动力工具 安全要求 第6部分：螺纹紧固件用装配动力工具 |
China National Standards IC |
English PDF |
| GB/T 32800.5-2023 |
Safety requirements for hand-held non-electrIC power tools Part 5: Rotary impact drilling tools {译} 手持式非电类动力工具 安全要求 第5部分：回转冲击式钻孔工具 |
China National Standards IC |
English PDF |
| GB/T 41312.3-2023 |
Permeability testing methods for equipment used in chemICal industry Part 3: Plastics and their lining equipment {译} 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 |
China National Standards IC |
English PDF |
| GB/T 41312.2-2023 |
Permeability testing methods for chemICal industry equipment Part 2: Fiber reinforced thermosetting plastic equipment {译} 化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备 |
China National Standards IC |
English PDF |
| GB/T 43411-2023 |
Electron beam selective melting additive manufacturing machine tools general technICal conditions {译} 电子束选区熔化增材制造机床 通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 43338-2023 |
Manufacturing ServICes General Requirements for Business Data Integration {译} 制造服务 业务数据集成通用要求 |
China National Standards IC |
English PDF |
| GB/T 43336-2023 |
General technICal conditions for steering wheel control systems {译} 舵轮控制系统通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 43335-2023 |
Automation system and integration technICal resource sharing service system reference architecture {译} 自动化系统与集成 技术资源共享服务系统参考架构 |
China National Standards IC |
English PDF |
| GB/T 40283.4-2023 |
Automation Systems and Integration Competency Unit Interoperability for Manufacturing ApplICation Solutions Part 4: Competency Unit Assessment of Manufacturing Application Requirements {译} 自动化系统与集成 制造应用解决方案的能力单元互操作 第4部分：制造应用需求的能力单元评估 |
China National Standards IC |
English PDF |
| GB/T 22270.5-2023 |
Industrial Automation Systems and Integration Test ApplICation Service Interfaces Part 5: Application Service Interfaces {译} 工业自动化系统与集成 测试应用的服务接口 第5部分：应用程序服务接口 |
China National Standards IC |
English PDF |
| GB/T 8586-2023 |
Operating frequency allocation of fish finders and technICal specifications for preventing acoustic interference {译} 探鱼仪工作频率分配及其防止声波干扰技术规范 |
China National Standards IC |
English PDF |
| GB/T 43416-2023 |
OrthopedIC footwear Requirements and test methods {译} 矫形鞋 要求与测试方法 |
China National Standards IC |
English PDF |
| GB/T 43351-2023 |
Accessible design Content, graphICs and expression methods of touch guidance maps {译} 无障碍设计 触摸导引地图的内容、图形和表达方法 |
China National Standards IC |
English PDF |
| GB/T 43350-2023 |
ProsthetICs Quantification of physical parameters of ankle-foot devices and foot components {译} 假肢 踝足装置和足部组件物理参数的量化 |
China National Standards IC |
English PDF |
| GB/Z 41082.2-2023 |
Wheelchairs Part 2: TypICal values and recommended limit values of dimensions, mass and operating space measured according to GB/Z 18029.5 {译} 轮椅车 第2部分：按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值 |
China National Standards IC |
English PDF |
| GB/T 5744-2023 |
Marine pneumatIC quick closing valve {译} 船用气动快关阀 |
China National Standards IC |
English PDF |
| GB/T 43279.3-2023 |
Molecular in vitro diagnostIC tests. Specification of pre-test procedures for venous whole blood. Part 3: Isolation of plasma circulating cell-free DNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第3部分：分离血浆循环游离DNA |
China National Standards IC |
English PDF |
| GB/T 43279.2-2023 |
Molecular in vitro diagnostIC tests. Specification of pre-test procedures on venous whole blood. Part 2: Isolation of genomic DNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第2部分：分离基因组DNA |
China National Standards IC |
English PDF |
| GB/T 43279.1-2023 |
Molecular in vitro diagnostIC tests. Specification of pre-test procedures for venous whole blood. Part 1: Isolation of cellular RNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第1部分：分离细胞RNA |
China National Standards IC |
English PDF |
| GB/T 43278-2023 |
MedICal Laboratory Risk Management Application in Medical Laboratory {译} 医学实验室 风险管理在医学实验室的应用 |
China National Standards IC |
English PDF |
| GB/T 43273-2023 |
Determination method of freeze-thaw stability of pestICides {译} 农药冻融稳定性测定方法 |
China National Standards IC |
English PDF |
| GB/T 43272-2023 |
Cyclofenac technICal product {译} 唑草酮原药 |
China National Standards IC |
English PDF |
| GB/T 24750-2023 |
Ethephon technICal drug {译} 乙烯利原药 |
China National Standards IC |
English PDF |
| GB/T 23554-2023 |
EtherIC solution {译} 乙烯利可溶液剂 |
China National Standards IC |
English PDF |
| GB/T 4541-2023 |
Marine life-saving equipment position indICator light {译} 船用救生设备示位灯 |
China National Standards IC |
English PDF |
| GB/T 43432.3-2023 |
MetallIC materials - Barcol hardness test Part 3: Calibration of standard hardness blocks {译} 金属材料 巴氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards IC |
English PDF |
| GB/T 43432.2-2023 |
MetallIC materials - Barcol hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 巴氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards IC |
English PDF |
| GB/T 16826-2023 |
Electro-hydraulIC servo universal testing machine {译} 电液伺服万能试验机 |
China National Standards IC |
English PDF |
| GB/T 43408-2023 |
Road VehICles Compressed Natural Gas (CNG) Refueling Connectors {译} 道路车辆 压缩天然气（CNG）加气连接器 |
China National Standards IC |
English PDF |
| GB/T 43407.3-2023 |
Road vehICles - Ergonomic requirements for driving areas of low-floor passenger buses running on dedicated lines - Part 3: Information devices and controls {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第3部分：信息装置和控制器 |
China National Standards IC |
English PDF |
| GB/T 43407.1-2023 |
Road vehICles Ergonomic requirements for driving areas of low-floor passenger buses running on dedicated lines Part 1: General description and basic requirements {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第1部分：总体描述和基本要求 |
China National Standards IC |
English PDF |
| GB/T 43405-2023 |
Enclosed trucks - technICal requirements and test methods for cargo isolation devices and securing points {译} 封闭式货车 货物隔离装置及系固点技术要求和试验方法 |
China National Standards IC |
English PDF |
| GB/T 43404-2023 |
Light vehICle road load chassis dynamometer reproduced {译} 轻型汽车道路负载 底盘测功机再现 |
China National Standards IC |
English PDF |
| GB/T 43403-2023 |
Road vehICles Trailers below 3.5t Quality inspection after fatigue test of welded traction brackets for connecting balls {译} 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards IC |
English PDF |
| GB/T 43401.1-2023 |
Road vehICles - Stabilizers for trailers and light trailers - Part 1: Integrated {译} 道路车辆 旅居挂车和轻型挂车稳定装置 第1部分：集成式 |
China National Standards IC |
English PDF |
| GB/T 43400-2023 |
Road vehICles Trailers below 3.5t Calculation of mechanical strength of steel drawbars {译} 道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
China National Standards IC |
English PDF |
| GB/T 43399-2023 |
Road VehICles Liquefied Natural Gas (LNG) Filling Connector 3.1MPa Connector {译} 道路车辆 液化天然气（LNG）加注连接器 3.1MPa连接器 |
China National Standards IC |
English PDF |
| GB/T 43382-2023 |
Normal direction of movement of hand controls on road vehICles {译} 道路车辆手控装置常规运动方向 |
China National Standards IC |
English PDF |
| GB/T 43332-2023 |
Safety requirements for conductive charging and discharging of electrIC vehicles {译} 电动汽车传导充放电安全要求 |
China National Standards IC |
English PDF |
| GB/T 43299-2023 |
Test method for electrIC heating performance of motor vehicle glass {译} 机动车玻璃电加热性能试验方法 |
China National Standards IC |
English PDF |
| GB/T 43267-2023 |
Road vehICles Expected functional safety {译} 道路车辆 预期功能安全 |
China National Standards IC |
English PDF |
| GB/T 43258.4-2023 |
Road vehICles Diagnostic communications over Internet Protocol (DoIP) Part 4: Ethernet-based high-speed data link connectors {译} 道路车辆 基于因特网协议的诊断通信 (DoIP) 第4部分: 基于以太网的高速数据链路连接器 |
China National Standards IC |
English PDF |
| GB/T 43258.3-2023 |
Road vehICles Diagnostic communications over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 {译} 道路车辆 基于因特网协议的诊断通信（DoIP） 第3部分：基于IEEE 802.3有线车辆接口 |
China National Standards IC |
English PDF |
| GB/T 43258.2-2023 |
Road vehICles Diagnostic communications over Internet Protocol (DoIP) Part 2: Transport protocols and network layer services {译} 道路车辆 基于因特网协议的诊断通信（DoIP） 第2部分：传输协议与网络层服务 |
China National Standards IC |
English PDF |
| GB/T 43255-2023 |
Test method for low temperature cold starting performance of fuel cell electrIC vehicles {译} 燃料电池电动汽车低温冷起动性能试验方法 |
China National Standards IC |
English PDF |
| GB/T 43254-2023 |
Functional safety requirements and test methods for drive motor systems for electrIC vehicles {译} 电动汽车用驱动电机系统功能安全要求及试验方法 |
China National Standards IC |
English PDF |
| GB/T 43253.4-2023 |
Road vehICles Functional safety audit and assessment methods Part 4: Hardware level {译} 道路车辆 功能安全审核及评估方法 第4部分：硬件层面 |
China National Standards IC |
English PDF |
| GB/T 43253.3-2023 |
Road vehICles - Functional safety audit and assessment methods Part 3: Software level {译} 道路车辆 功能安全审核及评估方法 第3部分：软件层面 |
China National Standards IC |
English PDF |
| GB/T 43253.2-2023 |
Road vehICles - Functional safety audit and assessment methods Part 2: Concept phase and system level {译} 道路车辆 功能安全审核及评估方法 第2部分：概念阶段和系统层面 |
China National Standards IC |
English PDF |
| GB/T 43253.1-2023 |
Road vehICles - Functional safety audit and assessment methods - Part 1: General requirements {译} 道路车辆 功能安全审核及评估方法 第1部分：通用要求 |
China National Standards IC |
English PDF |
| GB/T 43252-2023 |
Test method for energy consumption and driving range of fuel cell electrIC vehicles {译} 燃料电池电动汽车能量消耗量及续驶里程试验方法 |
China National Standards IC |
English PDF |
| GB/T 31467-2023 |
Test method for electrICal performance of lithium-ion power battery packs and systems for electric vehicles {译} 电动汽车用锂离子动力电池包和系统电性能试验方法 |
China National Standards IC |
English PDF |
| GB/T 28957.1-2023 |
Road vehICles - Test dusts for filter evaluation - Part 1: Silica test dusts {译} 道路车辆 用于滤清器评定的试验粉尘 第1部分：氧化硅试验粉尘 |
China National Standards IC |
English PDF |
| GB/T 26990-2023 |
Fuel cell electrIC vehicle on-board hydrogen system technical conditions {译} 燃料电池电动汽车 车载氢系统技术条件 |
China National Standards IC |
English PDF |
| GB/T 26777-2023 |
Trailer support devICe {译} 挂车支承装置 |
China National Standards IC |
English PDF |
| GB/T 19515-2023 |
Road vehICles reusability and recycling rates requirements and calculation methods {译} 道路车辆 可再利用率和可回收利用率 要求及计算方法 |
China National Standards IC |
English PDF |
| GB/T 17867-2023 |
Location of automobile hand controls, indICators and signaling devices {译} 汽车手操纵件、指示器及信号装置的位置 |
China National Standards IC |
English PDF |
| GB/T 12538-2023 |
Road vehICles - Determination of center of mass position {译} 道路车辆 质心位置的测定 |
China National Standards IC |
English PDF |
| GB/T 23101.4-2023 |
SurgICal implants Hydroxyapatite Part 4: Determination of coating bond strength {译} 外科植入物 羟基磷灰石 第4部分：涂层粘结强度的测定 |
China National Standards IC |
English PDF |
| GB/T 23101.3-2023 |
SurgICal implants Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity {译} 外科植入物 羟基磷灰石 第3部分：结晶度和相纯度的化学分析和表征 |
China National Standards IC |
English PDF |
| GB/T 43277.2-2023 |
Stop clamps and flow regulators for medICal infusion (blood transfusion) equipment Part 2: Liquid contact scale flow regulators {译} 医用输液（输血）器具用止流夹和流量调节器 第2部分：液体接触式刻度流量调节器 |
China National Standards IC |
English PDF |
| GB/T 43277.1-2023 |
Stop clamps and flow regulators for medICal infusion (blood transfusion) equipment Part 1: Non-liquid contact stop clamps and flow regulators {译} 医用输液（输血）器具用止流夹和流量调节器 第1部分：非液体接触式止流夹和流量调节器 |
China National Standards IC |
English PDF |
| GB/T 43274-2023 |
InorganIC soil conditioners - Determination of total calcium and magnesium content {译} 无机土壤调理剂 总钙和镁含量的测定 |
China National Standards IC |
English PDF |
| GB/T 7724-2023 |
ElectronIC weighing instrument {译} 电子称重仪表 |
China National Standards IC |
English PDF |
| GB/T 14157-2023 |
hydrogeologICal terminology {译} 水文地质术语 |
China National Standards IC |
English PDF |
| GB/T 10894-2023 |
Separation mechanICal noise test method {译} 分离机械噪声测试方法 |
China National Standards IC |
English PDF |
| GB/T 40853.2-2023 |
High frequency inductive components ElectrICal characteristics and measurement methods Part 2: Rated current of inductors for DC-DC converters {译} 高频感性元件 电特性及其测量方法 第2部分：DC-DC变换器用电感器额定电流 |
China National Standards IC |
English PDF |
| GB/T 28869.3-2023 |
MagnetIC cores made of soft magnetic materials - Measurement methods - Part 3: Magnetic properties at high excitation levels {译} 软磁材料制成的磁心 测量方法 第3部分：高励磁水平下的磁特性 |
China National Standards IC |
English PDF |
| GB/T 28869.2-2023 |
MagnetIC cores made of soft magnetic materials - Methods of measurement - Part 2: Magnetic properties at low excitation levels {译} 软磁材料制成的磁心 测量方法 第2部分：低励磁水平下的磁特性 |
China National Standards IC |
English PDF |
| GB/T 43232-2023 |
Fasteners - UltrasonIC measurement method of axial stress {译} 紧固件 轴向应力超声测量方法 |
China National Standards IC |
English PDF |
| GB/T 43259.302-2023 |
Energy Management System ApplICation Programming Interface (EMS-API) Part 302: Dynamic Part of the Common Information Model (CIM) {译} 能量管理系统应用程序接口（EMS-API）第302部分：公共信息模型（CIM）的动态部分 |
China National Standards IC |
English PDF |
| GB/T 43262-2023 |
ElectromagnetIC Interference Diagnostic Guidelines {译} 电磁干扰诊断导则 |
China National Standards IC |
English PDF |
| GB/T 43248-2023 |
ElectrIC and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz {译} 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法 |
China National Standards IC |
English PDF |
| GB/T 43346-2023 |
TechnICal conditions for starting and stopping the use of lead-acid batteries {译} 起停用铅酸蓄电池 技术条件 |
China National Standards IC |
English PDF |
| GB/T 5008.3-2023 |
Lead-acid batteries for starters Part 3: Product varieties, specifICations and terminal dimensions for heavy-duty vehicles {译} 起动用铅酸蓄电池 第3部分：重载车辆产品品种规格和端子尺寸 |
China National Standards IC |
English PDF |
| GB/T 5008.2-2023 |
Lead-acid batteries for starting use Part 2: Product variety specifICations and terminal dimensions and markings {译} 起动用铅酸蓄电池 第2部分：产品品种规格和端子尺寸、标记 |
China National Standards IC |
English PDF |
| GB/T 5008.1-2023 |
Lead-acid batteries for starting use Part 1: TechnICal conditions and test methods {译} 起动用铅酸蓄电池 第1部分：技术条件和试验方法 |
China National Standards IC |
English PDF |
| GB/T 14713-2023 |
General technICal conditions for rotary cutting machines {译} 旋切机通用技术条件 |
China National Standards IC |
English PDF |
| GB/T 43098.2-2023 |
Analysis methods for water treatment agents Part 2: Determination of arsenIC, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS) {译} 水处理剂分析方法 第2部分：砷、汞、镉、铬、铅、镍、铜含量的测定 电感耦合等离子体质谱法(ICP-MS) |
China National Standards IC |
English PDF |
| GB/T 23948-2023 |
InorganIC chemical products - general method for determination of water-insoluble matter {译} 无机化工产品 水不溶物测定通用方法 |
China National Standards IC |
English PDF |
| GB/T 23947.3-2023 |
General method for determination of arsenIC in inorganic chemical products Part 3: Atomic fluorescence spectrometry {译} 无机化工产品中砷测定的通用方法 第3部分：原子荧光光谱法 |
China National Standards IC |
English PDF |
| GB/T 17530.2-2023 |
Test methods for industrial acrylIC acid and esters Part 2: Determination of organic impurities and purity of industrial acrylic acid esters Gas chromatography {译} 工业丙烯酸及酯的试验方法 第2部分：工业用丙烯酸酯有机杂质及纯度的测定 气相色谱法 |
China National Standards IC |
English PDF |
| GB/T 17529.5-2023 |
AcrylIC acids and esters for industrial use Part 5: 2-Ethylhexyl acrylate for industrial use {译} 工业用丙烯酸及酯 第5部分：工业用丙烯酸2-乙基己酯 |
China National Standards IC |
English PDF |
| GB/T 17529.4-2023 |
AcrylIC acids and esters for industrial use Part 4: n-Butyl acrylate for industrial use {译} 工业用丙烯酸及酯 第4部分：工业用丙烯酸正丁酯 |
China National Standards IC |
English PDF |
| GB/T 17529.3-2023 |
AcrylIC acids and esters for industrial use Part 3: Ethyl acrylate for industrial use {译} 工业用丙烯酸及酯 第3部分：工业用丙烯酸乙酯 |
China National Standards IC |
English PDF |
| GB/T 17529.2-2023 |
AcrylIC acids and esters for industrial use Part 2: Methyl acrylate for industrial use {译} 工业用丙烯酸及酯 第2部分：工业用丙烯酸甲酯 |
China National Standards IC |
English PDF |
| GB/T 17529.1-2023 |
AcrylIC acids and esters for industrial use Part 1: Acrylic acid for industrial use {译} 工业用丙烯酸及酯 第1部分：工业用丙烯酸 |
China National Standards IC |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
